| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| CryptoLib provides a software-only solution using the CCSDS Space Data Link Security Protocol - Extended Procedures (SDLS-EP) to secure communications between a spacecraft running the core Flight System (cFS) and a ground station. Prier to 1.4.2, there is a missing bounds check in Crypto_Key_update() (crypto_key_mgmt.c) which allows a remote attacker to trigger a stack-based buffer overflow by supplying a TLV packet with a spoofed length field. The function calculates the number of keys from an attacker-controlled field (pdu_len), which may exceed the static array size (kblk[98]), leading to an out-of-bounds write and potential memory corruption. This vulnerability is fixed in 1.4.2. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix WARNING in ip6_route_net_exit_late()
During the initialization of ip6_route_net_init_late(), if file
ipv6_route or rt6_stats fails to be created, the initialization is
successful by default. Therefore, the ipv6_route or rt6_stats file
doesn't be found during the remove in ip6_route_net_exit_late(). It
will cause WRNING.
The following is the stack information:
name 'rt6_stats'
WARNING: CPU: 0 PID: 9 at fs/proc/generic.c:712 remove_proc_entry+0x389/0x460
Modules linked in:
Workqueue: netns cleanup_net
RIP: 0010:remove_proc_entry+0x389/0x460
PKRU: 55555554
Call Trace:
<TASK>
ops_exit_list+0xb0/0x170
cleanup_net+0x4ea/0xb00
process_one_work+0x9bf/0x1710
worker_thread+0x665/0x1080
kthread+0x2e4/0x3a0
ret_from_fork+0x1f/0x30
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: Fix possible leaked pernet namespace in smc_init()
In smc_init(), register_pernet_subsys(&smc_net_stat_ops) is called
without any error handling.
If it fails, registering of &smc_net_ops won't be reverted.
And if smc_nl_init() fails, &smc_net_stat_ops itself won't be reverted.
This leaves wild ops in subsystem linkedlist and when another module
tries to call register_pernet_operations() it triggers page fault:
BUG: unable to handle page fault for address: fffffbfff81b964c
RIP: 0010:register_pernet_operations+0x1b9/0x5f0
Call Trace:
<TASK>
register_pernet_subsys+0x29/0x40
ebtables_init+0x58/0x1000 [ebtables]
... |
| In the Linux kernel, the following vulnerability has been resolved:
net: mdio: fix undefined behavior in bit shift for __mdiobus_register
Shifting signed 32-bit value by 31 bits is undefined, so changing
significant bit to unsigned. The UBSAN warning calltrace like below:
UBSAN: shift-out-of-bounds in drivers/net/phy/mdio_bus.c:586:27
left shift of 1 by 31 places cannot be represented in type 'int'
Call Trace:
<TASK>
dump_stack_lvl+0x7d/0xa5
dump_stack+0x15/0x1b
ubsan_epilogue+0xe/0x4e
__ubsan_handle_shift_out_of_bounds+0x1e7/0x20c
__mdiobus_register+0x49d/0x4e0
fixed_mdio_bus_init+0xd8/0x12d
do_one_initcall+0x76/0x430
kernel_init_freeable+0x3b3/0x422
kernel_init+0x24/0x1e0
ret_from_fork+0x1f/0x30
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix use-after-free caused by l2cap_reassemble_sdu
Fix the race condition between the following two flows that run in
parallel:
1. l2cap_reassemble_sdu -> chan->ops->recv (l2cap_sock_recv_cb) ->
__sock_queue_rcv_skb.
2. bt_sock_recvmsg -> skb_recv_datagram, skb_free_datagram.
An SKB can be queued by the first flow and immediately dequeued and
freed by the second flow, therefore the callers of l2cap_reassemble_sdu
can't use the SKB after that function returns. However, some places
continue accessing struct l2cap_ctrl that resides in the SKB's CB for a
short time after l2cap_reassemble_sdu returns, leading to a
use-after-free condition (the stack trace is below, line numbers for
kernel 5.19.8).
Fix it by keeping a local copy of struct l2cap_ctrl.
