| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (corsair-psu) Stop device IO before calling hid_hw_stop
hid_hw_stop() does not stop the device IO.
This results in a race condition between hid_input_report() and the point
immediately following the execution of hid_device_io_start() within
corsairpsu_probe(). If the probe operation fails after "io start" has
been initiated, this race condition will result in a uaf vulnerability
[1].
CPU0 CPU1
==== ====
corsairpsu_probe()
hid_device_io_start()
... unlock driver_input_lock
hid_hw_stop()
kfree(hidraw) __hid_input_report()
... acquire driver_input_lock
hid_report_raw_event()
hidraw_report_event()
... access hidraw's list_lock // trigger uaf
Consequently, when corsairpsu_probe() fails and hid_hw_stop() needs to
be executed, the io_started flag is first cleared while holding the
driver_input_lock to prevent potential race conditions involving input
reports.
[1]
BUG: KASAN: slab-use-after-free in rt_spin_lock+0x83/0x400 kernel/locking/spinlock_rt.c:56
Call Trace:
hidraw_report_event+0x5d/0x3a0 drivers/hid/hidraw.c:577
hid_report_raw_event+0x311/0x1730 drivers/hid/hid-core.c:2076
__hid_input_report drivers/hid/hid-core.c:2152 [inline]
hid_input_report+0x44e/0x580 drivers/hid/hid-core.c:2174
hid_irq_in+0x47e/0x6d0 drivers/hid/usbhid/hid-core.c:286
__usb_hcd_giveback_urb+0x3b3/0x5e0 drivers/usb/core/hcd.c:1657
dummy_timer+0x8a9/0x47d0 drivers/usb/gadget/udc/dummy_hcd.c:2005
Allocated by task 10:
hidraw_connect+0x57/0x430 drivers/hid/hidraw.c:606
hid_connect+0x5bf/0x19d0 drivers/hid/hid-core.c:2277
hid_hw_start+0xa8/0x120 drivers/hid/hid-core.c:2387
corsairpsu_probe+0xd9/0x3c0 drivers/hwmon/corsair-psu.c:782
Freed by task 10:
hidraw_disconnect+0x4f/0x60 drivers/hid/hidraw.c:662
hid_disconnect drivers/hid/hid-core.c:2362 [inline]
hid_hw_stop+0x101/0x1e0 drivers/hid/hid-core.c:2407
corsairpsu_probe+0x327/0x3c0 drivers/hwmon/corsair-psu.c:826
Fix the problem by calling hid_device_io_stop() before calling
hid_hw_stop().
[groeck: Updated subject and description;
call hid_device_io_stop() only if IO has been started] |
| In the Linux kernel, the following vulnerability has been resolved:
fuse-uring: make a fuse_req on SQE commit only findable after memcpy
Bad userspace might try to trick us and send commit SQEs request
unique / commit-id of requests that are not even send to
fuse-server (io_uring_cmd_done() not called) yet.
fuse_uring_commit_fetch() ends the fuse request when the ring entry
has a wrong state, but that could have caused a use-after-free
with the memcpy operations in fuse_uring_send_in_task().
In order to avoid such races the call of fuse_uring_add_to_pq()
is moved after the copy operations and just before completing
the io-uring request - malicious userspace cannot find the request
anymore until all prepration work in fuse-client/kernel is completed.
This also moves fuse_uring_add_to_pq() a bit up in the code to
avoid a forward declaration. Also not with a preparation commit,
to make it easier to back port to older kernels. |
| In the Linux kernel, the following vulnerability has been resolved:
netdev: fix double-free in netdev_nl_bind_rx_doit()
Sashiko flags that genlmsg_reply() always consumes the skb.
The error path calls nlmsg_free(rsp) so we can't jump directly
to it. Let's not unbind, just propagate the error to the user.
This is the typical way of handling genlmsg_reply() failures.
They shouldn't happen unless user does something silly like
calling the kernel with an already-full rcvbuf. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-pf: fix double free in rvu_rep_rsrc_init()
rvu_rep_rsrc_init() allocates queue memory before calling
otx2_init_hw_resources(). When hardware resource setup fails,
otx2_init_hw_resources() already unwinds the partially initialized
SQ, CQ, and aura state before returning an error. The representor
error path then calls otx2_free_hw_resources() again and can free
the same resources a second time.
