| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability, which was classified as critical, was found in H3C Magic NX30 Pro up to V100R007. This affects an unknown part of the file /api/wizard/getNetworkStatus of the component HTTP POST Request Handler. The manipulation leads to command injection. Access to the local network is required for this attack to succeed. The exploit has been disclosed to the public and may be used. It is recommended to upgrade the affected component. |
| The Advanced Ads plugin for WordPress is vulnerable to PHP Object Injection in all versions up to, and including, 1.52.1 via deserialization of untrusted input in the 'placement_slug' parameter. This makes it possible for authenticated attackers to inject a PHP Object. No POP chain is present in the vulnerable plugin. If a POP chain is present via an additional plugin or theme installed on the target system, it could allow the attacker to delete arbitrary files, retrieve sensitive data, or execute code. |
| The target device exposes a service on a specific TCP port with a configured
endpoint. The access to that endpoint is granted using a Basic Authentication
method. The endpoint accepts also the PUT method and it is possible to
write files on the target device file system. Files are written as root.
Using Postman it is possible to perform a Directory Traversal attack
and write files into any location of the device file system. Similarly to the PUT method, it is possible to leverage the
same mechanism to read any file from the file system by using the GET
method. |
| A flaw was found in the Observability Operator. The Operator creates a ServiceAccount with *ClusterRole* upon deployment of the *Namespace-Scoped* Custom Resource MonitorStack. This issue allows an adversarial Kubernetes Account with only namespaced-level roles, for example, a tenant controlling a namespace, to create a MonitorStack in the authorized namespace and then elevate permission to the cluster level by impersonating the ServiceAccount created by the Operator, resulting in privilege escalation and other issues. |
| Komm.One CMS 10.4.2.14 has a Server-Side Template Injection (SSTI) vulnerability via the Velocity template engine. It allows remote attackers to execute arbitrary code via a URL that specifies java.lang.Runtime in conjunction with getRuntime().exec followed by an OS command. |
| Implementations of UDP application protocol are vulnerable to network loops. An unauthenticated attacker can use maliciously-crafted packets against a vulnerable implementation that can lead to Denial of Service (DOS) and/or abuse of resources. |
| The unified WEBUI application of the ONT/Beacon device contains an input handling flaw that allows authenticated users to trigger unintended system-level command execution. Due to insufficient validation of user-supplied data, a low-privileged authenticated attacker may be able to execute arbitrary commands on the underlying ONT/Beacon operating system, potentially impacting the confidentiality, integrity, and availability of the device. |
| The JetFormBuilder plugin for WordPress is vulnerable to privilege escalation in all versions up to, and including, 3.3.4.1. This is due to improper restriction on user meta fields. This makes it possible for authenticated attackers, with administrator-level and above permissions, to register as super-admins on the sites configured as multi-sites. |
| SOCA Access Control System 180612 contains multiple insecure direct object reference vulnerabilities that allow attackers to access sensitive user credentials. Attackers can retrieve authenticated and unauthenticated user password hashes and pins through unprotected endpoints like Get_Permissions_From_DB.php and Ac10_ReadSortCard. |
| The User Registration – Custom Registration Form, Login Form, and User Profile WordPress Plugin plugin for WordPress is vulnerable to privilege escalation due to a missing capability check on the form_save_action() function in all versions up to, and including, 3.1.5. This makes it possible for authenticated attackers, with subscriber-level access and above, to update the registration form and make the default registration role administrator. This subsequently allows the attacker to register an account as an administrator on the site. |
| FLIR Brickstream 3D+ 2.1.742.1842 contains an unauthenticated vulnerability in the ExportConfig REST API that allows attackers to download sensitive configuration files. Attackers can exploit the getConfigExportFile.cgi endpoint to retrieve system configurations, potentially enabling authentication bypass and privilege escalation. |
| Incorrect access control in BookStack before v24.05.1 allows attackers to confirm existing system users and perform targeted notification email DoS via public facing forms. |
| In the module "Login as customer PRO" (loginascustomerpro) <1.2.7 from Weblir for PrestaShop, a guest can access direct link to connect to each customer account of the Shop if the module is not installed OR if a secret accessible to administrator is stolen. |
| There is a potential OOB Write vulnerability in the gen_prov_start function in pb_adv.c. The full length of the received data is copied into the link.rx.buf receiver buffer without any validation on the data size. |
| A lack of input validation in Realtek SD card reader driver before 10.0.26100.21374 through the implementation of the IOCTL_SCSI_PASS_THROUGH control of the SD card reader driver allows an attacker to write to predictable kernel memory locations, even as a low-privileged user. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: amba-pl011: avoid SBSA UART accessing DMACR register
Chapter "B Generic UART" in "ARM Server Base System Architecture" [1]
documentation describes a generic UART interface. Such generic UART
does not support DMA. In current code, sbsa_uart_pops and
amba_pl011_pops share the same stop_rx operation, which will invoke
pl011_dma_rx_stop, leading to an access of the DMACR register. This
commit adds a using_rx_dma check in pl011_dma_rx_stop to avoid the
access to DMACR register for SBSA UARTs which does not support DMA.
