Filtered by vendor Redhat
Subscriptions
Total
20653 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-35835 | 1 Redhat | 1 Enterprise Linux | 2024-08-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: fix a double-free in arfs_create_groups When `in` allocated by kvzalloc fails, arfs_create_groups will free ft->g and return an error. However, arfs_create_table, the only caller of arfs_create_groups, will hold this error and call to mlx5e_destroy_flow_table, in which the ft->g will be freed again. | ||||
| CVE-2024-35845 | 1 Redhat | 5 Enterprise Linux, Rhel Aus, Rhel E4s and 2 more | 2024-08-02 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: dbg-tlv: ensure NUL termination The iwl_fw_ini_debug_info_tlv is used as a string, so we must ensure the string is terminated correctly before using it. | ||||
| CVE-2024-35870 | 1 Redhat | 2 Enterprise Linux, Rhel Eus | 2024-08-02 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix UAF in smb2_reconnect_server() The UAF bug is due to smb2_reconnect_server() accessing a session that is already being teared down by another thread that is executing __cifs_put_smb_ses(). This can happen when (a) the client has connection to the server but no session or (b) another thread ends up setting @ses->ses_status again to something different than SES_EXITING. To fix this, we need to make sure to unconditionally set @ses->ses_status to SES_EXITING and prevent any other threads from setting a new status while we're still tearing it down. The following can be reproduced by adding some delay to right after the ipc is freed in __cifs_put_smb_ses() - which will give smb2_reconnect_server() worker a chance to run and then accessing @ses->ipc: kinit ... mount.cifs //srv/share /mnt/1 -o sec=krb5,nohandlecache,echo_interval=10 [disconnect srv] ls /mnt/1 &>/dev/null sleep 30 kdestroy [reconnect srv] sleep 10 umount /mnt/1 ... CIFS: VFS: Verify user has a krb5 ticket and keyutils is installed CIFS: VFS: \\srv Send error in SessSetup = -126 CIFS: VFS: Verify user has a krb5 ticket and keyutils is installed CIFS: VFS: \\srv Send error in SessSetup = -126 general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b6b: 0000 [#1] PREEMPT SMP NOPTI CPU: 3 PID: 50 Comm: kworker/3:1 Not tainted 6.9.0-rc2 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-1.fc39 04/01/2014 Workqueue: cifsiod smb2_reconnect_server [cifs] RIP: 0010:__list_del_entry_valid_or_report+0x33/0xf0 Code: 4f 08 48 85 d2 74 42 48 85 c9 74 59 48 b8 00 01 00 00 00 00 ad de 48 39 c2 74 61 48 b8 22 01 00 00 00 00 74 69 <48> 8b 01 48 39 f8 75 7b 48 8b 72 08 48 39 c6 0f 85 88 00 00 00 b8 RSP: 0018:ffffc900001bfd70 EFLAGS: 00010a83 RAX: dead000000000122 RBX: ffff88810da53838 RCX: 6b6b6b6b6b6b6b6b RDX: 6b6b6b6b6b6b6b6b RSI: ffffffffc02f6878 RDI: ffff88810da53800 RBP: ffff88810da53800 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: ffff88810c064000 R13: 0000000000000001 R14: ffff88810c064000 R15: ffff8881039cc000 FS: 0000000000000000(0000) GS:ffff888157c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe3728b1000 CR3: 000000010caa4000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> ? die_addr+0x36/0x90 ? exc_general_protection+0x1c1/0x3f0 ? asm_exc_general_protection+0x26/0x30 ? __list_del_entry_valid_or_report+0x33/0xf0 __cifs_put_smb_ses+0x1ae/0x500 [cifs] smb2_reconnect_server+0x4ed/0x710 [cifs] process_one_work+0x205/0x6b0 worker_thread+0x191/0x360 ? __pfx_worker_thread+0x10/0x10 kthread+0xe2/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> | ||||