Fix this by splitting the cleanup labels so that a failure from
otx2_init_hw_resources() only releases queue memory. Keep the
otx2_free_hw_resources() call for failures that happen after
hardware resource initialization completed successfully.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1-rc3.
Runtime validation was not performed because reproducing this path
requires OcteonTX2 representor hardware. |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: mdb: Fix source list corruption on a failed replace
When replacing the source list of an MDB remote entry, all existing
sources are first marked for deletion and vxlan_mdb_remote_srcs_add()
is then called to add the new source list. Sources present in the new
list have their deletion mark cleared, and any sources left marked
afterwards are removed.
If vxlan_mdb_remote_srcs_add() fails partway through, its error path
deletes all entries on the remote's source list. That rollback is only
correct for its other caller, vxlan_mdb_remote_add(), where the remote
was just allocated and the list contains solely entries added during
the call. On the replace path the list also holds pre-existing sources,
so a failed replace tears them down together with their (S, G)
forwarding entries instead of leaving the entry unchanged.
This is reachable from an existing (*, G) remote. An EXCLUDE filter
that loses sources starts forwarding traffic that should be blocked,
while an INCLUDE filter that loses sources drops traffic that should be
forwarded.
Mark entries created during the current pass with a new
VXLAN_SGRP_F_NEW flag. On failure, delete only those entries and clear
the deletion mark on the pre-existing ones, so a failed replace leaves
the source list untouched. Retain the flag until the whole operation
succeeds and then clear it. Also stop vxlan_mdb_remote_src_add() from
deleting a pre-existing entry it only looked up when adding that
entry's forwarding entry fails. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix resource leak on mmiotrace trace_pipe close
The mmiotrace tracer was added May 12th 2008. At that time, resources
created in pipe_open() could not be freed because there was not
pipe_close function pointer of the tracer. The pipe_close function pointer
was added in December 7th, 2009, but the mmiotrace tracer was not updated.
mmio_pipe_open() allocates a header_iter and takes a pci_dev reference
when trace_pipe is opened. mmio_close() frees them, but it was only
wired to the tracer's .close callback.
tracing_release_pipe() invokes .pipe_close, not .close, when the
trace_pipe file is released. As a result, closing trace_pipe with the
mmiotrace tracer active leaked the header_iter allocation and left a
stale pci_dev reference.
Set .pipe_close to mmio_close, matching how function_graph wires both
callbacks to the same handler.
Note, if the trace_pipe is read to completion, it will clean up the
resources, but if one were to run:
# head -n 1 /sys/kernel/tracing/trace_pipe
VERSION 20070824
Over and over again, it would trigger a massive leak. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: nsm: pin the module while the device is open
misc_open() installs a misc driver's file operations with fops_get(),
which pins file_operations::owner before replacing the file's f_op. The
NSM misc device leaves nsm_dev_fops.owner unset, so opening /dev/nsm does
not take a module reference on the nsm driver.
If the driver is built as a module, an open file descriptor can therefore
survive rmmod of the module that provides its ioctl callbacks. A later
ioctl through that descriptor can call into unloaded module text.
Set nsm_dev_fops.owner to THIS_MODULE so the misc core holds the module
while any /dev/nsm file descriptor is open, matching the lifetime
expectation for the installed file operations. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: set new_stream to NULL after release
In dm_update_crtc_state(), the skip_modeset path releases new_stream
via dc_stream_release() but does not set the pointer to NULL.
If a later error (e.g., color management failure) triggers the fail
label, the error path calls dc_stream_release() again on the same
dangling pointer, causing a double release and potential use-after-free.
Fix this by setting new_stream to NULL after the initial release.
(cherry picked from commit 99f3af19073b3ddbfd96e789124cce12c4277b28) |
| A memory corruption vulnerability in WatchGuard Fireware OS may allow an unauthenticated attacker to trigger a Denial of Service (DoS) condition in the Mobile User VPN with IKEv2 and the Branch Office VPN using IKEv2 when configured with a dynamic gateway peer. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: qcom-cpufreq-hw: Fix possible double free
qcom_cpufreq.data is allocated with devm_kzalloc() in probe() as an
array of per-domain data. qcom_cpufreq_hw_cpu_init() stores a pointer to
one element of this array in policy->driver_data.
qcom_cpufreq_hw_cpu_exit() currently calls kfree() on policy->driver_data.
