| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix a memory leak in an error path of qla2x00_process_els()
Commit 8c0eb596baa5 ("[SCSI] qla2xxx: Fix a memory leak in an error path of
qla2x00_process_els()"), intended to change:
bsg_job->request->msgcode == FC_BSG_HST_ELS_NOLOGIN
bsg_job->request->msgcode != FC_BSG_RPT_ELS
but changed it to:
bsg_job->request->msgcode == FC_BSG_RPT_ELS
instead.
Change the == to a != to avoid leaking the fcport structure or freeing
unallocated memory. |
| In the Linux kernel, the following vulnerability has been resolved:
mm, slub: fix potential use-after-free in slab_debugfs_fops
When sysfs_slab_add failed, we shouldn't call debugfs_slab_add() for s
because s will be freed soon. And slab_debugfs_fops will use s later
leading to a use-after-free. |
| In the Linux kernel, the following vulnerability has been resolved:
can: j1939: j1939_netdev_start(): fix UAF for rx_kref of j1939_priv
It will trigger UAF for rx_kref of j1939_priv as following.
cpu0 cpu1
j1939_sk_bind(socket0, ndev0, ...)
j1939_netdev_start
j1939_sk_bind(socket1, ndev0, ...)
j1939_netdev_start
j1939_priv_set
j1939_priv_get_by_ndev_locked
j1939_jsk_add
.....
j1939_netdev_stop
kref_put_lock(&priv->rx_kref, ...)
kref_get(&priv->rx_kref, ...)
REFCOUNT_WARN("addition on 0;...")
====================================================
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 1 PID: 20874 at lib/refcount.c:25 refcount_warn_saturate+0x169/0x1e0
RIP: 0010:refcount_warn_saturate+0x169/0x1e0
Call Trace:
j1939_netdev_start+0x68b/0x920
j1939_sk_bind+0x426/0xeb0
? security_socket_bind+0x83/0xb0
The rx_kref's kref_get() and kref_put() should use j1939_netdev_lock to
protect. |
| In the Linux kernel, the following vulnerability has been resolved:
can: peak_pci: peak_pci_remove(): fix UAF
When remove the module peek_pci, referencing 'chan' again after
releasing 'dev' will cause UAF.
Fix this by releasing 'dev' later.
The following log reveals it:
[ 35.961814 ] BUG: KASAN: use-after-free in peak_pci_remove+0x16f/0x270 [peak_pci]
[ 35.963414 ] Read of size 8 at addr ffff888136998ee8 by task modprobe/5537
[ 35.965513 ] Call Trace:
[ 35.965718 ] dump_stack_lvl+0xa8/0xd1
[ 35.966028 ] print_address_description+0x87/0x3b0
[ 35.966420 ] kasan_report+0x172/0x1c0
[ 35.966725 ] ? peak_pci_remove+0x16f/0x270 [peak_pci]
[ 35.967137 ] ? trace_irq_enable_rcuidle+0x10/0x170
[ 35.967529 ] ? peak_pci_remove+0x16f/0x270 [peak_pci]
[ 35.967945 ] __asan_report_load8_noabort+0x14/0x20
[ 35.968346 ] peak_pci_remove+0x16f/0x270 [peak_pci]
[ 35.968752 ] pci_device_remove+0xa9/0x250 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: iscsi: Fix iscsi_task use after free
Commit d39df158518c ("scsi: iscsi: Have abort handler get ref to conn")
added iscsi_get_conn()/iscsi_put_conn() calls during abort handling but
then also changed the handling of the case where we detect an already
completed task where we now end up doing a goto to the common put/cleanup
code. This results in a iscsi_task use after free, because the common
cleanup code will do a put on the iscsi_task.
This reverts the goto and moves the iscsi_get_conn() to after we've checked
if the iscsi_task is valid. |
| In the Linux kernel, the following vulnerability has been resolved:
net: sched: flower: protect fl_walk() with rcu
Patch that refactored fl_walk() to use idr_for_each_entry_continue_ul()
also removed rcu protection of individual filters which causes following
use-after-free when filter is deleted concurrently. Fix fl_walk() to obtain
rcu read lock while iterating and taking the filter reference and temporary
release the lock while calling arg->fn() callback that can sleep.