| CVE-2024-35896 | 1 Redhat | 2 Enterprise Linux, Rhel Eus | 2024-08-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: validate user input for expected length I got multiple syzbot reports showing old bugs exposed by BPF after commit 20f2505fb436 ("bpf: Try to avoid kzalloc in cgroup/{s,g}etsockopt") setsockopt() @optlen argument should be taken into account before copying data. BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset include/linux/sockptr.h:49 [inline] BUG: KASAN: slab-out-of-bounds in copy_from_sockptr include/linux/sockptr.h:55 [inline] BUG: KASAN: slab-out-of-bounds in do_replace net/ipv4/netfilter/ip_tables.c:1111 [inline] BUG: KASAN: slab-out-of-bounds in do_ipt_set_ctl+0x902/0x3dd0 net/ipv4/netfilter/ip_tables.c:1627 Read of size 96 at addr ffff88802cd73da0 by task syz-executor.4/7238 CPU: 1 PID: 7238 Comm: syz-executor.4 Not tainted 6.9.0-rc2-next-20240403-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 kasan_check_range+0x282/0x290 mm/kasan/generic.c:189 __asan_memcpy+0x29/0x70 mm/kasan/shadow.c:105 copy_from_sockptr_offset include/linux/sockptr.h:49 [inline] copy_from_sockptr include/linux/sockptr.h:55 [inline] do_replace net/ipv4/netfilter/ip_tables.c:1111 [inline] do_ipt_set_ctl+0x902/0x3dd0 net/ipv4/netfilter/ip_tables.c:1627 nf_setsockopt+0x295/0x2c0 net/netfilter/nf_sockopt.c:101 do_sock_setsockopt+0x3af/0x720 net/socket.c:2311 __sys_setsockopt+0x1ae/0x250 net/socket.c:2334 __do_sys_setsockopt net/socket.c:2343 [inline] __se_sys_setsockopt net/socket.c:2340 [inline] __x64_sys_setsockopt+0xb5/0xd0 net/socket.c:2340 do_syscall_64+0xfb/0x240 entry_SYSCALL_64_after_hwframe+0x72/0x7a RIP: 0033:0x7fd22067dde9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fd21f9ff0c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 00007fd2207abf80 RCX: 00007fd22067dde9 RDX: 0000000000000040 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 00007fd2206ca47a R08: 0000000000000001 R09: 0000000000000000 R10: 0000000020000880 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000000b R14: 00007fd2207abf80 R15: 00007ffd2d0170d8 </TASK> Allocated by task 7238: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:370 [inline] __kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:387 kasan_kmalloc include/linux/kasan.h:211 [inline] __do_kmalloc_node mm/slub.c:4069 [inline] __kmalloc_noprof+0x200/0x410 mm/slub.c:4082 kmalloc_noprof include/linux/slab.h:664 [inline] __cgroup_bpf_run_filter_setsockopt+0xd47/0x1050 kernel/bpf/cgroup.c:1869 do_sock_setsockopt+0x6b4/0x720 net/socket.c:2293 __sys_setsockopt+0x1ae/0x250 net/socket.c:2334 __do_sys_setsockopt net/socket.c:2343 [inline] __se_sys_setsockopt net/socket.c:2340 [inline] __x64_sys_setsockopt+0xb5/0xd0 net/socket.c:2340 do_syscall_64+0xfb/0x240 entry_SYSCALL_64_after_hwframe+0x72/0x7a The buggy address belongs to the object at ffff88802cd73da0 which belongs to the cache kmalloc-8 of size 8 The buggy address is located 0 bytes inside of allocated 1-byte region [ffff88802cd73da0, ffff88802cd73da1) The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88802cd73020 pfn:0x2cd73 flags: 0xfff80000000000(node=0|zone=1|lastcpupid=0xfff) page_type: 0xffffefff(slab) raw: 00fff80000000000 ffff888015041280 dead000000000100 dead000000000122 raw: ffff88802cd73020 000000008080007f 00000001ffffefff 00 ---truncated--- | ||||
| CVE-2024-35888 | 1 Redhat | 1 Enterprise Linux | 2024-08-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: erspan: make sure erspan_base_hdr is present in skb->head syzbot reported a problem in ip6erspan_rcv() [1] Issue is that ip6erspan_rcv() (and erspan_rcv()) no longer make sure erspan_base_hdr is present in skb linear part (skb->head) before getting @ver field from it. Add the missing pskb_may_pull() calls. v2: Reload iph pointer in erspan_rcv() after pskb_may_pull() because skb->head might have changed. [1] BUG: KMSAN: uninit-value in pskb_may_pull_reason include/linux/skbuff.h:2742 [inline] BUG: KMSAN: uninit-value in pskb_may_pull include/linux/skbuff.h:2756 [inline] BUG: KMSAN: uninit-value in ip6erspan_rcv net/ipv6/ip6_gre.c:541 [inline] BUG: KMSAN: uninit-value in gre_rcv+0x11f8/0x1930 net/ipv6/ip6_gre.c:610 pskb_may_pull_reason include/linux/skbuff.h:2742 [inline] pskb_may_pull include/linux/skbuff.h:2756 [inline] ip6erspan_rcv net/ipv6/ip6_gre.c:541 [inline] gre_rcv+0x11f8/0x1930 net/ipv6/ip6_gre.c:610 