Filtered by vendor Redhat
Subscriptions
Filtered by product Rhel E4s
Subscriptions
Total
1476 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-41091 | 1 Redhat | 5 Enterprise Linux, Rhel Aus, Rhel E4s and 2 more | 2024-12-19 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: tun: add missing verification for short frame The cited commit missed to check against the validity of the frame length in the tun_xdp_one() path, which could cause a corrupted skb to be sent downstack. Even before the skb is transmitted, the tun_xdp_one-->eth_type_trans() may access the Ethernet header although it can be less than ETH_HLEN. Once transmitted, this could either cause out-of-bound access beyond the actual length, or confuse the underlayer with incorrect or inconsistent header length in the skb metadata. In the alternative path, tun_get_user() already prohibits short frame which has the length less than Ethernet header size from being transmitted for IFF_TAP. This is to drop any frame shorter than the Ethernet header size just like how tun_get_user() does. CVE: CVE-2024-41091 | ||||
| CVE-2024-41090 | 1 Redhat | 5 Enterprise Linux, Rhel Aus, Rhel E4s and 2 more | 2024-12-19 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: tap: add missing verification for short frame The cited commit missed to check against the validity of the frame length in the tap_get_user_xdp() path, which could cause a corrupted skb to be sent downstack. Even before the skb is transmitted, the tap_get_user_xdp()-->skb_set_network_header() may assume the size is more than ETH_HLEN. Once transmitted, this could either cause out-of-bound access beyond the actual length, or confuse the underlayer with incorrect or inconsistent header length in the skb metadata. In the alternative path, tap_get_user() already prohibits short frame which has the length less than Ethernet header size from being transmitted. This is to drop any frame shorter than the Ethernet header size just like how tap_get_user() does. CVE: CVE-2024-41090 | ||||
| CVE-2024-41071 | 2 Linux, Redhat | 8 Linux Kernel, Enterprise Linux, Rhel Aus and 5 more | 2024-12-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: Avoid address calculations via out of bounds array indexing req->n_channels must be set before req->channels[] can be used. This patch fixes one of the issues encountered in [1]. [ 83.964255] UBSAN: array-index-out-of-bounds in net/mac80211/scan.c:364:4 [ 83.964258] index 0 is out of range for type 'struct ieee80211_channel *[]' [...] [ 83.964264] Call Trace: [ 83.964267] <TASK> [ 83.964269] dump_stack_lvl+0x3f/0xc0 [ 83.964274] __ubsan_handle_out_of_bounds+0xec/0x110 [ 83.964278] ieee80211_prep_hw_scan+0x2db/0x4b0 [ 83.964281] __ieee80211_start_scan+0x601/0x990 [ 83.964291] nl80211_trigger_scan+0x874/0x980 [ 83.964295] genl_family_rcv_msg_doit+0xe8/0x160 [ 83.964298] genl_rcv_msg+0x240/0x270 [...] [1] https://bugzilla.kernel.org/show_bug.cgi?id=218810 | ||||
| CVE-2024-41055 | 2 Linux, Redhat | 4 Linux Kernel, Enterprise Linux, Rhel E4s and 1 more | 2024-12-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm: prevent derefencing NULL ptr in pfn_section_valid() Commit 5ec8e8ea8b77 ("mm/sparsemem: fix race in accessing memory_section->usage") changed pfn_section_valid() to add a READ_ONCE() call around "ms->usage" to fix a race with section_deactivate() where ms->usage can be cleared. The READ_ONCE() call, by itself, is not enough to prevent NULL pointer dereference. We need to check its value before dereferencing it. | ||||
| CVE-2024-41014 | 1 Redhat | 5 Enterprise Linux, Rhel Aus, Rhel E4s and 2 more | 2024-12-19 | 6.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfs: add bounds checking to xlog_recover_process_data There is a lack of verification of the space occupied by fixed members of xlog_op_header in the xlog_recover_process_data. We can create a crafted image to trigger an out of bounds read by following these steps: 1) Mount an image of xfs, and do some file operations to leave records 2) Before umounting, copy the image for subsequent steps to simulate abnormal exit. Because umount will ensure that tail_blk and head_blk are the same, which will result in the inability to enter xlog_recover_process_data 3) Write a tool to parse and modify the copied image in step 2 4) Make the end of the xlog_op_header entries only 1 byte away from xlog_rec_header->h_size 5) xlog_rec_header->h_num_logops++ 6) Modify xlog_rec_header->h_crc Fix: Add a check to make sure there is sufficient space to access fixed members of xlog_op_header. | ||||