KASAN trace:
[ 352.773640] ==================================================================
[ 352.775041] BUG: KASAN: use-after-free in fl_walk+0x159/0x240 [cls_flower]
[ 352.776304] Read of size 4 at addr ffff8881c8251480 by task tc/2987
[ 352.777862] CPU: 3 PID: 2987 Comm: tc Not tainted 5.15.0-rc2+ #2
[ 352.778980] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 352.781022] Call Trace:
[ 352.781573] dump_stack_lvl+0x46/0x5a
[ 352.782332] print_address_description.constprop.0+0x1f/0x140
[ 352.783400] ? fl_walk+0x159/0x240 [cls_flower]
[ 352.784292] ? fl_walk+0x159/0x240 [cls_flower]
[ 352.785138] kasan_report.cold+0x83/0xdf
[ 352.785851] ? fl_walk+0x159/0x240 [cls_flower]
[ 352.786587] kasan_check_range+0x145/0x1a0
[ 352.787337] fl_walk+0x159/0x240 [cls_flower]
[ 352.788163] ? fl_put+0x10/0x10 [cls_flower]
[ 352.789007] ? __mutex_unlock_slowpath.constprop.0+0x220/0x220
[ 352.790102] tcf_chain_dump+0x231/0x450
[ 352.790878] ? tcf_chain_tp_delete_empty+0x170/0x170
[ 352.791833] ? __might_sleep+0x2e/0xc0
[ 352.792594] ? tfilter_notify+0x170/0x170
[ 352.793400] ? __mutex_unlock_slowpath.constprop.0+0x220/0x220
[ 352.794477] tc_dump_tfilter+0x385/0x4b0
[ 352.795262] ? tc_new_tfilter+0x1180/0x1180
[ 352.796103] ? __mod_node_page_state+0x1f/0xc0
[ 352.796974] ? __build_skb_around+0x10e/0x130
[ 352.797826] netlink_dump+0x2c0/0x560
[ 352.798563] ? netlink_getsockopt+0x430/0x430
[ 352.799433] ? __mutex_unlock_slowpath.constprop.0+0x220/0x220
[ 352.800542] __netlink_dump_start+0x356/0x440
[ 352.801397] rtnetlink_rcv_msg+0x3ff/0x550
[ 352.802190] ? tc_new_tfilter+0x1180/0x1180
[ 352.802872] ? rtnl_calcit.isra.0+0x1f0/0x1f0
[ 352.803668] ? tc_new_tfilter+0x1180/0x1180
[ 352.804344] ? _copy_from_iter_nocache+0x800/0x800
[ 352.805202] ? kasan_set_track+0x1c/0x30
[ 352.805900] netlink_rcv_skb+0xc6/0x1f0
[ 352.806587] ? rht_deferred_worker+0x6b0/0x6b0
[ 352.807455] ? rtnl_calcit.isra.0+0x1f0/0x1f0
[ 352.808324] ? netlink_ack+0x4d0/0x4d0
[ 352.809086] ? netlink_deliver_tap+0x62/0x3d0
[ 352.809951] netlink_unicast+0x353/0x480
[ 352.810744] ? netlink_attachskb+0x430/0x430
[ 352.811586] ? __alloc_skb+0xd7/0x200
[ 352.812349] netlink_sendmsg+0x396/0x680
[ 352.813132] ? netlink_unicast+0x480/0x480
[ 352.813952] ? __import_iovec+0x192/0x210
[ 352.814759] ? netlink_unicast+0x480/0x480
[ 352.815580] sock_sendmsg+0x6c/0x80
[ 352.816299] ____sys_sendmsg+0x3a5/0x3c0
[ 352.817096] ? kernel_sendmsg+0x30/0x30
[ 352.817873] ? __ia32_sys_recvmmsg+0x150/0x150
[ 352.818753] ___sys_sendmsg+0xd8/0x140
[ 352.819518] ? sendmsg_copy_msghdr+0x110/0x110
[ 352.820402] ? ___sys_recvmsg+0xf4/0x1a0
[ 352.821110] ? __copy_msghdr_from_user+0x260/0x260
[ 352.821934] ? _raw_spin_lock+0x81/0xd0
[ 352.822680] ? __handle_mm_fault+0xef3/0x1b20
[ 352.823549] ? rb_insert_color+0x2a/0x270
[ 352.824373] ? copy_page_range+0x16b0/0x16b0
[ 352.825209] ? perf_event_update_userpage+0x2d0/0x2d0