ip6_protocol_deliver_rcu+0x1d4c/0x2ca0 net/ipv6/ip6_input.c:438 ip6_input_finish net/ipv6/ip6_input.c:483 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] ip6_input+0x15d/0x430 net/ipv6/ip6_input.c:492 ip6_mc_input+0xa7e/0xc80 net/ipv6/ip6_input.c:586 dst_input include/net/dst.h:460 [inline] ip6_rcv_finish+0x955/0x970 net/ipv6/ip6_input.c:79 NF_HOOK include/linux/netfilter.h:314 [inline] ipv6_rcv+0xde/0x390 net/ipv6/ip6_input.c:310 __netif_receive_skb_one_core net/core/dev.c:5538 [inline] __netif_receive_skb+0x1da/0xa00 net/core/dev.c:5652 netif_receive_skb_internal net/core/dev.c:5738 [inline] netif_receive_skb+0x58/0x660 net/core/dev.c:5798 tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1549 tun_get_user+0x5566/0x69e0 drivers/net/tun.c:2002 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048 call_write_iter include/linux/fs.h:2108 [inline] new_sync_write fs/read_write.c:497 [inline] vfs_write+0xb63/0x1520 fs/read_write.c:590 ksys_write+0x20f/0x4c0 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0x93/0xe0 fs/read_write.c:652 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Uninit was created at: slab_post_alloc_hook mm/slub.c:3804 [inline] slab_alloc_node mm/slub.c:3845 [inline] kmem_cache_alloc_node+0x613/0xc50 mm/slub.c:3888 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:577 __alloc_skb+0x35b/0x7a0 net/core/skbuff.c:668 alloc_skb include/linux/skbuff.h:1318 [inline] alloc_skb_with_frags+0xc8/0xbf0 net/core/skbuff.c:6504 sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2795 tun_alloc_skb drivers/net/tun.c:1525 [inline] tun_get_user+0x209a/0x69e0 drivers/net/tun.c:1846 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048 call_write_iter include/linux/fs.h:2108 [inline] new_sync_write fs/read_write.c:497 [inline] vfs_write+0xb63/0x1520 fs/read_write.c:590 ksys_write+0x20f/0x4c0 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0x93/0xe0 fs/read_write.c:652 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 CPU: 1 PID: 5045 Comm: syz-executor114 Not tainted 6.9.0-rc1-syzkaller-00021-g962490525cff #0 | ||||
| CVE-2024-35823 | 1 Redhat | 5 Enterprise Linux, Rhel Aus, Rhel E4s and 2 more | 2024-08-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vt: fix unicode buffer corruption when deleting characters This is the same issue that was fixed for the VGA text buffer in commit 39cdb68c64d8 ("vt: fix memory overlapping when deleting chars in the buffer"). The cure is also the same i.e. replace memcpy() with memmove() due to the overlaping buffers. | ||||
| CVE-2024-35839 | 1 Redhat | 2 Enterprise Linux, Rhel Eus | 2024-08-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: bridge: replace physindev with physinif in nf_bridge_info An skb can be added to a neigh->arp_queue while waiting for an arp reply. Where original skb's skb->dev can be different to neigh's neigh->dev. For instance in case of bridging dnated skb from one veth to another, the skb would be added to a neigh->arp_queue of the bridge. As skb->dev can be reset back to nf_bridge->physindev and used, and as there is no explicit mechanism that prevents this physindev from been freed under us (for instance neigh_flush_dev doesn't cleanup skbs from different device's neigh queue) we can crash on e.g. this stack: arp_process neigh_update skb = __skb_dequeue(&neigh->arp_queue) neigh_resolve_output(..., skb) ... br_nf_dev_xmit br_nf_pre_routing_finish_bridge_slow skb->dev = nf_bridge->physindev br_handle_frame_finish Let's use plain ifindex instead of net_device link. To peek into the original net_device we will use dev_get_by_index_rcu(). Thus either we get device and are safe to use it or we don't get it and drop skb. | ||||
