| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: Free skb when TX metadata options are invalid
When a new skb is allocated for transmitting an xsk descriptor, i.e., for
every non-multibuf descriptor or the first frag of a multibuf descriptor,
but the descriptor is later found to have invalid options set for the TX
metadata, the new skb is never freed. This can leak skbs until the send
buffer is full which makes sending more packets impossible.
Fix this by freeing the skb in the error path if we are currently dealing
with the first frag, i.e., an skb allocated in this iteration of
xsk_build_skb. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Don't retire aborted MMIO instruction
Returning an abort to the guest for an unsupported MMIO access is a
documented feature of the KVM UAPI. Nevertheless, it's clear that this
plumbing has seen limited testing, since userspace can trivially cause a
WARN in the MMIO return:
WARNING: CPU: 0 PID: 30558 at arch/arm64/include/asm/kvm_emulate.h:536 kvm_handle_mmio_return+0x46c/0x5c4 arch/arm64/include/asm/kvm_emulate.h:536
Call trace:
kvm_handle_mmio_return+0x46c/0x5c4 arch/arm64/include/asm/kvm_emulate.h:536
kvm_arch_vcpu_ioctl_run+0x98/0x15b4 arch/arm64/kvm/arm.c:1133
kvm_vcpu_ioctl+0x75c/0xa78 virt/kvm/kvm_main.c:4487
__do_sys_ioctl fs/ioctl.c:51 [inline]
__se_sys_ioctl fs/ioctl.c:893 [inline]
__arm64_sys_ioctl+0x14c/0x1c8 fs/ioctl.c:893
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49
el0_svc_common+0x1e0/0x23c arch/arm64/kernel/syscall.c:132
do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151
el0_svc+0x38/0x68 arch/arm64/kernel/entry-common.c:712
el0t_64_sync_handler+0x90/0xfc arch/arm64/kernel/entry-common.c:730
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598
The splat is complaining that KVM is advancing PC while an exception is
pending, i.e. that KVM is retiring the MMIO instruction despite a
pending synchronous external abort. Womp womp.
Fix the glaring UAPI bug by skipping over all the MMIO emulation in
case there is a pending synchronous exception. Note that while userspace
is capable of pending an asynchronous exception (SError, IRQ, or FIQ),
it is still safe to retire the MMIO instruction in this case as (1) they
are by definition asynchronous, and (2) KVM relies on hardware support
for pending/delivering these exceptions instead of the software state
machine for advancing PC. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Get rid of userspace_irqchip_in_use
Improper use of userspace_irqchip_in_use led to syzbot hitting the
following WARN_ON() in kvm_timer_update_irq():
WARNING: CPU: 0 PID: 3281 at arch/arm64/kvm/arch_timer.c:459
kvm_timer_update_irq+0x21c/0x394
Call trace:
kvm_timer_update_irq+0x21c/0x394 arch/arm64/kvm/arch_timer.c:459
kvm_timer_vcpu_reset+0x158/0x684 arch/arm64/kvm/arch_timer.c:968
kvm_reset_vcpu+0x3b4/0x560 arch/arm64/kvm/reset.c:264
kvm_vcpu_set_target arch/arm64/kvm/arm.c:1553 [inline]
kvm_arch_vcpu_ioctl_vcpu_init arch/arm64/kvm/arm.c:1573 [inline]
kvm_arch_vcpu_ioctl+0x112c/0x1b3c arch/arm64/kvm/arm.c:1695
kvm_vcpu_ioctl+0x4ec/0xf74 virt/kvm/kvm_main.c:4658
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl fs/ioctl.c:893 [inline]
__arm64_sys_ioctl+0x108/0x184 fs/ioctl.c:893
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall+0x78/0x1b8 arch/arm64/kernel/syscall.c:49
el0_svc_common+0xe8/0x1b0 arch/arm64/kernel/syscall.c:132
do_el0_svc+0x40/0x50 arch/arm64/kernel/syscall.c:151
el0_svc+0x54/0x14c arch/arm64/kernel/entry-common.c:712
el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598
The following sequence led to the scenario:
- Userspace creates a VM and a vCPU.
- The vCPU is initialized with KVM_ARM_VCPU_PMU_V3 during
KVM_ARM_VCPU_INIT.
