| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
xhci: Fix null pointer dereference when host dies
Make sure xhci_free_dev() and xhci_kill_endpoint_urbs() do not race
and cause null pointer dereference when host suddenly dies.
Usb core may call xhci_free_dev() which frees the xhci->devs[slot_id]
virt device at the same time that xhci_kill_endpoint_urbs() tries to
loop through all the device's endpoints, checking if there are any
cancelled urbs left to give back.
hold the xhci spinlock while freeing the virt device |
| In the Linux kernel, the following vulnerability has been resolved:
spi: Fix null dereference on suspend
A race condition exists where a synchronous (noqueue) transfer can be
active during a system suspend. This can cause a null pointer
dereference exception to occur when the system resumes.
Example order of events leading to the exception:
1. spi_sync() calls __spi_transfer_message_noqueue() which sets
ctlr->cur_msg
2. Spi transfer begins via spi_transfer_one_message()
3. System is suspended interrupting the transfer context
4. System is resumed
6. spi_controller_resume() calls spi_start_queue() which resets cur_msg
to NULL
7. Spi transfer context resumes and spi_finalize_current_message() is
called which dereferences cur_msg (which is now NULL)
Wait for synchronous transfers to complete before suspending by
acquiring the bus mutex and setting/checking a suspend flag. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/mm: Fix null-pointer dereference in pgtable_cache_add
kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. Ensure the allocation was successful
by checking the pointer validity. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: fix setting of fpc register
kvm_arch_vcpu_ioctl_set_fpu() allows to set the floating point control
(fpc) register of a guest cpu. The new value is tested for validity by
temporarily loading it into the fpc register.
This may lead to corruption of the fpc register of the host process:
if an interrupt happens while the value is temporarily loaded into the fpc
register, and within interrupt context floating point or vector registers
are used, the current fp/vx registers are saved with save_fpu_regs()
assuming they belong to user space and will be loaded into fp/vx registers
when returning to user space.
test_fp_ctl() restores the original user space / host process fpc register
value, however it will be discarded, when returning to user space.
In result the host process will incorrectly continue to run with the value
that was supposed to be used for a guest cpu.
Fix this by simply removing the test. There is another test right before
the SIE context is entered which will handles invalid values.
This results in a change of behaviour: invalid values will now be accepted
instead of that the ioctl fails with -EINVAL. This seems to be acceptable,
given that this interface is most likely not used anymore, and this is in
addition the same behaviour implemented with the memory mapped interface
(replace invalid values with zero) - see sync_regs() in kvm-s390.c. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k: Fix potential array-index-out-of-bounds read in ath9k_htc_txstatus()
Fix an array-index-out-of-bounds read in ath9k_htc_txstatus(). The bug
occurs when txs->cnt, data from a URB provided by a USB device, is
bigger than the size of the array txs->txstatus, which is
HTC_MAX_TX_STATUS. WARN_ON() already checks it, but there is no bug
handling code after the check. Make the function return if that is the
case.
Found by a modified version of syzkaller.
UBSAN: array-index-out-of-bounds in htc_drv_txrx.c
index 13 is out of range for type '__wmi_event_txstatus [12]'
Call Trace:
ath9k_htc_txstatus
ath9k_wmi_event_tasklet
tasklet_action_common
__do_softirq
irq_exit_rxu
sysvec_apic_timer_interrupt |
| In the Linux kernel, the following vulnerability has been resolved:
x86/srso: Add SRSO mitigation for Hygon processors
Add mitigation for the speculative return stack overflow vulnerability
which exists on Hygon processors too. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - add param check for RSA
Reject requests with a source buffer that is bigger than the size of the
key. This is to prevent a possible integer underflow that might happen
when copying the source scatterlist into a linear buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-throttle: Set BIO_THROTTLED when bio has been throttled
1.In current process, all bio will set the BIO_THROTTLED flag
after __blk_throtl_bio().