[ 352.826190] ? __fget_light+0xd9/0xf0
[ 352.826941] __sys_sendmsg+0xb3/0x130
[ 352.827613] ? __sys_sendmsg_sock+0x20/0x20
[ 352.828377] ? do_user_addr_fault+0x2c5/0x8a0
[ 352.829184] ? fpregs_assert_state_consistent+0x52/0x60
[ 352.830001] ? exit_to_user_mode_prepare+0x32/0x160
[ 352.830845] do_syscall_64+0x35/0x80
[ 352.831445] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 352.832331] RIP: 0033:0x7f7bee973c17
[
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: unlink table before deleting it
syzbot reports following UAF:
BUG: KASAN: use-after-free in memcmp+0x18f/0x1c0 lib/string.c:955
nla_strcmp+0xf2/0x130 lib/nlattr.c:836
nft_table_lookup.part.0+0x1a2/0x460 net/netfilter/nf_tables_api.c:570
nft_table_lookup net/netfilter/nf_tables_api.c:4064 [inline]
nf_tables_getset+0x1b3/0x860 net/netfilter/nf_tables_api.c:4064
nfnetlink_rcv_msg+0x659/0x13f0 net/netfilter/nfnetlink.c:285
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504
Problem is that all get operations are lockless, so the commit_mutex
held by nft_rcv_nl_event() isn't enough to stop a parallel GET request
from doing read-accesses to the table object even after synchronize_rcu().
To avoid this, unlink the table first and store the table objects in
on-stack scratch space. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-rdma: destroy cm id before destroy qp to avoid use after free
We should always destroy cm_id before destroy qp to avoid to get cma
event after qp was destroyed, which may lead to use after free.
In RDMA connection establishment error flow, don't destroy qp in cm
event handler.Just report cm_error to upper level, qp will be destroy
in nvme_rdma_alloc_queue() after destroy cm id. |
| In the Linux kernel, the following vulnerability has been resolved:
blktrace: Fix uaf in blk_trace access after removing by sysfs
There is an use-after-free problem triggered by following process:
P1(sda) P2(sdb)
echo 0 > /sys/block/sdb/trace/enable
blk_trace_remove_queue
synchronize_rcu
blk_trace_free
relay_close
rcu_read_lock
__blk_add_trace
trace_note_tsk
(Iterate running_trace_list)
relay_close_buf
relay_destroy_buf
kfree(buf)
trace_note(sdb's bt)
relay_reserve
buf->offset <- nullptr deference (use-after-free) !!!
rcu_read_unlock
[ 502.714379] BUG: kernel NULL pointer dereference, address:
0000000000000010
[ 502.715260] #PF: supervisor read access in kernel mode
[ 502.715903] #PF: error_code(0x0000) - not-present page
[ 502.716546] PGD 103984067 P4D 103984067 PUD 17592b067 PMD 0
[ 502.717252] Oops: 0000 [#1] SMP
[ 502.720308] RIP: 0010:trace_note.isra.0+0x86/0x360
[ 502.732872] Call Trace:
[ 502.733193] __blk_add_trace.cold+0x137/0x1a3
[ 502.733734] blk_add_trace_rq+0x7b/0xd0
[ 502.734207] blk_add_trace_rq_issue+0x54/0xa0
[ 502.734755] blk_mq_start_request+0xde/0x1b0
[ 502.735287] scsi_queue_rq+0x528/0x1140
...