- Without any other setup, such as vGIC or vPMU, userspace issues
KVM_RUN on the vCPU. Since the vPMU is requested, but not setup,
kvm_arm_pmu_v3_enable() fails in kvm_arch_vcpu_run_pid_change().
As a result, KVM_RUN returns after enabling the timer, but before
incrementing 'userspace_irqchip_in_use':
kvm_arch_vcpu_run_pid_change()
ret = kvm_arm_pmu_v3_enable()
if (!vcpu->arch.pmu.created)
return -EINVAL;
if (ret)
return ret;
[...]
if (!irqchip_in_kernel(kvm))
static_branch_inc(&userspace_irqchip_in_use);
- Userspace ignores the error and issues KVM_ARM_VCPU_INIT again.
Since the timer is already enabled, control moves through the
following flow, ultimately hitting the WARN_ON():
kvm_timer_vcpu_reset()
if (timer->enabled)
kvm_timer_update_irq()
if (!userspace_irqchip())
ret = kvm_vgic_inject_irq()
ret = vgic_lazy_init()
if (unlikely(!vgic_initialized(kvm)))
if (kvm->arch.vgic.vgic_model !=
KVM_DEV_TYPE_ARM_VGIC_V2)
return -EBUSY;
WARN_ON(ret);
Theoretically, since userspace_irqchip_in_use's functionality can be
simply replaced by '!irqchip_in_kernel()', get rid of the static key
to avoid the mismanagement, which also helps with the syzbot issue. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: nl80211: fix bounds checker error in nl80211_parse_sched_scan
The channels array in the cfg80211_scan_request has a __counted_by
attribute attached to it, which points to the n_channels variable. This
attribute is used in bounds checking, and if it is not set before the
array is filled, then the bounds sanitizer will issue a warning or a
kernel panic if CONFIG_UBSAN_TRAP is set.
This patch sets the size of allocated memory as the initial value for
n_channels. It is updated with the actual number of added elements after
the array is filled. |
| In the Linux kernel, the following vulnerability has been resolved:
ubi: fastmap: Fix duplicate slab cache names while attaching
Since commit 4c39529663b9 ("slab: Warn on duplicate cache names when
DEBUG_VM=y"), the duplicate slab cache names can be detected and a
kernel WARNING is thrown out.
In UBI fast attaching process, alloc_ai() could be invoked twice
with the same slab cache name 'ubi_aeb_slab_cache', which will trigger
following warning messages:
kmem_cache of name 'ubi_aeb_slab_cache' already exists
WARNING: CPU: 0 PID: 7519 at mm/slab_common.c:107
__kmem_cache_create_args+0x100/0x5f0
Modules linked in: ubi(+) nandsim [last unloaded: nandsim]
CPU: 0 UID: 0 PID: 7519 Comm: modprobe Tainted: G 6.12.0-rc2
RIP: 0010:__kmem_cache_create_args+0x100/0x5f0
Call Trace:
__kmem_cache_create_args+0x100/0x5f0
alloc_ai+0x295/0x3f0 [ubi]
ubi_attach+0x3c3/0xcc0 [ubi]
ubi_attach_mtd_dev+0x17cf/0x3fa0 [ubi]
ubi_init+0x3fb/0x800 [ubi]
do_init_module+0x265/0x7d0
__x64_sys_finit_module+0x7a/0xc0
The problem could be easily reproduced by loading UBI device by fastmap
with CONFIG_DEBUG_VM=y.
Fix it by using different slab names for alloc_ai() callers. |
| In the Linux kernel, the following vulnerability has been resolved:
net: fix crash when config small gso_max_size/gso_ipv4_max_size
Config a small gso_max_size/gso_ipv4_max_size will lead to an underflow
in sk_dst_gso_max_size(), which may trigger a BUG_ON crash,
because sk->sk_gso_max_size would be much bigger than device limits.
