| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/amd: Fix crash due to race between amd_pmu_enable_all, perf NMI and throttling
amd_pmu_enable_all() does:
if (!test_bit(idx, cpuc->active_mask))
continue;
amd_pmu_enable_event(cpuc->events[idx]);
A perf NMI of another event can come between these two steps. Perf NMI
handler internally disables and enables _all_ events, including the one
which nmi-intercepted amd_pmu_enable_all() was in process of enabling.
If that unintentionally enabled event has very low sampling period and
causes immediate successive NMI, causing the event to be throttled,
cpuc->events[idx] and cpuc->active_mask gets cleared by x86_pmu_stop().
This will result in amd_pmu_enable_event() getting called with event=NULL
when amd_pmu_enable_all() resumes after handling the NMIs. This causes a
kernel crash:
BUG: kernel NULL pointer dereference, address: 0000000000000198
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
[...]
Call Trace:
<TASK>
amd_pmu_enable_all+0x68/0xb0
ctx_resched+0xd9/0x150
event_function+0xb8/0x130
? hrtimer_start_range_ns+0x141/0x4a0
? perf_duration_warn+0x30/0x30
remote_function+0x4d/0x60
__flush_smp_call_function_queue+0xc4/0x500
flush_smp_call_function_queue+0x11d/0x1b0
do_idle+0x18f/0x2d0
cpu_startup_entry+0x19/0x20
start_secondary+0x121/0x160
secondary_startup_64_no_verify+0xe5/0xeb
</TASK>
amd_pmu_disable_all()/amd_pmu_enable_all() calls inside perf NMI handler
were recently added as part of BRS enablement but I'm not sure whether
we really need them. We can just disable BRS in the beginning and enable
it back while returning from NMI. This will solve the issue by not
enabling those events whose active_masks are set but are not yet enabled
in hw pmu. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: tcm_loop: Fix possible name leak in tcm_loop_setup_hba_bus()
If device_register() fails in tcm_loop_setup_hba_bus(), the name allocated
by dev_set_name() need be freed. As comment of device_register() says, it
should use put_device() to give up the reference in the error path. So fix
this by calling put_device(), then the name can be freed in kobject_cleanup().
The 'tl_hba' will be freed in tcm_loop_release_adapter(), so it don't need
goto error label in this case. |
| In the Linux kernel, the following vulnerability has been resolved:
kprobes: Skip clearing aggrprobe's post_handler in kprobe-on-ftrace case
In __unregister_kprobe_top(), if the currently unregistered probe has
post_handler but other child probes of the aggrprobe do not have
post_handler, the post_handler of the aggrprobe is cleared. If this is
a ftrace-based probe, there is a problem. In later calls to
disarm_kprobe(), we will use kprobe_ftrace_ops because post_handler is
NULL. But we're armed with kprobe_ipmodify_ops. This triggers a WARN in
__disarm_kprobe_ftrace() and may even cause use-after-free:
Failed to disarm kprobe-ftrace at kernel_clone+0x0/0x3c0 (error -2)
WARNING: CPU: 5 PID: 137 at kernel/kprobes.c:1135 __disarm_kprobe_ftrace.isra.21+0xcf/0xe0
Modules linked in: testKprobe_007(-)
CPU: 5 PID: 137 Comm: rmmod Not tainted 6.1.0-rc4-dirty #18
[...]
Call Trace:
<TASK>
__disable_kprobe+0xcd/0xe0
__unregister_kprobe_top+0x12/0x150
? mutex_lock+0xe/0x30
unregister_kprobes.part.23+0x31/0xa0
unregister_kprobe+0x32/0x40
__x64_sys_delete_module+0x15e/0x260
? do_user_addr_fault+0x2cd/0x6b0
do_syscall_64+0x3a/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
[...]
For the kprobe-on-ftrace case, we keep the post_handler setting to
identify this aggrprobe armed with kprobe_ipmodify_ops. This way we
can disarm it correctly. |
| The LC Wizard plugin for WordPress is vulnerable to Privilege Escalation due to a missing capability check in the ghl-wizard/inc/wp_user.php file in versions 1.2.10 to 1.3.0. This makes it possible for unauthenticated attackers to create new user accounts with the administrator role when the PRO functionality is enabled. |
| FreePBX Endpoint Manager is a module for managing telephony endpoints in FreePBX systems. In versions 17.0.2.36 and above before 17.0.3, the filestore module within the Administrative interface is vulnerable to a post-authentication command injection by an authenticated known user via the testconnection -> check_ssh_connect() function. An attacker can leverage this vulnerability to obtain remote access to the system as an asterisk user. This issue is fixed in version 17.0.3. |
| containerd is an open-source container runtime. Versions 1.7.28 and below, 2.0.0-beta.0 through 2.0.6, 2.1.0-beta.0 through 2.1.4, and 2.2.0-beta.0 through 2.2.0-rc.1 contain a bug in the CRI Attach implementation where a user can exhaust memory on the host due to goroutine leaks. This issue is fixed in versions 1.7.29, 2.0.7, 2.1.5 and 2.2.0. To workaround this vulnerability, users can set up an admission controller to control accesses to pods/attach resources. |
| ClipBucket V5 provides open source video hosting with PHP. In version5.5.2 - #140 and earlier, a Blind SQL injection vulnerability exists in the Admin Area’s “/admin_area/login_as_user.php” file. Exploiting this vulnerability requires access privileges to the Admin Area. |
| The Gravity Forms plugin for WordPress is vulnerable to arbitrary file uploads due to missing file type validation in the copy_post_image() function in all versions up to, and including, 2.9.20. This makes it possible for unauthenticated attackers to upload arbitrary files on the affected site's server which may make remote code execution possible. This only impacts sites that have allow_url_fopen set to `On`, the post creation form enabled along with a file upload field for the post |
| ClipBucket v5 is an open source video sharing platform. In versions 5.5.2-#146 and below, the Manage Photos feature is vulnerable to stored Cross-site Scripting (XSS). An authenticated regular user can upload a photo with a malicious Photo Title containing HTML/JavaScript code. While the payload does not execute in the user-facing photo gallery or detail pages, it is rendered unsafely in the Admin → Manage Photos section, resulting in JavaScript execution in the administrator’s browser. This issue is fixed in version 5.5.2-#147. |
