| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
slab: Fix too strict alignment check in create_cache()
On m68k, where the minimum alignment of unsigned long is 2 bytes:
Kernel panic - not syncing: __kmem_cache_create_args: Failed to create slab 'io_kiocb'. Error -22
CPU: 0 UID: 0 PID: 1 Comm: swapper Not tainted 6.12.0-atari-03776-g7eaa1f99261a #1783
Stack from 0102fe5c:
0102fe5c 00514a2b 00514a2b ffffff00 00000001 0051f5ed 00425e78 00514a2b
0041eb74 ffffffea 00000310 0051f5ed ffffffea ffffffea 00601f60 00000044
0102ff20 000e7a68 0051ab8e 004383b8 0051f5ed ffffffea 000000b8 00000007
01020c00 00000000 000e77f0 0041e5f0 005f67c0 0051f5ed 000000b6 0102fef4
00000310 0102fef4 00000000 00000016 005f676c 0060a34c 00000010 00000004
00000038 0000009a 01000000 000000b8 005f668e 0102e000 00001372 0102ff88
Call Trace: [<00425e78>] dump_stack+0xc/0x10
[<0041eb74>] panic+0xd8/0x26c
[<000e7a68>] __kmem_cache_create_args+0x278/0x2e8
[<000e77f0>] __kmem_cache_create_args+0x0/0x2e8
[<0041e5f0>] memset+0x0/0x8c
[<005f67c0>] io_uring_init+0x54/0xd2
The minimal alignment of an integral type may differ from its size,
hence is not safe to assume that an arbitrary freeptr_t (which is
basically an unsigned long) is always aligned to 4 or 8 bytes.
As nothing seems to require the additional alignment, it is safe to fix
this by relaxing the check to the actual minimum alignment of freeptr_t. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: master: Fix miss free init_dyn_addr at i3c_master_put_i3c_addrs()
if (dev->boardinfo && dev->boardinfo->init_dyn_addr)
^^^ here check "init_dyn_addr"
i3c_bus_set_addr_slot_status(&master->bus, dev->info.dyn_addr, ...)
^^^^
free "dyn_addr"
Fix copy/paste error "dyn_addr" by replacing it with "init_dyn_addr". |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: altera-msgdma: properly free descriptor in msgdma_free_descriptor
Remove list_del call in msgdma_chan_desc_cleanup, this should be the role
of msgdma_free_descriptor. In consequence replace list_add_tail with
list_move_tail in msgdma_free_descriptor.
This fixes the path:
msgdma_free_chan_resources -> msgdma_free_descriptors ->
msgdma_free_desc_list -> msgdma_free_descriptor
which does not correctly free the descriptors as first nodes were not
removed from the list. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_conn: Use disable_delayed_work_sync
This makes use of disable_delayed_work_sync instead
cancel_delayed_work_sync as it not only cancel the ongoing work but also
disables new submit which is disarable since the object holding the work
is about to be freed. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/deadline: Fix warning in migrate_enable for boosted tasks
When running the following command:
while true; do
stress-ng --cyclic 30 --timeout 30s --minimize --quiet
done
a warning is eventually triggered:
WARNING: CPU: 43 PID: 2848 at kernel/sched/deadline.c:794
setup_new_dl_entity+0x13e/0x180
...