| CVE-2024-41009 | 2 Linux, Redhat | 6 Linux Kernel, Enterprise Linux, Rhel Aus and 3 more | 2024-12-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix overrunning reservations in ringbuf The BPF ring buffer internally is implemented as a power-of-2 sized circular buffer, with two logical and ever-increasing counters: consumer_pos is the consumer counter to show which logical position the consumer consumed the data, and producer_pos which is the producer counter denoting the amount of data reserved by all producers. Each time a record is reserved, the producer that "owns" the record will successfully advance producer counter. In user space each time a record is read, the consumer of the data advanced the consumer counter once it finished processing. Both counters are stored in separate pages so that from user space, the producer counter is read-only and the consumer counter is read-write. One aspect that simplifies and thus speeds up the implementation of both producers and consumers is how the data area is mapped twice contiguously back-to-back in the virtual memory, allowing to not take any special measures for samples that have to wrap around at the end of the circular buffer data area, because the next page after the last data page would be first data page again, and thus the sample will still appear completely contiguous in virtual memory. Each record has a struct bpf_ringbuf_hdr { u32 len; u32 pg_off; } header for book-keeping the length and offset, and is inaccessible to the BPF program. Helpers like bpf_ringbuf_reserve() return `(void *)hdr + BPF_RINGBUF_HDR_SZ` for the BPF program to use. Bing-Jhong and Muhammad reported that it is however possible to make a second allocated memory chunk overlapping with the first chunk and as a result, the BPF program is now able to edit first chunk's header. For example, consider the creation of a BPF_MAP_TYPE_RINGBUF map with size of 0x4000. Next, the consumer_pos is modified to 0x3000 /before/ a call to bpf_ringbuf_reserve() is made. This will allocate a chunk A, which is in [0x0,0x3008], and the BPF program is able to edit [0x8,0x3008]. Now, lets allocate a chunk B with size 0x3000. This will succeed because consumer_pos was edited ahead of time to pass the `new_prod_pos - cons_pos > rb->mask` check. Chunk B will be in range [0x3008,0x6010], and the BPF program is able to edit [0x3010,0x6010]. Due to the ring buffer memory layout mentioned earlier, the ranges [0x0,0x4000] and [0x4000,0x8000] point to the same data pages. This means that chunk B at [0x4000,0x4008] is chunk A's header. bpf_ringbuf_submit() / bpf_ringbuf_discard() use the header's pg_off to then locate the bpf_ringbuf itself via bpf_ringbuf_restore_from_rec(). Once chunk B modified chunk A's header, then bpf_ringbuf_commit() refers to the wrong page and could cause a crash. Fix it by calculating the oldest pending_pos and check whether the range from the oldest outstanding record to the newest would span beyond the ring buffer size. If that is the case, then reject the request. We've tested with the ring buffer benchmark in BPF selftests (./benchs/run_bench_ringbufs.sh) before/after the fix and while it seems a bit slower on some benchmarks, it is still not significantly enough to matter. | ||||
| CVE-2024-40998 | 1 Redhat | 5 Enterprise Linux, Rhel Aus, Rhel E4s and 2 more | 2024-12-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix uninitialized ratelimit_state->lock access in __ext4_fill_super() In the following concurrency we will access the uninitialized rs->lock: ext4_fill_super ext4_register_sysfs // sysfs registered msg_ratelimit_interval_ms // Other processes modify rs->interval to // non-zero via msg_ratelimit_interval_ms ext4_orphan_cleanup ext4_msg(sb, KERN_INFO, "Errors on filesystem, " __ext4_msg ___ratelimit(&(EXT4_SB(sb)->s_msg_ratelimit_state) if (!rs->interval) // do nothing if interval is 0 return 1; raw_spin_trylock_irqsave(&rs->lock, flags) raw_spin_trylock(lock) _raw_spin_trylock __raw_spin_trylock spin_acquire(&lock->dep_map, 0, 1, _RET_IP_) lock_acquire __lock_acquire register_lock_class assign_lock_key dump_stack(); ratelimit_state_init(&sbi->s_msg_ratelimit_state, 5 * HZ, 10); raw_spin_lock_init(&rs->lock); // init rs->lock here and get the following dump_stack: ========================================================= INFO: trying to register non-static key. The code is fine but needs lockdep annotation, or maybe you didn't initialize this object before use? turning off the locking correctness validator. CPU: 12 PID: 753 Comm: mount Tainted: G E 6.7.0-rc6-next-20231222 #504 [...] Call Trace: dump_stack_lvl+0xc5/0x170 dump_stack+0x18/0x30 register_lock_class+0x740/0x7c0 __lock_acquire+0x69/0x13a0 lock_acquire+0x120/0x450 _raw_spin_trylock+0x98/0xd0 ___ratelimit+0xf6/0x220 __ext4_msg+0x7f/0x160 [ext4] ext4_orphan_cleanup+0x665/0x740 [ext4] __ext4_fill_super+0x21ea/0x2b10 [ext4] ext4_fill_super+0x14d/0x360 [ext4] [...] ========================================================= Normally interval is 0 until s_msg_ratelimit_state is initialized, so ___ratelimit() does nothing. But registering sysfs precedes initializing rs->lock, so it is possible to change rs->interval to a non-zero value via the msg_ratelimit_interval_ms interface of sysfs while rs->lock is uninitialized, and then a call to ext4_msg triggers the problem by accessing an uninitialized rs->lock. Therefore register sysfs after all initializations are complete to avoid such problems. | ||||
| CVE-2024-40995 | 2 Linux, Redhat | 6 Linux Kernel, Enterprise Linux, Rhel Aus and 3 more | 2024-12-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: act_api: fix possible infinite loop in tcf_idr_check_alloc() syzbot found hanging tasks waiting on rtnl_lock [1] A reproducer is available in the syzbot bug. When a request to add multiple actions with the same index is sent, the second request will block forever on the first request. This holds rtnl_lock, and causes tasks to hang. Return -EAGAIN to prevent infinite looping, while keeping documented behavior. [1] INFO: task kworker/1:0:5088 blocked for more than 143 seconds. Not tainted 6.9.0-rc4-syzkaller-00173-g3cdb45594619 #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/1:0 state:D stack:23744 pid:5088 tgid:5088 ppid:2 flags:0x00004000 Workqueue: events_power_efficient reg_check_chans_work Call Trace: <TASK> context_switch kernel/sched/core.c:5409 [inline] __schedule+0xf15/0x5d00 kernel/sched/core.c:6746 __schedule_loop kernel/sched/core.c:6823 [inline] schedule+0xe7/0x350 kernel/sched/core.c:6838 schedule_preempt_disabled+0x13/0x30 kernel/sched/core.c:6895 __mutex_lock_common kernel/locking/mutex.c:684 [inline] __mutex_lock+0x5b8/0x9c0 kernel/locking/mutex.c:752 wiphy_lock include/net/cfg80211.h:5953 [inline] reg_leave_invalid_chans net/wireless/reg.c:2466 [inline] reg_check_chans_work+0x10a/0x10e0 net/wireless/reg.c:2481 | ||||
| CVE-2024-40984 | 1 Redhat | 3 Enterprise Linux, Rhel E4s, Rhel Eus | 2024-12-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ACPICA: Revert "ACPICA: avoid Info: mapping multiple BARs. Your kernel is fine." Undo the modifications made in commit d410ee5109a1 ("ACPICA: avoid "Info: mapping multiple BARs. Your kernel is fine.""). The initial purpose of this commit was to stop memory mappings for operation regions from overlapping page boundaries, as it can trigger warnings if different page attributes are present. However, it was found that when this situation arises, mapping continues until the boundary's end, but there is still an attempt to read/write the entire length of the map, leading to a NULL pointer deference. For example, if a four-byte mapping request is made but only one byte is mapped because it hits the current page boundary's end, a four-byte read/write attempt is still made, resulting in a NULL pointer deference. Instead, map the entire length, as the ACPI specification does not mandate that it must be within the same page boundary. It is permissible for it to be mapped across different regions. | ||||
