| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In certain circumstances, Spring Boot's default web security is ineffective allowing unauthorized access to all endpoints. For an application to be vulnerable, it must: be a servlet-based web application; have no Spring Security configuration of its own and rely on the default web security filter chain; depend on spring-boot-actuator-autoconfigure; not depend on spring-boot-health. If any of the above does not apply, the application is not vulnerable.
Affected: Spring Boot 4.0.0–4.0.5; upgrade to 4.0.6 or later per vendor advisory. |
| A flaw has been found in SourceCodester Pizzafy Ecommerce System 1.0. This affects the function save_user of the file /admin/ajax.php?action=save_user. Executing a manipulation can lead to sql injection. The attack can be launched remotely. The exploit has been published and may be used. |
| A vulnerability was detected in SourceCodester Pizzafy Ecommerce System 1.0. Affected by this issue is the function save_menu of the file /admin/ajax.php?action=save_menu. Performing a manipulation results in sql injection. The attack can be initiated remotely. The exploit is now public and may be used. |
| A flaw has been found in SourceCodester Pharmacy Sales and Inventory System 1.0. This affects the function save_supplier of the file /ajax.php?action=save_supplier. This manipulation of the argument ID causes sql injection. Remote exploitation of the attack is possible. The exploit has been published and may be used. |
| OpenClaw before 2026.3.31 contains an authentication bypass vulnerability where unauthenticated plugin-auth HTTP routes receive operator runtime write scopes. Attackers can access these routes without authentication to perform privileged runtime actions intended for authorized operators. |
| A security vulnerability has been detected in SourceCodester Pizzafy Ecommerce System 1.0. Affected by this vulnerability is the function save_settings of the file /pizzafy/admin/ajax.php?action=save_settings of the component Setting Handler. Such manipulation leads to sql injection. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used. |
| A flaw has been found in SourceCodester Pet Grooming Management Software 1.0. This vulnerability affects unknown code of the file /admin/update_customer.php. This manipulation of the argument type/length/business parameter validity causes sql injection. The attack is possible to be carried out remotely. The exploit has been published and may be used. |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Steve Burge TaxoPress simple-tags allows Blind SQL Injection.This issue affects TaxoPress: from n/a through <= 3.44.0. |
| Missing Authorization vulnerability in Graham Quick Interest Slider quick-interest-slider allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Quick Interest Slider: from n/a through <= 3.1.7. |
| A vulnerability has been found in FRRouting FRR up to 10.5.1. This affects the function process_type2_route of the file bgpd/bgp_evpn.c of the component EVPN Type-2 Route Handler. The manipulation leads to improper access controls. The attack can be initiated remotely. The attack is considered to have high complexity. The exploitability is reported as difficult. The identifier of the patch is 7676cad65114aa23adde583d91d9d29e2debd045. To fix this issue, it is recommended to deploy a patch. |
| Missing Authorization vulnerability in merkulove Motionger for Elementor motionger-elementor allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Motionger for Elementor: from n/a through <= 2.0.4. |
| SocialEngine versions 7.8.0 and prior contain a SQL injection vulnerability in the /activity/index/get-memberall endpoint where user-supplied input passed via the text parameter is not sanitized before being incorporated into a SQL query. An unauthenticated remote attacker can exploit this vulnerability to read arbitrary data from the database, reset administrator account passwords, and gain unauthorized access to the Packages Manager in the Admin Panel, potentially enabling remote code execution. |
| LiteLLM is a proxy server (AI Gateway) to call LLM APIs in OpenAI (or native) format. Prior to 1.83.0, the /config/update endpoint does not enforce admin role authorization. A user who is already authenticated into the platform can then use this endpoint to modify proxy configuration and environment variables, register custom pass-through endpoint handlers pointing to attacker-controlled Python code, achieving remote code execution, read arbitrary server files by setting UI_LOGO_PATH and fetching via /get_image, and take over other privileged accounts by overwriting UI_USERNAME and UI_PASSWORD environment variables. Fixed in v1.83.0. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/xe: Reorganize the init to decouple migration from reset
