Search vulnerabilities

Results 430,681

CVE-2026-129292

PHP-FPM status endpoint XSS via unescaped user and script fields

PHP-FPM status endpoint XSS via unescaped user and script fields. The PHP-FPM full status output includes the request method, authentication user and script filename of each worker without escaping them for the HTML, XML or JSON format. When the status endpoint is enabled, an unauthenticated remote attacker can store markup in a worker's scoreboard entry with an ordinary request, for example through the username of an HTTP Basic authentication header that the web server forwards to PHP-FPM, or through the script filename where the attacker can influence it. When a user views the full status page as HTML, the injected JavaScript runs in the origin of that page. The attacker does not need access to the status endpoint. Malformed XML or JSON output can also disrupt monitoring tools. This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13.

CVSS 4.0 · 5.3 Medium EPSS 1.1% KEV · Not listed
Vendors
Products
CVE-2026-99466

media: microchip-csi2dc: fix async notifier leak on probe error path

In the Linux kernel, the following vulnerability has been resolved: media: microchip-csi2dc: fix async notifier leak on probe error path csi2dc_of_parse() ends up calling csi2dc_prepare_notifier(), which registers the V4L2 async notifier with v4l2_async_nf_register(). The probe error label csi2dc_probe_cleanup_notifier is reached after csi2dc_of_parse() has already succeeded (e.g. when media entity init, csi2dc_power() or v4l2_async_register_subdev() fail), but it calls only v4l2_async_nf_cleanup() and never v4l2_async_nf_unregister(). The notifier therefore stays chained in the global notifier_list while the enclosing struct csi2dc_device is freed, leading to list corruption and a use-after-free when the list is next walked. Unregister the notifier before cleaning it up on the error path, matching the teardown already done in csi2dc_remove().

CVSS 3.1 · 4.1 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99467

media: marvell: mcam: stop DMA and cancel s_bh_work before freeing DMA buffers

In the Linux kernel, the following vulnerability has been resolved: media: marvell: mcam: stop DMA and cancel s_bh_work before freeing DMA buffers In vmalloc mode the frame-completion IRQ queues mcam_frame_work() on cam->s_bh_work, which memcpy()s from the dma_bufs[] that mcam_free_dma_bufs() frees with dma_free_coherent(). mccic_shutdown() frees those buffers without stopping the controller, so while streaming a late frame IRQ can re-arm the work after the buffers are gone, causing a use-after-free. Stop the controller in mccic_shutdown() when streaming is still active (gated on an open fd, which holds a runtime-PM reference, so the device is powered), cancel s_bh_work in mcam_free_dma_bufs(), and move INIT_WORK() into mccic_register() before the device can be published.

CVSS 3.1 · 4.7 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-129506

SOAP use-after-free when processing DTD entity references

SOAP use-after-free when processing DTD entity references. The SOAP extension frees the document type definition (DTD) of a parsed XML document while attribute values can still refer to entities it owns, and can then read freed memory. Removing the DTD also bypasses the SOAP server's rejection of documents that contain one. An unauthenticated remote attacker who can send a crafted request to a SOAP endpoint, or who controls a WSDL or schema document loaded by the application, can crash the PHP process and cause denial of service. Memory disclosure and code execution have not been confirmed. This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13.

CVSS 4.0 · 6.3 Medium EPSS 1.9% KEV · Not listed
Vendors
Products
CVE-2026-129538

PHP-CGI out-of-bounds read and write during PATH_INFO correction

PHP-CGI out-of-bounds read and write during PATH_INFO correction. The PHP CGI binary (php-cgi), in CGI and FastCGI mode with cgi.fix_pathinfo enabled (the default), can perform an out-of-bounds read and write when the path removed from SCRIPT_FILENAME or PATH_TRANSLATED is longer than the supplied PATH_INFO, or when PATH_INFO is empty. This requires a web server mapping that passes such inconsistent values, or a FastCGI listener reachable by untrusted clients. An unauthenticated remote attacker can crash the process, may obtain process memory if the application exposes PATH_INFO or PATH_TRANSLATED, and may corrupt memory. PHP-FPM and the Apache module are not affected. This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13.