Call Trace:
tcp_write_xmit
tso_segs = tcp_init_tso_segs(skb, mss_now);
tcp_set_skb_tso_segs
tcp_skb_pcount_set
// skb->len = 524288, mss_now = 8
// u16 tso_segs = 524288/8 = 65535 -> 0
tso_segs = DIV_ROUND_UP(skb->len, mss_now)
BUG_ON(!tso_segs)
Add check for the minimum value of gso_max_size and gso_ipv4_max_size. |
| A flaw was found in polkit. A local user can exploit this by providing a specially crafted, excessively long input to the `polkit-agent-helper-1` setuid binary via standard input (stdin). This unbounded input can lead to an out-of-memory (OOM) condition, resulting in a Denial of Service (DoS) for the system. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_payload: sanitize offset and length before calling skb_checksum()
If access to offset + length is larger than the skbuff length, then
skb_checksum() triggers BUG_ON().
skb_checksum() internally subtracts the length parameter while iterating
over skbuff, BUG_ON(len) at the end of it checks that the expected
length to be included in the checksum calculation is fully consumed. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Don't call cleanup on profile rollback failure
When profile rollback fails in mlx5e_netdev_change_profile, the netdev
profile var is left set to NULL. Avoid a crash when unloading the driver
by not calling profile->cleanup in such a case.
This was encountered while testing, with the original trigger that
the wq rescuer thread creation got interrupted (presumably due to
Ctrl+C-ing modprobe), which gets converted to ENOMEM (-12) by
mlx5e_priv_init, the profile rollback also fails for the same reason
(signal still active) so the profile is left as NULL, leading to a crash
later in _mlx5e_remove.
[ 732.473932] mlx5_core 0000:08:00.1: E-Switch: Unload vfs: mode(OFFLOADS), nvfs(2), necvfs(0), active vports(2)
[ 734.525513] workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR
[ 734.557372] mlx5_core 0000:08:00.1: mlx5e_netdev_init_profile:6235:(pid 6086): mlx5e_priv_init failed, err=-12
[ 734.559187] mlx5_core 0000:08:00.1 eth3: mlx5e_netdev_change_profile: new profile init failed, -12
[ 734.560153] workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR
[ 734.589378] mlx5_core 0000:08:00.1: mlx5e_netdev_init_profile:6235:(pid 6086): mlx5e_priv_init failed, err=-12
[ 734.591136] mlx5_core 0000:08:00.1 eth3: mlx5e_netdev_change_profile: failed to rollback to orig profile, -12
[ 745.537492] BUG: kernel NULL pointer dereference, address: 0000000000000008
[ 745.538222] #PF: supervisor read access in kernel mode
<snipped>
[ 745.551290] Call Trace:
[ 745.551590] <TASK>
[ 745.551866] ? __die+0x20/0x60
[ 745.552218] ? page_fault_oops+0x150/0x400
[ 745.555307] ? exc_page_fault+0x79/0x240
[ 745.555729] ? asm_exc_page_fault+0x22/0x30
[ 745.556166] ? mlx5e_remove+0x6b/0xb0 [mlx5_core]
[ 745.556698] auxiliary_bus_remove+0x18/0x30
[ 745.557134] device_release_driver_internal+0x1df/0x240
[ 745.557654] bus_remove_device+0xd7/0x140
[ 745.558075] device_del+0x15b/0x3c0
[ 745.558456] mlx5_rescan_drivers_locked.part.0+0xb1/0x2f0 [mlx5_core]
[ 745.559112] mlx5_unregister_device+0x34/0x50 [mlx5_core]
[ 745.559686] mlx5_uninit_one+0x46/0xf0 [mlx5_core]
[ 745.560203] remove_one+0x4e/0xd0 [mlx5_core]
[ 745.560694] pci_device_remove+0x39/0xa0
[ 745.561112] device_release_driver_internal+0x1df/0x240
[ 745.561631] driver_detach+0x47/0x90
[ 745.562022] bus_remove_driver+0x84/0x100
[ 745.562444] pci_unregister_driver+0x3b/0x90
[ 745.562890] mlx5_cleanup+0xc/0x1b [mlx5_core]
[ 745.563415] __x64_sys_delete_module+0x14d/0x2f0
[ 745.563886] ? kmem_cache_free+0x1b0/0x460
[ 745.564313] ? lockdep_hardirqs_on_prepare+0xe2/0x190
[ 745.564825] do_syscall_64+0x6d/0x140
[ 745.565223] entry_SYSCALL_64_after_hwframe+0x4b/0x53
[ 745.565725] RIP: 0033:0x7f1579b1288b |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Use raw_spinlock_t in ringbuf
The function __bpf_ringbuf_reserve is invoked from a tracepoint, which
disables preemption. Using spinlock_t in this context can lead to a
"sleep in atomic" warning in the RT variant. This issue is illustrated
in the example below:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 556208, name: test_progs
preempt_count: 1, expected: 0
RCU nest depth: 1, expected: 1
INFO: lockdep is turned off.
