| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| DOMPurify before 3.3.2 contains a prototype pollution vulnerability in USE_PROFILES mode that allows attackers to bypass attribute filtering by polluting Array.prototype properties. Attackers can set Array.prototype properties like onclick to true, causing DOMPurify to accept event handlers as allowlisted attributes and resulting in DOM-based XSS when sanitized markup is rendered. |
| Pillow is a Python imaging library. From 8.2.0 through 12.2.0, src/libImaging/Jpeg2KDecode.c accumulates total_component_width across every tile in a JPEG2000 image instead of recomputing it per tile, allowing a crafted tiled JPEG2000 file to force substantially higher transient memory usage and trigger out-of-memory failures during decoding. This issue is fixed in version 12.3.0. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: fix dst corruption in same register operation
For lshift and rshift, the shift operations are performed in a loop over
32-bit words. The loop calculates the shifted value and write it to dst,
and then immediately reads from src to calculate the carry for the next
iteration. Because src and dst could point to the same memory location,
the carry is incorrectly calculated using the newly modified dst value
instead of the original src value.
Adding a temporary local variable to cache the original value before
writing to dst and using it for the carry calculation solves the
problem. In addition, partial overlap is rejected from control plane for
all kind of operations including byteorder. This was tested with the
following bytecode:
table test_table ip flags 0 use 1 handle 1
ip test_table test_chain use 3 type filter hook input prio 0 policy accept packets 0 bytes 0 flags 1
ip test_table test_chain 2
[ immediate reg 1 0x44332211 0x88776655 ]
[ bitwise reg 1 = ( reg 1 << 0x08000000 ) ]
[ cmp eq reg 1 0x66443322 0x00887766 ]
[ counter pkts 0 bytes 0 ]
ip test_table test_chain 4 3
[ immediate reg 1 0x44332211 0x88776655 ]
[ bitwise reg 1 = ( reg 1 << 0x08000000 ) ]
[ cmp eq reg 1 0x55443322 0x00887766 ]
[ counter pkts 21794 bytes 1917798 ] |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: safe_serial: fix memory corruption with small endpoint
Make sure that the bulk-out buffer size is at least eight bytes to avoid
user-controlled slab corruption in "safe" mode should a malicious device
report a smaller size. |
| In the Linux kernel, the following vulnerability has been resolved:
uio: uio_pci_generic_sva: fix double free of devm_kzalloc() memory
uio_pci_sva allocates struct uio_pci_sva_dev with devm_kzalloc() in
probe(), but then calls kfree(udev) both on the probe() error path
(label out_free) and again in remove().
Because devm_kzalloc() allocations are devres-managed and are freed
automatically when the device is detached (including after a failing
probe() and during driver unbind), the explicit kfree() can lead to a
double free.
If probe() fails after devm_kzalloc(), the error path frees udev and
devres cleanup will free it again when the core unwinds the partially
bound device. On normal driver removal, remove() frees udev and devres
will free it again when the device is detached.