| CVE-2024-35853 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2024-08-02 | 6.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_acl_tcam: Fix memory leak during rehash The rehash delayed work migrates filters from one region to another. This is done by iterating over all chunks (all the filters with the same priority) in the region and in each chunk iterating over all the filters. If the migration fails, the code tries to migrate the filters back to the old region. However, the rollback itself can also fail in which case another migration will be erroneously performed. Besides the fact that this ping pong is not a very good idea, it also creates a problem. Each virtual chunk references two chunks: The currently used one ('vchunk->chunk') and a backup ('vchunk->chunk2'). During migration the first holds the chunk we want to migrate filters to and the second holds the chunk we are migrating filters from. The code currently assumes - but does not verify - that the backup chunk does not exist (NULL) if the currently used chunk does not reference the target region. This assumption breaks when we are trying to rollback a rollback, resulting in the backup chunk being overwritten and leaked [1]. Fix by not rolling back a failed rollback and add a warning to avoid future cases. [1] WARNING: CPU: 5 PID: 1063 at lib/parman.c:291 parman_destroy+0x17/0x20 Modules linked in: CPU: 5 PID: 1063 Comm: kworker/5:11 Tainted: G W 6.9.0-rc2-custom-00784-gc6a05c468a0b #14 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:parman_destroy+0x17/0x20 [...] Call Trace: <TASK> mlxsw_sp_acl_atcam_region_fini+0x19/0x60 mlxsw_sp_acl_tcam_region_destroy+0x49/0xf0 mlxsw_sp_acl_tcam_vregion_rehash_work+0x1f1/0x470 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> | ||||
| CVE-2024-35855 | 1 Redhat | 1 Enterprise Linux | 2024-08-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_acl_tcam: Fix possible use-after-free during activity update The rule activity update delayed work periodically traverses the list of configured rules and queries their activity from the device. As part of this task it accesses the entry pointed by 'ventry->entry', but this entry can be changed concurrently by the rehash delayed work, leading to a use-after-free [1]. Fix by closing the race and perform the activity query under the 'vregion->lock' mutex. [1] BUG: KASAN: slab-use-after-free in mlxsw_sp_acl_tcam_flower_rule_activity_get+0x121/0x140 Read of size 8 at addr ffff8881054ed808 by task kworker/0:18/181 CPU: 0 PID: 181 Comm: kworker/0:18 Not tainted 6.9.0-rc2-custom-00781-gd5ab772d32f7 #2 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_rule_activity_update_work Call Trace: <TASK> dump_stack_lvl+0xc6/0x120 print_report+0xce/0x670 kasan_report+0xd7/0x110 mlxsw_sp_acl_tcam_flower_rule_activity_get+0x121/0x140 mlxsw_sp_acl_rule_activity_update_work+0x219/0x400 process_one_work+0x8eb/0x19b0 worker_thread+0x6c9/0xf70 kthread+0x2c9/0x3b0 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 1039: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 __kmalloc+0x19c/0x360 mlxsw_sp_acl_tcam_entry_create+0x7b/0x1f0 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x30d/0xb50 mlxsw_sp_acl_tcam_vregion_rehash_work+0x157/0x1300 process_one_work+0x8eb/0x19b0 worker_thread+0x6c9/0xf70 kthread+0x2c9/0x3b0 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 Freed by task 1039: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 poison_slab_object+0x102/0x170 __kasan_slab_free+0x14/0x30 kfree+0xc1/0x290 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x3d7/0xb50 mlxsw_sp_acl_tcam_vregion_rehash_work+0x157/0x1300 process_one_work+0x8eb/0x19b0 worker_thread+0x6c9/0xf70 kthread+0x2c9/0x3b0 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 | ||||