Preemption disabled at:
[<ffffd33a5c88ea44>] migrate_enable+0xc0/0x39c
CPU: 7 PID: 556208 Comm: test_progs Tainted: G
Hardware name: Qualcomm SA8775P Ride (DT)
Call trace:
dump_backtrace+0xac/0x130
show_stack+0x1c/0x30
dump_stack_lvl+0xac/0xe8
dump_stack+0x18/0x30
__might_resched+0x3bc/0x4fc
rt_spin_lock+0x8c/0x1a4
__bpf_ringbuf_reserve+0xc4/0x254
bpf_ringbuf_reserve_dynptr+0x5c/0xdc
bpf_prog_ac3d15160d62622a_test_read_write+0x104/0x238
trace_call_bpf+0x238/0x774
perf_call_bpf_enter.isra.0+0x104/0x194
perf_syscall_enter+0x2f8/0x510
trace_sys_enter+0x39c/0x564
syscall_trace_enter+0x220/0x3c0
do_el0_svc+0x138/0x1dc
el0_svc+0x54/0x130
el0t_64_sync_handler+0x134/0x150
el0t_64_sync+0x17c/0x180
Switch the spinlock to raw_spinlock_t to avoid this error. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vboxvideo: Replace fake VLA at end of vbva_mouse_pointer_shape with real VLA
Replace the fake VLA at end of the vbva_mouse_pointer_shape shape with
a real VLA to fix a "memcpy: detected field-spanning write error" warning:
[ 13.319813] memcpy: detected field-spanning write (size 16896) of single field "p->data" at drivers/gpu/drm/vboxvideo/hgsmi_base.c:154 (size 4)
[ 13.319841] WARNING: CPU: 0 PID: 1105 at drivers/gpu/drm/vboxvideo/hgsmi_base.c:154 hgsmi_update_pointer_shape+0x192/0x1c0 [vboxvideo]
[ 13.320038] Call Trace:
[ 13.320173] hgsmi_update_pointer_shape [vboxvideo]
[ 13.320184] vbox_cursor_atomic_update [vboxvideo]
Note as mentioned in the added comment it seems the original length
calculation for the allocated and send hgsmi buffer is 4 bytes too large.
Changing this is not the goal of this patch, so this behavior is kept. |
| In the Linux kernel, the following vulnerability has been resolved:
vt: prevent kernel-infoleak in con_font_get()
font.data may not initialize all memory spaces depending on the implementation
of vc->vc_sw->con_font_get. This may cause info-leak, so to prevent this, it
is safest to modify it to initialize the allocated memory space to 0, and it
generally does not affect the overall performance of the system. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/xattr: missing fdput() in fremovexattr error path
In the Linux kernel, the fremovexattr() syscall calls fdget() to acquire a
file reference but returns early without calling fdput() when
strncpy_from_user() fails on the name argument. In multi-threaded processes
where fdget() takes the slow path, this permanently leaks one
file reference per call, pinning the struct file and associated kernel
objects in memory. An unprivileged local user can exploit this to cause
kernel memory exhaustion. The issue was inadvertently fixed by commit
a71874379ec8 ("xattr: switch to CLASS(fd)"). |
| In the Linux kernel, the following vulnerability has been resolved:
driver core: fix potential null-ptr-deref in device_add()
I got the following null-ptr-deref report while doing fault injection test:
BUG: kernel NULL pointer dereference, address: 0000000000000058
CPU: 2 PID: 278 Comm: 37-i2c-ds2482 Tainted: G B W N 6.1.0-rc3+
RIP: 0010:klist_put+0x2d/0xd0
Call Trace:
<TASK>
klist_remove+0xf1/0x1c0
device_release_driver_internal+0x196/0x210
bus_remove_device+0x1bd/0x240
device_add+0xd3d/0x1100
w1_add_master_device+0x476/0x490 [wire]
ds2482_probe+0x303/0x3e0 [ds2482]
This is how it happened:
w1_alloc_dev()
// The dev->driver is set to w1_master_driver.
memcpy(&dev->dev, device, sizeof(struct device));
device_add()
bus_add_device()
dpm_sysfs_add() // It fails, calls bus_remove_device.
