| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: always wait for ordered extents to avoid OE races
[BUG]
Syzbot reported a bug that there can be conflicting OEs for the same
range:
BTRFS critical (device loop4): panic in insert_ordered_extent:264: overlapping ordered extents, existing oe file_offset 16384 num_bytes 430080 flags 0x1089, new oe file_offset 16384 num_bytes 430080 flags 0x80 (errno=-17 Object alrea[ 179.162726][ T6897] BTRFS critical (device loop4): panic in insert_ordered_extent:264: overlapping ordered extents, existing oe file_offset 16384 num_bytes 430080 flags 0x1089, new oe file_offset 16384 num_bytes 430080 flags 0x80 (errno=-17 Object already exists)
------------[ cut here ]------------
kernel BUG at fs/btrfs/ordered-data.c:264!
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/09/2026
RIP: 0010:btrfs_alloc_ordered_extent+0x943/0xad0
Call Trace:
<TASK>
cow_file_range+0x744/0x12a0
fallback_to_cow+0x5ea/0xa00
run_delalloc_nocow+0x110c/0x17a0
btrfs_run_delalloc_range+0xbe4/0x1c20
writepage_delalloc+0x104d/0x1ba0
btrfs_writepages+0x1667/0x28b0
do_writepages+0x338/0x560
filemap_fdatawrite_range+0x1f2/0x300
btrfs_fdatawrite_range+0x54/0xf0
btrfs_direct_write+0x6a0/0xc30
btrfs_do_write_iter+0x329/0x790
do_iter_readv_writev+0x624/0x8d0
vfs_writev+0x34c/0x990
__se_sys_pwritev2+0x17a/0x2a0
do_syscall_64+0x174/0x580
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
---[ end trace 0000000000000000 ]---
[CAUSE]
Since commit ff66fe666233 ("btrfs: fix incorrect buffered IO fallback
for append direct writes"), if the direct IO finished short, we will
revert the isize back to the original one, so that append writes can be
respected during the buffered fallback.
Normally we rely on lock_and_cleanup_extent_if_need() function during
buffered writeback to wait for any existing ordered extents.
But that ordered extent waiting only happens if the start_pos is inside
the isize.
Since we have reverted the isize during failed direct IO, we will not
wait for any ordered extents.
This means we can have a race where the direct IO OE is still in the
tree, finished but not yet removed, then we're inserting the OE for the
buffered write, causing the above crash.
[FIX]
Make the OE wait to be unconditional, to handle the reverted isize
situation.
And since lock_and_cleanup_extent_if_need() now either lock the
extents or return -EAGAIN, also remove the branches that handles
no-extent-locked cases, and rename it to remove the "_if_need" suffix.
The following micro benchmark shows the runtime difference for
btrfs_buffered_write(), doing `xfs_io -f -c "pwrite 0 1m"` workload,
all values are the average runtime in nano seconds.
function runtime | before | after
-----------------------------------+-------------+---------------
lock_and_cleanup_extent_if_need() | 58.2 | 183.0
btrfs_buffered_write() | 2115.6 | 2973.3
The overall runtime of btrfs_buffered_write() is still pretty
tiny (still less than 3 micro seconds), I'd say the extra cost is still
acceptable.
An alternative to fix this problem is to wait ordered extents during
iomap_end() where the isize revert is done.
But that solution will break nowait requirement, as if a nowait direct
IO finished short, we have to wait for the OEs unconditionally or the
next append buffered IO can still hit the same problem.
So here we have to move the wait cost to buffered write, but at least
the code is slightly more streamline. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: virtio_bt: avoid OOB read of build info string
The virtbt_setup_zephyr() sends the Zephyr vendor command 0xfc08 (Read
Build Information) and hands the response to bt_dev_info() and
hci_set_fw_info() as a "%s" string starting at skb->data + 1, without
checking the length. A backend that answers with status only leaves that
pointer past the end of the received data, so the walk reads adjacent
slab memory until it meets a NUL. Those bytes reach the kernel log and
the firmware-info debugfs file.