| CVE-2024-35852 | 1 Redhat | 5 Enterprise Linux, Rhel Aus, Rhel E4s and 2 more | 2024-08-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_acl_tcam: Fix memory leak when canceling rehash work The rehash delayed work is rescheduled with a delay if the number of credits at end of the work is not negative as supposedly it means that the migration ended. Otherwise, it is rescheduled immediately. After "mlxsw: spectrum_acl_tcam: Fix possible use-after-free during rehash" the above is no longer accurate as a non-negative number of credits is no longer indicative of the migration being done. It can also happen if the work encountered an error in which case the migration will resume the next time the work is scheduled. The significance of the above is that it is possible for the work to be pending and associated with hints that were allocated when the migration started. This leads to the hints being leaked [1] when the work is canceled while pending as part of ACL region dismantle. Fix by freeing the hints if hints are associated with a work that was canceled while pending. Blame the original commit since the reliance on not having a pending work associated with hints is fragile. [1] unreferenced object 0xffff88810e7c3000 (size 256): comm "kworker/0:16", pid 176, jiffies 4295460353 hex dump (first 32 bytes): 00 30 95 11 81 88 ff ff 61 00 00 00 00 00 00 80 .0......a....... 00 00 61 00 40 00 00 00 00 00 00 00 04 00 00 00 ..a.@........... backtrace (crc 2544ddb9): [<00000000cf8cfab3>] kmalloc_trace+0x23f/0x2a0 [<000000004d9a1ad9>] objagg_hints_get+0x42/0x390 [<000000000b143cf3>] mlxsw_sp_acl_erp_rehash_hints_get+0xca/0x400 [<0000000059bdb60a>] mlxsw_sp_acl_tcam_vregion_rehash_work+0x868/0x1160 [<00000000e81fd734>] process_one_work+0x59c/0xf20 [<00000000ceee9e81>] worker_thread+0x799/0x12c0 [<00000000bda6fe39>] kthread+0x246/0x300 [<0000000070056d23>] ret_from_fork+0x34/0x70 [<00000000dea2b93e>] ret_from_fork_asm+0x1a/0x30 | ||||
| CVE-2024-35885 | 1 Redhat | 2 Enterprise Linux, Rhel Eus | 2024-08-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mlxbf_gige: stop interface during shutdown The mlxbf_gige driver intermittantly encounters a NULL pointer exception while the system is shutting down via "reboot" command. The mlxbf_driver will experience an exception right after executing its shutdown() method. One example of this exception is: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000070 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=000000011d373000 [0000000000000070] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 96000004 [#1] SMP CPU: 0 PID: 13 Comm: ksoftirqd/0 Tainted: G S OE 5.15.0-bf.6.gef6992a #1 Hardware name: https://www.mellanox.com BlueField SoC/BlueField SoC, BIOS 4.0.2.12669 Apr 21 2023 pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mlxbf_gige_handle_tx_complete+0xc8/0x170 [mlxbf_gige] lr : mlxbf_gige_poll+0x54/0x160 [mlxbf_gige] sp : ffff8000080d3c10 x29: ffff8000080d3c10 x28: ffffcce72cbb7000 x27: ffff8000080d3d58 x26: ffff0000814e7340 x25: ffff331cd1a05000 x24: ffffcce72c4ea008 x23: ffff0000814e4b40 x22: ffff0000814e4d10 x21: ffff0000814e4128 x20: 0000000000000000 x19: ffff0000814e4a80 x18: ffffffffffffffff x17: 000000000000001c x16: ffffcce72b4553f4 x15: ffff80008805b8a7 x14: 0000000000000000 x13: 0000000000000030 x12: 0101010101010101 x11: 7f7f7f7f7f7f7f7f x10: c2ac898b17576267 x9 : ffffcce720fa5404 x8 : ffff000080812138 x7 : 0000000000002e9a x6 : 0000000000000080 x5 : ffff00008de3b000 x4 : 0000000000000000 x3 : 0000000000000001 x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: mlxbf_gige_handle_tx_complete+0xc8/0x170 [mlxbf_gige] mlxbf_gige_poll+0x54/0x160 [mlxbf_gige] __napi_poll+0x40/0x1c8 net_rx_action+0x314/0x3a0 __do_softirq+0x128/0x334 run_ksoftirqd+0x54/0x6c smpboot_thread_fn+0x14c/0x190 kthread+0x10c/0x110 ret_from_fork+0x10/0x20 Code: 8b070000 f9000ea0 f95056c0 f86178a1 (b9407002) ---[ end trace 7cc3941aa0d8e6a4 ]--- Kernel panic - not syncing: Oops: Fatal exception in interrupt Kernel Offset: 0x4ce722520000 from 0xffff800008000000 PHYS_OFFSET: 0x80000000 CPU features: 0x000005c1,a3330e5a Memory Limit: none ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]--- During system shutdown, the mlxbf_gige driver's shutdown() is always executed. However, the driver's stop() method will only execute if networking interface configuration logic within the Linux distribution has been setup to do so. If shutdown() executes but stop() does not execute, NAPI remains enabled and this can lead to an exception if NAPI is scheduled while the hardware interface has only been partially deinitialized. The networking interface managed by the mlxbf_gige driver must be properly stopped during system shutdown so that IFF_UP is cleared, the hardware interface is put into a clean state, and NAPI is fully deinitialized. | ||||