2.If bio needs to be throttled, it will start the timer and
stop submit bio directly. Bio will submit in
blk_throtl_dispatch_work_fn() when the timer expires.But in
the current process, if bio is throttled. The BIO_THROTTLED
will be set to bio after timer start. If the bio has been
completed, it may cause use-after-free blow.
BUG: KASAN: use-after-free in blk_throtl_bio+0x12f0/0x2c70
Read of size 2 at addr ffff88801b8902d4 by task fio/26380
dump_stack+0x9b/0xce
print_address_description.constprop.6+0x3e/0x60
kasan_report.cold.9+0x22/0x3a
blk_throtl_bio+0x12f0/0x2c70
submit_bio_checks+0x701/0x1550
submit_bio_noacct+0x83/0xc80
submit_bio+0xa7/0x330
mpage_readahead+0x380/0x500
read_pages+0x1c1/0xbf0
page_cache_ra_unbounded+0x471/0x6f0
do_page_cache_ra+0xda/0x110
ondemand_readahead+0x442/0xae0
page_cache_async_ra+0x210/0x300
generic_file_buffered_read+0x4d9/0x2130
generic_file_read_iter+0x315/0x490
blkdev_read_iter+0x113/0x1b0
aio_read+0x2ad/0x450
io_submit_one+0xc8e/0x1d60
__se_sys_io_submit+0x125/0x350
do_syscall_64+0x2d/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Allocated by task 26380:
kasan_save_stack+0x19/0x40
__kasan_kmalloc.constprop.2+0xc1/0xd0
kmem_cache_alloc+0x146/0x440
mempool_alloc+0x125/0x2f0
bio_alloc_bioset+0x353/0x590
mpage_alloc+0x3b/0x240
do_mpage_readpage+0xddf/0x1ef0
mpage_readahead+0x264/0x500
read_pages+0x1c1/0xbf0
page_cache_ra_unbounded+0x471/0x6f0
do_page_cache_ra+0xda/0x110
ondemand_readahead+0x442/0xae0
page_cache_async_ra+0x210/0x300
generic_file_buffered_read+0x4d9/0x2130
generic_file_read_iter+0x315/0x490
blkdev_read_iter+0x113/0x1b0
aio_read+0x2ad/0x450
io_submit_one+0xc8e/0x1d60
__se_sys_io_submit+0x125/0x350
do_syscall_64+0x2d/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Freed by task 0:
kasan_save_stack+0x19/0x40
kasan_set_track+0x1c/0x30
kasan_set_free_info+0x1b/0x30
__kasan_slab_free+0x111/0x160
kmem_cache_free+0x94/0x460
mempool_free+0xd6/0x320
bio_free+0xe0/0x130
bio_put+0xab/0xe0
bio_endio+0x3a6/0x5d0
blk_update_request+0x590/0x1370
scsi_end_request+0x7d/0x400
scsi_io_completion+0x1aa/0xe50
scsi_softirq_done+0x11b/0x240
blk_mq_complete_request+0xd4/0x120
scsi_mq_done+0xf0/0x200
virtscsi_vq_done+0xbc/0x150
vring_interrupt+0x179/0x390
__handle_irq_event_percpu+0xf7/0x490
handle_irq_event_percpu+0x7b/0x160
handle_irq_event+0xcc/0x170
handle_edge_irq+0x215/0xb20
common_interrupt+0x60/0x120
asm_common_interrupt+0x1e/0x40
Fix this by move BIO_THROTTLED set into the queue_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: libfc: Fix use after free in fc_exch_abts_resp()
fc_exch_release(ep) will decrease the ep's reference count. When the
reference count reaches zero, it is freed. But ep is still used in the
following code, which will lead to a use after free.
Return after the fc_exch_release() call to avoid use after free. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: tcmu: Fix possible page UAF
tcmu_try_get_data_page() looks up pages under cmdr_lock, but it does not
take refcount properly and just returns page pointer. When
tcmu_try_get_data_page() returns, the returned page may have been freed by
tcmu_blocks_release().