To fix this, print the string with a bounded "%.*s" limited to
skb->len - 1. A short or unterminated response then prints as much as
arrived instead of failing setup.
This mirrors commit dd068ef04412 ("Bluetooth: bpa10x: avoid OOB read of
revision string in bpa10x_setup()"), which fixed the identical pattern. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix mmap_lock leak in irq_work path
stack_map_get_build_id_offset() introduced a per-CPU irq_work to defer
mmap_read_unlock() from NMI context, and bpf_find_vma() later reused the
same mmap_unlock_work. Both callers only check whether the work is busy
before taking mmap_lock, so a nested caller can reuse the slot before the
first caller queues it. Two read locks may then be acquired while only one
deferred unlock runs, leaking a read lock and blocking exit_mmap().
Reserve the per-CPU slot before mmap_read_trylock(). Use the same wrapper
in stackmap and bpf_find_vma() so both callers release the reservation on
trylock failure. Keep rejecting the slot while the irq_work remains busy.
Release it after the irq_work callback unlocks the mm. |
| In the Linux kernel, the following vulnerability has been resolved:
media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path
isp4sd_pwron_and_init() holds ops_mutex via guard(mutex) and, on any
init failure, jumps to err_deinit and calls isp4sd_pwroff_and_deinit().
That helper takes the same ops_mutex, re-acquiring a non-recursive mutex
already held by the current thread, so any init failure deadlocks.
Unwind the error path in stages instead, releasing only what each
failure point acquired. This also avoids the issues that an
unconditional teardown would hit at the earlier failures, such as a
runtime-PM underflow from pm_runtime_resume_and_get() and MMIO access
while the device is unpowered. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-pci: release descriptor pools on probe failure
The per-NUMA-node descriptor DMA pools are created lazily from
nvme_init_hctx_common() once the admin tag set is allocated, but they are
only destroyed in nvme_remove() via nvme_release_descriptor_pools(). Any
probe failure after the admin tag set has been allocated unwinds through
the out_disable label and nvme_pci_free_ctrl(), neither of which releases
the pools, leaking the dma_pool objects.
Release the descriptor pools in the out_disable error path. It must not
be added to nvme_pci_free_ctrl(), as that would double-free against
nvme_remove() on the normal teardown path. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: pn533: hold a reference to the request skb during send_frame
__pn533_send_async() publishes the command and then calls
dev->phy_ops->send_frame(). Once dev->cmd is set, an incoming frame
can be matched to this command: the I2C threaded IRQ runs
pn533_recv_frame(), which queues cmd_complete_work, and
pn533_send_async_complete() frees cmd->req with consume_skb().
On the I2C transport, pn533_i2c_send_frame() still dereferences the same
skb after i2c_master_send() returns, so a completion that races the
send can free the skb while the transport is still using it.
The request skb is owned by the command object and may be freed by
command completion at any time after dev->cmd is published, so the
transport send path must not assume it stays alive. Hold a temporary
reference to the request skb across the send_frame() call so the
transport always sees a live skb even if completion races the send.
Add a pn533_send_cmd_frame() helper and use it from all three send
paths. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: nci: fix use of uninitialized memory in CORE_INIT_RSP parsing
nci_core_init_rsp_packet_v1() and nci_core_init_rsp_packet_v2() parse
the CORE_INIT_RSP packet without validating that the skb contains
enough data. A malformed response (e.g. injected via virtual_ncidev)
can declare a large num_supported_rf_interfaces while providing
insufficient data, causing reads of uninitialized slab memory. This
is later used in nci_init_complete_req(), triggering a KMSAN
uninit-value warning.
Add skb length checks before accessing packet fields:
- Validate the skb has at least 1 byte for the status field.
- Validate the skb can hold the fixed-size header before parsing.