Call Trace:
<TASK>
? show_trace_log_lvl+0x1c4/0x2df
? enqueue_dl_entity+0x631/0x6e0
? setup_new_dl_entity+0x13e/0x180
? __warn+0x7e/0xd0
? report_bug+0x11a/0x1a0
? handle_bug+0x3c/0x70
? exc_invalid_op+0x14/0x70
? asm_exc_invalid_op+0x16/0x20
enqueue_dl_entity+0x631/0x6e0
enqueue_task_dl+0x7d/0x120
__do_set_cpus_allowed+0xe3/0x280
__set_cpus_allowed_ptr_locked+0x140/0x1d0
__set_cpus_allowed_ptr+0x54/0xa0
migrate_enable+0x7e/0x150
rt_spin_unlock+0x1c/0x90
group_send_sig_info+0xf7/0x1a0
? kill_pid_info+0x1f/0x1d0
kill_pid_info+0x78/0x1d0
kill_proc_info+0x5b/0x110
__x64_sys_kill+0x93/0xc0
do_syscall_64+0x5c/0xf0
entry_SYSCALL_64_after_hwframe+0x6e/0x76
RIP: 0033:0x7f0dab31f92b
This warning occurs because set_cpus_allowed dequeues and enqueues tasks
with the ENQUEUE_RESTORE flag set. If the task is boosted, the warning
is triggered. A boosted task already had its parameters set by
rt_mutex_setprio, and a new call to setup_new_dl_entity is unnecessary,
hence the WARN_ON call.
Check if we are requeueing a boosted task and avoid calling
setup_new_dl_entity if that's the case. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/tctx: work around xa_store() allocation error issue
syzbot triggered the following WARN_ON:
WARNING: CPU: 0 PID: 16 at io_uring/tctx.c:51 __io_uring_free+0xfa/0x140 io_uring/tctx.c:51
which is the
WARN_ON_ONCE(!xa_empty(&tctx->xa));
sanity check in __io_uring_free() when a io_uring_task is going through
its final put. The syzbot test case includes injecting memory allocation
failures, and it very much looks like xa_store() can fail one of its
memory allocations and end up with ->head being non-NULL even though no
entries exist in the xarray.
Until this issue gets sorted out, work around it by attempting to
iterate entries in our xarray, and WARN_ON_ONCE() if one is found. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix f2fs_bug_on when uninstalling filesystem call f2fs_evict_inode.
creating a large files during checkpoint disable until it runs out of
space and then delete it, then remount to enable checkpoint again, and
then unmount the filesystem triggers the f2fs_bug_on as below:
------------[ cut here ]------------
kernel BUG at fs/f2fs/inode.c:896!
CPU: 2 UID: 0 PID: 1286 Comm: umount Not tainted 6.11.0-rc7-dirty #360
Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:f2fs_evict_inode+0x58c/0x610
Call Trace:
__die_body+0x15/0x60
die+0x33/0x50
do_trap+0x10a/0x120
f2fs_evict_inode+0x58c/0x610
do_error_trap+0x60/0x80
f2fs_evict_inode+0x58c/0x610
exc_invalid_op+0x53/0x60
f2fs_evict_inode+0x58c/0x610
asm_exc_invalid_op+0x16/0x20
f2fs_evict_inode+0x58c/0x610
evict+0x101/0x260
dispose_list+0x30/0x50
evict_inodes+0x140/0x190
generic_shutdown_super+0x2f/0x150
kill_block_super+0x11/0x40
kill_f2fs_super+0x7d/0x140
deactivate_locked_super+0x2a/0x70
cleanup_mnt+0xb3/0x140
task_work_run+0x61/0x90
The root cause is: creating large files during disable checkpoint
period results in not enough free segments, so when writing back root
inode will failed in f2fs_enable_checkpoint. When umount the file
system after enabling checkpoint, the root inode is dirty in
f2fs_evict_inode function, which triggers BUG_ON. The steps to
reproduce are as follows:
dd if=/dev/zero of=f2fs.img bs=1M count=55
mount f2fs.img f2fs_dir -o checkpoint=disable:10%
dd if=/dev/zero of=big bs=1M count=50