This issue was identified by a static analysis tool I developed and
confirmed by manual review. Fix by removing the manual kfree() calls
and dropping the now-unused label. |
| FreeScout is a free help desk and shared inbox built with PHP's Laravel framework. A Prototype Pollution condition in the `getQueryParam` function `/public/js/main.js` and was addressed in version 1.8.139 by blocking URL query keys matching the pattern `__proto__`. However, this mitigation is incomplete: it only filters top-level `__proto__` keys and fails to sanitize nested forms such as `b[__proto__][polluted]=PWNED`. As a result, an attacker-controlled URL query string can still write into `Object.prototype` on any page that loads `main.js`. Version 1.8.223 contains a updated fix. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Ignore Port I/O requests of length '0'
Explicitly ignore Port I/O requests of length '0' (or count '0'), so that
setting up the software scratch area (and other code) doesn't have to
worry about underflowing the length, and to allow for WARNing on trying
to configure the scratch area with len==0. |
| Grav before 2.0.4 contains a regular expression denial of service (ReDoS) vulnerability in the regex_replace filter and function, which are allowlisted in the Twig content sandbox. When Twig processing in page content is enabled (security.twig_content.process_enabled: true, disabled by default), an authenticated page editor can supply a catastrophically backtracking PCRE pattern that is passed directly to PHP's preg_replace(), causing unbounded CPU consumption and denial of service to the web server process. |
| Feathersjs is a framework for creating web APIs and real-time applications with TypeScript or JavaScript. In 5.0.44 and earlier, the _.merge(target, source) utility exported by @feathersjs/commons recursively merges source into target by iterating Object.keys(source). When source was produced by JSON.parse and contains a __proto__, constructor, or prototype key, that key is returned as an own-enumerable property; the recursive merge then resolves target['__proto__'] to Object.prototype and writes attacker-supplied properties onto it, polluting the prototype for all plain objects in the process for the lifetime of the Node process. This issue is fixed in version 5.0.45. |
| A vulnerability was found in RobinHerbots Inputmask up to 5.0.9. Affected by this issue is the function extendDefaults/extendDefinitions/extendAliases in the library lib/dependencyLibs/extend.js of the component Internal Deep Merge Helper. The manipulation results in improperly controlled modification of object prototype attributes. The attack may be performed from remote. The project was informed of the problem early through an issue report but has not responded yet. |
| joserfc is a Python library that provides an implementation of several JSON Object Signing and Encryption (JOSE) standards. Prior to 1.6.8, joserfc.jwt.decode accepts attacker-forged HMAC-signed tokens when the caller-supplied verification key is the empty string or None, because HMACAlgorithm.sign and HMACAlgorithm.verify in src/joserfc/_rfc7518/jws_algs.py pass the output of OctKey.get_op_key(...) to hmac.new(...) and OctKey.import_key in src/joserfc/_rfc7518/oct_key.py only emits a SecurityWarning for keys shorter than 14 bytes without rejecting zero-length input. This issue is fixed in version 1.6.8. |
| A vulnerability has been found in CartoDB carto-api-client 0.5.29. This impacts the function addFilter of the file src/filters.ts. Such manipulation of the argument column leads to improperly controlled modification of object prototype attributes. The attack can be executed remotely. The project was informed of the problem early through an issue report but has not responded yet. |
| A heap buffer overflow vulnerability exists in the DTLS handshake fragment reassembly logic of GnuTLS. The issue arises in merge_handshake_packet() where incoming handshake fragments are matched and merged based solely on handshake type, without validating that the message_length field remains consistent across all fragments of the same logical message. An attacker can exploit this by sending crafted DTLS fragments with conflicting message_length values, causing the implementation to allocate a buffer based on a smaller initial fragment and subsequently write beyond its bounds using larger, inconsistent fragments. Because the merge operation does not enforce proper bounds checking against the allocated buffer size, this results in an out-of-bounds write on the heap. The vulnerability is remotely exploitable without authentication via the DTLS handshake path and can lead to application crashes or potential memory corruption. |
| In the Linux kernel, the following vulnerability has been resolved:
net: shaper: reject duplicate leaves in GROUP request
net_shaper_nl_group_doit() does not deduplicate NET_SHAPER_A_LEAVES
entries. When userspace supplies the same leaf handle twice, the same
old-parent pointer lands twice in old_nodes[]. The cleanup loop double
frees the parent. Of course the same parent may still be in old_nodes[]
twice if we are moving multiple of its leaves.
Note that this patch also implicitly fixes the fact that the
i >= leaves_count path forgets to set ret. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix warning when unbinding
If there is an error during some initialization related to firmware,
the buffers dp->tx_ring[i].tx_status are released.
However this is released again when the device is unbinded (ath11k_pci),
and we get:
WARNING: CPU: 0 PID: 6231 at mm/slub.c:4368 free_large_kmalloc+0x57/0x90
Call Trace:
free_large_kmalloc
ath11k_dp_free
ath11k_core_deinit
ath11k_pci_remove
...
The issue is always reproducible from a VM because the MSI addressing
initialization is failing.