CVSS 4.0 · 6.9 Medium EPSS 12.8% KEV · Not listed
Vendors
Products
CVE-2026-99469

media: gspca: use vb2_video_unregister_device() on disconnect

In the Linux kernel, the following vulnerability has been resolved: media: gspca: use vb2_video_unregister_device() on disconnect gspca uses vb2_fop_release(), but gspca_disconnect() only unregisters the video device. If the queue owner closes the device after USB disconnect, vb2_fop_release() releases the queue and invokes gspca_stop_streaming() at that point. gspca_stream_off() calls subdriver stop callbacks and usb_set_interface() through gspca_dev->dev. By the time the late close runs, the USB core can have freed the usb_device, resulting in a use-after-free. This was observed as a KASAN use-after-free in sd_stopN(). Use vb2_video_unregister_device() so the queue is released and streaming is stopped synchronously during disconnect, while the usb_device is still valid. Since the helper takes the queue lock, which is usb_lock, call it after dropping that lock.

CVSS 3.1 · 4.7 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-128090

PHAR OpenSSL signature bypass via algorithm downgrade

PHAR OpenSSL signature bypass via algorithm downgrade. The Phar extension selects the signature verification method from the signature type stored in the archive, and only the OpenSSL types consult the separate .pubkey file holding the trusted public key. An attacker who can modify an OpenSSL-signed Phar archive, but not its public key file, can switch the signature type to a keyless hash such as SHA-256 with a recomputed digest, so the altered archive passes verification even with phar.require_hash enabled. An application that loads the archive may then execute attacker-controlled PHP code. Native, tar-based and zip-based phars are affected. This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13.

CVSS 4.0 · 7.7 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99470

media: cx23885: unregister DVB bus when SP2 CI setup fails

In the Linux kernel, the following vulnerability has been resolved: media: cx23885: unregister DVB bus when SP2 CI setup fails The DVBSKY S950C, DVBSKY T980C and TechnoTrend CT2-4500 CI paths register the DVB bus before attaching their SP2 CI client. If that client cannot be created, bound, or pinned, the current error path removes the I2C frontend components and only deallocates the frontend list, leaving the registered DVB adapter behind. Removing an I2C demod before unregistering the DVB bus can also expose the use-after-free ordering fixed for the normal remove path. Unregister the DVB bus immediately when SP2 CI setup fails, before the existing I2C client cleanup. The bus helper empties the frontend list, so the later frontend deallocation has nothing left to release. Keep failures from vb2_dvb_register_bus() on the existing cleanup path. Also release an unbound SP2 client and propagate the actual I2C creation or CI registration error. This issue was identified during our ongoing static-analysis research while reviewing kernel code.

CVSS 3.1 · 4.4 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99474

HID: hiddev: keep state alive through disconnect unlock

In the Linux kernel, the following vulnerability has been resolved: HID: hiddev: keep state alive through disconnect unlock mutex_unlock() clears the mutex owner before taking its wait lock. A thread spinning in the final hiddev file release can acquire existancelock after hiddev_disconnect() clears the owner, then free hiddev before the disconnecting thread reaches the mutex wait lock. This causes a use-after-free in the mutex slow unlock path. Give the connection and each open file an explicit reference. Drop each reference only after its existancelock critical section has completed, so neither unlock path can free the mutex while the other is still using it.