// error path
bus_remove_device()
// The dev->driver is not null, but driver is not bound.
__device_release_driver()
klist_remove(&dev->p->knode_driver) <-- It causes null-ptr-deref.
// normal path
bus_probe_device() // It's not called yet.
device_bind_driver()
If dev->driver is set, in the error path after calling bus_add_device()
in device_add(), bus_remove_device() is called, then the device will be
detached from driver. But device_bind_driver() is not called yet, so it
causes null-ptr-deref while access the 'knode_driver'. To fix this, set
dev->driver to null in the error path before calling bus_remove_device(). |
| In the Linux kernel, the following vulnerability has been resolved:
tun: Fix memory leak for detached NAPI queue.
syzkaller reported [0] memory leaks of sk and skb related to the TUN
device with no repro, but we can reproduce it easily with:
struct ifreq ifr = {}
int fd_tun, fd_tmp;
char buf[4] = {};
fd_tun = openat(AT_FDCWD, "/dev/net/tun", O_WRONLY, 0);
ifr.ifr_flags = IFF_TUN | IFF_NAPI | IFF_MULTI_QUEUE;
ioctl(fd_tun, TUNSETIFF, &ifr);
ifr.ifr_flags = IFF_DETACH_QUEUE;
ioctl(fd_tun, TUNSETQUEUE, &ifr);
fd_tmp = socket(AF_PACKET, SOCK_PACKET, 0);
ifr.ifr_flags = IFF_UP;
ioctl(fd_tmp, SIOCSIFFLAGS, &ifr);
write(fd_tun, buf, sizeof(buf));
close(fd_tun);
If we enable NAPI and multi-queue on a TUN device, we can put skb into
tfile->sk.sk_write_queue after the queue is detached. We should prevent
it by checking tfile->detached before queuing skb.
Note this must be done under tfile->sk.sk_write_queue.lock because write()
and ioctl(IFF_DETACH_QUEUE) can run concurrently. Otherwise, there would
be a small race window:
write() ioctl(IFF_DETACH_QUEUE)
`- tun_get_user `- __tun_detach
|- if (tfile->detached) |- tun_disable_queue
| `-> false | `- tfile->detached = tun
| `- tun_queue_purge
|- spin_lock_bh(&queue->lock)
`- __skb_queue_tail(queue, skb)
Another solution is to call tun_queue_purge() when closing and
reattaching the detached queue, but it could paper over another
problems. Also, we do the same kind of test for IFF_NAPI_FRAGS.
[0]:
unreferenced object 0xffff88801edbc800 (size 2048):
comm "syz-executor.1", pid 33269, jiffies 4295743834 (age 18.756s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00 ...@............
backtrace:
[<000000008c16ea3d>] __do_kmalloc_node mm/slab_common.c:965 [inline]
[<000000008c16ea3d>] __kmalloc+0x4a/0x130 mm/slab_common.c:979
[<000000003addde56>] kmalloc include/linux/slab.h:563 [inline]
[<000000003addde56>] sk_prot_alloc+0xef/0x1b0 net/core/sock.c:2035
[<000000003e20621f>] sk_alloc+0x36/0x2f0 net/core/sock.c:2088
[<0000000028e43843>] tun_chr_open+0x3d/0x190 drivers/net/tun.c:3438
[<000000001b0f1f28>] misc_open+0x1a6/0x1f0 drivers/char/misc.c:165
[<000000004376f706>] chrdev_open+0x111/0x300 fs/char_dev.c:414
[<00000000614d379f>] do_dentry_open+0x2f9/0x750 fs/open.c:920
[<000000008eb24774>] do_open fs/namei.c:3636 [inline]
[<000000008eb24774>] path_openat+0x143f/0x1a30 fs/namei.c:3791
[<00000000955077b5>] do_filp_open+0xce/0x1c0 fs/namei.c:3818
[<00000000b78973b0>] do_sys_openat2+0xf0/0x260 fs/open.c:1356
[<00000000057be699>] do_sys_open fs/open.c:1372 [inline]
[<00000000057be699>] __do_sys_openat fs/open.c:1388 [inline]
[<00000000057be699>] __se_sys_openat fs/open.c:1383 [inline]
[<00000000057be699>] __x64_sys_openat+0x83/0xf0 fs/open.c:1383
[<00000000a7d2182d>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<00000000a7d2182d>] do_syscall_64+0x3c/0x90 arch/x86/entry/common.c:80
[<000000004cc4e8c4>] entry_SYSCALL_64_after_hwframe+0x72/0xdc
unreferenced object 0xffff88802f671700 (size 240):
comm "syz-executor.1", pid 33269, jiffies 4295743854 (age 18.736s)
hex dump (first 32 bytes):
68 c9 db 1e 80 88 ff ff 68 c9 db 1e 80 88 ff ff h.......h.......