[ 502.742704] sg_new_write.isra.0+0x16e/0x3e0
[ 502.747501] sg_ioctl+0x466/0x1100
Reproduce method:
ioctl(/dev/sda, BLKTRACESETUP, blk_user_trace_setup[buf_size=127])
ioctl(/dev/sda, BLKTRACESTART)
ioctl(/dev/sdb, BLKTRACESETUP, blk_user_trace_setup[buf_size=127])
ioctl(/dev/sdb, BLKTRACESTART)
echo 0 > /sys/block/sdb/trace/enable &
// Add delay(mdelay/msleep) before kernel enters blk_trace_free()
ioctl$SG_IO(/dev/sda, SG_IO, ...)
// Enters trace_note_tsk() after blk_trace_free() returned
// Use mdelay in rcu region rather than msleep(which may schedule out)
Remove blk_trace from running_list before calling blk_trace_free() by
sysfs if blk_trace is at Blktrace_running state. |
| In the Linux kernel, the following vulnerability has been resolved:
mcb: fix error handling in mcb_alloc_bus()
There are two bugs:
1) If ida_simple_get() fails then this code calls put_device(carrier)
but we haven't yet called get_device(carrier) and probably that
leads to a use after free.
2) After device_initialize() then we need to use put_device() to
release the bus. This will free the internal resources tied to the
device and call mcb_free_bus() which will free the rest. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: greybus: uart: fix tty use after free
User space can hold a tty open indefinitely and tty drivers must not
release the underlying structures until the last user is gone.
Switch to using the tty-port reference counter to manage the life time
of the greybus tty state to avoid use after free after a disconnect. |
| In the Linux kernel, the following vulnerability has been resolved:
atm: iphase: fix possible use-after-free in ia_module_exit()
This module's remove path calls del_timer(). However, that function
does not wait until the timer handler finishes. This means that the
timer handler may still be running after the driver's remove function
has finished, which would result in a use-after-free.
Fix by calling del_timer_sync(), which makes sure the timer handler
has finished, and unable to re-schedule itself. |
| In the Linux kernel, the following vulnerability has been resolved:
mISDN: fix possible use-after-free in HFC_cleanup()
This module's remove path calls del_timer(). However, that function
does not wait until the timer handler finishes. This means that the
timer handler may still be running after the driver's remove function
has finished, which would result in a use-after-free.
Fix by calling del_timer_sync(), which makes sure the timer handler
has finished, and unable to re-schedule itself. |
| In the Linux kernel, the following vulnerability has been resolved:
atm: nicstar: Fix possible use-after-free in nicstar_cleanup()
This module's remove path calls del_timer(). However, that function
does not wait until the timer handler finishes. This means that the
timer handler may still be running after the driver's remove function
has finished, which would result in a use-after-free.
Fix by calling del_timer_sync(), which makes sure the timer handler
has finished, and unable to re-schedule itself. |
| In the Linux kernel, the following vulnerability has been resolved:
fbmem: Do not delete the mode that is still in use
The execution of fb_delete_videomode() is not based on the result of the
previous fbcon_mode_deleted(). As a result, the mode is directly deleted,
regardless of whether it is still in use, which may cause UAF.
==================================================================
BUG: KASAN: use-after-free in fb_mode_is_equal+0x36e/0x5e0 \
drivers/video/fbdev/core/modedb.c:924
Read of size 4 at addr ffff88807e0ddb1c by task syz-executor.0/18962
CPU: 2 PID: 18962 Comm: syz-executor.0 Not tainted 5.10.45-rc1+ #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ...
