| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| osslsigncode is a tool that implements Authenticode signing and timestamping. Prior to 2.12, A stack buffer overflow vulnerability exists in osslsigncode in several signature verification paths. During verification of a PKCS#7 signature, the code copies the digest value from a parsed SpcIndirectDataContent structure into a fixed-size stack buffer (mdbuf[EVP_MAX_MD_SIZE], 64 bytes) without validating that the source length fits within the destination buffer. This pattern is present in the verification handlers for PE, MSI, CAB, and script files. An attacker can craft a malicious signed file with an oversized digest field in SpcIndirectDataContent. When a user verifies such a file with osslsigncode verify, the unbounded memcpy can overflow the stack buffer and corrupt adjacent stack state. This vulnerability is fixed in 2.12. |
| osslsigncode is a tool that implements Authenticode signing and timestamping. Prior to 2.13, an integer underflow vulnerability exists in osslsigncode version 2.12 and earlier in the PE page-hash computation code (pe_page_hash_calc()). When page hash processing is performed on a PE file, the function subtracts hdrsize from pagesize without first validating that pagesize >= hdrsize. If a malicious PE file sets SizeOfHeaders (hdrsize) larger than SectionAlignment (pagesize), the subtraction underflows and produces a very large unsigned length. The code allocates a zero-filled buffer of pagesize bytes and then attempts to hash pagesize - hdrsize bytes from that buffer. After the underflow, this results in an out-of-bounds read from the heap and can crash the process. The vulnerability can be triggered while signing a malicious PE file with page hashing enabled (-ph), or while verifying a malicious signed PE file that already contains page hashes. Verification of an already signed file does not require the verifier to pass -ph. This vulnerability is fixed in 2.13. |
| osslsigncode is a tool that implements Authenticode signing and timestamping. Prior to 2.13, an out-of-bounds read vulnerability exists in osslsigncode version 2.12 and earlier in the PE page-hash computation code (pe_page_hash_calc()). When processing PE sections for page hashing, the function uses PointerToRawData and SizeOfRawData values from section headers without validating that the referenced region lies within the mapped file. An attacker can craft a PE file with section headers that point beyond the end of the file. When osslsigncode computes page hashes for such a file, it may attempt to hash data from an invalid memory region, causing an out-of-bounds read and potentially crashing the process. The vulnerability can be triggered while signing a malicious PE file with page hashing enabled (-ph), or while verifying a malicious signed PE file that already contains page hashes. Verification of an already signed file does not require the verifier to pass -ph. This vulnerability is fixed in 2.13. |
| Mercure is a protocol for pushing data updates to web browsers and other HTTP clients in a battery-efficient way. Prior to 0.22.0, a cache key collision vulnerability in TopicSelectorStore allows an attacker to poison the match result cache, potentially causing private updates to be delivered to unauthorized subscribers or blocking delivery to authorized ones. The cache key was constructed by concatenating the topic selector and topic with an underscore separator. Because both topic selectors and topics can contain underscores, two distinct pairs can produce the same key. An attacker who can subscribe to the hub or publish updates with crafted topic names can exploit this to bypass authorization checks on private updates. This vulnerability is fixed in 0.22.0. |
| OpenCTI is an open source platform for managing cyber threat intelligence knowledge and observables. Prior to 6.9.5, the safeEjs.ts file does not properly sanitize EJS templates. Users with the Manage customization capability can run arbitrary JavaScript in the context of the OpenCTI platform process during notifier template execution. This vulnerability is fixed in 6.9.5. |
| Unhead is a document head and template manager. Prior to 2.1.13, useHeadSafe() is the composable that Nuxt's own documentation explicitly recommends for rendering user-supplied content in <head> safely. Internally, the hasDangerousProtocol() function in packages/unhead/src/plugins/safe.ts decodes HTML entities before checking for blocked URI schemes (javascript:, data:, vbscript:). The decoder uses two regular expressions with fixed-width digit caps. The HTML5 specification imposes no limit on leading zeros in numeric character references. When a padded entity exceeds the regex digit cap, the decoder silently skips it. The undecoded string is then passed to startsWith('javascript:'), which does not match. makeTagSafe() writes the raw value directly into SSR HTML output. The browser's HTML parser decodes the padded entity natively and constructs the blocked URI. This vulnerability is fixed in 2.1.13. |
| Wasmtime is a runtime for WebAssembly. Prior to 24.0.7, 36.0.7, 42.0.2, and 43.0.1, Wasmtime's implementation of transcoding strings into the Component Model's utf16 or latin1+utf16 encodings improperly verified the alignment of reallocated strings. This meant that unaligned pointers could be passed to the host for transcoding which would trigger a host panic. This panic is possible to trigger from malicious guests which transfer very specific strings across components with specific addresses. Host panics are considered a DoS vector in Wasmtime as the panic conditions are controlled by the guest in this situation. This vulnerability is fixed in 24.0.7, 36.0.7, 42.0.2, and 43.0.1. |