sync
rm big
mount -o remount,checkpoint=enable f2fs_dir
umount f2fs_dir
Let's redirty inode when there is not free segments during checkpoint
is disable. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: hisi_sas: Add cond_resched() for no forced preemption model
For no forced preemption model kernel, in the scenario where the
expander is connected to 12 high performance SAS SSDs, the following
call trace may occur:
[ 214.409199][ C240] watchdog: BUG: soft lockup - CPU#240 stuck for 22s! [irq/149-hisi_sa:3211]
[ 214.568533][ C240] pstate: 60400009 (nZCv daif +PAN -UAO -TCO BTYPE=--)
[ 214.575224][ C240] pc : fput_many+0x8c/0xdc
[ 214.579480][ C240] lr : fput+0x1c/0xf0
[ 214.583302][ C240] sp : ffff80002de2b900
[ 214.587298][ C240] x29: ffff80002de2b900 x28: ffff1082aa412000
[ 214.593291][ C240] x27: ffff3062a0348c08 x26: ffff80003a9f6000
[ 214.599284][ C240] x25: ffff1062bbac5c40 x24: 0000000000001000
[ 214.605277][ C240] x23: 000000000000000a x22: 0000000000000001
[ 214.611270][ C240] x21: 0000000000001000 x20: 0000000000000000
[ 214.617262][ C240] x19: ffff3062a41ae580 x18: 0000000000010000
[ 214.623255][ C240] x17: 0000000000000001 x16: ffffdb3a6efe5fc0
[ 214.629248][ C240] x15: ffffffffffffffff x14: 0000000003ffffff
[ 214.635241][ C240] x13: 000000000000ffff x12: 000000000000029c
[ 214.641234][ C240] x11: 0000000000000006 x10: ffff80003a9f7fd0
[ 214.647226][ C240] x9 : ffffdb3a6f0482fc x8 : 0000000000000001
[ 214.653219][ C240] x7 : 0000000000000002 x6 : 0000000000000080
[ 214.659212][ C240] x5 : ffff55480ee9b000 x4 : fffffde7f94c6554
[ 214.665205][ C240] x3 : 0000000000000002 x2 : 0000000000000020
[ 214.671198][ C240] x1 : 0000000000000021 x0 : ffff3062a41ae5b8
[ 214.677191][ C240] Call trace:
[ 214.680320][ C240] fput_many+0x8c/0xdc
[ 214.684230][ C240] fput+0x1c/0xf0
[ 214.687707][ C240] aio_complete_rw+0xd8/0x1fc
[ 214.692225][ C240] blkdev_bio_end_io+0x98/0x140
[ 214.696917][ C240] bio_endio+0x160/0x1bc
[ 214.701001][ C240] blk_update_request+0x1c8/0x3bc
[ 214.705867][ C240] scsi_end_request+0x3c/0x1f0
[ 214.710471][ C240] scsi_io_completion+0x7c/0x1a0
[ 214.715249][ C240] scsi_finish_command+0x104/0x140
[ 214.720200][ C240] scsi_softirq_done+0x90/0x180
[ 214.724892][ C240] blk_mq_complete_request+0x5c/0x70
[ 214.730016][ C240] scsi_mq_done+0x48/0xac
[ 214.734194][ C240] sas_scsi_task_done+0xbc/0x16c [libsas]
[ 214.739758][ C240] slot_complete_v3_hw+0x260/0x760 [hisi_sas_v3_hw]
[ 214.746185][ C240] cq_thread_v3_hw+0xbc/0x190 [hisi_sas_v3_hw]
[ 214.752179][ C240] irq_thread_fn+0x34/0xa4
[ 214.756435][ C240] irq_thread+0xc4/0x130
[ 214.760520][ C240] kthread+0x108/0x13c
[ 214.764430][ C240] ret_from_fork+0x10/0x18
This is because in the hisi_sas driver, both the hardware interrupt
handler and the interrupt thread are executed on the same CPU. In the
performance test scenario, function irq_wait_for_interrupt() will always
return 0 if lots of interrupts occurs and the CPU will be continuously
consumed. As a result, the CPU cannot run the watchdog thread. When the
watchdog time exceeds the specified time, call trace occurs.
To fix it, add cond_resched() to execute the watchdog thread. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Check pipe offset before setting vblank
pipe_ctx has a size of MAX_PIPES so checking its index before accessing
the array.