CVSS 3.1 · 4.7 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99475

genirq: Defer kfree(irqaction) until irq_thread_dtor() finishes

In the Linux kernel, the following vulnerability has been resolved: genirq: Defer kfree(irqaction) until irq_thread_dtor() finishes When an interrupt thread exits abnormally via do_exit() (e.g. the interrupt handler oopses) without returning from irq_thread(), a concurrent call to free_irq() could free the irqaction before the irq_thread_dtor() exit task work runs. irq thread (oopsed) free_irq() ------------------- ---------- do_exit() exit_mm() complete_vfork_done() -------> kthread_stop() returns exit_files() ... kfree(action) exit_task_work() irq_thread_dtor() action->... <- use-after-free Track the pending exit work with the IRQTF_EXIT_WORK thread flag, and have __free_irq() wait for the bit to clear before kfree(). irq_thread_dtor() only runs on irq_thread abnormal exit. If that dtor also faults, free_irq() will hang indefinitely, but double IRQ thread faults require a reboot anyways. [ tglx: Add missing include ]

CVSS 3.1 · 4.1 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99476

fsverity: Set S_VERITY only after rollback is no longer possible

In the Linux kernel, the following vulnerability has been resolved: fsverity: Set S_VERITY only after rollback is no longer possible Commit f77f281b6118 ("fsverity: use a hashtable to find the fsverity_info") changed the implementation of FS_IOC_ENABLE_VERITY to make concurrent reads start going through fsverity verification slightly earlier than they did before. Instead of it happening when enable_verity() calls fsverity_set_info(), it now happens when ->end_enable_verity() sets S_VERITY. However, ext4 and btrfs can roll back verity after they set S_VERITY, causing a use-after-free. Fix that by making ext4 and btrfs set S_VERITY only after rollback is no longer possible. On failure, don't roll back S_VERITY, but do roll back the filesystem-specific verity flag. Also update enable_verity() to handle any future instances of this bug more safely by warning and *not* freeing the fsverity_info. Finally, tweak some comments. Clarify one, and move information from another to its proper place in the comment for ->end_enable_verity().

CVSS 3.1 · 7 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99477

fs/proc/task_mmu: pin mm_users in do_pagemap_scan()

In the Linux kernel, the following vulnerability has been resolved: fs/proc/task_mmu: pin mm_users in do_pagemap_scan() The PAGEMAP_SCAN ioctl takes mmap_read_lock() on an mm obtained from /proc/<pid>/pagemap without holding a reference to mm_users. proc_mem_open() deliberately grabs only mm_count, so a consumer that touches the address space has to call mmget_not_zero() first. Every other consumer in this file does -- m_start(), do_procmap_query(), show_smaps_rollup() and pagemap_read() -- but do_pagemap_scan() does not. Without that reference the target can reach exit_mmap() concurrently, and exit_mmap() calls unmap_vmas() while holding mmap_lock only for reading, which does not exclude the scanner. For ordinary VMAs this is harmless, as free_pgtables() and remove_vma() run afterwards under mmap_write_lock. A shared hugetlb VMA is different: __hugetlb_zap_end() frees the VMA's hugetlb_vma_lock inside the read-locked phase. walk_hugetlb_range() can therefore load vma->vm_private_data, have the lock freed underneath it, and then down_read() a freed rw_semaphore. The load happens before the freeing side clears the pointer, so this is a use-after-free and not a NULL dereference. Any unprivileged user can reach it with no huge pages configured, as hugetlb_reserve_pages() allocates the lock before the VM_NORESERVE early return. Pin mm_users across the scan, the way the other consumers do. mmput() from the exiting task can then no longer reach exit_mmap() while a walk is in progress. [akpm@linux-foundation.org: remove unneeded & undesirable test for !mm]

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-128064

Mixed-case HTTPS and FTPS URLs can expose data in plaintext

Mixed-case HTTPS and FTPS URLs can expose data in plaintext. The HTTP and FTP stream wrappers recognise URL schemes case-insensitively, but enable TLS only when the scheme contains a lowercase "s" at a fixed position. A URL such as HTTPS:// or FTPS:// passed to file_get_contents(), fopen() or other stream functions, or received as an HTTP redirect target, is therefore handled over unencrypted HTTP or FTP. An attacker able to observe the network traffic can read data the application expected TLS to protect, including credentials, request bodies and transferred files. This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13.