We need to get_page() under cmdr_lock to avoid concurrent
tcmu_blocks_release(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix use-after-free during gpu recovery
[Why]
[ 754.862560] refcount_t: underflow; use-after-free.
[ 754.862898] Call Trace:
[ 754.862903] <TASK>
[ 754.862913] amdgpu_job_free_cb+0xc2/0xe1 [amdgpu]
[ 754.863543] drm_sched_main.cold+0x34/0x39 [amd_sched]
[How]
The fw_fence may be not init, check whether dma_fence_init
is performed before job free |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: prevent copying too big compressed lzo segment
Compressed length can be corrupted to be a lot larger than memory
we have allocated for buffer.
This will cause memcpy in copy_compressed_segment to write outside
of allocated memory.
This mostly results in stuck read syscall but sometimes when using
btrfs send can get #GP
kernel: general protection fault, probably for non-canonical address 0x841551d5c1000: 0000 [#1] PREEMPT SMP NOPTI
kernel: CPU: 17 PID: 264 Comm: kworker/u256:7 Tainted: P OE 5.17.0-rc2-1 #12
kernel: Workqueue: btrfs-endio btrfs_work_helper [btrfs]
kernel: RIP: 0010:lzo_decompress_bio (./include/linux/fortify-string.h:225 fs/btrfs/lzo.c:322 fs/btrfs/lzo.c:394) btrfs
Code starting with the faulting instruction
===========================================
0:* 48 8b 06 mov (%rsi),%rax <-- trapping instruction
3: 48 8d 79 08 lea 0x8(%rcx),%rdi
7: 48 83 e7 f8 and $0xfffffffffffffff8,%rdi
b: 48 89 01 mov %rax,(%rcx)
e: 44 89 f0 mov %r14d,%eax
11: 48 8b 54 06 f8 mov -0x8(%rsi,%rax,1),%rdx
kernel: RSP: 0018:ffffb110812efd50 EFLAGS: 00010212
kernel: RAX: 0000000000001000 RBX: 000000009ca264c8 RCX: ffff98996e6d8ff8
kernel: RDX: 0000000000000064 RSI: 000841551d5c1000 RDI: ffffffff9500435d
kernel: RBP: ffff989a3be856c0 R08: 0000000000000000 R09: 0000000000000000
kernel: R10: 0000000000000000 R11: 0000000000001000 R12: ffff98996e6d8000
kernel: R13: 0000000000000008 R14: 0000000000001000 R15: 000841551d5c1000
kernel: FS: 0000000000000000(0000) GS:ffff98a09d640000(0000) knlGS:0000000000000000
kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
kernel: CR2: 00001e9f984d9ea8 CR3: 000000014971a000 CR4: 00000000003506e0
kernel: Call Trace:
kernel: <TASK>
kernel: end_compressed_bio_read (fs/btrfs/compression.c:104 fs/btrfs/compression.c:1363 fs/btrfs/compression.c:323) btrfs
kernel: end_workqueue_fn (fs/btrfs/disk-io.c:1923) btrfs
kernel: btrfs_work_helper (fs/btrfs/async-thread.c:326) btrfs
kernel: process_one_work (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:212 ./include/trace/events/workqueue.h:108 kernel/workqueue.c:2312)
kernel: worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2455)
kernel: ? process_one_work (kernel/workqueue.c:2397)
kernel: kthread (kernel/kthread.c:377)
kernel: ? kthread_complete_and_exit (kernel/kthread.c:332)
kernel: ret_from_fork (arch/x86/entry/entry_64.S:301)
kernel: </TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
ice: Fix race condition during interface enslave
Commit 5dbbbd01cbba83 ("ice: Avoid RTNL lock when re-creating
auxiliary device") changes a process of re-creation of aux device
so ice_plug_aux_dev() is called from ice_service_task() context.
This unfortunately opens a race window that can result in dead-lock
when interface has left LAG and immediately enters LAG again.
