| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/dbgfs: fix 'struct pid' leaks in 'dbgfs_target_ids_write()'
DAMON debugfs interface increases the reference counts of 'struct pid's
for targets from the 'target_ids' file write callback
('dbgfs_target_ids_write()'), but decreases the counts only in DAMON
monitoring termination callback ('dbgfs_before_terminate()').
Therefore, when 'target_ids' file is repeatedly written without DAMON
monitoring start/termination, the reference count is not decreased and
therefore memory for the 'struct pid' cannot be freed. This commit
fixes this issue by decreasing the reference counts when 'target_ids' is
written. |
| In the Linux kernel, the following vulnerability has been resolved:
binder: fix async_free_space accounting for empty parcels
In 4.13, commit 74310e06be4d ("android: binder: Move buffer out of area shared with user space")
fixed a kernel structure visibility issue. As part of that patch,
sizeof(void *) was used as the buffer size for 0-length data payloads so
the driver could detect abusive clients sending 0-length asynchronous
transactions to a server by enforcing limits on async_free_size.
Unfortunately, on the "free" side, the accounting of async_free_space
did not add the sizeof(void *) back. The result was that up to 8-bytes of
async_free_space were leaked on every async transaction of 8-bytes or
less. These small transactions are uncommon, so this accounting issue
has gone undetected for several years.
The fix is to use "buffer_size" (the allocated buffer size) instead of
"size" (the logical buffer size) when updating the async_free_space
during the free operation. These are the same except for this
corner case of asynchronous transactions with payloads < 8 bytes. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/mount_setattr: always cleanup mount_kattr
Make sure that finish_mount_kattr() is called after mount_kattr was
succesfully built in both the success and failure case to prevent
leaking any references we took when we built it. We returned early if
path lookup failed thereby risking to leak an additional reference we
took when building mount_kattr when an idmapped mount was requested. |
| In the Linux kernel, the following vulnerability has been resolved:
locking/qrwlock: Fix ordering in queued_write_lock_slowpath()
While this code is executed with the wait_lock held, a reader can
acquire the lock without holding wait_lock. The writer side loops
checking the value with the atomic_cond_read_acquire(), but only truly
acquires the lock when the compare-and-exchange is completed
successfully which isn’t ordered. This exposes the window between the
acquire and the cmpxchg to an A-B-A problem which allows reads
following the lock acquisition to observe values speculatively before
the write lock is truly acquired.
We've seen a problem in epoll where the reader does a xchg while
holding the read lock, but the writer can see a value change out from
under it.
Writer | Reader
--------------------------------------------------------------------------------
ep_scan_ready_list() |
|- write_lock_irq() |
|- queued_write_lock_slowpath() |
|- atomic_cond_read_acquire() |
| read_lock_irqsave(&ep->lock, flags);
--> (observes value before unlock) | chain_epi_lockless()
| | epi->next = xchg(&ep->ovflist, epi);
| | read_unlock_irqrestore(&ep->lock, flags);
| |
| atomic_cmpxchg_relaxed() |
|-- READ_ONCE(ep->ovflist); |
A core can order the read of the ovflist ahead of the
atomic_cmpxchg_relaxed(). Switching the cmpxchg to use acquire
semantics addresses this issue at which point the atomic_cond_read can
be switched to use relaxed semantics.
[peterz: use try_cmpxchg()] |
| In the Linux kernel, the following vulnerability has been resolved:
net: Make tcp_allowed_congestion_control readonly in non-init netns
Currently, tcp_allowed_congestion_control is global and writable;
writing to it in any net namespace will leak into all other net
namespaces.
tcp_available_congestion_control and tcp_allowed_congestion_control are
the only sysctls in ipv4_net_table (the per-netns sysctl table) with a
NULL data pointer; their handlers (proc_tcp_available_congestion_control
and proc_allowed_congestion_control) have no other way of referencing a
struct net. Thus, they operate globally.
Because ipv4_net_table does not use designated initializers, there is no
easy way to fix up this one "bad" table entry. However, the data pointer
updating logic shouldn't be applied to NULL pointers anyway, so we
instead force these entries to be read-only.
These sysctls used to exist in ipv4_table (init-net only), but they were
moved to the per-net ipv4_net_table, presumably without realizing that
tcp_allowed_congestion_control was writable and thus introduced a leak.
Because the intent of that commit was only to know (i.e. read) "which
congestion algorithms are available or allowed", this read-only solution
should be sufficient.
The logic added in recent commit
31c4d2f160eb: ("net: Ensure net namespace isolation of sysctls")
does not and cannot check for NULL data pointers, because
other table entries (e.g. /proc/sys/net/netfilter/nf_log/) have
.data=NULL but use other methods (.extra2) to access the struct net. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: usbhid: fix info leak in hid_submit_ctrl
In hid_submit_ctrl(), the way of calculating the report length doesn't
take into account that report->size can be zero. When running the
syzkaller reproducer, a report of size 0 causes hid_submit_ctrl) to
calculate transfer_buffer_length as 16384. When this urb is passed to
the usb core layer, KMSAN reports an info leak of 16384 bytes.
