| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
rpcrdma: arm rn_done before publishing the notification
rpcrdma_rn_register() inserts @rn into rd_xa with xa_alloc() before
storing the caller's callback in rn->rn_done. The xarray makes @rn
reachable to rpcrdma_remove_one(), which walks rd_xa and invokes
rn->rn_done(rn) for every registered notification. A device removal
that races a fresh registration can therefore observe @rn with
rn_done still NULL, because the notification objects are zero
allocated by their owners, and call through a NULL function pointer.
Store rn->rn_done before xa_alloc() publishes @rn. The xarray's
store-side and load-side ordering then guarantees that any CPU which
finds @rn in rd_xa also observes the armed callback.
rpcrdma_rn_unregister() treats a non-NULL rn_done as the sentinel
for a completed registration, so the early store must not survive a
failed registration. Clear rn_done again when xa_alloc() fails.
Were it left set, the failed-accept cleanup path would call
rpcrdma_rn_unregister() on an @rn that was never inserted, erasing
an unrelated rd_xa slot and underflowing rd_kref. |
| In the Linux kernel, the following vulnerability has been resolved:
KEYS: trusted: Fix TPM teardown ordering
trusted_tpm_exit() drops the TPM chip reference and frees the digest
array before unregistering the trusted key type. key_type_lookup()
holds key_types_sem for reading until the key operation finishes, while
unregister_key_type() takes it for writing. It therefore provides the
synchronization point that must precede backend teardown.
The current order permits this interleaving:
CPU 0 CPU 1
trusted_tpm_exit() key_type_lookup("trusted")
put_device(&chip->dev) trusted_tpm_seal()
kfree(digests) pcrlock()
unregister_key_type() tpm_pcr_extend(..., digests)
CPU 1 can consequently dereference the freed digest array. The chip can
also be released before callbacks stop using it.
KASAN reported:
BUG: KASAN: slab-use-after-free in tpm_pcr_extend+0x1f0/0x200
Read of size 2 at addr ffff88810872d000 by task poc/89
Call Trace:
tpm_pcr_extend+0x1f0/0x200
pcrlock+0x42/0x70 [trusted]
trusted_tpm_seal+0x1b6/0x570 [trusted]
trusted_instantiate+0x293/0x340 [trusted]
__key_instantiate_and_link+0xb2/0x2b0
__key_create_or_update+0x61e/0xb50
__do_sys_add_key+0x1b8/0x310
Allocated by task 88:
__kmalloc_noprof+0x1a7/0x490
do_one_initcall+0xa1/0x390
do_init_module+0x2df/0x840
Freed by task 90:
kfree+0x131/0x3c0
trusted_tpm_exit+0x59/0xa0 [trusted]
__do_sys_delete_module+0x346/0x510
Move unregister_key_type() before releasing either resource. This stops
new lookups and waits for in-flight key operations to finish before the
backend state is destroyed. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/migrate_device: clear stale mapping after freeing swapcache
__migrate_device_pages() reads the folio mapping before calling
folio_free_swap(). When folio_free_swap() succeeds, the folio is removed
from the swap cache, but the saved mapping still points to swap_space.
Passing the stale mapping to folio_migrate_mapping() makes it use the
mapped-folio path for a folio that is no longer in swapcache. It can then
operate on swap_space.i_pages with invalid reference accounting,
eventually triggering a folio reference count BUG.
After a successful split, nr still contains the number of pages in the
original large folio, although each resulting page is now a separate
order-0 folio. Reset nr to 1 so each split folio is processed separately,
including its own swapcache removal and mapping lookup.
Refresh the saved mapping after folio_free_swap() so the current folio
state is used during migration. |
| In the Linux kernel, the following vulnerability has been resolved:
zram: fix out-of-bounds access in read_block_state()
read_block_state() calculates nr_pages before taking dev_lock. If the
device is reset and reinitialized with a smaller disksize before lock
acquisition, nr_pages still describes the old table. The subsequent loop
can then call slot_lock() past the end of the newly allocated table.