This is not valid because the memory is devm-managed. For the first
domain, this can free the devm-managed allocation while the devres entry
is still active, leading to a possible double free when the platform
device is later detached. For other domains, the pointer may refer to an
element inside the array rather than the allocation base.
Remove the kfree(data) call and let devres release qcom_cpufreq.data.
This issue was found by a static analysis tool I am developing. |
| In the Linux kernel, the following vulnerability has been resolved:
efi/libstub: Free correct pointer on failure
cmdline_ptr is an out parameter, which is not allocated by the function
itself, and likely points into the caller's stack.
cmdline refers to the pool allocation that should be freed when cleaning
up after a failure, so pass this instead to free_pool(). |
| In the Linux kernel, the following vulnerability has been resolved:
bluetooth/hci: disallow setting handle bigger than HCI_CONN_HANDLE_MAX
Syzbot hit warning in hci_conn_del() caused by freeing handle that was
not allocated using ida allocator.
This is caused by handle bigger than HCI_CONN_HANDLE_MAX passed by
hci_le_big_sync_established_evt(), which makes code think it's unset
connection.
Add same check for handle upper bound as in hci_conn_set_handle() to
prevent warning. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix kernel crash during resume
Currently during resume, QMI target memory is not properly handled, resulting
in kernel crash in case DMA remap is not supported:
BUG: Bad page state in process kworker/u16:54 pfn:36e80
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x36e80
page dumped because: nonzero _refcount
Call Trace:
bad_page
free_page_is_bad_report
__free_pages_ok
__free_pages
dma_direct_free
dma_free_attrs
ath12k_qmi_free_target_mem_chunk
ath12k_qmi_msg_mem_request_cb
The reason is:
Once ath12k module is loaded, firmware sends memory request to host. In case
DMA remap not supported, ath12k refuses the first request due to failure in
allocating with large segment size:
ath12k_pci 0000:04:00.0: qmi firmware request memory request
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 7077888
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 8454144
ath12k_pci 0000:04:00.0: qmi dma allocation failed (7077888 B type 1), will try later with small size
ath12k_pci 0000:04:00.0: qmi delays mem_request 2
ath12k_pci 0000:04:00.0: qmi firmware request memory request
Later firmware comes back with more but small segments and allocation
succeeds:
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 262144
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 65536
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
Now ath12k is working. If suspend is triggered, firmware will be reloaded
during resume. As same as before, firmware requests two large segments at
first. In ath12k_qmi_msg_mem_request_cb() segment count and size are
assigned:
ab->qmi.mem_seg_count == 2
ab->qmi.target_mem[0].size == 7077888
ab->qmi.target_mem[1].size == 8454144
Then allocation failed like before and ath12k_qmi_free_target_mem_chunk()
is called to free all allocated segments. Note the first segment is skipped
because its v.addr is cleared due to allocation failure:
chunk->v.addr = dma_alloc_coherent()
Also note that this leaks that segment because it has not been freed.
While freeing the second segment, a size of 8454144 is passed to
dma_free_coherent(). However remember that this segment is allocated at
the first time firmware is loaded, before suspend. So its real size is
524288, much smaller than 8454144. As a result kernel found we are freeing
some memory which is in use and thus cras
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
mm/slab: make __free(kfree) accept error pointers
Currently, if an automatically freed allocation is an error pointer that
will lead to a crash. An example of this is in wm831x_gpio_dbg_show().
171 char *label __free(kfree) = gpiochip_dup_line_label(chip, i);
172 if (IS_ERR(label)) {
173 dev_err(wm831x->dev, "Failed to duplicate label\n");
174 continue;
175 }
The auto clean up function should check for error pointers as well,
otherwise we're going to keep hitting issues like this. |
| In the Linux kernel, the following vulnerability has been resolved:
ftrace: Fix NULL pointer dereference in is_ftrace_trampoline when ftrace is dead
ftrace_startup does not remove ops from ftrace_ops_list when
ftrace_startup_enable fails:
register_ftrace_function
ftrace_startup
__register_ftrace_function
...
add_ftrace_ops(&ftrace_ops_list, ops)
...