BUG: KASAN: use-after-free in l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth
Read of size 1 at addr ffff88812025f2f0 by task kworker/u17:3/43169
Workqueue: hci0 hci_rx_work [bluetooth]
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:107 (discriminator 4))
print_report.cold (mm/kasan/report.c:314 mm/kasan/report.c:429)
? l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth
kasan_report (mm/kasan/report.c:162 mm/kasan/report.c:493)
? l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth
l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth
l2cap_rx (net/bluetooth/l2cap_core.c:7236 net/bluetooth/l2cap_core.c:7271) bluetooth
ret_from_fork (arch/x86/entry/entry_64.S:306)
</TASK>
Allocated by task 43169:
kasan_save_stack (mm/kasan/common.c:39)
__kasan_slab_alloc (mm/kasan/common.c:45 mm/kasan/common.c:436 mm/kasan/common.c:469)
kmem_cache_alloc_node (mm/slab.h:750 mm/slub.c:3243 mm/slub.c:3293)
__alloc_skb (net/core/skbuff.c:414)
l2cap_recv_frag (./include/net/bluetooth/bluetooth.h:425 net/bluetooth/l2cap_core.c:8329) bluetooth
l2cap_recv_acldata (net/bluetooth/l2cap_core.c:8442) bluetooth
hci_rx_work (net/bluetooth/hci_core.c:3642 net/bluetooth/hci_core.c:3832) bluetooth
process_one_work (kernel/workqueue.c:2289)
worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2437)
kthread (kernel/kthread.c:376)
ret_from_fork (arch/x86/entry/entry_64.S:306)
Freed by task 27920:
kasan_save_stack (mm/kasan/common.c:39)
kasan_set_track (mm/kasan/common.c:45)
kasan_set_free_info (mm/kasan/generic.c:372)
____kasan_slab_free (mm/kasan/common.c:368 mm/kasan/common.c:328)
slab_free_freelist_hook (mm/slub.c:1780)
kmem_cache_free (mm/slub.c:3536 mm/slub.c:3553)
skb_free_datagram (./include/net/sock.h:1578 ./include/net/sock.h:1639 net/core/datagram.c:323)
bt_sock_recvmsg (net/bluetooth/af_bluetooth.c:295) bluetooth
l2cap_sock_recvmsg (net/bluetooth/l2cap_sock.c:1212) bluetooth
sock_read_iter (net/socket.c:1087)
new_sync_read (./include/linux/fs.h:2052 fs/read_write.c:401)
vfs_read (fs/read_write.c:482)
ksys_read (fs/read_write.c:620)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: enforce documented limit to prevent allocating huge memory
Daniel Xu reported that the hash:net,iface type of the ipset subsystem does
not limit adding the same network with different interfaces to a set, which
can lead to huge memory usage or allocation failure.
The quick reproducer is
$ ipset create ACL.IN.ALL_PERMIT hash:net,iface hashsize 1048576 timeout 0
$ for i in $(seq 0 100); do /sbin/ipset add ACL.IN.ALL_PERMIT 0.0.0.0/0,kaf_$i timeout 0 -exist; done
The backtrace when vmalloc fails:
[Tue Oct 25 00:13:08 2022] ipset: vmalloc error: size 1073741848, exceeds total pages
<...>
[Tue Oct 25 00:13:08 2022] Call Trace:
[Tue Oct 25 00:13:08 2022] <TASK>
[Tue Oct 25 00:13:08 2022] dump_stack_lvl+0x48/0x60
[Tue Oct 25 00:13:08 2022] warn_alloc+0x155/0x180
[Tue Oct 25 00:13:08 2022] __vmalloc_node_range+0x72a/0x760
[Tue Oct 25 00:13:08 2022] ? hash_netiface4_add+0x7c0/0xb20
[Tue Oct 25 00:13:08 2022] ? __kmalloc_large_node+0x4a/0x90
[Tue Oct 25 00:13:08 2022] kvmalloc_node+0xa6/0xd0
[Tue Oct 25 00:13:08 2022] ? hash_netiface4_resize+0x99/0x710
<...>
The fix is to enforce the limit documented in the ipset(8) manpage:
> The internal restriction of the hash:net,iface set type is that the same
> network prefix cannot be stored with more than 64 different interfaces
> in a single set. |
| SAP CommonCryptoLib does not perform necessary boundary checks during pre-authentication parsing of manipulated ASN.1 data over the network. This may result in memory corruption followed by an application crash, hence leading to a high impact on availability. There is no impact on confidentiality or integrity. |
| SAP S/4HANA landscape SAP E-Recruiting BSP allows an unauthenticated attacker to craft malicious links, when clicked the victim could be redirected to the page controlled by the attacker. This has low impact on confidentiality and integrity of the application with no impact on availability. |