Reproducer:
```
#!/bin/sh
ip link add lag0 type bond mode 1 miimon 100
ip link set lag0
for n in {1..10}; do
echo Cycle: $n
ip link set ens7f0 master lag0
sleep 1
ip link set ens7f0 nomaster
done
```
This results in:
[20976.208697] Workqueue: ice ice_service_task [ice]
[20976.213422] Call Trace:
[20976.215871] __schedule+0x2d1/0x830
[20976.219364] schedule+0x35/0xa0
[20976.222510] schedule_preempt_disabled+0xa/0x10
[20976.227043] __mutex_lock.isra.7+0x310/0x420
[20976.235071] enum_all_gids_of_dev_cb+0x1c/0x100 [ib_core]
[20976.251215] ib_enum_roce_netdev+0xa4/0xe0 [ib_core]
[20976.256192] ib_cache_setup_one+0x33/0xa0 [ib_core]
[20976.261079] ib_register_device+0x40d/0x580 [ib_core]
[20976.266139] irdma_ib_register_device+0x129/0x250 [irdma]
[20976.281409] irdma_probe+0x2c1/0x360 [irdma]
[20976.285691] auxiliary_bus_probe+0x45/0x70
[20976.289790] really_probe+0x1f2/0x480
[20976.298509] driver_probe_device+0x49/0xc0
[20976.302609] bus_for_each_drv+0x79/0xc0
[20976.306448] __device_attach+0xdc/0x160
[20976.310286] bus_probe_device+0x9d/0xb0
[20976.314128] device_add+0x43c/0x890
[20976.321287] __auxiliary_device_add+0x43/0x60
[20976.325644] ice_plug_aux_dev+0xb2/0x100 [ice]
[20976.330109] ice_service_task+0xd0c/0xed0 [ice]
[20976.342591] process_one_work+0x1a7/0x360
[20976.350536] worker_thread+0x30/0x390
[20976.358128] kthread+0x10a/0x120
[20976.365547] ret_from_fork+0x1f/0x40
...
[20976.438030] task:ip state:D stack: 0 pid:213658 ppid:213627 flags:0x00004084
[20976.446469] Call Trace:
[20976.448921] __schedule+0x2d1/0x830
[20976.452414] schedule+0x35/0xa0
[20976.455559] schedule_preempt_disabled+0xa/0x10
[20976.460090] __mutex_lock.isra.7+0x310/0x420
[20976.464364] device_del+0x36/0x3c0
[20976.467772] ice_unplug_aux_dev+0x1a/0x40 [ice]
[20976.472313] ice_lag_event_handler+0x2a2/0x520 [ice]
[20976.477288] notifier_call_chain+0x47/0x70
[20976.481386] __netdev_upper_dev_link+0x18b/0x280
[20976.489845] bond_enslave+0xe05/0x1790 [bonding]
[20976.494475] do_setlink+0x336/0xf50
[20976.502517] __rtnl_newlink+0x529/0x8b0
[20976.543441] rtnl_newlink+0x43/0x60
[20976.546934] rtnetlink_rcv_msg+0x2b1/0x360
[20976.559238] netlink_rcv_skb+0x4c/0x120
[20976.563079] netlink_unicast+0x196/0x230
[20976.567005] netlink_sendmsg+0x204/0x3d0
[20976.570930] sock_sendmsg+0x4c/0x50
[20976.574423] ____sys_sendmsg+0x1eb/0x250
[20976.586807] ___sys_sendmsg+0x7c/0xc0
[20976.606353] __sys_sendmsg+0x57/0xa0
[20976.609930] do_syscall_64+0x5b/0x1a0
[20976.613598] entry_SYSCALL_64_after_hwframe+0x65/0xca
1. Command 'ip link ... set nomaster' causes that ice_plug_aux_dev()
is called from ice_service_task() context, aux device is created
and associated device->lock is taken.