00 c0 7b 2f 80 88 ff ff 00 c8 db 1e 80 88 ff ff ..{/............
backtrace:
[<00000000e9d9fdb6>] __alloc_skb+0x223/0x250 net/core/skbuff.c:644
[<000000002c3e4e0b>] alloc_skb include/linux/skbuff.h:1288 [inline]
[<000000002c3e4e0b>] alloc_skb_with_frags+0x6f/0x350 net/core/skbuff.c:6378
[<00000000825f98d7>] sock_alloc_send_pskb+0x3ac/0x3e0 net/core/sock.c:2729
[<00000000e9eb3df3>] tun_alloc_skb drivers/net/tun.c:1529 [inline]
[<
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: Zero padding when dumping algos and encap
When copying data to user-space we should ensure that only valid
data is copied over. Padding in structures may be filled with
random (possibly sensitve) data and should never be given directly
to user-space.
This patch fixes the copying of xfrm algorithms and the encap
template in xfrm_user so that padding is zeroed. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (xgene) Fix ioremap and memremap leak
Smatch reports:
drivers/hwmon/xgene-hwmon.c:757 xgene_hwmon_probe() warn:
'ctx->pcc_comm_addr' from ioremap() not released on line: 757.
This is because in drivers/hwmon/xgene-hwmon.c:701 xgene_hwmon_probe(),
ioremap and memremap is not released, which may cause a leak.
To fix this, ioremap and memremap is modified to devm_ioremap and
devm_memremap.
[groeck: Fixed formatting and subject] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915: Fix system suspend without fbdev being initialized
If fbdev is not initialized for some reason - in practice on platforms
without display - suspending fbdev should be skipped during system
suspend, fix this up. While at it add an assert that suspending fbdev
only happens with the display present.
This fixes the following:
[ 91.227923] PM: suspend entry (s2idle)
[ 91.254598] Filesystems sync: 0.025 seconds
[ 91.270518] Freezing user space processes
[ 91.272266] Freezing user space processes completed (elapsed 0.001 seconds)
[ 91.272686] OOM killer disabled.
[ 91.272872] Freezing remaining freezable tasks
[ 91.274295] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 91.659622] BUG: kernel NULL pointer dereference, address: 00000000000001c8
[ 91.659981] #PF: supervisor write access in kernel mode
[ 91.660252] #PF: error_code(0x0002) - not-present page
[ 91.660511] PGD 0 P4D 0
[ 91.660647] Oops: 0002 [#1] PREEMPT SMP NOPTI
[ 91.660875] CPU: 4 PID: 917 Comm: bash Not tainted 6.2.0-rc7+ #54
[ 91.661185] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20221117gitfff6d81270b5-9.fc37 unknown
[ 91.661680] RIP: 0010:mutex_lock+0x19/0x30
[ 91.661914] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 53 48 89 fb e8 62 d3 ff ff 31 c0 65 48 8b 14 25 00 15 03 00 <f0> 48 0f b1 13 75 06 5b c3 cc cc cc cc 48 89 df 5b eb b4 0f 1f 40
[ 91.662840] RSP: 0018:ffffa1e8011ffc08 EFLAGS: 00010246
[ 91.663087] RAX: 0000000000000000 RBX: 00000000000001c8 RCX: 0000000000000000
[ 91.663440] RDX: ffff8be455eb0000 RSI: 0000000000000001 RDI: 00000000000001c8
[ 91.663802] RBP: ffff8be459440000 R08: ffff8be459441f08 R09: ffffffff8e1432c0
[ 91.664167] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001