Read disksize after acquiring dev_lock and checking that the device is
initialized. The read lock then keeps the table and its bound stable for
the duration of the scan. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: RCU-protect cl_cb_session to fix use-after-free on session teardown
After a DESTROY_SESSION the per-session teardown path can free a
session while rpciod still holds an inflight callback rpc_task that
dereferences clp->cl_cb_session. nfsd4_probe_callback_sync() flushes
cl_callback_wq, but once nfsd4_run_cb_work() has called
rpc_call_async() the rpc_task lives on rpciod; flushing the workqueue
does not wait for it. rpc_shutdown_client() does drain rpciod tasks,
but uses a 1-second wait_event_timeout — tasks stuck in rpc_delay()
(e.g. 2-second NFS4ERR_DELAY retries) can outlive the drain.
destroy path rpciod
------------ ------
unhash_session(ses)
nfsd4_probe_callback_sync(clp)
flush_workqueue(cl_callback_wq)
/* returns; rpc_task still live */
nfsd4_put_session_locked(ses)
free_session(ses) -> kfree(ses)
nfsd4_cb_sequence_done()
reads cb_clp->cl_cb_session
/* freed slab */
A second window exists in nfsd4_process_cb_update(). When
__nfsd4_find_backchannel() returns NULL because unhash_session() has
already removed the destroyed session from cl_sessions,
setup_callback_client() takes the v4.1 early return so
clp->cl_cb_session = ses never fires and the field retains a pointer
to the about-to-be-freed session.
Fix both by converting cl_cb_session to an RCU-protected pointer:
- Move the cl_cb_session = ses assignment in setup_callback_client()
to after rpc_create() succeeds, so it is only published when a
working backchannel exists. Clear cl_cb_session on the error
return in nfsd4_process_cb_update(). Both stores use
rcu_assign_pointer().
- Annotate cl_cb_session with __rcu. All rpciod-side readers use
rcu_read_lock()/rcu_dereference() and check for NULL, bailing to
the appropriate error or requeue path:
encode_cb_sequence4args(), decode_cb_sequence4resok(),
nfsd41_cb_get_slot(), nfsd41_cb_release_slot(),
nfsd4_cb_prepare(), and nfsd4_cb_sequence_done().
- Switch __free_session() from kfree() to kfree_rcu() so the
session slab is not reclaimed until after an RCU grace period,
guaranteeing that rpciod readers inside rcu_read_lock() never
dereference freed memory.
- Pass the session pointer to the nfsd_cb_seq_status and
nfsd_cb_free_slot tracepoints instead of having them re-read
cl_cb_session.
- nfsd4_cb_prepare() calls rpc_exit() when the session is NULL,
routing through the done/release path to requeue the callback. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix stale s2s_cp_stateids IDR entry for async COPY
For an async COPY, nfsd4_copy() called nfs4_init_copy_state() before
dup_copy_fields(), so the s2s_cp_stateids IDR was pointed at
&u->copy->cp_stateid -- memory in the per-rqstp COMPOUND buffer that is
reused by the next request. dup_copy_fields() copies only the value into
async_copy, so the IDR slot dangled at the transient buffer for the whole
background copy. Any IDR walker then dereferences reused request memory:
the laundromat reads cs_type from it and, if the bytes look like an
expired NFS4_COPYNOTIFY_STID, follows into
refcount_dec()/idr_remove()/kfree() on garbage; manage_cpntf_state() has
the same exposure via idr_find().
Duplicate the fields first, then register the stateid on the stable
async_copy. result->cb_stateid is unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Prevent client use-after-free during admin state revocation
A stateid holds only a bare pointer to its nfs4_client; a stateid
reference does not pin it. The client survives only because
__destroy_client() drains its stateids before free_client() runs.
nfsd4_revoke_states() drops nn->client_lock across revoke_one_stid(),
which dereferences the client to revoke a stateid and read
clp->cl_minorversion. A teardown racing the dropped lock can free
the client first.
Pinning cl_rpc_users under client_lock blocks the DESTROY_CLIENTID and
EXCHANGE_ID teardown, which refuses while cl_rpc_users is non-zero.
force_expire_client() ignores it: once its wait for cl_rpc_users to
reach zero has passed, a later pin goes unnoticed.
Under client_lock, skip a client whose cl_time is already zero --
force_expire_client() clears it there before waiting -- otherwise pin
cl_rpc_users before dropping the lock. The walk then either sees the
expiry and skips, or pins in time for that wait to cover the revoke. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Prevent client use-after-free during delegation revoke
A delegation stateid holds only a bare pointer to its owning
nfs4_client and does not keep it alive. The client survives its
stateids only because __destroy_client() drains cl_delegations and
cl_revoked before free_client() runs.
nfs4_laundromat() breaks that invariant: it unhashes an
expired delegation from cl_delegations, drops deleg_lock, then
revoke_delegation() relinks it onto cl_revoked under cl_lock. In that
window the delegation is on neither list, so client_has_state() can
report no remaining state.