2. Command 'ip link ... set master...' calls ice's notifier under
RTNL lock and that notifier calls ice_unplug_aux_dev(). That
function tries to take aux device->lock but this is already taken
by ice_plug_aux_dev() in step 1
3. Later ice_plug_aux_dev() tries to take RTNL lock but this is already
taken in step 2
4. Dead-lock
The patch fixes this issue by following changes:
- Bit ICE_FLAG_PLUG_AUX_DEV is kept to be set during ice_plug_aux_dev()
call in ice_service_task()
- The bit is checked in ice_clear_rdma_cap() and only if it is not set
then ice_unplug_aux_dev() is called. If it is set (in other words
plugging of aux device was requested and ice_plug_aux_dev() is
potentially running) then the function only clears the
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: myrs: Fix crash in error case
In myrs_detect(), cs->disable_intr is NULL when privdata->hw_init() fails
with non-zero. In this case, myrs_cleanup(cs) will call a NULL ptr and
crash the kernel.
[ 1.105606] myrs 0000:00:03.0: Unknown Initialization Error 5A
[ 1.105872] myrs 0000:00:03.0: Failed to initialize Controller
[ 1.106082] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 1.110774] Call Trace:
[ 1.110950] myrs_cleanup+0xe4/0x150 [myrs]
[ 1.111135] myrs_probe.cold+0x91/0x56a [myrs]
[ 1.111302] ? DAC960_GEM_intr_handler+0x1f0/0x1f0 [myrs]
[ 1.111500] local_pci_probe+0x48/0x90 |
| In the Linux kernel, the following vulnerability has been resolved:
iommu: Fix potential use-after-free during probe
Kasan has reported the following use after free on dev->iommu.
when a device probe fails and it is in process of freeing dev->iommu
in dev_iommu_free function, a deferred_probe_work_func runs in parallel
and tries to access dev->iommu->fwspec in of_iommu_configure path thus
causing use after free.
BUG: KASAN: use-after-free in of_iommu_configure+0xb4/0x4a4
Read of size 8 at addr ffffff87a2f1acb8 by task kworker/u16:2/153
Workqueue: events_unbound deferred_probe_work_func
Call trace:
dump_backtrace+0x0/0x33c
show_stack+0x18/0x24
dump_stack_lvl+0x16c/0x1e0
print_address_description+0x84/0x39c
__kasan_report+0x184/0x308
kasan_report+0x50/0x78
__asan_load8+0xc0/0xc4
of_iommu_configure+0xb4/0x4a4
of_dma_configure_id+0x2fc/0x4d4
platform_dma_configure+0x40/0x5c
really_probe+0x1b4/0xb74
driver_probe_device+0x11c/0x228
__device_attach_driver+0x14c/0x304
bus_for_each_drv+0x124/0x1b0
__device_attach+0x25c/0x334
device_initial_probe+0x24/0x34
bus_probe_device+0x78/0x134
deferred_probe_work_func+0x130/0x1a8
process_one_work+0x4c8/0x970
worker_thread+0x5c8/0xaec
kthread+0x1f8/0x220
ret_from_fork+0x10/0x18
Allocated by task 1:
____kasan_kmalloc+0xd4/0x114
__kasan_kmalloc+0x10/0x1c
kmem_cache_alloc_trace+0xe4/0x3d4
__iommu_probe_device+0x90/0x394
probe_iommu_group+0x70/0x9c
bus_for_each_dev+0x11c/0x19c
bus_iommu_probe+0xb8/0x7d4
bus_set_iommu+0xcc/0x13c
arm_smmu_bus_init+0x44/0x130 [arm_smmu]
arm_smmu_device_probe+0xb88/0xc54 [arm_smmu]
platform_drv_probe+0xe4/0x13c
really_probe+0x2c8/0xb74
driver_probe_device+0x11c/0x228
device_driver_attach+0xf0/0x16c
__driver_attach+0x80/0x320
bus_for_each_dev+0x11c/0x19c
driver_attach+0x38/0x48
bus_add_driver+0x1dc/0x3a4
