| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper resolution of path equivalence in Windows Backup Engine allows an authorized attacker to elevate privileges locally. |
| Protection mechanism failure in Windows PowerShell allows an authorized attacker to bypass a security feature locally. |
| Use after free in Windows Ancillary Function Driver for WinSock allows an authorized attacker to disclose information locally. |
| Out-of-bounds read in Windows DHCP Server allows an authorized attacker to deny service locally. |
| In Progress® Telerik® Document Processing Libraries prior to version 2026.3.1027, uncontrolled recursion, infinite loop, unchecked loop condition and inefficient regular expression vulnerabilities in RadSpreadProcessing and RadSpreadStreamProcessing allow an unauthenticated attacker to terminate or hang the host process via a crafted XLSX or XLS workbook or formula. |
| In Progress® Telerik® Document Processing Libraries prior to version 2026.3.1027, uncontrolled recursion, infinite loop, inefficient algorithmic complexity and resource allocation vulnerabilities in RadPdfProcessing and AI document summarization and question answering allow an unauthenticated attacker to terminate or hang the host process via a crafted PDF document or document text submitted for summarization or question answering. |
| Access of resource using incompatible type ('type confusion') in Windows Ancillary Function Driver for WinSock allows an authorized attacker to elevate privileges locally. |
| In Progress® Telerik® Document Processing Libraries prior to version 2026.3.1027, uncontrolled recursion, inefficient algorithmic complexity and infinite loop vulnerabilities in RadWordsProcessing allow an unauthenticated attacker to terminate or hang the host process via a crafted DOCX, DOC, RTF or HTML document. |
| In Progress® Telerik® Document Processing Libraries prior to version 2026.3.1027, improper verification of cryptographic signatures and improper certificate validation in RadPdfProcessing digital signature validation allow an unauthenticated attacker to cause signature validation to report forged content as unmodified and its signing certificate as valid via a crafted signed PDF document. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nVMX: Reset MMU back to the root MMU if loading L2 state fails for !VM-Entry
Reset the vCPU's MMU pointer back to the root MMU if loading L2 state fails
in the "not from VM-Entry" case, i.e. when emulating RSM or handling
KVM_SET_NESTED_STATE. Failure to unwind the MMU pointer results in KVM
trying to run L1 with a nested MMU, and is especially problematic if the
vCPU manages to free its nested state before the VM crashes. Constructing
the root for a nested EPT MMU goes through vmcs12, which is dynamically
allocated/freed when nVMX is enabled/disabled. And so if the nested state
is freed with the MMU still pointing at the nested MMU, KVM will hit a NULL
pointer deref when attempting to get L1=>L2 EPTP.
BUG: kernel NULL pointer dereference, address: 0000000000000078
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 114a2d067 P4D 111743067 PUD 11141f067 PMD 0
Oops: Oops: 0000 [#1] SMP
CPU: 20 UID: 1000 PID: 1272 Comm: nested_tdp_faul Not tainted 7.3.0-rc4-8c89f11d1a99b-sink-vm #1914 PREEMPTLAZY
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:nested_ept_get_eptp+0xb/0x10 [kvm_intel]
Call Trace:
<TASK>
kvm_mmu_load+0xcd/0x870 [kvm]
kvm_arch_vcpu_ioctl_run+0x18f5/0x1f80 [kvm]
kvm_vcpu_ioctl+0x2c7/0x970 [kvm]
__x64_sys_ioctl+0x90/0xd0
do_syscall_64+0x9c/0x4d0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x47491b
</TASK>
Modules linked in: kvm_intel kvm irqbypass
CR2: 0000000000000078
---[ end trace 0000000000000000 ]---
RIP: 0010:nested_ept_get_eptp+0xb/0x10 [kvm_intel]
[sean: write changelog] |
| In the Linux kernel, the following vulnerability has been resolved:
accel/rocket: search every core slot when looking up a scheduler
sched_to_core() walks rdev->cores[] up to rdev->num_cores, and
rocket_remove() decrements num_cores for every core it removes. Unbind a
core that is not the last one and the cores behind it fall outside the
search, so sched_to_core() returns NULL for a core that is still bound and
still running jobs. Neither caller checks the result:
rocket_job_run(): rocket_fence_create(core), core->dev
rocket_job_timedout(): dev_err(core->dev, "NPU job timed out")
Unbinding the middle core of the three on an RK3588 while three clients are
submitting to all of them faults twice, once from the surviving core's
job queue and once from its reset work:
KASAN: null-ptr-deref in range [0x0000000000000220-0x0000000000000227]
Workqueue: fdad0000.npu drm_sched_run_job_work [gpu_sched]
pc : rocket_job_run+0x234/0x838 [rocket]
Call trace:
rocket_job_run+0x234/0x838 [rocket]
drm_sched_run_job_work+0x2cc/0xad8 [gpu_sched]
process_one_work+0x640/0x14f0
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
Workqueue: rocket-reset-2 drm_sched_job_timedout [gpu_sched]
pc : rocket_job_timedout+0xf0/0x1e0 [rocket]
Call trace:
rocket_job_timedout+0xf0/0x1e0 [rocket]
drm_sched_job_timedout+0x188/0x6a0 [gpu_sched]
Both are the third core: the workqueue names are its device and its
core->index, and it was left at slot 2 while num_cores had dropped to 2.