Every teardown path first requires cl_rpc_users to be zero, but
the laundromat holds no such reference. A client whose recalled
delegation has just timed out can therefore reach free_client()
while revoke_delegation() is still about to dereference cl_lock,
a use-after-free.
Pin the client with cl_rpc_users across the revoke so teardown blocks
until it completes, then reap the delegation from cl_revoked. A client
already expiring reaps its own, so skip it and leave the delegation on
del_recall_lru. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: universal-pidff: stop the device when force-feedback init fails
universal_pidff_probe() starts the device with hid_hw_start() and then, if
force-feedback initialisation fails, returns the error through a label that
only does "return error". The device is left started.
The HID core does not unwind on the driver's behalf. __hid_device_probe()
releases the devres group, closes the report and clears hdev->driver:
if (ret) {
devres_release_group(&hdev->dev, hdev->devres_group_id);
hid_close_report(hdev);
hdev->driver = NULL;
}
The hidraw character device that hid_hw_start() registered through
hid_connect() is allocated with kzalloc() and added with cdev_device_add(),
so it is not devres-managed and survives that. With hdev->driver NULL,
hid_device_remove() skips hid_hw_stop() as well, because it only unwinds
while a driver is still attached. The registration therefore outlives the
device on both paths.
Opening the surviving /dev/hidrawX writes into freed memory. KASAN reports
a use-after-free write from hidraw_open() -> hid_hw_open() -> the
transport's open callback, which takes a spinlock inside the freed object.
A descriptor that carries a PID usage page and no input reports is enough:
hidraw claims the device so hid_hw_start() succeeds, while hid->inputs
stays empty so force-feedback init fails. The other failure returns in
hid_pidff_init_with_quirks() - no output reports, an allocation failure,
pidff_init_fields(), pidff_check_autocenter(), an unusable effect count,
input_ff_create() - all reach the same label.
Stop the device on that path. hid-dr.c and hid-emsff.c, which start the
device with the same HID_CONNECT_DEFAULT & ~HID_CONNECT_FF mask, already do
this. The two earlier gotos must keep returning without hid_hw_stop(),
since neither has a started device, so give the path that fails after the
start its own label.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| In the Linux kernel, the following vulnerability has been resolved:
HID: mcp2221: clear rxbuf after I2C/SMBus transfer completes
mcp_i2c_smbus_read() stores the caller-supplied buffer pointer in
mcp->rxbuf for the duration of a transfer but never clears it when the
transfer finishes or times out. Once the caller frees or reuses the
buffer, mcp->rxbuf becomes a dangling pointer. A delayed or spurious
MCP2221_I2C_GET_DATA report can then drive mcp2221_raw_event() to
memcpy device data into the freed memory, causing a write
use-after-free.
Route all return paths through a single exit point that clears
mcp->rxbuf and mcp->rxbuf_size, so that the existing !mcp->rxbuf guard
in the raw_event handler can reject any report arriving after the
transfer has ended. |
| In the Linux kernel, the following vulnerability has been resolved:
acpi/apei/ghes: Use raw_spinlock_t for CXL CPER work locks
The CXL CPER work registration and unregistration helpers acquire
cxl_cper_work_lock and cxl_cper_prot_err_work_lock with a spinlock
guard(), which leaves local interrupts enabled. The corresponding post
paths (cxl_cper_post_event(), cxl_cper_post_prot_err()) execute in hard
IRQ context (they are called from the GHES error notification path) and
acquire the same locks with an irqsave guard().
If a CPU is holding one of these locks via a spinlock guard() when a GHES
interrupt arrives on the same CPU, the IRQ handler spins on the held lock
waiting for it to release, while the lock holder is preempted by the IRQ.
The result is a deadlock.
Convert both locks from spinlock_t to raw_spinlock_t and use guard() at
all call sites. On PREEMPT_RT kernels spinlock_t is backed by rt_mutex and
sleeping from hard IRQ context is not permitted; raw_spinlock_t is safe in
both contexts.
Add WARN_ONCE to both register functions to surface double-registration
bugs at runtime.
Restructure both unregister functions to clear the global work pointer
under the lock before calling cancel_work_sync(), closing the window
where a CPER interrupt could schedule work on a pointer about to be
freed. Add kfifo_reset() after cancel_work_sync() so stale entries
are not replayed on next module load.
Both kfifos are single-consumer: only one work_struct is registered at
a time, enforced by the WARN_ONCE guard in the register functions.
kfifo_reset() is safe outside the lock because cancel_work_sync() has
already quiesced the consumer, and no new consumer can register until
the current module exit completes and a fresh module init runs.