| ClipBucket v5 is an open source video sharing platform. In versions 5.5.2-#146 and below, the Manage Playlists feature is vulnerable to stored Cross-site Scripting (XSS),specifically in the Playlist Name field. An authenticated low-privileged user can create a playlist with a malicious name containing HTML/JavaScript code, which is rendered unescaped on playlist detail and listing pages. This results in arbitrary JavaScript execution in every viewer’s browser, including administrators. This issue is fixed in version 5.5.2-#147. |
| ClipBucket is a web-based video-sharing platform. In ClipBucket version 5.5.2 - #146 and earlier, the /admin_area/template_editor.php endpoint is vulnerable to path traversal. The validation of the file-loading path is inadequate, allowing authenticated administrators to read and write arbitrary files outside the intended template directory by inserting path traversal sequences into the folder parameter. An attacker with administrator privileges can exploit this vulnerability to read sensitive files such as /etc/passwd and modify writable files on the system, potentially leading to sensitive information disclosure and compromise of the application or server. This issue is fixed in version 5.5.2 - #147. |
| (conda) Constructor is a tool that enables users to create installers for conda package collections. In versions 3.12.2 and below, the installation directory inherits permissions from its parent directory. Outside of restricted directories, the permissions are very permissive and often allow write access by authenticated users. Any logged in user can make modifications during the installation for both single-user and all-user installations. This constitutes a local attack vector if the installation is in a directory local users have access to. For single-user installations in a shared directory, these permissions persist after the installation. This issue is fixed in version 3.13.0. |
| ClipBucket v5 is an open source video sharing platform. ClipBucket v5 through build 5.5.2 #145 allows stored cross-site scripting (XSS) in multiple video and photo metadata fields. For videos the Tags field and the Genre, Actors, Producer, Executive Producer, and Director fields in Movieinfos accept user supplied values without adequate sanitization. For photos the Photo Title and Photo Tags fields accept user supplied values without adequate sanitization. A regular user who can edit a video or photo can inject script (for example by supplying a value such as a closing delimiter followed by a script element). The injected script executes when any user, including an unauthenticated visitor or an administrator, views the affected video or photo page. Although cookies are set with the HttpOnly attribute and cannot be read directly, the injected script can issue fetch requests to endpoints such as admin_area pages and exfiltrate their contents or trigger unintended actions. Version 5.5.2 build #146 and later contain a fix. Update to build 5.5.2 #146 or later. No known workarounds exist. |
| A DOM-based Cross-Site Scripting (XSS) vulnerability exists in the text editor feature of the Onlook web application 0.2.32. This vulnerability occurs because user-supplied input is not properly sanitized before being directly injected into the DOM via innerHTML when editing a text element. An attacker can exploit this to inject malicious HTML and script code, which is then executed within the context of the preview iframe, allowing for the execution of arbitrary scripts in the user's session. |
| An Open Redirect vulnerability exists in the OAuth callback handler in file onlook/apps/web/client/src/app/auth/callback/route.ts in Onlook web application 0.2.32. The vulnerability occurs because the application trusts the X-Forwarded-Host header value without proper validation when constructing a redirect URL. A remote attacker can send a manipulated X-Forwarded-Host header to redirect an authenticated user to an arbitrary external website under their control, which can be exploited for phishing attacks. |
| AstrBot Project v3.5.22 contains a directory traversal vulnerability. The handler function install_plugin_upload of the interface '/plugin/install-upload' parses the filename from the request body provided by the user, and directly uses the filename to assign to file_path without checking the validity of the filename. The variable file_path is then passed as a parameter to the function `file.save`, so that the file in the request body can be saved to any location in the file system through directory traversal. |
| Strapi through 4.5.5 allows attackers (with access to the admin panel) to discover sensitive user details by exploiting the query filter. The attacker can filter users by columns that contain sensitive information and infer a value from API responses. If the attacker has super admin access, then this can be exploited to discover the password hash and password reset token of all users. If the attacker has admin panel access to an account with permission to access the username and email of API users with a lower privileged role (e.g., Editor or Author), then this can be exploited to discover sensitive information for all API users but not other admin accounts. |
| Strapi through 4.5.5 does not verify the access or ID tokens issued during the OAuth flow when the AWS Cognito login provider is used for authentication. A remote attacker could forge an ID token that is signed using the 'None' type algorithm to bypass authentication and impersonate any user that use AWS Cognito for authentication. |
| Strapi through 4.5.5 allows authenticated Server-Side Template Injection (SSTI) that can be exploited to execute arbitrary code on the server. A remote attacker with access to the Strapi admin panel can inject a crafted payload that executes code on the server into an email template that bypasses the validation checks that should prevent code execution. |
| Incorrect Content-Type header in one of the APIs (`text/html` instead of `application/json`) replies may potentially allow injection of HTML/JavaScript into reply.This issue affects BLU-IC2: through 1.19.5; BLU-IC4: through 1.19.5. |