Search all the slots that were allocated, the way find_core_for_dev() now
does. A core that is still bound is then found, and the two callers get
the pointer they already assume they have.
This does not make unbinding one core out of several safe. An open client
keeps an entity pointing at the scheduler of the core that went away:
drm_sched reports it as not ready for every job that lands on it, and the
client waits in dma_fence_default_wait for a fence that will never signal.
Stopping the NULL dereference is what belongs in a fix; the rest wants
more thought. |
| In the Linux kernel, the following vulnerability has been resolved:
firewire: core: fix race condition in split transaction handling
For a split transaction, either fw_core_handle_response() or
split_transaction_timeout_callback() may manipulate the same transaction
entry in the pending transaction list. The return value of timer_delete()
is used to determine which function handles the entry. If the transaction
is a split transaction and timer_delete() returns zero, the timeout
callback may already be running. In this case, the response handler must
leave the entry in the list for the timeout callback to remove.
A previous code refactoring broke this behavior, introducing a race
condition in which both functions could process the same transaction.
This could lead to a use-after-free on the transaction initiator side.
Fix the regression by ensuring that the response handler does not process
the transaction when timer_delete() returns zero. The timeout callback is
responsible for removing the entry from the pending transaction list. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/insn-eval: Fix shadowed segment index in get_seg_reg_override_idx()
Commit 45e1dccc0653 ("x86/insn: Simplify for_each_insn_prefix()") made
for_each_insn_prefix() declare its own loop counter named idx.
get_seg_reg_override_idx() keeps its result in a local of the same name,
so the assignments in the loop body now write the loop counter:
- the function always returns INAT_SEG_REG_DEFAULT, so FS and GS
overrides are ignored;
- a CS override sets the counter to INAT_SEG_REG_CS (2), the increment
makes it 3, and prefixes.bytes[3] holds the last prefix, 0x2e again,
so the loop never terminates.
The UMIP emulation reaches this from the #GP handler for user space: an
SGDT, SIDT or SMSW with a memory operand and a CS prefix leaves the task
spinning in the kernel, never returning to user space, with a SIGKILL
that is never delivered. Any user can thus tie up CPUs until reboot.
With an FS or GS prefix, the emulated result is written to the wrong
address.
Rename the internal macro iterator variable.
[ Lukas' original patch renamed the use site, I changed it to rename the
iterator in the macro instead, but left Lukas' commit message and
authorship - Linus ] |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: dwmac1000: clear the RGMII status interrupt
Since commit 2e2c878a3141 ("net: stmmac: remove SGMII/RGMII/SMII
interrupt handling") nothing on the RGMII path reads GMAC_RGSMIIIS, so
RGSMIIIS stays pending behind GMAC_INT_MASK from the first link change
on. stmmac_resume() resets the MAC in stmmac_hw_setup(); the reset sets
GMAC_INT_MASK to 0 until dwmac1000_core_init() writes the mask again,
and the pending status storms the line:
dwmac_dma_interrupt: unexpected status 04000000
A register dump at the first message on ODROID-HC4 showed it:
core int_status 00000001 int_mask 00000000 pmt 00000000 rgsmiiis 0000000d
When the resume thread runs on the CPU that takes the MAC interrupt,
the storm starves it: a soft lockup, then a watchdog reset or a hang.
Read GMAC_RGSMIIIS in dwmac1000_irq_status() when the status is not
masked, as the driver did before 2e2c878a3141; the read clears it.
Wake-on-LAN resume from s2idle with the resume thread and the MAC
interrupt on one CPU: Helios64 (dwmac-rk), 7.3-rc6, soft-locked in 3 of
3 resumes without a fix and in 0 of 10 with this patch; it ran with an
out-of-tree dwmac-rk change that keeps the GMAC powered across suspend.
ODROID-HC4 (dwmac-meson8b): 0 of 10 with this patch, 2 of 2 without a
fix on a 7.3-rc5 build. irq_rgmii_n went up by one per resume. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: mxc: fix race between chained IRQ handler install and probe completion
mxc_update_irq_chained_handler() is called before the IRQ domain, the
generic IRQ chip, and the port list entry are set up. If an interrupt
arrives in that window:
- mx3_gpio_irq_handler() calls generic_handle_domain_irq() with
port->domain still NULL.
- mx2_gpio_irq_handler() walks mxc_gpio_ports, but the port has not
been added to the list yet.
Additionally, if any of the subsequent probe steps
(gpio_generic_chip_init(), devm_gpiochip_add_data(),
irq_domain_create_legacy(), or mxc_gpio_init_gc()) fail, the error
paths never unregister the chained handler, leaving a dangling handler
that points at freed memory.