This fixes an OVERRUN issue reported by Coverity. |
| In the Linux kernel, the following vulnerability has been resolved:
net: txgbe: free isb resources at the right time
When using MSI/INTx interrupt, the shared interrupts are still being
handled in the device remove routine, before free IRQs. So isb memory
is still read after it is freed. Thus move wx_free_isb_resources()
from txgbe_close() to txgbe_remove(). And fix the improper isb free
action in txgbe_open() error handling path. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ntb_netdev: Move ntb_netdev_rx_handler() to call netif_rx() from __netif_rx()
The following is emitted when using idxd (DSA) dmanegine as the data
mover for ntb_transport that ntb_netdev uses.
[74412.546922] BUG: using smp_processor_id() in preemptible [00000000] code: irq/52-idxd-por/14526
[74412.556784] caller is netif_rx_internal+0x42/0x130
[74412.562282] CPU: 6 PID: 14526 Comm: irq/52-idxd-por Not tainted 6.9.5 #5
[74412.569870] Hardware name: Intel Corporation ArcherCity/ArcherCity, BIOS EGSDCRB1.E9I.1752.P05.2402080856 02/08/2024
[74412.581699] Call Trace:
[74412.584514] <TASK>
[74412.586933] dump_stack_lvl+0x55/0x70
[74412.591129] check_preemption_disabled+0xc8/0xf0
[74412.596374] netif_rx_internal+0x42/0x130
[74412.600957] __netif_rx+0x20/0xd0
[74412.604743] ntb_netdev_rx_handler+0x66/0x150 [ntb_netdev]
[74412.610985] ntb_complete_rxc+0xed/0x140 [ntb_transport]
[74412.617010] ntb_rx_copy_callback+0x53/0x80 [ntb_transport]
[74412.623332] idxd_dma_complete_txd+0xe3/0x160 [idxd]
[74412.628963] idxd_wq_thread+0x1a6/0x2b0 [idxd]
[74412.634046] irq_thread_fn+0x21/0x60
[74412.638134] ? irq_thread+0xa8/0x290
[74412.642218] irq_thread+0x1a0/0x290
[74412.646212] ? __pfx_irq_thread_fn+0x10/0x10
[74412.651071] ? __pfx_irq_thread_dtor+0x10/0x10
[74412.656117] ? __pfx_irq_thread+0x10/0x10
[74412.660686] kthread+0x100/0x130
[74412.664384] ? __pfx_kthread+0x10/0x10
[74412.668639] ret_from_fork+0x31/0x50
[74412.672716] ? __pfx_kthread+0x10/0x10
[74412.676978] ret_from_fork_asm+0x1a/0x30
[74412.681457] </TASK>
The cause is due to the idxd driver interrupt completion handler uses
threaded interrupt and the threaded handler is not hard or soft interrupt
context. However __netif_rx() can only be called from interrupt context.
Change the call to netif_rx() in order to allow completion via normal
context for dmaengine drivers that utilize threaded irq handling.
While the following commit changed from netif_rx() to __netif_rx(),
baebdf48c360 ("net: dev: Makes sure netif_rx() can be invoked in any context."),
the change should've been a noop instead. However, the code precedes this
fix should've been using netif_rx_ni() or netif_rx_any_context(). |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ecdh - explicitly zeroize private_key
private_key is overwritten with the key parameter passed in by the
caller (if present), or alternatively a newly generated private key.
However, it is possible that the caller provides a key (or the newly
generated key) which is shorter than the previous key. In that
scenario, some key material from the previous key would not be
overwritten. The easiest solution is to explicitly zeroize the entire
private_key array first.
Note that this patch slightly changes the behavior of this function:
previously, if the ecc_gen_privkey failed, the old private_key would
remain. Now, the private_key is always zeroized. This behavior is
consistent with the case where params.key is set and ecc_is_key_valid
fails. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: 8250_omap: Implementation of Errata i2310
As per Errata i2310[0], Erroneous timeout can be triggered,
if this Erroneous interrupt is not cleared then it may leads
to storm of interrupts, therefore apply Errata i2310 solution.