- In v2, bounds-check each variable-length rf_interface entry and its
extension parameters within the parsing loop.
- In v1, verify the skb is large enough for both the variable-length
rf_interfaces array and the trailing rsp_2 structure. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: Don't leak the extension cell pointer in the bounce payload
The bounce_error_event() embeds the failed event in the bounce payload
by pointing data.ext.ptr at it. When that event is a queued
variable-length event, its own data.ext.ptr holds the address of its
first extension cell, put there by snd_seq_event_dup(). The payload
goes out verbatim through snd_seq_expand_var_event(), so the address
reaches userspace.
That is the same address commit 705dd6dcbc0e ("ALSA: seq: Clear
variable event pointer on read") removed from the event header. The
read path still clears it there, just above the call that expands the
payload.
Embed a sanitised copy instead, treated exactly as snd_seq_read()
treats the header. A stack copy is enough because delivery is
synchronous and snd_seq_event_dup() copies before returning.
An unprivileged client reaches this by setting SNDRV_SEQ_FILTER_BOUNCE,
queueing a variable-length event to a port that does not exist and
reading the bounce back. Eight bytes on 64-bit, from its own pool. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/cma: Fix WARNING in res_to_rt
syzbot reported a WARN_ON(!res->dev) in res_to_rt() triggered via
addr_handler() during asynchronous address resolution:
"
WARNING: drivers/infiniband/core/restrack.c:138 at res_to_rt+0x1c4/0x230
CPU#1: kworker/u8:4/59
Modules linked in:
CPU: 1 UID: 0 PID: 59 Comm: kworker/u8:4 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Compute Engine, BIOS Google 07/24/2026
Workqueue: ib_addr process_one_req
RIP: 0010:res_to_rt+0x1c4/0x230 drivers/infiniband/core/restrack.c:138
RSP: 0018:ffffc9000201f850 EFLAGS: 00010293
RAX: ffffffff88d00ce5 RBX: ffff88807f0fd4f8 RCX: ffff88801e6e0000
RDX: 0000000000000000 RSI: ffffffff8fd996f0 RDI: 0000000000000003
RBP: 0000000000000000 R08: ffff88801e6e0000 R09: 000000000000000a
R10: 0000000000000009 R11: 0000000000000000 R12: dffffc0000000000
R13: 1ffff1100fe1fa9f R14: 0000000000000000 R15: 0000000000000003
FS: 0000000000000000(0000) GS:ffff888125012000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00001d559c3d2000 CR3: 0000000077c4c000 CR4: 00000000003526f0
Call Trace:
<TASK>
rdma_restrack_add+0x5a/0x8a0 drivers/infiniband/core/restrack.c:236
addr_handler+0x41a/0x5a0 drivers/infiniband/core/cma.c:3534
process_one_req+0x2eb/0x540 drivers/infiniband/core/addr.c:624
process_one_work kernel/workqueue.c:3375 [inline]
process_scheduled_works+0xc4e/0x1630 kernel/workqueue.c:3458
worker_thread+0xa47/0xfb0 kernel/workqueue.c:3539
kthread+0x388/0x470 kernel/kthread.c:436
ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
"
In addr_handler(), cma_acquire_dev_by_src_ip() is called to populate
id_priv->cma_dev and bind the associated ib_device to id_priv->id.device.
If cma_acquire_dev_by_src_ip() returns an error (non-zero status), the ID
remains unassociated with any RDMA device.
Previously, rdma_restrack_add(&id_priv->res) was invoked unconditionally
even when cma_acquire_dev_by_src_ip() failed, passing a resource with a
NULL dev pointer and triggering the WARN_ON assertion in res_to_rt().
Fix this by only adding the resource to restrack when acquiring the device
succeeds. |
| In the Linux kernel, the following vulnerability has been resolved:
ubi: Fix rollback for explicit UBI device numbers
ubi_init_attach() rolls back module initialization failures by scanning
ubi_devices[0..i-1], where i is the mtd= parameter index. That assumes
the parameter index matches the UBI device number.