| CVE-2024-35854 | 1 Redhat | 1 Enterprise Linux | 2024-08-02 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_acl_tcam: Fix possible use-after-free during rehash The rehash delayed work migrates filters from one region to another according to the number of available credits. The migrated from region is destroyed at the end of the work if the number of credits is non-negative as the assumption is that this is indicative of migration being complete. This assumption is incorrect as a non-negative number of credits can also be the result of a failed migration. The destruction of a region that still has filters referencing it can result in a use-after-free [1]. Fix by not destroying the region if migration failed. [1] BUG: KASAN: slab-use-after-free in mlxsw_sp_acl_ctcam_region_entry_remove+0x21d/0x230 Read of size 8 at addr ffff8881735319e8 by task kworker/0:31/3858 CPU: 0 PID: 3858 Comm: kworker/0:31 Tainted: G W 6.9.0-rc2-custom-00782-gf2275c2157d8 #5 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work Call Trace: <TASK> dump_stack_lvl+0xc6/0x120 print_report+0xce/0x670 kasan_report+0xd7/0x110 mlxsw_sp_acl_ctcam_region_entry_remove+0x21d/0x230 mlxsw_sp_acl_ctcam_entry_del+0x2e/0x70 mlxsw_sp_acl_atcam_entry_del+0x81/0x210 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x3cd/0xb50 mlxsw_sp_acl_tcam_vregion_rehash_work+0x157/0x1300 process_one_work+0x8eb/0x19b0 worker_thread+0x6c9/0xf70 kthread+0x2c9/0x3b0 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 174: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 __kmalloc+0x19c/0x360 mlxsw_sp_acl_tcam_region_create+0xdf/0x9c0 mlxsw_sp_acl_tcam_vregion_rehash_work+0x954/0x1300 process_one_work+0x8eb/0x19b0 worker_thread+0x6c9/0xf70 kthread+0x2c9/0x3b0 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 Freed by task 7: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 poison_slab_object+0x102/0x170 __kasan_slab_free+0x14/0x30 kfree+0xc1/0x290 mlxsw_sp_acl_tcam_region_destroy+0x272/0x310 mlxsw_sp_acl_tcam_vregion_rehash_work+0x731/0x1300 process_one_work+0x8eb/0x19b0 worker_thread+0x6c9/0xf70 kthread+0x2c9/0x3b0 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 | ||||
| CVE-2024-35800 | 1 Redhat | 1 Enterprise Linux | 2024-08-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: efi: fix panic in kdump kernel Check if get_next_variable() is actually valid pointer before calling it. In kdump kernel this method is set to NULL that causes panic during the kexec-ed kernel boot. Tested with QEMU and OVMF firmware. | ||||
| CVE-2024-35801 | 1 Redhat | 1 Enterprise Linux | 2024-08-02 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: x86/fpu: Keep xfd_state in sync with MSR_IA32_XFD Commit 672365477ae8 ("x86/fpu: Update XFD state where required") and commit 8bf26758ca96 ("x86/fpu: Add XFD state to fpstate") introduced a per CPU variable xfd_state to keep the MSR_IA32_XFD value cached, in order to avoid unnecessary writes to the MSR. On CPU hotplug MSR_IA32_XFD is reset to the init_fpstate.xfd, which wipes out any stale state. But the per CPU cached xfd value is not reset, which brings them out of sync. As a consequence a subsequent xfd_update_state() might fail to update the MSR which in turn can result in XRSTOR raising a #NM in kernel space, which crashes the kernel. To fix this, introduce xfd_set_state() to write xfd_state together with MSR_IA32_XFD, and use it in all places that set MSR_IA32_XFD. | ||||