| CVE-2024-40978 | 1 Redhat | 3 Enterprise Linux, Rhel E4s, Rhel Eus | 2024-12-19 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qedi: Fix crash while reading debugfs attribute The qedi_dbg_do_not_recover_cmd_read() function invokes sprintf() directly on a __user pointer, which results into the crash. To fix this issue, use a small local stack buffer for sprintf() and then call simple_read_from_buffer(), which in turns make the copy_to_user() call. BUG: unable to handle page fault for address: 00007f4801111000 PGD 8000000864df6067 P4D 8000000864df6067 PUD 864df7067 PMD 846028067 PTE 0 Oops: 0002 [#1] PREEMPT SMP PTI Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 06/15/2023 RIP: 0010:memcpy_orig+0xcd/0x130 RSP: 0018:ffffb7a18c3ffc40 EFLAGS: 00010202 RAX: 00007f4801111000 RBX: 00007f4801111000 RCX: 000000000000000f RDX: 000000000000000f RSI: ffffffffc0bfd7a0 RDI: 00007f4801111000 RBP: ffffffffc0bfd7a0 R08: 725f746f6e5f6f64 R09: 3d7265766f636572 R10: ffffb7a18c3ffd08 R11: 0000000000000000 R12: 00007f4881110fff R13: 000000007fffffff R14: ffffb7a18c3ffca0 R15: ffffffffc0bfd7af FS: 00007f480118a740(0000) GS:ffff98e38af00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f4801111000 CR3: 0000000864b8e001 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __die_body+0x1a/0x60 ? page_fault_oops+0x183/0x510 ? exc_page_fault+0x69/0x150 ? asm_exc_page_fault+0x22/0x30 ? memcpy_orig+0xcd/0x130 vsnprintf+0x102/0x4c0 sprintf+0x51/0x80 qedi_dbg_do_not_recover_cmd_read+0x2f/0x50 [qedi 6bcfdeeecdea037da47069eca2ba717c84a77324] full_proxy_read+0x50/0x80 vfs_read+0xa5/0x2e0 ? folio_add_new_anon_rmap+0x44/0xa0 ? set_pte_at+0x15/0x30 ? do_pte_missing+0x426/0x7f0 ksys_read+0xa5/0xe0 do_syscall_64+0x58/0x80 ? __count_memcg_events+0x46/0x90 ? count_memcg_event_mm+0x3d/0x60 ? handle_mm_fault+0x196/0x2f0 ? do_user_addr_fault+0x267/0x890 ? exc_page_fault+0x69/0x150 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f4800f20b4d | ||||
| CVE-2024-39502 | 1 Redhat | 5 Enterprise Linux, Rhel Aus, Rhel E4s and 2 more | 2024-12-19 | 6.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ionic: fix use after netif_napi_del() When queues are started, netif_napi_add() and napi_enable() are called. If there are 4 queues and only 3 queues are used for the current configuration, only 3 queues' napi should be registered and enabled. The ionic_qcq_enable() checks whether the .poll pointer is not NULL for enabling only the using queue' napi. Unused queues' napi will not be registered by netif_napi_add(), so the .poll pointer indicates NULL. But it couldn't distinguish whether the napi was unregistered or not because netif_napi_del() doesn't reset the .poll pointer to NULL. So, ionic_qcq_enable() calls napi_enable() for the queue, which was unregistered by netif_napi_del(). Reproducer: ethtool -L <interface name> rx 1 tx 1 combined 0 ethtool -L <interface name> rx 0 tx 0 combined 1 ethtool -L <interface name> rx 0 tx 0 combined 4 Splat looks like: kernel BUG at net/core/dev.c:6666! Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 3 PID: 1057 Comm: kworker/3:3 Not tainted 6.10.0-rc2+ #16 Workqueue: events ionic_lif_deferred_work [ionic] RIP: 0010:napi_enable+0x3b/0x40 Code: 48 89 c2 48 83 e2 f6 80 b9 61 09 00 00 00 74 0d 48 83 bf 60 01 00 00 00 74 03 80 ce 01 f0 4f RSP: 0018:ffffb6ed83227d48 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff97560cda0828 RCX: 0000000000000029 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff97560cda0a28 RBP: ffffb6ed83227d50 R08: 0000000000000400 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000 R13: ffff97560ce3c1a0 R14: 0000000000000000 R15: ffff975613ba0a20 FS: 0000000000000000(0000) GS:ffff975d5f780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8f734ee200 CR3: 0000000103e50000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <TASK> ? die+0x33/0x90 ? do_trap+0xd9/0x100 ? napi_enable+0x3b/0x40 ? do_error_trap+0x83/0xb0 ? napi_enable+0x3b/0x40 ? napi_enable+0x3b/0x40 ? exc_invalid_op+0x4e/0x70 ? napi_enable+0x3b/0x40 ? asm_exc_invalid_op+0x16/0x20 ? napi_enable+0x3b/0x40 ionic_qcq_enable+0xb7/0x180 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] ionic_start_queues+0xc4/0x290 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] ionic_link_status_check+0x11c/0x170 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] ionic_lif_deferred_work+0x129/0x280 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] process_one_work+0x145/0x360 worker_thread+0x2bb/0x3d0 ? __pfx_worker_thread+0x10/0x10 kthread+0xcc/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2d/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 | ||||