CVSS 4.0 · 8.2 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99479

fbdev: atmel_lcdfb: Prevent FIFO work after removal

In the Linux kernel, the following vulnerability has been resolved: fbdev: atmel_lcdfb: Prevent FIFO work after removal The LCD controller IRQ schedules sinfo->task to recover from a FIFO underflow. Probe currently requests the IRQ before initializing the work, so an early interrupt can schedule an uninitialized work item. The probe error path and remove path cancel the work before freeing the IRQ. A FIFO-underflow interrupt can schedule the work again after that cancellation. framebuffer_release() may then free sinfo while the work is still pending. KASAN reported a use-after-free in atmel_lcdfb_task() when an underflow interrupt occurred during removal. With the IRQ freed before the work was cancelled, the same test completed without a kernel diagnostic. Initialize the work before requesting the IRQ. In both cleanup paths, free the IRQ before cancelling the work so that it cannot be scheduled again after cancellation.

CVSS 3.1 · 4.1 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99480

drm/panthor: Fix TOCTOU race between GROUP_REGISTERED check and erase

In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Fix TOCTOU race between GROUP_REGISTERED check and erase panthor_group_destroy() checks the GROUP_REGISTERED mark and then calls xa_erase() without holding the xarray lock across both. If the handle is destroyed by another thread in between, and a concurrent GROUP_CREATE reuses the freed ID, the first destroy erases and releases the new, still-initializing group, leading to a use-after-free in panthor_group_create(). Do the mark check and erase atomically under xa_lock().

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99481

Bluetooth: hci_vhci: Pin module for debugfs file operations

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_vhci: Pin module for debugfs file operations An open debugfs file retains its file_operations pointer in the debugfs proxy state. However, force_suspend_fops, force_wakeup_fops, aosp_capable_fops, and force_devcoredump_fops have no .owner set to THIS_MODULE. As a result, full_proxy_open_regular() calls fops_get() which succeeds without taking a reference to the hci_vhci module. When userspace opens any of these debugfs files and later closes the /dev/vhci file descriptor (triggering vhci_release() and debugfs file removal), the open debugfs file descriptor remains valid in userspace. Because the module refcount was not incremented, the hci_vhci module can be unloaded via delete_module (rmmod hci_vhci). When the userspace process subsequently closes the debugfs file descriptor, full_proxy_release() accesses the already unmapped file_operations structure, resulting in a kernel page fault / oops: BUG: unable to handle page fault for address: fffffbfff846f18b #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page Oops: Oops: 0000 [#1] SMP KASAN NOPTI RIP: 0010:full_proxy_release+0x8e/0x140 Call Trace: <TASK> __fput+0x39f/0xa60 fput_close_sync+0xff/0x200 __x64_sys_close+0x8c/0xf0 do_syscall_64+0xc3/0x590 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> Modules linked in: ... [last unloaded: hci_vhci(E)] The issue was discovered via manual code audit of drivers/bluetooth/hci_vhci.c and verified on a Linux 7.3-rc6 test VM with CONFIG_BT_VHCI=m by keeping a debugfs file open across controller teardown and module unload. Set .owner = THIS_MODULE on all four file_operations structures so that debugfs pins the module until all file descriptors are closed.