| Due to an Information Disclosure vulnerability in SAP NetWeaver Application Server Java, internal metadata files could be accessed via manipulated URLs. An unauthenticated attacker could exploit this vulnerability by inserting arbitrary path components in the request, allowing unauthorized access to sensitive application metadata. This results in a partial compromise of the confidentiality of the information without affecting the integrity or availability of the application server. |
| SAP S4CORE (Manage journal entries) does not perform necessary authorization checks for an authenticated user resulting in escalation of privileges. This has low impact on confidentiality of the application with no impact on integrity and availability of the application. |
| Due to information disclosure vulnerability in anonymous API provided by SAP Business One (SLD), an attacker with normal user access could gain access to unauthorized information. As a result, it has a low impact on the confidentiality of the application but no impact on the integrity and availability. |
| Due to insufficient validation of connection property values, the SAP HANA JDBC Client allows a high-privilege locally authenticated user to supply crafted parameters that lead to unauthorized code loading, resulting in low impact on confidentiality and integrity and high impact on availability of the application. |
| Due to a Path Traversal vulnerability in SAP Business Connector, an attacker authenticated as an administrator with adjacent access could read, write, overwrite, and delete arbitrary files on the host system. Successful exploitation could enable the attacker to execute arbitrary operating system commands on the server, resulting in a complete compromise of the confidentiality, integrity, and availability of the affected system. |
| Due to an Open Redirect vulnerability in SAP Business Connector, an unauthenticated attacker could craft a malicious URL that, if accessed by a victim, redirects them to an attacker-controlled site displayed within an embedded frame. Successful exploitation could allow the attacker to steal sensitive information and perform unauthorized actions, impacting the confidentiality and integrity of web client data. There is no impact to system availability resulting from this vulnerability. |
| Due to an OS Command Injection vulnerability in SAP Business Connector, an authenticated attacker with administrative access and adjacent network access could upload specially crafted content to the server. If processed by the application, this content enables execution of arbitrary operating system commands. Successful exploitation could lead to full compromise of the system�s confidentiality, integrity, and availability. |
| SQL Anywhere Monitor (Non-GUI) baked credentials into the code,exposing the resources or functionality to unintended users and providing attackers with the possibility of arbitrary code execution.This could cause high impact on confidentiality integrity and availability of the system. |
| SAP Starter Solution allows an authenticated attacker to execute crafted database queries, thereby exposing the back-end database. As a result, this vulnerability has a low impact on the application's confidentiality and integrity but no impact on its availability. |
| SAP GUI for Windows may allow a highly privileged user on the affected client PC to locally access sensitive information stored in process memory during runtime.This vulnerability has a high impact on confidentiality, with no impact on integrity and availability. |
| Due to missing input sanitation, SAP Solution Manager allows an authenticated attacker to insert malicious code when calling a remote-enabled function module. This could provide the attacker with full control of the system hence leading to high impact on confidentiality, integrity and availability of the system. |
| Due to a Reflected Cross-Site Scripting (XSS) vulnerability in SAP Business Connector, an unauthenticated attacker could generate a malicious link and make it publicly accessible. If an authenticated victim accesses this link, the injected input is processed during web page generation, resulting in the execution of malicious content in the victim's browser context. This could allow the attacker to access or modify information within the victim�s browser scope, impacting confidentiality and integrity, while availability remains unaffected |