[ 91.664532] R13: 00000000000001c8 R14: 0000000000000000 R15: ffff8be442f4fb20
[ 91.664905] FS: 00007f28ffc16740(0000) GS:ffff8be4bb900000(0000) knlGS:0000000000000000
[ 91.665334] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 91.665626] CR2: 00000000000001c8 CR3: 0000000114926006 CR4: 0000000000770ee0
[ 91.665988] PKRU: 55555554
[ 91.666131] Call Trace:
[ 91.666265] <TASK>
[ 91.666381] intel_fbdev_set_suspend+0x97/0x1b0 [i915]
[ 91.666738] i915_drm_suspend+0xb9/0x100 [i915]
[ 91.667029] pci_pm_suspend+0x78/0x170
[ 91.667234] ? __pfx_pci_pm_suspend+0x10/0x10
[ 91.667461] dpm_run_callback+0x47/0x150
[ 91.667673] __device_suspend+0x10a/0x4e0
[ 91.667880] dpm_suspend+0x134/0x270
[ 91.668069] dpm_suspend_start+0x79/0x80
[ 91.668272] suspend_devices_and_enter+0x11b/0x890
[ 91.668526] pm_suspend.cold+0x270/0x2fc
[ 91.668737] state_store+0x46/0x90
[ 91.668916] kernfs_fop_write_iter+0x11b/0x200
[ 91.669153] vfs_write+0x1e1/0x3a0
[ 91.669336] ksys_write+0x53/0xd0
[ 91.669510] do_syscall_64+0x58/0xc0
[ 91.669699] ? syscall_exit_to_user_mode_prepare+0x18e/0x1c0
[ 91.669980] ? syscall_exit_to_user_mode_prepare+0x18e/0x1c0
[ 91.670278] ? syscall_exit_to_user_mode+0x17/0x40
[ 91.670524] ? do_syscall_64+0x67/0xc0
[ 91.670717] ? __irq_exit_rcu+0x3d/0x140
[ 91.670931] entry_SYSCALL_64_after_hwframe+0x72/0xdc
[ 91.671202] RIP: 0033:0x7f28ffd14284
v2: CC stable. (Jani)
References: https://gitlab.freedesktop.org/drm/intel/-/issues/8015
(cherry picked from commit 9542d708409a41449e99c9a464deb5e062c4bee2) |
| In the Linux kernel, the following vulnerability has been resolved:
srcu: Delegate work to the boot cpu if using SRCU_SIZE_SMALL
Commit 994f706872e6 ("srcu: Make Tree SRCU able to operate without
snp_node array") assumes that cpu 0 is always online. However, there
really are situations when some other CPU is the boot CPU, for example,
when booting a kdump kernel with the maxcpus=1 boot parameter.
On PowerPC, the kdump kernel can hang as follows:
...
[ 1.740036] systemd[1]: Hostname set to <xyz.com>
[ 243.686240] INFO: task systemd:1 blocked for more than 122 seconds.
[ 243.686264] Not tainted 6.1.0-rc1 #1
[ 243.686272] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 243.686281] task:systemd state:D stack:0 pid:1 ppid:0 flags:0x00042000
[ 243.686296] Call Trace:
[ 243.686301] [c000000016657640] [c000000016657670] 0xc000000016657670 (unreliable)
[ 243.686317] [c000000016657830] [c00000001001dec0] __switch_to+0x130/0x220
[ 243.686333] [c000000016657890] [c000000010f607b8] __schedule+0x1f8/0x580
[ 243.686347] [c000000016657940] [c000000010f60bb4] schedule+0x74/0x140
[ 243.686361] [c0000000166579b0] [c000000010f699b8] schedule_timeout+0x168/0x1c0
[ 243.686374] [c000000016657a80] [c000000010f61de8] __wait_for_common+0x148/0x360
[ 243.686387] [c000000016657b20] [c000000010176bb0] __flush_work.isra.0+0x1c0/0x3d0
[ 243.686401] [c000000016657bb0] [c0000000105f2768] fsnotify_wait_marks_destroyed+0x28/0x40
[ 243.686415] [c000000016657bd0] [c0000000105f21b8] fsnotify_destroy_group+0x68/0x160
[ 243.686428] [c000000016657c40] [c0000000105f6500] inotify_release+0x30/0xa0
[ 243.686440] [c000000016657cb0] [c0000000105751a8] __fput+0xc8/0x350
