| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Race condition in Canonical apport up to and including 2.32.0 allows a local attacker to leak sensitive information via PID-reuse by leveraging namespaces.
When handling a crash, the function `_check_global_pid_and_forward`, which detects if the crashing process resided in a container, was being called before `consistency_checks`, which attempts to detect if the crashing process had been replaced. Because of this, if a process crashed and was quickly replaced with a containerized one, apport could be made to forward the core dump to the container, potentially leaking sensitive information. `consistency_checks` is now being called before `_check_global_pid_and_forward`. Additionally, given that the PID-reuse race condition cannot be reliably detected from userspace alone, crashes are only forwarded to containers if the kernel provided a pidfd, or if the crashing process was unprivileged (i.e., if dump mode == 1). |
| Floating point exception in fig2dev in version 3.2.9a allows an attacker to availability via local input manipulation via get_slope function. |
| A race condition vulnerability exists in the aVideoEncoder.json.php unzip functionality of WWBN AVideo 14.4 and dev master commit 8a8954ff. A series of specially crafted HTTP request can lead to arbitrary code execution. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mvpp2: Prevent parser TCAM memory corruption
Protect the parser TCAM/SRAM memory, and the cached (shadow) SRAM
information, from concurrent modifications.
Both the TCAM and SRAM tables are indirectly accessed by configuring
an index register that selects the row to read or write to. This means
that operations must be atomic in order to, e.g., avoid spreading
writes across multiple rows. Since the shadow SRAM array is used to
find free rows in the hardware table, it must also be protected in
order to avoid TOCTOU errors where multiple cores allocate the same
row.
This issue was detected in a situation where `mvpp2_set_rx_mode()` ran
concurrently on two CPUs. In this particular case the
MVPP2_PE_MAC_UC_PROMISCUOUS entry was corrupted, causing the
classifier unit to drop all incoming unicast - indicated by the
`rx_classifier_drops` counter. |
| In the Linux kernel, the following vulnerability has been resolved:
media: streamzap: fix race between device disconnection and urb callback
Syzkaller has reported a general protection fault at function
ir_raw_event_store_with_filter(). This crash is caused by a NULL pointer
dereference of dev->raw pointer, even though it is checked for NULL in
the same function, which means there is a race condition. It occurs due
to the incorrect order of actions in the streamzap_disconnect() function:
rc_unregister_device() is called before usb_kill_urb(). The dev->raw
pointer is freed and set to NULL in rc_unregister_device(), and only
after that usb_kill_urb() waits for in-progress requests to finish.
If rc_unregister_device() is called while streamzap_callback() handler is
not finished, this can lead to accessing freed resources. Thus
rc_unregister_device() should be called after usb_kill_urb().
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: aggregator: protect driver attr handlers against module unload
Both new_device_store and delete_device_store touch module global
resources (e.g. gpio_aggregator_lock). To prevent race conditions with
module unload, a reference needs to be held.
Add try_module_get() in these handlers.
For new_device_store, this eliminates what appears to be the most dangerous
scenario: if an id is allocated from gpio_aggregator_idr but
platform_device_register has not yet been called or completed, a concurrent
module unload could fail to unregister/delete the device, leaving behind a
dangling platform device/GPIO forwarder. This can result in various issues.
The following simple reproducer demonstrates these problems:
#!/bin/bash
while :; do
# note: whether 'gpiochip0 0' exists or not does not matter.
echo 'gpiochip0 0' > /sys/bus/platform/drivers/gpio-aggregator/new_device
done &
while :; do
modprobe gpio-aggregator
modprobe -r gpio-aggregator
done &
wait
Starting with the following warning, several kinds of warnings will appear
and the system may become unstable:
------------[ cut here ]------------
list_del corruption, ffff888103e2e980->next is LIST_POISON1 (dead000000000100)
WARNING: CPU: 1 PID: 1327 at lib/list_debug.c:56 __list_del_entry_valid_or_report+0xa3/0x120
[...]
RIP: 0010:__list_del_entry_valid_or_report+0xa3/0x120
[...]
Call Trace:
<TASK>
? __list_del_entry_valid_or_report+0xa3/0x120
? __warn.cold+0x93/0xf2
? __list_del_entry_valid_or_report+0xa3/0x120
? report_bug+0xe6/0x170
? __irq_work_queue_local+0x39/0xe0
? handle_bug+0x58/0x90
? exc_invalid_op+0x13/0x60
? asm_exc_invalid_op+0x16/0x20
? __list_del_entry_valid_or_report+0xa3/0x120
gpiod_remove_lookup_table+0x22/0x60
new_device_store+0x315/0x350 [gpio_aggregator]
kernfs_fop_write_iter+0x137/0x1f0
vfs_write+0x262/0x430
ksys_write+0x60/0xd0
do_syscall_64+0x6c/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
[...]