| CVE-2024-35824 | 1 Redhat | 1 Enterprise Linux | 2024-08-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: misc: lis3lv02d_i2c: Fix regulators getting en-/dis-abled twice on suspend/resume When not configured for wakeup lis3lv02d_i2c_suspend() will call lis3lv02d_poweroff() even if the device has already been turned off by the runtime-suspend handler and if configured for wakeup and the device is runtime-suspended at this point then it is not turned back on to serve as a wakeup source. Before commit b1b9f7a49440 ("misc: lis3lv02d_i2c: Add missing setting of the reg_ctrl callback"), lis3lv02d_poweroff() failed to disable the regulators which as a side effect made calling poweroff() twice ok. Now that poweroff() correctly disables the regulators, doing this twice triggers a WARN() in the regulator core: unbalanced disables for regulator-dummy WARNING: CPU: 1 PID: 92 at drivers/regulator/core.c:2999 _regulator_disable ... Fix lis3lv02d_i2c_suspend() to not call poweroff() a second time if already runtime-suspended and add a poweron() call when necessary to make wakeup work. lis3lv02d_i2c_resume() has similar issues, with an added weirness that it always powers on the device if it is runtime suspended, after which the first runtime-resume will call poweron() again, causing the enabled count for the regulator to increase by 1 every suspend/resume. These unbalanced regulator_enable() calls cause the regulator to never be turned off and trigger the following WARN() on driver unbind: WARNING: CPU: 1 PID: 1724 at drivers/regulator/core.c:2396 _regulator_put Fix this by making lis3lv02d_i2c_resume() mirror the new suspend(). | ||||
| CVE-2024-35814 | 1 Redhat | 1 Enterprise Linux | 2024-08-02 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: swiotlb: Fix double-allocation of slots due to broken alignment handling Commit bbb73a103fbb ("swiotlb: fix a braino in the alignment check fix"), which was a fix for commit 0eee5ae10256 ("swiotlb: fix slot alignment checks"), causes a functional regression with vsock in a virtual machine using bouncing via a restricted DMA SWIOTLB pool. When virtio allocates the virtqueues for the vsock device using dma_alloc_coherent(), the SWIOTLB search can return page-unaligned allocations if 'area->index' was left unaligned by a previous allocation from the buffer: # Final address in brackets is the SWIOTLB address returned to the caller | virtio-pci 0000:00:07.0: orig_addr 0x0 alloc_size 0x2000, iotlb_align_mask 0x800 stride 0x2: got slot 1645-1649/7168 (0x98326800) | virtio-pci 0000:00:07.0: orig_addr 0x0 alloc_size 0x2000, iotlb_align_mask 0x800 stride 0x2: got slot 1649-1653/7168 (0x98328800) | virtio-pci 0000:00:07.0: orig_addr 0x0 alloc_size 0x2000, iotlb_align_mask 0x800 stride 0x2: got slot 1653-1657/7168 (0x9832a800) This ends badly (typically buffer corruption and/or a hang) because swiotlb_alloc() is expecting a page-aligned allocation and so blindly returns a pointer to the 'struct page' corresponding to the allocation, therefore double-allocating the first half (2KiB slot) of the 4KiB page. Fix the problem by treating the allocation alignment separately to any additional alignment requirements from the device, using the maximum of the two as the stride to search the buffer slots and taking care to ensure a minimum of page-alignment for buffers larger than a page. This also resolves swiotlb allocation failures occuring due to the inclusion of ~PAGE_MASK in 'iotlb_align_mask' for large allocations and resulting in alignment requirements exceeding swiotlb_max_mapping_size(). | ||||
| CVE-2024-35857 | 1 Redhat | 2 Enterprise Linux, Rhel Eus | 2024-08-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: icmp: prevent possible NULL dereferences from icmp_build_probe() First problem is a double call to __in_dev_get_rcu(), because the second one could return NULL. if (__in_dev_get_rcu(dev) && __in_dev_get_rcu(dev)->ifa_list) Second problem is a read from dev->ip6_ptr with no NULL check: if (!list_empty(&rcu_dereference(dev->ip6_ptr)->addr_list)) Use the correct RCU API to fix these. v2: add missing include <net/addrconf.h> | ||||