Move the handler installation after all its dependencies are ready and
after list_add_tail(), so the handler is never live while the data
structures it touches are incomplete, and is never installed if probe
fails. |
| In the Linux kernel, the following vulnerability has been resolved:
gpiolib: fix memory leak in gpiod_set_array_value_complex() on error paths
A drive-by review by Sashiko reports that, after a failed call to
gpiochip_set_multiple(), gpiod_set_array_value() returns abruptly,
bypassing the freeing of possibly alloced bitmaps, potentially leaking
memory. It is an unlikely error path, but is possible.
Defer the return code check until after the bitmap_free() block. |
| In the Linux kernel, the following vulnerability has been resolved:
calipso: keep BIG TCP payload_len in calipso_skbuff_setattr()
calipso_skbuff_setattr() adjusts payload_len by the length of the
option it inserts or resizes:
payload = ntohs(ip6_hdr->payload_len);
ip6_hdr->payload_len = htons(payload + len_delta);
GRO can build BIG TCP packets larger than IPV6_MAXPLEN, and stores
payload_len == 0 for them; ipv6_payload_len() then falls back to
skb->len. For such a packet forwarded to a destination mapped to
CALIPSO, the code above writes len_delta (or 65536 + len_delta when
shrinking) into payload_len, and ipv6_payload_len() no longer falls
back to skb->len. nf_tables, conntrack and sch_cake rely on it.
The same arithmetic also wraps when a packet grows past IPV6_MAXPLEN,
and a BIG TCP packet that shrinks below IPV6_MAXPLEN should get its
real length back.
Set payload_len from the skb length with ipv6_set_payload_len(), which
stores 0 above IPV6_MAXPLEN and the real length otherwise, as
ipv6_gro_complete() does. The network header was just reset to
skb->data, so skb->len - sizeof(*ip6_hdr) is the payload length.
Tested on one kernel (arm64, QEMU) with SELinux permissive, a minimal
mdp-generated policy (network_peer_controls=1), "netlabelctl calipso
add pass doi:16" and a NetLabel mapping of fd00:2::/64 to CALIPSO
DOI 16. calipso_skbuff_setattr() was called through
netlbl_skbuff_setattr() from a test-only debugfs hook (not part of
this patch) adding a level-only label; payload_len after the call:
case before fix after fix real length
1000, unlabeled 1016 1016 1016
70000 GSO, payload_len 0 16 0 70016
65530 GSO, grows past MAXPLEN 10 0 65546
65540 GSO with a 24 byte hop
header, shrinks below MAXPLEN 65528 65532 65532
1000 with a 24 byte hop header 992 992 992
(0 means ipv6_payload_len() returns the real length.) On the forward
path, with a client injecting unlabeled UDP through a router to a
server, the router adds the CALIPSO option and the server delivers all
datagrams (Udp6InDatagrams 5, Ip6InTruncatedPkts 0) with this patch. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bcmgenet: unshare the skb before writing the control block
bcmgenet stores first_cb, last_cb and bytes_sent in the skb control
block and reads them back on completion to free the skb and credit BQL.
ether_setup() leaves IFF_TX_SKB_SHARING set, so the stack can resubmit
a shared skb that is still in the ring. The next transmit overwrites
last_cb, so the earlier slots complete without crediting their bytes
and BQL stalls the queue until the watchdog resets it.
Unshare the skb before writing the control block.
Reproduce with pktgen in clone_skb mode, which hands the driver the same
skb while earlier copies are still in the ring:
modprobe pktgen
pg=/proc/net/pktgen
echo "add_device eth0" > $pg/kpktgend_0
echo "dst_mac AA:BB:CC:DD:EE:FF" > $pg/eth0
echo "dst 192.0.2.1" > $pg/eth0
echo "clone_skb 8" > $pg/eth0
echo "count 0" > $pg/eth0
echo start > $pg/pgctrl &
sleep 5
echo stop > $pg/pgctrl
wait
cat /sys/class/net/eth0/queues/tx-0/byte_queue_limits/inflight
inflight stays nonzero on the now idle queue. clone_skb 0 leaves it at
zero. |
| In the Linux kernel, the following vulnerability has been resolved:
net: au1000: move setting of netops to fix crash
au1000_probe() calls au1000_mii_probe(), which connects the PHY,
before dev->netdev_ops is assigned. phy_attach_direct() ->
phy_link_topo_add_phy() reads dev->netdev_ops through
netdev_need_ops_lock() since the commit in question, so probing crashes
with a NULL pointer dereference when CONFIG_NET_SHAPER is enabled.
Assign netdev_ops before the PHY attach, as was done for emac in commit
7c9f391ec89c ("net: emac: move setting of netops to fix crash"). |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: actions: Move setting of netops to fix crash
owl_emac_probe() calls owl_emac_phy_init(), which connects the PHY,
before netdev->netdev_ops is assigned. phy_attach_direct() ->
phy_link_topo_add_phy() reads dev->netdev_ops through
netdev_need_ops_lock() since the commit in question, so probing crashes
with a NULL pointer dereference when CONFIG_NET_SHAPER is enabled.
Assign netdev_ops before the PHY attach, as was done for emac in commit
7c9f391ec89c ("net: emac: move setting of netops to fix crash"). |