| Wasmtime is a runtime for WebAssembly. Prior to 24.0.7, 36.0.7, 42.0.2, and 43.0.1, Wasmtime contains a possible panic which can happen when a flags-typed component model value is lifted with the Val type. If bits are set outside of the set of flags the component model specifies that these bits should be ignored but Wasmtime will panic when this value is lifted. This panic only affects wasmtime's implementation of lifting into Val, not when using the flags! macro. This additionally only affects flags-typed values which are part of a WIT interface. This has the risk of being a guest-controlled panic within the host which Wasmtime considers a DoS vector. This vulnerability is fixed in 24.0.7, 36.0.7, 42.0.2, and 43.0.1. |
| Wasmtime is a runtime for WebAssembly. From 25.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's Winch compiler contains a vulnerability where the compilation of the table.fill instruction can result in a host panic. This means that a valid guest can be compiled with Winch, on any architecture, and cause the host to panic. This represents a denial-of-service vulnerability in Wasmtime due to guests being able to trigger a panic. The specific issue is that a historical refactoring changed how compiled code referenced tables within the table.* instructions. This refactoring forgot to update the Winch code paths associated as well, meaning that Winch was using the wrong indexing scheme. Due to the feature support of Winch the only problem that can result is tables being mixed up or nonexistent tables being used, meaning that the guest is limited to panicking the host (using a nonexistent table), or executing spec-incorrect behavior and modifying the wrong table. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. |
| Wasmtime is a runtime for WebAssembly. From 32.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's Cranelift compilation backend contains a bug on aarch64 when performing a certain shape of heap accesses which means that the wrong address is accessed. When combined with explicit bounds checks a guest WebAssembly module this can create a situation where there are two diverging computations for the same address: one for the address to bounds-check and one for the address to load. This difference in address being operated on means that a guest module can pass a bounds check but then load a different address. Combined together this enables an arbitrary read/write primitive for guest WebAssembly when accesssing host memory. This is a sandbox escape as guests are able to read/write arbitrary host memory. This vulnerability has a few ingredients, all of which must be met, for this situation to occur and bypass the sandbox restrictions. This miscompiled shape of load only occurs on 64-bit WebAssembly linear memories, or when Config::wasm_memory64 is enabled. 32-bit WebAssembly is not affected. Spectre mitigations or signals-based-traps must be disabled. When spectre mitigations are enabled then the offending shape of load is not generated. When signals-based-traps are disabled then spectre mitigations are also automatically disabled. The specific bug in Cranelift is a miscompile of a load of the shape load(iadd(base, ishl(index, amt))) where amt is a constant. The amt value is masked incorrectly to test if it's a certain value, and this incorrect mask means that Cranelift can pattern-match this lowering rule during instruction selection erroneously, diverging from WebAssembly's and Cranelift's semantics. This incorrect lowering would, for example, load an address much further away than intended as the correct address's computation would have wrapped around to a smaller value insetad. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. |
| Wasmtime is a runtime for WebAssembly. From 28.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's implementation of its pooling allocator contains a bug where in certain configurations the contents of linear memory can be leaked from one instance to the next. The implementation of resetting the virtual memory permissions for linear memory used the wrong predicate to determine if resetting was necessary, where the compilation process used a different predicate. This divergence meant that the pooling allocator incorrectly deduced at runtime that resetting virtual memory permissions was not necessary while compile-time determine that virtual memory could be relied upon. The pooling allocator must be in use, Config::memory_guard_size configuration option must be 0, Config::memory_reservation configuration must be less than 4GiB, and pooling allocator must be configured with max_memory_size the same as the memory_reservation value in order to exploit this vulnerability. If all of these conditions are applicable then when a linear memory is reused the VM permissions of the previous iteration are not reset. This means that the compiled code, which is assuming out-of-bounds loads will segfault, will not actually segfault and can read the previous contents of linear memory if it was previously mapped. This represents a data leakage vulnerability between guest WebAssembly instances which breaks WebAssembly's semantics and additionally breaks the sandbox that Wasmtime provides. Wasmtime is not vulnerable to this issue with its default settings, nor with the default settings of the pooling allocator, but embeddings are still allowed to configure these values to cause this vulnerability. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. |