Remove the redundant cancel_work_sync() call from cxl_ras_exit() and
cxl_pci_driver_exit(). The CPER unregister functions now quiesce
the work internally. |
| In the Linux kernel, the following vulnerability has been resolved:
ip: orphan prefetched skbs before multicast forwarding
IPv4 and IPv6 input preserve an skb->sk association installed by
bpf_sk_assign() so that local delivery can use the selected socket under
RCU. Both address families can also prefetch a socket in UDP early demux.
In both paths (BPF and UDP early demux) a reference is not guaranteed to
be held on the socket.
When a multicast packet is not locally deliverable, IPv6 hands the
original skb to ip6_mr_input(). IPv4's ip_mr_input() similarly keeps the
original skb when local delivery is not needed. Either path can put the
skb on an unresolved multicast route queue or forward it after the
receive-side RCU section ends.
After the prefetched socket is destroyed, a later skb free invokes
sock_pfree() and dereferences the stale skb->sk. Orphan the skb before
each non-local multicast forwarding path. Local delivery retains the
original skb; the existing skb_clone() calls provide multicast forwarding
with a socket-free clone. |
| In the Linux kernel, the following vulnerability has been resolved:
sunrpc: fix use-after-free in __rpc_clnt_handle_event and __rpc_clnt_remove_pipedir
Normal client creation goes through rpc_setup_pipedir(), which records
clnt->pipefs_sb, but the mount-event path in __rpc_clnt_handle_event()
calls rpc_setup_pipedir_sb() directly and never refreshes that field.
The umount path also removes the directory without clearing
clnt->pipefs_sb.
After a late pipefs mount or any remount, rpc_clnt_remove_pipedir()
compares the current superblock against a stale pipefs_sb pointer and
skips cleanup, leaving pipefs dentries whose inode private data still
points at a freed rpc_clnt, leading to a potential use-after-free during
subsequent rpc_info_open() or rpc_show_info() calls.
Fix this by properly updating clnt->pipefs_sb upon mount events and
clearing it during unmount or failure paths. |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Reorder rpcrdma_rn_unregister before rdma_destroy_id
svc_rdma_free() caches rdma->sc_cm_id->device before teardown,
then calls rdma_destroy_id(sc_cm_id) which frees the cm_id.
rpcrdma_rn_unregister() follows, but between those two calls
the transport's sc_rn entry is still installed in the device's
rd_xa. A concurrent ib_unregister_device walk can dispatch
svc_rdma_xprt_done() against the now-freed sc_cm_id.
Move rpcrdma_rn_unregister() before rdma_destroy_id() so the
transport's notification entry is removed from the xarray before
the cm_id it references is destroyed.
Also guard the sc_cm_id dereference with a NULL check: the
following patches introduce paths that reach svc_rdma_free()
with sc_cm_id == NULL (listener create failure, ADDR_CHANGE
replacement failure). |
| Type confusion in V8 in Google Chrome prior to 153.0.8010.52 allowed a remote attacker leveraging social engineering to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Missing authorization in Storage in Google Chrome prior to 153.0.8010.52 allowed a remote attacker who had compromised the renderer process to bypass site isolation via a crafted PDF file. (Chromium security severity: Medium) |
| A flaw was found in libkcapi. A local attacker can influence an application that uses the Asynchronous Input/Output (AIO) interface. By reusing an AIO-enabled handle after a prior completion error, the _kcapi_aio_read_all() function can enter a non-terminating wait loop. This can lead to a persistent denial of service, making the affected application or thread unresponsive. |
| A flaw was found in the authentication session management of Keycloak, an identity and access management solution. The issue occurs when an administrator enforces a stronger authentication flow, such as mandatory two-factor authentication (2FA) setup, through a client policy. A user can bypass this requirement by manually visiting a specific session restart web link during the login process. This action clears the internal markers that track the required security steps, allowing the user to log in with only a password and gain access without completing the mandated 2FA setup. |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in DiviNext Woo Essential allows SQL Injection.
This issue affects Woo Essential: from n/a through 4.3.0. |
| Kyoo is a self-hosted media server focused on movies, series, and anime. Prior to 5.1.0, a registered user with the core.play permission could supply a base64-encoded filesystem path to the transcoder. The path handling in transcoder/src/api/path.go cleaned the value and checked only that it began with Settings.SafePath before getHash processed it, while transcoder/src/api/streams.go served the accepted path without verifying a Kyoo catalog record. This missing catalog-level authorization allowed the user to retrieve hidden, temporary, operational, or other uncataloged files beneath the media directory when the path was known or guessed. This vulnerability is fixed in 5.1.0. |