driver_register+0x18c/0x244
__platform_driver_register+0x88/0x9c
init_module+0x64/0xff4 [arm_smmu]
do_one_initcall+0x17c/0x2f0
do_init_module+0xe8/0x378
load_module+0x3f80/0x4a40
__se_sys_finit_module+0x1a0/0x1e4
__arm64_sys_finit_module+0x44/0x58
el0_svc_common+0x100/0x264
do_el0_svc+0x38/0xa4
el0_svc+0x20/0x30
el0_sync_handler+0x68/0xac
el0_sync+0x160/0x180
Freed by task 1:
kasan_set_track+0x4c/0x84
kasan_set_free_info+0x28/0x4c
____kasan_slab_free+0x120/0x15c
__kasan_slab_free+0x18/0x28
slab_free_freelist_hook+0x204/0x2fc
kfree+0xfc/0x3a4
__iommu_probe_device+0x284/0x394
probe_iommu_group+0x70/0x9c
bus_for_each_dev+0x11c/0x19c
bus_iommu_probe+0xb8/0x7d4
bus_set_iommu+0xcc/0x13c
arm_smmu_bus_init+0x44/0x130 [arm_smmu]
arm_smmu_device_probe+0xb88/0xc54 [arm_smmu]
platform_drv_probe+0xe4/0x13c
really_probe+0x2c8/0xb74
driver_probe_device+0x11c/0x228
device_driver_attach+0xf0/0x16c
__driver_attach+0x80/0x320
bus_for_each_dev+0x11c/0x19c
driver_attach+0x38/0x48
bus_add_driver+0x1dc/0x3a4
driver_register+0x18c/0x244
__platform_driver_register+0x88/0x9c
init_module+0x64/0xff4 [arm_smmu]
do_one_initcall+0x17c/0x2f0
do_init_module+0xe8/0x378
load_module+0x3f80/0x4a40
__se_sys_finit_module+0x1a0/0x1e4
__arm64_sys_finit_module+0x44/0x58
el0_svc_common+0x100/0x264
do_el0_svc+0x38/0xa4
el0_svc+0x20/0x30
el0_sync_handler+0x68/0xac
el0_sync+0x160/0x180
Fix this by setting dev->iommu to NULL first and
then freeing dev_iommu structure in dev_iommu_free
function. |
| In the Linux kernel, the following vulnerability has been resolved:
xprtrdma: fix pointer derefs in error cases of rpcrdma_ep_create
If there are failures then we must not leave the non-NULL pointers with
the error value, otherwise `rpcrdma_ep_destroy` gets confused and tries
free them, resulting in an Oops. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Wrap dcn301_calculate_wm_and_dlg for FPU.
Mirrors the logic for dcn30. Cue lots of WARNs and some
kernel panics without this fix. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: fix memory leak when using debugfs_lookup()
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. Fix this up by properly
calling dput(). |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpt3sas: Fix use-after-free warning
Fix the following use-after-free warning which is observed during
controller reset:
refcount_t: underflow; use-after-free.
WARNING: CPU: 23 PID: 5399 at lib/refcount.c:28 refcount_warn_saturate+0xa6/0xf0 |
| In the Linux kernel, the following vulnerability has been resolved:
net/sunrpc: fix reference count leaks in rpc_sysfs_xprt_state_change
The refcount leak issues take place in an error handling path. When the
3rd argument buf doesn't match with "offline", "online" or "remove", the
function simply returns -EINVAL and forgets to decrease the reference
count of a rpc_xprt object and a rpc_xprt_switch object increased by
rpc_sysfs_xprt_kobj_get_xprt() and
rpc_sysfs_xprt_kobj_get_xprt_switch(), causing reference count leaks of
both unused objects.
Fix this issue by jumping to the error handling path labelled with
out_put when buf matches none of "offline", "online" or "remove". |