In order to fix the issue, just set the buffers to NULL after releasing in
order to avoid the double free. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: account for fraggap on the paged allocation path
In __ip6_append_data(), when the paged-allocation branch is taken
(MSG_MORE / NETIF_F_SG / large fraglen), alloclen and pagedlen are
computed as
alloclen = fragheaderlen + transhdrlen;
pagedlen = datalen - transhdrlen;
datalen already includes fraggap (datalen = length + fraggap). When
fraggap is non-zero, this is not the first skb and transhdrlen is zero.
The fraggap bytes carried over from the previous skb are copied just past
the fragment headers in the new skb's linear area. The linear area is
therefore undersized by fraggap bytes while pagedlen is overstated by the
same amount, and the copy writes past skb->end into the trailing
skb_shared_info.
An unprivileged user can trigger this via a UDPv6 socket using
MSG_MORE together with MSG_SPLICE_PAGES.
The bad accounting was introduced by commit 773ba4fe9104 ("ipv6:
avoid partial copy for zc"). Before commit ce650a166335 ("udp6: Fix
__ip6_append_data()'s handling of MSG_SPLICE_PAGES"), the negative
copy value caused -EINVAL to be returned. That later commit allowed
MSG_SPLICE_PAGES to proceed in this case, making the corruption
triggerable.
The non-paged branch sets alloclen to fraglen, which already accounts
for fraggap because datalen does. Bring the paged branch in line by
adding fraggap to alloclen and subtracting it from pagedlen.
After this adjustment, copy no longer collapses to -fraggap on the
paged path, so remove the stale comment describing that old arithmetic.
Since a negative copy is no longer expected for a valid MSG_SPLICE_PAGES
case, remove the MSG_SPLICE_PAGES exception from the negative copy check. |
| YAML::Syck versions before 1.47 for Perl allow a use-after-free and double-free via an anchor node freed while still on the parser value stack.
In the bundled libsyck, when an anchor name is redefined or removed, syck_hdlr_add_anchor and syck_hdlr_remove_anchor free the node stored under that name with syck_free_node. That node can still be live on the parser's value stack, so syck_hdlr_add_node reaches it again and frees it a second time. On a normal build the 48-byte node chunk is freed twice and the interpreter aborts. Anchors need no special flags, so this is reached on the default Load path, and a 7-byte document that redefines an anchor triggers it.
Any caller that runs Load or LoadFile on an untrusted document that redefines an anchor mid-parse crashes the interpreter, a denial of service. |
| The MCP Python SDK, called mcp on PyPI, is a Python implementation of the Model Context Protocol (MCP). Prior to 1.28.1, the deprecated mcp.server.websocket.websocket_server transport accepted WebSocket handshakes without applying Host or Origin header validation, leaving no SDK-level way to restrict which origins could connect to applications that exposed that transport. This issue is fixed in version 1.28.1. |
| A security vulnerability has been detected in sagold json-schema-library 11.5.0/11.5.1. This impacts the function parsePropertyDependencies of the file src/keywords/propertyDependencies.ts. The manipulation leads to improperly controlled modification of object prototype attributes. The attack can be initiated remotely. Upgrading to version 11.6.0 will fix this issue. The identifier of the patch is 432287ee6f68a02ce6f015354618486ec427a32d. It is advisable to upgrade the affected component. |
| A vulnerability exists in NGINX Plus and NGINX Open Source when a map directive uses regex matching and a string expression references the map's regex capture variables before referencing the map output variable. Alternatively, the same result could be achieved by using a non-cacheable variable in a string expression under certain conditions. An unauthenticated attacker along with conditions beyond their control can exploit this vulnerability by sending crafted HTTP requests. This may cause a heap buffer overflow in the NGINX worker process leading to a restart. Additionally, attackers can execute code on systems with Address Space Layout Randomization (ASLR) disabled or when the attacker can bypass ASLR.
Impact:
This vulnerability may allow remote attackers to cause a denial-of-service (DoS) on the NGINX system or to possibly trigger a code execution. There is no control plane exposure; this is a data plane issue only.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