...
ftrace_startup_enable // if ftrace failed to modify, ftrace_disabled is set to 1
...
return 0 // ops is in the ftrace_ops_list.
When ftrace_disabled = 1, unregister_ftrace_function simply returns without doing anything:
unregister_ftrace_function
ftrace_shutdown
if (unlikely(ftrace_disabled))
return -ENODEV; // return here, __unregister_ftrace_function is not executed,
// as a result, ops is still in the ftrace_ops_list
__unregister_ftrace_function
...
If ops is dynamically allocated, it will be free later, in this case,
is_ftrace_trampoline accesses NULL pointer:
is_ftrace_trampoline
ftrace_ops_trampoline
do_for_each_ftrace_op(op, ftrace_ops_list) // OOPS! op may be NULL!
Syzkaller reports as follows:
[ 1203.506103] BUG: kernel NULL pointer dereference, address: 000000000000010b
[ 1203.508039] #PF: supervisor read access in kernel mode
[ 1203.508798] #PF: error_code(0x0000) - not-present page
[ 1203.509558] PGD 800000011660b067 P4D 800000011660b067 PUD 130fb8067 PMD 0
[ 1203.510560] Oops: 0000 [#1] SMP KASAN PTI
[ 1203.511189] CPU: 6 PID: 29532 Comm: syz-executor.2 Tainted: G B W 5.10.0 #8
[ 1203.512324] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 1203.513895] RIP: 0010:is_ftrace_trampoline+0x26/0xb0
[ 1203.514644] Code: ff eb d3 90 41 55 41 54 49 89 fc 55 53 e8 f2 00 fd ff 48 8b 1d 3b 35 5d 03 e8 e6 00 fd ff 48 8d bb 90 00 00 00 e8 2a 81 26 00 <48> 8b ab 90 00 00 00 48 85 ed 74 1d e8 c9 00 fd ff 48 8d bb 98 00
[ 1203.518838] RSP: 0018:ffffc900012cf960 EFLAGS: 00010246
[ 1203.520092] RAX: 0000000000000000 RBX: 000000000000007b RCX: ffffffff8a331866
[ 1203.521469] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 000000000000010b
[ 1203.522583] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffff8df18b07
[ 1203.523550] R10: fffffbfff1be3160 R11: 0000000000000001 R12: 0000000000478399
[ 1203.524596] R13: 0000000000000000 R14: ffff888145088000 R15: 0000000000000008
[ 1203.525634] FS: 00007f429f5f4700(0000) GS:ffff8881daf00000(0000) knlGS:0000000000000000
[ 1203.526801] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1203.527626] CR2: 000000000000010b CR3: 0000000170e1e001 CR4: 00000000003706e0
[ 1203.528611] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1203.529605] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Therefore, when ftrace_startup_enable fails, we need to rollback registration
process and remove ops from ftrace_ops_list. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix crash during module load unload test
During purex packet handling the driver was incorrectly freeing a
pre-allocated structure. Fix this by skipping that entry.
System crashed with the following stack during a module unload test.
Call Trace:
sbitmap_init_node+0x7f/0x1e0
sbitmap_queue_init_node+0x24/0x150
blk_mq_init_bitmaps+0x3d/0xa0
blk_mq_init_tags+0x68/0x90
blk_mq_alloc_map_and_rqs+0x44/0x120
blk_mq_alloc_set_map_and_rqs+0x63/0x150
blk_mq_alloc_tag_set+0x11b/0x230
scsi_add_host_with_dma.cold+0x3f/0x245
qla2x00_probe_one+0xd5a/0x1b80 [qla2xxx]
Call Trace with slub_debug and debug kernel:
kasan_report_invalid_free+0x50/0x80
__kasan_slab_free+0x137/0x150
slab_free_freelist_hook+0xc6/0x190
kfree+0xe8/0x2e0
qla2x00_free_device+0x3bb/0x5d0 [qla2xxx]
qla2x00_remove_one+0x668/0xcf0 [qla2xxx] |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: pcc: fix use-after-free and double free in _OSC evaluation
pcc_cpufreq_do_osc() calls acpi_evaluate_object() twice for the
two-phase _OSC negotiation. Between the two calls it freed
output.pointer but left output.length unchanged. Since
acpi_evaluate_object() treats a non-zero length with a non-NULL
pointer as an existing buffer to write into, the second call wrote
into freed memory (use-after-free). The subsequent kfree(output.pointer)
at out_free then freed the same pointer a second time (double free).