To fix this, first modify hid_report_len() to account for the zero
report size case by using DIV_ROUND_UP for the division. Then, call it
from hid_submit_ctrl(). |
| In the Linux kernel, the following vulnerability has been resolved:
media: [next] staging: media: atomisp: fix memory leak of object flash
In the case where the call to lm3554_platform_data_func returns an
error there is a memory leak on the error return path of object
flash. Fix this by adding an error return path that will free
flash and rename labels fail2 to fail3 and fail1 to fail2. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: cadence: fix reference leak when pm_runtime_get_sync fails
The PM reference count is not expected to be incremented on
return in functions cdns_i2c_master_xfer and cdns_reg_slave.
However, pm_runtime_get_sync will increment pm usage counter
even failed. Forgetting to putting operation will result in a
reference leak here.
Replace it with pm_runtime_resume_and_get to keep usage
counter balanced. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: img-scb: fix reference leak when pm_runtime_get_sync fails
The PM reference count is not expected to be incremented on
return in functions img_i2c_xfer and img_i2c_init.
However, pm_runtime_get_sync will increment the PM reference
count even failed. Forgetting to putting operation will result
in a reference leak here.
Replace it with pm_runtime_resume_and_get to keep usage
counter balanced. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: imx-lpi2c: fix reference leak when pm_runtime_get_sync fails
The PM reference count is not expected to be incremented on
return in lpi2c_imx_master_enable.
However, pm_runtime_get_sync will increment the PM reference
count even failed. Forgetting to putting operation will result
in a reference leak here.
Replace it with pm_runtime_resume_and_get to keep usage
counter balanced. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: imx: fix reference leak when pm_runtime_get_sync fails
In i2c_imx_xfer() and i2c_imx_remove(), the pm reference count
is not expected to be incremented on return.
However, pm_runtime_get_sync will increment pm reference count
even failed. Forgetting to putting operation will result in a
reference leak here.
Replace it with pm_runtime_resume_and_get to keep usage
counter balanced. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: sprd: fix reference leak when pm_runtime_get_sync fails
The PM reference count is not expected to be incremented on
return in sprd_i2c_master_xfer() and sprd_i2c_remove().
However, pm_runtime_get_sync will increment the PM reference
count even failed. Forgetting to putting operation will result
in a reference leak here.
Replace it with pm_runtime_resume_and_get to keep usage
counter balanced. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: stm32f7: fix reference leak when pm_runtime_get_sync fails
The PM reference count is not expected to be incremented on
return in these stm32f7_i2c_xx serious functions.
However, pm_runtime_get_sync will increment the PM reference
count even failed. Forgetting to putting operation will result
in a reference leak here.
Replace it with pm_runtime_resume_and_get to keep usage
counter balanced. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: xiic: fix reference leak when pm_runtime_get_sync fails
The PM reference count is not expected to be incremented on
return in xiic_xfer and xiic_i2c_remove.
However, pm_runtime_get_sync will increment the PM reference
count even failed. Forgetting to putting operation will result
in a reference leak here.
Replace it with pm_runtime_resume_and_get to keep usage
counter balanced. |
| XWiki Platform is a generic wiki platform. Prior to 15.10.14, 16.4.6, and 16.10.0-rc-1, protected pages are listed when requesting the REST endpoints /rest/wikis/[wikiName]/pages even if the user doesn't have view rights on them. It's particularly true if the entire wiki is protected with "Prevent unregistered user to view pages": the endpoint would still list the pages of the wiki, though only for the main wiki. The problem has been patched in XWiki 15.10.14, 16.4.6, 16.10.0RC1. In those versions the endpoint can still be requested but the result is filtered out based on pages rights. |
| Elasticsearch X-Pack Security versions 5.0.0 to 5.4.3, when enabled, can result in the Elasticsearch _nodes API leaking sensitive configuration information, such as the paths and passphrases of SSL keys that were configured as part of an authentication realm. This could allow an authenticated Elasticsearch user to improperly view these details. |
| ghinstallation provides transport, which implements http.RoundTripper to provide authentication as an installation for GitHub Apps. In ghinstallation version 1, when the request to refresh an installation token failed, the HTTP request and response would be returned for debugging. The request contained the bearer JWT for the App, and was returned back to clients. This token is short lived (10 minute maximum). This issue has been patched and is available in version 2.0.0.
|
| In Zammad 6.4.x before 6.4.2, there is information exposure. Only agents should be able to see and work on shared article drafts. However, a logged in customer was able to see details about shared drafts for their customer tickets in the browser console, which may contain confidential information, and also to manipulate them via API. |
| Incorrect handling of '\0' bytes in file uploads in ModSecurity before 2.9.7 may allow for Web Application Firewall bypasses and buffer over-reads on the Web Application Firewall when executing rules that read the FILES_TMP_CONTENT collection. |
| A memory leak flaw was found in nft_set_catchall_flush in net/netfilter/nf_tables_api.c in the Linux Kernel. This issue may allow a local attacker to cause double-deactivations of catchall elements, which can result in a memory leak. |