When the kernel enables DMA engine with "CONFIG_DMA_ENGINE=y", Linux
SBSA PL011 driver will access PL011 DMACR register in some functions.
For most real SBSA Pl011 hardware implementations, the DMACR write
behaviour will be ignored. So these DMACR operations will not cause
obvious problems. But for some virtual SBSA PL011 hardware, like Xen
virtual SBSA PL011 (vpl011) device, the behaviour might be different.
Xen vpl011 emulation will inject a data abort to guest, when guest is
accessing an unimplemented UART register. As Xen VPL011 is SBSA
compatible, it will not implement DMACR register. So when Linux SBSA
PL011 driver access DMACR register, it will get an unhandled data abort
fault and the application will get a segmentation fault:
Unhandled fault at 0xffffffc00944d048
Mem abort info:
ESR = 0x96000000
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x00: ttbr address size fault
Data abort info:
ISV = 0, ISS = 0x00000000
CM = 0, WnR = 0
swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000020e2e000
[ffffffc00944d048] pgd=100000003ffff803, p4d=100000003ffff803, pud=100000003ffff803, pmd=100000003fffa803, pte=006800009c090f13
Internal error: ttbr address size fault: 96000000 [#1] PREEMPT SMP
...
Call trace:
pl011_stop_rx+0x70/0x80
tty_port_shutdown+0x7c/0xb4
tty_port_close+0x60/0xcc
uart_close+0x34/0x8c
tty_release+0x144/0x4c0
__fput+0x78/0x220
____fput+0x1c/0x30
task_work_run+0x88/0xc0
do_notify_resume+0x8d0/0x123c
el0_svc+0xa8/0xc0
el0t_64_sync_handler+0xa4/0x130
el0t_64_sync+0x1a0/0x1a4
Code: b9000083 b901f001 794038a0 8b000042 (b9000041)
---[ end trace 83dd93df15c3216f ]---
note: bootlogd[132] exited with preempt_count 1
/etc/rcS.d/S07bootlogd: line 47: 132 Segmentation fault start-stop-daemon
This has been discussed in the Xen community, and we think it should fix
this in Linux. See [2] for more information.
[1] https://developer.arm.com/documentation/den0094/c/?lang=en
[2] https://lists.xenproject.org/archives/html/xen-devel/2022-11/msg00543.html |
| A vulnerability has been identified in Mendix Encryption (All versions >= V10.0.0 < V10.0.2). Affected versions of the module define a specific hard-coded default value for the EncryptionKey constant, which is used in projects where no individual EncryptionKey was specified.
This could allow to an attacker to decrypt any encrypted project data, as the default encryption key can be considered compromised. |
| OpenSSH 9.5 through 9.7 before 9.8 sometimes allows timing attacks against echo-off password entry (e.g., for su and Sudo) because of an ObscureKeystrokeTiming logic error. Similarly, other timing attacks against keystroke entry could occur. |
| The RapidLoad – Optimize Web Vitals Automatically plugin for WordPress is vulnerable to unauthorized access of data and modification of data due to a missing capability check on the uucss_data, update_rapidload_settings, wp_ajax_update_htaccess_file, uucss_update_rule, upload_rules, get_all_rules, update_titan_settings, preload_page, and activate_module functions in all versions up to, and including, 2.4.2. This makes it possible for authenticated attackers, with Subscriber-level access and above, to modify plugin settings or conduct SQL injection attacks. |
| Ratta SuperNote A6 X2 Nomad before December 2024 allows remote code execution because an arbitrary firmware image (signed with debug keys) can be sent to TCP port 60002, and placed into the correct image-update location as a consequence of both directory traversal and unintended handling of concurrency. |