Attempting to issue reset on VF devices that don't support migration
leads to the following:
BUG: unable to handle page fault for address: 00000000000011f8
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 2 UID: 0 PID: 7443 Comm: xe_sriov_flr Tainted: G S U 7.0.0-rc1-lgci-xe-xe-4588-cec43d5c2696af219-nodebug+ #1 PREEMPT(lazy)
Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER
Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P DDR4 RVP, BIOS RPLPFWI1.R00.4035.A00.2301200723 01/20/2023
RIP: 0010:xe_sriov_vfio_wait_flr_done+0xc/0x80 [xe]
Code: ff c3 cc cc cc cc 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 54 53 <83> bf f8 11 00 00 02 75 61 41 89 f4 85 f6 74 52 48 8b 47 08 48 89
RSP: 0018:ffffc9000f7c39b8 EFLAGS: 00010202
RAX: ffffffffa04d8660 RBX: ffff88813e3e4000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffc9000f7c39c8 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff888101a48800
R13: ffff88813e3e4150 R14: ffff888130d0d008 R15: ffff88813e3e40d0
FS: 00007877d3d0d940(0000) GS:ffff88890b6d3000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000011f8 CR3: 000000015a762000 CR4: 0000000000f52ef0
PKRU: 55555554
Call Trace:
<TASK>
xe_vfio_pci_reset_done+0x49/0x120 [xe_vfio_pci]
pci_dev_restore+0x3b/0x80
pci_reset_function+0x109/0x140
reset_store+0x5c/0xb0
dev_attr_store+0x17/0x40
sysfs_kf_write+0x72/0x90
kernfs_fop_write_iter+0x161/0x1f0
vfs_write+0x261/0x440
ksys_write+0x69/0xf0
__x64_sys_write+0x19/0x30
x64_sys_call+0x259/0x26e0
do_syscall_64+0xcb/0x1500
? __fput+0x1a2/0x2d0
? fput_close_sync+0x3d/0xa0
? __x64_sys_close+0x3e/0x90
? x64_sys_call+0x1b7c/0x26e0
? do_syscall_64+0x109/0x1500
? __task_pid_nr_ns+0x68/0x100
? __do_sys_getpid+0x1d/0x30
? x64_sys_call+0x10b5/0x26e0
? do_syscall_64+0x109/0x1500
? putname+0x41/0x90
? do_faccessat+0x1e8/0x300
? __x64_sys_access+0x1c/0x30
? x64_sys_call+0x1822/0x26e0
? do_syscall_64+0x109/0x1500
? tick_program_event+0x43/0xa0
? hrtimer_interrupt+0x126/0x260
? irqentry_exit+0xb2/0x710
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7877d5f1c5a4
Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d a5 ea 0e 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89
RSP: 002b:00007fff48e5f908 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007877d5f1c5a4
RDX: 0000000000000001 RSI: 00007877d621b0c9 RDI: 0000000000000009
RBP: 0000000000000001 R08: 00005fb49113b010 R09: 0000000000000007
R10: 0000000000000000 R11: 0000000000000202 R12: 00007877d621b0c9
R13: 0000000000000009 R14: 00007fff48e5fac0 R15: 00007fff48e5fac0
</TASK>
This is caused by the fact that some of the xe_vfio_pci_core_device
members needed for handling reset are only initialized as part of
migration init.
Fix the problem by reorganizing the code to decouple VF init from
migration init. |
| Missing Authorization vulnerability in Mikado-Themes Powerlift powerlift allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Powerlift: from n/a through < 3.2.1. |
| A vulnerability has been found in Free5GC 4.2.0. The affected element is an unknown function of the component aper. Such manipulation leads to type confusion. The attack may be launched remotely. This attack is characterized by high complexity. The exploitability is described as difficult. The exploit has been disclosed to the public and may be used. The name of the patch is 26205eb01705754b7b902ad6c4b613c96c881e29. It is best practice to apply a patch to resolve this issue. |
| A vulnerability was determined in SourceCodester Pizzafy Ecommerce System 1.0. Affected by this vulnerability is an unknown functionality of the file /admin/view_order.php of the component GET Parameter Handler. Executing a manipulation of the argument ID can lead to sql injection. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized. |
| OpenClaw before 2026.3.28 contains an exec allowlist bypass vulnerability where allow-always persistence fails to unwrap /usr/bin/script and similar wrappers before storing trust decisions. Attackers can obtain user approval for one wrapped command to persist trust for wrapper binaries that execute different underlying programs. |
| Dovecot SQL based authentication can be bypassed when auth_username_chars is cleared by admin. This vulnerability allows bypassing authentication for any user and user enumeration. Do not clear auth_username_chars. If this is not possible, install latest fixed version. No publicly available exploits are known. |
| OpenClaw before 2026.3.31 allows workspace .env files to override the OPENCLAW_BUNDLED_PLUGINS_DIR environment variable, compromising plugin trust verification. Attackers with control over workspace configuration can inject malicious plugins by overriding the bundled plugin trust root directory. |