CVSS 3.1 · 4.4 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99482

ASoC: amd: ps: fix snd_acp63_remove() teardown ordering

In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: ps: fix snd_acp63_remove() teardown ordering The ACP IRQ handlers dereference the SoundWire, SoundWire DMA, and PDM child platform devices, but snd_acp63_remove() unregisters them while the interrupt is still held by devres, which frees it only after remove returns. An interrupt in this window is a use-after-free. Mask the ACP interrupt sources and call devm_free_irq() before the first child device is unregistered. The masking goes through the new acp_hw_ops->disable_interrupts callback, keeping the remove path platform-agnostic. The interrupt line is shared, and acp_hw_deinit() clears the sources only after the children are gone, which would leave the line raised with no handler left to ack it. The window predates the tagged refactor, which only reshaped the dereferences. devm_free_irq() waits for in-flight handlers, but not for work the hardirq has already queued: acp63_irq_handler() schedules amd_sdw_irq_thread on the SoundWire manager. Draining that work in the manager's remove path is a soundwire-side change and follows separately. This issue was found by an in-house static analysis tool.

CVSS 3.1 · 4.1 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99483

ALSA: pcmtest: handle multiple wraps in random capture fill

In the Linux kernel, the following vulnerability has been resolved: ALSA: pcmtest: handle multiple wraps in random capture fill The random capture helpers assume that the data generated for one timer tick wraps the DMA ring at most once. However, b_rw describes 200 ms of audio because the timer runs at 5 Hz, so it can be several times larger than a small ring. For 48 kHz, S16_LE, four-channel capture with a 512-frame buffer, the DMA ring is 4096 bytes while one tick generates 76800 bytes. After filling the 4096-byte tail, the existing code issues a second 72704-byte write from the ring base, writing 68608 bytes beyond the ring. Both interleaved and non-interleaved capture are affected. KASAN reports the first write into the adjacent free page as a use-after-free in the random-byte generator. The underlying defect is an out-of-bounds write from the live DMA ring, not a stale DMA allocation. Split each random write repeatedly at the interleaved ring or per-channel block boundary. Keep the hardware-pointer update exactly once after the complete logical write. The issue reproduced on three of three clean boots. With this change, the same vulnerable geometry completed six times without a sanitizer finding. Boundary, pattern-fill, no-timer, open/close, and module-reload controls also completed normally. snd-pcmtest is a test driver, and selecting random fill requires an administrator-controlled module parameter. The written values come from the kernel random generator; no privilege escalation or attacker-controlled write primitive was demonstrated.

CVSS 3.1 · 4.4 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99486

rust: configfs: fix data offset calculation for subsystem callbacks

In the Linux kernel, the following vulnerability has been resolved: rust: configfs: fix data offset calculation for subsystem callbacks `get_group_data()` chooses between `Group::<Parent>::container_of()` and `Subsystem::<Parent>::container_of()` based on whether `this` represents the root group of a configfs subsystem. It detects this by checking `(*this).cg_subsys.is_null()`, but `link_group()` in `fs/configfs/dir.c` unconditionally sets `cg_subsys` for every `config_group` attached anywhere in a registered subsystem, including the subsystem's own `su_group`. The only `config_group` with a NULL `cg_subsys` is the configfs root, on which userspace cannot trigger callbacks. The check is therefore always false at runtime, and the `Subsystem` branch is dead. Subsystem-level callbacks reach the `Group` branch and may read `data` at the wrong offset. Thus change the `is_root` check to correctly identify whether a group is a root group by comparing `this` to `subsys.su_group`. [ Andreas: Fix clippy warning on 1.85.0 by moving safety comment. ]

CVSS 3.1 · 6.1 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99487

rust: bug: pass TAINT_WARN to warn_slowpath_fmt() on UML

In the Linux kernel, the following vulnerability has been resolved: rust: bug: pass TAINT_WARN to warn_slowpath_fmt() on UML On UML, `warn_flags!` calls `warn_slowpath_fmt()` directly. Its third argument is a taint number, but `warn_on!` passes its bug flags there. As a result, `add_taint()` gets 2304 instead of 9 (`TAINT_WARN`). The warning is not recorded: `/proc/sys/kernel/tainted` stays 0 after `warn_on!` fires, where it should be 512. It also causes an out-of-bounds write in `add_taint()`. Pass `TAINT_WARN` directly, as C does on UML.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products