That assumption is not true when mtd= specifies an explicit ubi_num. A
successfully attached device can be stored at a higher ubi_devices[]
slot, and a later failure can miss it during rollback.
Scan the full ubi_devices[] array and detach by the actual array index,
matching the way UBI devices are stored. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: ubi: Release device reference on busy detach
ubi_detach_mtd_dev() obtains a device reference through ubi_get_device()
before checking whether the UBI device is busy. The busy return path drops
ubi->ref_count but leaves the device reference held, so the device object
cannot be released after a later detach.
Drop the device reference before returning -EBUSY. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: xilinx: formatter_pcm: fix stream_data leak on open error
In xlnx_formatter_pcm_open(), stream_data is allocated and
adata->play_stream or adata->capture_stream is assigned early. If a
later step, such as snd_pcm_hw_constraint_step() or
snd_pcm_hw_constraint_integer(), fails, the function returns the error
immediately. ALSA does not call the close callback when open fails, so
stream_data is leaked and the stream pointer is left dangling, pointing
to a substream that ALSA frees. A later interrupt would then call
snd_pcm_period_elapsed() on the freed substream.
Free stream_data and clear the stream pointer on the error paths. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, s390: Clear fetch destination on faulting arena atomic
Same missing register clear as on riscv64. A RMW atomic on an arena pointer
is converted to BPF_PROBE_ATOMIC and gets an exception table entry, but
bpf_jit_probe_atomic_pre() only fills in the arena base and the probe
offset, leaving probe->reg at the -1 that bpf_jit_probe_init() set, which
bpf_jit_probe_post() writes into the entry and ex_handler_bpf() then reads
back as "there is nothing to clear".
That is right for a plain BPF_{ADD,AND,OR,XOR}, which only writes memory,
but an RMW carrying BPF_FETCH also reads the old value into a register:
src_reg for BPF_{ADD,AND,OR,XOR} | BPF_FETCH and BPF_XCHG, and r0 for
BPF_CMPXCHG. So on a fault over an unmapped arena page the program resumes
at the landing pad with whatever that register held before the atomic
instead of the 0 that every other BPF_PROBE_* access delivers.
Fill probe->reg in from bpf_atomic_load_reg(). Unlike x86-64 and arm64,
s390x does not report arena violations from its exception handler, so there
is no access direction to correct here, only the missing register clear. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/debug: Fix deadlock during unregister
Unregistering an s390dbf debug area while one of the associated debugfs
files is being written to can cause a deadlock:
$ echo >.../vmur/level $ rmmod vmur
===================================================
debugfs write
debugfs_file_get()
debug_unregister()
mutex_lock(debug_mutex)
debugfs_remove()
wait for debugfs_file_put()
debug_file_ops.write()
debug_input()
mutex_lock(debug_mutex) ==> DEADLOCK
Fix this by splitting debug_unregister() into an s390dbf and debugfs
part, and running only the s390dbf part with debug_mutex locked. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpt3sas: Avoid freeing unallocated PCIe SGL buffers
_base_release_memory_pools() unconditionally frees every
ioc->pcie_sg_lookup[] entry, including ones the setup loop never
allocated after a partial failure, causing a "bad dma" warning on debug
kernels or a NULL pointer dereference otherwise. |
| In the Linux kernel, the following vulnerability has been resolved:
net: page_pool: fix UAF in __page_pool_release_netmem_dma on xa_cmpxchg race
This bug was discovered while testing the hns3 driver under channel
reconfiguration (`ethtool -L` / `ethtool -G`) with iperf3 traffic on
arm64. The race is intermittently triggered when page_pool_destroy()
runs page_pool_scrub() concurrently with page return via
page_pool_put_netmem() on a different CPU. A WARN in
page_pool_clear_pp_info() surfaced the dangling DMA index bits left
by the cmpxchg loser, which led to the investigation.
page_pool_scrub() iterates pool->dma_mapped via xa_for_each() with no
page ref held. __page_pool_release_netmem_dma() currently reads and
writes netmem fields (dma_addr, DMA index bits in pp_magic) after
xa_cmpxchg() returns. The unref path calls put_page() unconditionally
regardless of the cmpxchg outcome; when it loses the cmpxchg, it still
frees the page before the scrub winner finishes these netmem accesses,
so scrub touches a freed page -- a Use-After-Free.