Reset output.pointer to NULL and output.length to ACPI_ALLOCATE_BUFFER
after freeing the first result, so ACPICA allocates a fresh buffer for
each phase independently. |
| A Double Free vulnerability in open-iscsi allows an unauthenticated MITM attacker to cause DoS.
This issue affects open-iscsi: from ? through 56718d4e9d1a4f51c30697b5c0534144bb41c9bb. |
| A double free vulnerability was discovered in the HDF5 library. Processing a crafted HDF5 file containing an oversized chunk size field via h5repack may cause the application to abort due to a double free. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: defensively unhash xfrm_state lists in __xfrm_state_delete
KASAN reproduces a slab-use-after-free in __xfrm_state_delete()'s
hlist_del_rcu calls under syzkaller load on linux-6.12.y stable
(reproduced on 6.12.47, also reachable via the same code path on
torvalds/master and on the ipsec tree). Nine unique signatures cluster
in the xfrm_state lifecycle, the load-bearing one being:
BUG: KASAN: slab-use-after-free in __hlist_del include/linux/list.h:990 [inline]
BUG: KASAN: slab-use-after-free in hlist_del_rcu include/linux/rculist.h:516 [inline]
BUG: KASAN: slab-use-after-free in __xfrm_state_delete net/xfrm/xfrm_state.c
Write of size 8 at addr ffff8881198bcb70 by task kworker/u8:9/435
Workqueue: netns cleanup_net
Call Trace:
__hlist_del / hlist_del_rcu
__xfrm_state_delete
xfrm_state_delete
xfrm_state_flush
xfrm_state_fini
ops_exit_list
cleanup_net
The other observed signatures hit the same slab object from
__xfrm_state_lookup, xfrm_alloc_spi, __xfrm_state_insert and an OOB
write variant of __xfrm_state_delete, all on the byseq/byspi
hash chains.
__xfrm_state_delete() guards its byseq and byspi unhashes with
value-based predicates:
if (x->km.seq)
hlist_del_rcu(&x->byseq);
if (x->id.spi)
hlist_del_rcu(&x->byspi);
while everywhere else in the file (e.g. state_cache, state_cache_input)
the safer hlist_unhashed() check is used. xfrm_alloc_spi() sets
x->id.spi = newspi inside xfrm_state_lock and then immediately inserts
into byspi, but a path that observes x->id.spi != 0 outside of
xfrm_state_lock can still skip-or-hit the byspi unhash inconsistently
with whether x is actually on the list. The same holds for x->km.seq
versus byseq, and the bydst/bysrc unhashes have no predicate at all,
so a second __xfrm_state_delete() on the same object writes through
LIST_POISON pprev.
The defensive change here:
- Use hlist_del_init_rcu() instead of hlist_del_rcu() on bydst,
bysrc, byseq and byspi so a second deletion is a no-op rather
than a write through LIST_POISON pprev. The byseq/byspi nodes
are already initialised in xfrm_state_alloc().
- Test hlist_unhashed() rather than the value predicate for
byseq/byspi, so the unhash decision tracks list state rather than
mutable scalar fields.
Empirical verification: applied this patch on top of v6.12.47, rebuilt,
and re-ran the same syzkaller harness for 1h16m on a previously-crashy
configuration that produced ~100 hits each of slab-use-after-free
Read in xfrm_alloc_spi / Read in __xfrm_state_lookup / Write in
__xfrm_state_delete. After the patch, 7.1M execs across 32 VMs at
~1550 exec/sec produced zero xfrm_state UAF/OOB hits. /proc/slabinfo
confirms the xfrm_state slab is actively allocated and freed during
the run (~143 KiB resident), so the fuzzer is still exercising those
code paths -- they just no longer crash.
Reproduction:
- Linux 6.12.47 x86_64 + KASAN_GENERIC + KASAN_INLINE + KCOV
- syzkaller @ 746545b8b1e4c3a128db8652b340d3df90ce61db
- 32 QEMU/KVM VMs x 2 vCPU on AWS c5.metal bare metal
- 9 unique signatures collected in ~9h, all within xfrm_state
lifecycle |