[ 243.686452] [c000000016657d00] [c00000001017d524] task_work_run+0xe4/0x170
[ 243.686464] [c000000016657d50] [c000000010020e94] do_notify_resume+0x134/0x140
[ 243.686478] [c000000016657d80] [c00000001002eb18] interrupt_exit_user_prepare_main+0x198/0x270
[ 243.686493] [c000000016657de0] [c00000001002ec60] syscall_exit_prepare+0x70/0x180
[ 243.686505] [c000000016657e10] [c00000001000bf7c] system_call_vectored_common+0xfc/0x280
[ 243.686520] --- interrupt: 3000 at 0x7fffa47d5ba4
[ 243.686528] NIP: 00007fffa47d5ba4 LR: 0000000000000000 CTR: 0000000000000000
[ 243.686538] REGS: c000000016657e80 TRAP: 3000 Not tainted (6.1.0-rc1)
[ 243.686548] MSR: 800000000000d033 <SF,EE,PR,ME,IR,DR,RI,LE> CR: 42044440 XER: 00000000
[ 243.686572] IRQMASK: 0
[ 243.686572] GPR00: 0000000000000006 00007ffffa606710 00007fffa48e7200 0000000000000000
[ 243.686572] GPR04: 0000000000000002 000000000000000a 0000000000000000 0000000000000001
[ 243.686572] GPR08: 000001000c172dd0 0000000000000000 0000000000000000 0000000000000000
[ 243.686572] GPR12: 0000000000000000 00007fffa4ff4bc0 0000000000000000 0000000000000000
[ 243.686572] GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 243.686572] GPR20: 0000000132dfdc50 000000000000000e 0000000000189375 0000000000000000
[ 243.686572] GPR24: 00007ffffa606ae0 0000000000000005 000001000c185490 000001000c172570
[ 243.686572] GPR28: 000001000c172990 000001000c184850 000001000c172e00 00007fffa4fedd98
[ 243.686683] NIP [00007fffa47d5ba4] 0x7fffa47d5ba4
[ 243.686691] LR [0000000000000000] 0x0
[ 243.686698] --- interrupt: 3000
[ 243.686708] INFO: task kworker/u16:1:24 blocked for more than 122 seconds.
[ 243.686717] Not tainted 6.1.0-rc1 #1
[ 243.686724] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 243.686733] task:kworker/u16:1 state:D stack:0 pid:24 ppid:2 flags:0x00000800
[ 243.686747] Workqueue: events_unbound fsnotify_mark_destroy_workfn
[ 243.686758] Call Trace:
[ 243.686762] [c0000000166736e0] [c00000004fd91000] 0xc00000004fd91000 (unreliable)
[ 243.686775] [c0000000166738d0] [c00000001001dec0] __switch_to+0x130/0x220
[ 243.686788] [c000000016673930] [c000000010f607b8] __schedule+0x1f8/0x
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-core: fix dev_pm_qos memleak
Call dev_pm_qos_hide_latency_tolerance() in the error unwind patch to
avoid following kmemleak:-
blktests (master) # kmemleak-clear; ./check nvme/044;
blktests (master) # kmemleak-scan ; kmemleak-show
nvme/044 (Test bi-directional authentication) [passed]
runtime 2.111s ... 2.124s
unreferenced object 0xffff888110c46240 (size 96):
comm "nvme", pid 33461, jiffies 4345365353 (age 75.586s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<0000000069ac2cec>] kmalloc_trace+0x25/0x90
[<000000006acc66d5>] dev_pm_qos_update_user_latency_tolerance+0x6f/0x100
[<00000000cc376ea7>] nvme_init_ctrl+0x38e/0x410 [nvme_core]
[<000000007df61b4b>] 0xffffffffc05e88b3
[<00000000d152b985>] 0xffffffffc05744cb
[<00000000f04a4041>] vfs_write+0xc5/0x3c0
[<00000000f9491baf>] ksys_write+0x5f/0xe0
[<000000001c46513d>] do_syscall_64+0x3b/0x90
[<00000000ecf348fe>] entry_SYSCALL_64_after_hwframe+0x72/0xdc |