| Beszel is a server monitoring platform. Prior to 0.18.7, some API endpoints in the Beszel hub accept a user-supplied system ID and proceed without further checks that the user should have access to that system. As a result, any authenticated user can access these routes for any system if they know the system's ID. System IDs are random 15 character alphanumeric strings, and are not exposed to all users. However, it is theoretically possible for an authenticated user to enumerate a valid system ID via web API. To use the containers endpoints, the user would also need to enumerate a container ID, which is 12 digit hexadecimal string. This vulnerability is fixed in 0.18.7. |
| LangChain is a framework for building agents and LLM-powered applications. Prior to 0.3.84 and 1.2.28, LangChain's f-string prompt-template validation was incomplete in two respects. First, some prompt template classes accepted f-string templates and formatted them without enforcing the same attribute-access validation as PromptTemplate. In particular, DictPromptTemplate and ImagePromptTemplate could accept templates containing attribute access or indexing expressions and subsequently evaluate those expressions during formatting. Second, f-string validation based on parsed top-level field names did not reject nested replacement fields inside format specifiers. In this pattern, the nested replacement field appears in the format specifier rather than in the top-level field name. As a result, earlier validation based on parsed field names did not reject the template even though Python formatting would still attempt to resolve the nested expression at runtime. This vulnerability is fixed in 0.3.84 and 1.2.28. |
| Two potential heap out-of-bounds write locations existed in DecodeObjectId() in wolfcrypt/src/asn.c. First, a bounds check only validates one available slot before writing two OID arc values (out[0] and out[1]), enabling a 2-byte out-of-bounds write when outSz equals 1. Second, multiple callers pass sizeof(decOid) (64 bytes on 64-bit platforms) instead of the element count MAX_OID_SZ (32), causing the function to accept crafted OIDs with 33 or more arcs that write past the end of the allocated buffer. |
| nimiq-blockchain provides persistent block storage for Nimiq's Rust implementation. In 1.3.0 and earlier, block timestamp validation enforces that timestamp >= parent.timestamp for non-skip blocks and timestamp == parent.timestamp + MIN_PRODUCER_TIMEOUT for skip blocks, but there is no visible upper bound check against the wall clock. A malicious block-producing validator can set block timestamps arbitrarily far in the future. This directly affects reward calculations via Policy::supply_at() and batch_delay() in blockchain/src/reward.rs, inflating the monetary supply beyond the intended emission schedule. |
| A vulnerability has been found in D-Link DIR-605L 2.13B01. This affects the function formAdvFirewall of the file /goform/formAdvFirewall of the component POST Request Handler. Such manipulation of the argument curTime leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer. |
| A Permissive List of Allowed Input vulnerability in the CLI of Juniper Networks Support Insights (JSI) Virtual Lightweight Collector (vLWC) allows a local, high privileged attacker to escalate their privileges to root.
The CLI menu accepts input without carefully validating it, which allows for shell command injection. These shell commands are executed with root permissions and can be used to gain complete control of the system.
This issue affects all JSI vLWC versions before 3.0.94. |
| An Incorrect Initialization of Resource vulnerability in the packet forwarding engine (pfe) of Juniper Networks Junos OS on specific EX Series and QFX Series device allows an unauthenticated, network-based attacker to cause an integrity impact to downstream networks.
When the same family inet or inet6 filter is applied on an IRB interface and on a physical interface as egress filter on EX4100, EX4400, EX4650 and QFX5120 devices, only one of the two filters will be applied, which can lead to traffic being sent out one of these interfaces which should have been blocked.
This issue affects Junos OS on EX Series and QFX Series:
* 23.4 version 23.4R2-S6,
* 24.2 version 24.2R2-S3.
No other Junos OS versions are affected. |
| A Use of Default Password vulnerability in the Juniper Networks
Support Insights (JSI)
Virtual Lightweight Collector (vLWC) allows an unauthenticated, network-based attacker to take full control of the device.
vLWC software images ship with an initial password for a high privileged account. A change of this password is not enforced during the provisioning of the software, which can make full access to the system by unauthorized actors possible.This issue affects all versions of vLWC before 3.0.94. |
| A vulnerability was determined in D-Link DIR-605L 2.13B01. This issue affects the function formSetDDNS of the file /goform/formSetDDNS of the component POST Request Handler. Executing a manipulation of the argument curTime can lead to buffer overflow. The attack can be executed remotely. The exploit has been publicly disclosed and may be utilized. This vulnerability only affects products that are no longer supported by the maintainer. |