</TASK>
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: nl80211: reject cooked mode if it is set along with other flags
It is possible to set both MONITOR_FLAG_COOK_FRAMES and MONITOR_FLAG_ACTIVE
flags simultaneously on the same monitor interface from the userspace. This
causes a sub-interface to be created with no IEEE80211_SDATA_IN_DRIVER bit
set because the monitor interface is in the cooked state and it takes
precedence over all other states. When the interface is then being deleted
the kernel calls WARN_ONCE() from check_sdata_in_driver() because of missing
that bit.
Fix this by rejecting MONITOR_FLAG_COOK_FRAMES if it is set along with
other flags.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
ftrace: Avoid potential division by zero in function_stat_show()
Check whether denominator expression x * (x - 1) * 1000 mod {2^32, 2^64}
produce zero and skip stddev computation in that case.
For now don't care about rec->counter * rec->counter overflow because
rec->time * rec->time overflow will likely happen earlier. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Check denominator crb_pipes before used
[WHAT & HOW]
A denominator cannot be 0, and is checked before used.
This fixes 2 DIVIDE_BY_ZERO issues reported by Coverity. |
| TOCTOU Race Condition vulnerability in apport allows a local attacker to escalate privileges and execute arbitrary code. An attacker may exit the crashed process and exploit PID recycling to spawn a root process with the same PID as the crashed process, which can then be used to escalate privileges. Fixed in 2.20.1-0ubuntu2.24, 2.20.9 versions prior to 2.20.9-0ubuntu7.16 and 2.20.11 versions prior to 2.20.11-0ubuntu27.6. Was ZDI-CAN-11234. |
| Race condition in Apport before 2.17.2-0ubuntu1.1 as packaged in Ubuntu 15.04, before 2.14.70ubuntu8.5 as packaged in Ubuntu 14.10, before 2.14.1-0ubuntu3.11 as packaged in Ubuntu 14.04 LTS, and before 2.0.1-0ubuntu17.9 as packaged in Ubuntu 12.04 LTS allow local users to write to arbitrary files and gain root privileges. |
| ImageMagick is a software suite to create, edit, compose, or convert bitmap images. ImageMagick versions prior to 7.1.2-8 are vulnerable to denial-of-service due to unsigned integer underflow and division-by-zero in the CLAHEImage function. When tile width or height is zero, unsigned underflow occurs in pointer arithmetic, leading to out-of-bounds memory access, and division-by-zero causes immediate crashes. This issue has been patched in version 7.1.2-8. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 6.9.13-28 and 7.1.2-2, passing a geometry string containing only a colon (":") to montage -geometry leads GetGeometry() to set width/height to 0. Later, ThumbnailImage() divides by these zero dimensions, triggering a crash (SIGFPE/abort), resulting in a denial of service. This issue has been patched in versions 6.9.13-28 and 7.1.2-2. |
| In WinRAR versions prior to and including 5.61, There is path traversal vulnerability when crafting the filename field of the ACE format (in UNACEV2.dll). When the filename field is manipulated with specific patterns, the destination (extraction) folder is ignored, thus treating the filename as an absolute path. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/core: Order the PMU list to fix warning about unordered pmu_ctx_list
Syskaller triggers a warning due to prev_epc->pmu != next_epc->pmu in
perf_event_swap_task_ctx_data(). vmcore shows that two lists have the same
perf_event_pmu_context, but not in the same order.
The problem is that the order of pmu_ctx_list for the parent is impacted by
the time when an event/PMU is added. While the order for a child is
impacted by the event order in the pinned_groups and flexible_groups. So
the order of pmu_ctx_list in the parent and child may be different.
To fix this problem, insert the perf_event_pmu_context to its proper place
after iteration of the pmu_ctx_list.
The follow testcase can trigger above warning:
# perf record -e cycles --call-graph lbr -- taskset -c 3 ./a.out &
# perf stat -e cpu-clock,cs -p xxx // xxx is the pid of a.out
test.c
void main() {
int count = 0;
pid_t pid;
printf("%d running\n", getpid());
sleep(30);
printf("running\n");
pid = fork();
if (pid == -1) {
printf("fork error\n");
return;
}
if (pid == 0) {
while (1) {
count++;
}
} else {
while (1) {
count++;
}
}
}
The testcase first opens an LBR event, so it will allocate task_ctx_data,
and then open tracepoint and software events, so the parent context will
have 3 different perf_event_pmu_contexts. On inheritance, child ctx will
insert the perf_event_pmu_context in another order and the warning will
trigger.
[ mingo: Tidied up the changelog. ] |
| A vulnerability was detected in Tomofun Furbo 360 up to FB0035_FW_036. Impacted is an unknown function of the component Audio Handler. Performing manipulation results in race condition. The attack is possible to be carried out remotely. The vendor was contacted early about this disclosure but did not respond in any way. |
| Windows User Profile Service Elevation of Privilege Vulnerability |
| Windows Kernel Elevation of Privilege Vulnerability |
| Windows Themes Remote Code Execution Vulnerability |
| A race condition could lead to a cross-origin container obtaining permissions of the top-level origin. This vulnerability affects Firefox < 128, Firefox ESR < 115.13, Thunderbird < 115.13, and Thunderbird < 128. |