Fix this by splitting the DMA release into two functions:
1. __page_pool_unmap_netmem_dma() caches dma_addr before xa_cmpxchg(),
does the cmpxchg to remove the DMA mapping, and calls dma_unmap on
the cached address. It never touches netmem fields after the cmpxchg,
making it safe for the scrub path which holds no page ref.
2. __page_pool_release_netmem_dma() wraps the above and additionally
clears dma_addr and DMA index bits in netmem fields. This is safe
only when the caller holds a page ref, so it is used by the return
path (page_pool_return_netmem).
The scrub path calls __page_pool_unmap_netmem_dma() directly; the return
path calls __page_pool_release_netmem_dma(). |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: fix integer overflow in MFT cluster validation
In ntfs_init_from_boot(), the boot sector's MFT cluster numbers are
validated against the volume size with:
if (mlcn * sct_per_clst >= sectors ||
mlcn2 * sct_per_clst >= sectors)
goto out;
mlcn and mlcn2 are u64 fields read directly from the boot sector.
sct_per_clst is bounded above by 4096 (true_sectors_per_clst() plus
the is_power_of_2() check below it), but the multiplication is done
in u64 and wraps when mlcn (or mlcn2) is large enough -- e.g. mlcn
near 2^62 with sct_per_clst == 4 wraps to 0, which compares below
any non-zero 'sectors', so the check is bypassed and the malformed
record is accepted.
The accepted mlcn is then used unchanged in
sbi->mft.lbo = mlcn << cluster_bits;
In practice the resulting reads fail at the block layer (sb_bread()
returns NULL via grow_buffers()'s check_mul_overflow() guard), so
today this manifests as mount failing in odd places rather than as
something more dangerous, but the validation step is still wrong
and there is no reason for callers to rely on the block layer to
catch a value that should never have been accepted in the first
place.
Use check_mul_overflow() to compute the two sector positions and
fail the mount if either multiplication wraps; this preserves the
existing semantics (mlcn * sct_per_clst >= sectors) instead of
switching to division (mlcn >= sectors / sct_per_clst), which
would tighten the check at edge cases where 'sectors' is not a
multiple of sct_per_clst. The check_*_overflow() style is the
one ntfs3 already uses for similar on-disk arithmetic in
fs/ntfs3/run.c. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: validate topology volume range before allocation
SOF treats the topology mixer min and max values as non-negative indices
into its volume table. It stores them in signed fields, allocates max + 1
entries through an int argument, and later indexes the table with the
stored range.
An inverted range is invalid, while a maximum at or above INT_MAX cannot
be represented safely after the increment or in the signed fields.
Validate the complete range before storing it or allocating the table. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: scan: fix bus ID cleanup on device_add() failures
When device_add() fails after acpi_device_set_name() has allocated an
instance ID and a new acpi_device_bus_id has been linked into
acpi_bus_id_list, the rollback path only removes wakeup_list and
detaches the ACPI handle data.
That leaves the bus-ID bookkeeping behind and keeps the allocated
instance number consumed.
Move the bus-ID cleanup and wakeup-list removal into a single helper.
Use it from both the normal device teardown path and the device_add()
rollback path. The wakeup list node is initialized before registration,
so it can be deleted without checking whether the device is wakeup-
capable like in the original teardown path.
[ rjw: Rename acpi_device_del_list() to acpi_device_cleanup() ]
[ rjw: Subject and changelog edits ] |