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x137/0x1be lib/dump_stack.c:118
print_address_description+0x6c/0x640 mm/kasan/report.c:385
__kasan_report mm/kasan/report.c:545 [inline]
kasan_report+0x13d/0x1e0 mm/kasan/report.c:562
fb_mode_is_equal+0x36e/0x5e0 drivers/video/fbdev/core/modedb.c:924
fbcon_mode_deleted+0x16a/0x220 drivers/video/fbdev/core/fbcon.c:2746
fb_set_var+0x1e1/0xdb0 drivers/video/fbdev/core/fbmem.c:975
do_fb_ioctl+0x4d9/0x6e0 drivers/video/fbdev/core/fbmem.c:1108
vfs_ioctl fs/ioctl.c:48 [inline]
__do_sys_ioctl fs/ioctl.c:753 [inline]
__se_sys_ioctl+0xfb/0x170 fs/ioctl.c:739
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Freed by task 18960:
kasan_save_stack mm/kasan/common.c:48 [inline]
kasan_set_track+0x3d/0x70 mm/kasan/common.c:56
kasan_set_free_info+0x17/0x30 mm/kasan/generic.c:355
__kasan_slab_free+0x108/0x140 mm/kasan/common.c:422
slab_free_hook mm/slub.c:1541 [inline]
slab_free_freelist_hook+0xd6/0x1a0 mm/slub.c:1574
slab_free mm/slub.c:3139 [inline]
kfree+0xca/0x3d0 mm/slub.c:4121
fb_delete_videomode+0x56a/0x820 drivers/video/fbdev/core/modedb.c:1104
fb_set_var+0x1f3/0xdb0 drivers/video/fbdev/core/fbmem.c:978
do_fb_ioctl+0x4d9/0x6e0 drivers/video/fbdev/core/fbmem.c:1108
vfs_ioctl fs/ioctl.c:48 [inline]
__do_sys_ioctl fs/ioctl.c:753 [inline]
__se_sys_ioctl+0xfb/0x170 fs/ioctl.c:739
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9 |
| In the Linux kernel, the following vulnerability has been resolved:
misc/libmasm/module: Fix two use after free in ibmasm_init_one
In ibmasm_init_one, it calls ibmasm_init_remote_input_dev().
Inside ibmasm_init_remote_input_dev, mouse_dev and keybd_dev are
allocated by input_allocate_device(), and assigned to
sp->remote.mouse_dev and sp->remote.keybd_dev respectively.
In the err_free_devices error branch of ibmasm_init_one,
mouse_dev and keybd_dev are freed by input_free_device(), and return
error. Then the execution runs into error_send_message error branch
of ibmasm_init_one, where ibmasm_free_remote_input_dev(sp) is called
to unregister the freed sp->remote.mouse_dev and sp->remote.keybd_dev.
My patch add a "error_init_remote" label to handle the error of
ibmasm_init_remote_input_dev(), to avoid the uaf bugs. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: iscsi: Fix conn use after free during resets
If we haven't done a unbind target call we can race where
iscsi_conn_teardown wakes up the EH thread and then frees the conn while
those threads are still accessing the conn ehwait.
We can only do one TMF per session so this just moves the TMF fields from
the conn to the session. We can then rely on the
iscsi_session_teardown->iscsi_remove_session->__iscsi_unbind_session call
to remove the target and it's devices, and know after that point there is
no device or scsi-ml callout trying to access the session. |
| In the Linux kernel, the following vulnerability has been resolved:
watchdog: Fix possible use-after-free in wdt_startup()
This module's remove path calls del_timer(). However, that function
does not wait until the timer handler finishes. This means that the
timer handler may still be running after the driver's remove function
has finished, which would result in a use-after-free.
Fix by calling del_timer_sync(), which makes sure the timer handler
has finished, and unable to re-schedule itself. |
| In the Linux kernel, the following vulnerability has been resolved:
watchdog: sc520_wdt: Fix possible use-after-free in wdt_turnoff()
This module's remove path calls del_timer(). However, that function
does not wait until the timer handler finishes. This means that the
timer handler may still be running after the driver's remove function
has finished, which would result in a use-after-free.
Fix by calling del_timer_sync(), which makes sure the timer handler
has finished, and unable to re-schedule itself. |
| In the Linux kernel, the following vulnerability has been resolved:
watchdog: Fix possible use-after-free by calling del_timer_sync()
This driver's remove path calls del_timer(). However, that function
does not wait until the timer handler finishes. This means that the
timer handler may still be running after the driver's remove function
has finished, which would result in a use-after-free.
Fix by calling del_timer_sync(), which makes sure the timer handler
has finished, and unable to re-schedule itself. |