[0] https://www.ti.com/lit/pdf/sprz536 page 23 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Check pat.ops before dumping PAT settings
We may leave pat.ops unset when running on brand new platform or
when running as a VF. While the former is unlikely, the latter
is valid (future) use case and will cause NPD when someone will
try to dump PAT settings by debugfs.
It's better to check pointer to pat.ops instead of specific .dump
hook, as we have this hook always defined for every .ops variant. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panel: ilitek-ili9881c: Fix warning with GPIO controllers that sleep
The ilitek-ili9881c controls the reset GPIO using the non-sleeping
gpiod_set_value() function. This complains loudly when the GPIO
controller needs to sleep. As the caller can sleep, use
gpiod_set_value_cansleep() to fix the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
ftruncate: pass a signed offset
The old ftruncate() syscall, using the 32-bit off_t misses a sign
extension when called in compat mode on 64-bit architectures. As a
result, passing a negative length accidentally succeeds in truncating
to file size between 2GiB and 4GiB.
Changing the type of the compat syscall to the signed compat_off_t
changes the behavior so it instead returns -EINVAL.
The native entry point, the truncate() syscall and the corresponding
loff_t based variants are all correct already and do not suffer
from this mistake. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: emux: improve patch ioctl data validation
In load_data(), make the validation of and skipping over the main info
block match that in load_guspatch().
In load_guspatch(), add checking that the specified patch length matches
the actually supplied data, like load_data() already did. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: core: Fix duplicate endpoint bug by clearing reserved bits in the descriptor
Syzbot has identified a bug in usbcore (see the Closes: tag below)
caused by our assumption that the reserved bits in an endpoint
descriptor's bEndpointAddress field will always be 0. As a result of
the bug, the endpoint_is_duplicate() routine in config.c (and possibly
other routines as well) may believe that two descriptors are for
distinct endpoints, even though they have the same direction and
endpoint number. This can lead to confusion, including the bug
identified by syzbot (two descriptors with matching endpoint numbers
and directions, where one was interrupt and the other was bulk).
To fix the bug, we will clear the reserved bits in bEndpointAddress
when we parse the descriptor. (Note that both the USB-2.0 and USB-3.1
specs say these bits are "Reserved, reset to zero".) This requires us
to make a copy of the descriptor earlier in usb_parse_endpoint() and
use the copy instead of the original when checking for duplicates. |
| In the Linux kernel, the following vulnerability has been resolved:
Fix userfaultfd_api to return EINVAL as expected
Currently if we request a feature that is not set in the Kernel config we
fail silently and return all the available features. However, the man
page indicates we should return an EINVAL.
We need to fix this issue since we can end up with a Kernel warning should
a program request the feature UFFD_FEATURE_WP_UNPOPULATED on a kernel with
the config not set with this feature.
[ 200.812896] WARNING: CPU: 91 PID: 13634 at mm/memory.c:1660 zap_pte_range+0x43d/0x660
[ 200.820738] Modules linked in:
[ 200.869387] CPU: 91 PID: 13634 Comm: userfaultfd Kdump: loaded Not tainted 6.9.0-rc5+ #8
[ 200.877477] Hardware name: Dell Inc. PowerEdge R6525/0N7YGH, BIOS 2.7.3 03/30/2022
[ 200.885052] RIP: 0010:zap_pte_range+0x43d/0x660 |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix kernel bug on rename operation of broken directory
Syzbot reported that in rename directory operation on broken directory on
nilfs2, __block_write_begin_int() called to prepare block write may fail
BUG_ON check for access exceeding the folio/page size.
This is because nilfs_dotdot(), which gets parent directory reference
entry ("..") of the directory to be moved or renamed, does not check
consistency enough, and may return location exceeding folio/page size for
broken directories.
Fix this issue by checking required directory entries ("." and "..") in
the first chunk of the directory in nilfs_dotdot(). |