| CVE-2024-35807 | 1 Redhat | 1 Enterprise Linux | 2024-08-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix corruption during on-line resize We observed a corruption during on-line resize of a file system that is larger than 16 TiB with 4k block size. With having more then 2^32 blocks resize_inode is turned off by default by mke2fs. The issue can be reproduced on a smaller file system for convenience by explicitly turning off resize_inode. An on-line resize across an 8 GiB boundary (the size of a meta block group in this setup) then leads to a corruption: dev=/dev/<some_dev> # should be >= 16 GiB mkdir -p /corruption /sbin/mke2fs -t ext4 -b 4096 -O ^resize_inode $dev $((2 * 2**21 - 2**15)) mount -t ext4 $dev /corruption dd if=/dev/zero bs=4096 of=/corruption/test count=$((2*2**21 - 4*2**15)) sha1sum /corruption/test # 79d2658b39dcfd77274e435b0934028adafaab11 /corruption/test /sbin/resize2fs $dev $((2*2**21)) # drop page cache to force reload the block from disk echo 1 > /proc/sys/vm/drop_caches sha1sum /corruption/test # 3c2abc63cbf1a94c9e6977e0fbd72cd832c4d5c3 /corruption/test 2^21 = 2^15*2^6 equals 8 GiB whereof 2^15 is the number of blocks per block group and 2^6 are the number of block groups that make a meta block group. The last checksum might be different depending on how the file is laid out across the physical blocks. The actual corruption occurs at physical block 63*2^15 = 2064384 which would be the location of the backup of the meta block group's block descriptor. During the on-line resize the file system will be converted to meta_bg starting at s_first_meta_bg which is 2 in the example - meaning all block groups after 16 GiB. However, in ext4_flex_group_add we might add block groups that are not part of the first meta block group yet. In the reproducer we achieved this by substracting the size of a whole block group from the point where the meta block group would start. This must be considered when updating the backup block group descriptors to follow the non-meta_bg layout. The fix is to add a test whether the group to add is already part of the meta block group or not. | ||||
| CVE-2024-35797 | 1 Redhat | 1 Enterprise Linux | 2024-08-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm: cachestat: fix two shmem bugs When cachestat on shmem races with swapping and invalidation, there are two possible bugs: 1) A swapin error can have resulted in a poisoned swap entry in the shmem inode's xarray. Calling get_shadow_from_swap_cache() on it will result in an out-of-bounds access to swapper_spaces[]. Validate the entry with non_swap_entry() before going further. 2) When we find a valid swap entry in the shmem's inode, the shadow entry in the swapcache might not exist yet: swap IO is still in progress and we're before __remove_mapping; swapin, invalidation, or swapoff have removed the shadow from swapcache after we saw the shmem swap entry. This will send a NULL to workingset_test_recent(). The latter purely operates on pointer bits, so it won't crash - node 0, memcg ID 0, eviction timestamp 0, etc. are all valid inputs - but it's a bogus test. In theory that could result in a false "recently evicted" count. Such a false positive wouldn't be the end of the world. But for code clarity and (future) robustness, be explicit about this case. Bail on get_shadow_from_swap_cache() returning NULL. | ||||
| CVE-2024-35789 | 1 Redhat | 5 Enterprise Linux, Rhel Aus, Rhel E4s and 2 more | 2024-08-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: check/clear fast rx for non-4addr sta VLAN changes When moving a station out of a VLAN and deleting the VLAN afterwards, the fast_rx entry still holds a pointer to the VLAN's netdev, which can cause use-after-free bugs. Fix this by immediately calling ieee80211_check_fast_rx after the VLAN change. | ||||