| CVE-2024-38596 | 1 Redhat | 5 Enterprise Linux, Rhel Aus, Rhel E4s and 2 more | 2024-12-19 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: af_unix: Fix data races in unix_release_sock/unix_stream_sendmsg A data-race condition has been identified in af_unix. In one data path, the write function unix_release_sock() atomically writes to sk->sk_shutdown using WRITE_ONCE. However, on the reader side, unix_stream_sendmsg() does not read it atomically. Consequently, this issue is causing the following KCSAN splat to occur: BUG: KCSAN: data-race in unix_release_sock / unix_stream_sendmsg write (marked) to 0xffff88867256ddbb of 1 bytes by task 7270 on cpu 28: unix_release_sock (net/unix/af_unix.c:640) unix_release (net/unix/af_unix.c:1050) sock_close (net/socket.c:659 net/socket.c:1421) __fput (fs/file_table.c:422) __fput_sync (fs/file_table.c:508) __se_sys_close (fs/open.c:1559 fs/open.c:1541) __x64_sys_close (fs/open.c:1541) x64_sys_call (arch/x86/entry/syscall_64.c:33) do_syscall_64 (arch/x86/entry/common.c:?) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) read to 0xffff88867256ddbb of 1 bytes by task 989 on cpu 14: unix_stream_sendmsg (net/unix/af_unix.c:2273) __sock_sendmsg (net/socket.c:730 net/socket.c:745) ____sys_sendmsg (net/socket.c:2584) __sys_sendmmsg (net/socket.c:2638 net/socket.c:2724) __x64_sys_sendmmsg (net/socket.c:2753 net/socket.c:2750 net/socket.c:2750) x64_sys_call (arch/x86/entry/syscall_64.c:33) do_syscall_64 (arch/x86/entry/common.c:?) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) value changed: 0x01 -> 0x03 The line numbers are related to commit dd5a440a31fa ("Linux 6.9-rc7"). Commit e1d09c2c2f57 ("af_unix: Fix data races around sk->sk_shutdown.") addressed a comparable issue in the past regarding sk->sk_shutdown. However, it overlooked resolving this particular data path. This patch only offending unix_stream_sendmsg() function, since the other reads seem to be protected by unix_state_lock() as discussed in | ||||
| CVE-2024-38586 | 1 Redhat | 5 Enterprise Linux, Rhel Aus, Rhel E4s and 2 more | 2024-12-19 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: r8169: Fix possible ring buffer corruption on fragmented Tx packets. An issue was found on the RTL8125b when transmitting small fragmented packets, whereby invalid entries were inserted into the transmit ring buffer, subsequently leading to calls to dma_unmap_single() with a null address. This was caused by rtl8169_start_xmit() not noticing changes to nr_frags which may occur when small packets are padded (to work around hardware quirks) in rtl8169_tso_csum_v2(). To fix this, postpone inspecting nr_frags until after any padding has been applied. | ||||
| CVE-2024-38570 | 2 Linux, Redhat | 6 Linux Kernel, Enterprise Linux, Rhel Aus and 3 more | 2024-12-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix potential glock use-after-free on unmount When a DLM lockspace is released and there ares still locks in that lockspace, DLM will unlock those locks automatically. Commit fb6791d100d1b started exploiting this behavior to speed up filesystem unmount: gfs2 would simply free glocks it didn't want to unlock and then release the lockspace. This didn't take the bast callbacks for asynchronous lock contention notifications into account, which remain active until until a lock is unlocked or its lockspace is released. To prevent those callbacks from accessing deallocated objects, put the glocks that should not be unlocked on the sd_dead_glocks list, release the lockspace, and only then free those glocks. As an additional measure, ignore unexpected ast and bast callbacks if the receiving glock is dead. | ||||
| CVE-2024-38564 | 1 Redhat | 5 Enterprise Linux, Rhel Aus, Rhel E4s and 2 more | 2024-12-19 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Add BPF_PROG_TYPE_CGROUP_SKB attach type enforcement in BPF_LINK_CREATE bpf_prog_attach uses attach_type_to_prog_type to enforce proper attach type for BPF_PROG_TYPE_CGROUP_SKB. link_create uses bpf_prog_get and relies on bpf_prog_attach_check_attach_type to properly verify prog_type <> attach_type association. Add missing attach_type enforcement for the link_create case. Otherwise, it's currently possible to attach cgroup_skb prog types to other cgroup hooks. | ||||
| CVE-2024-38555 | 2 Linux, Redhat | 6 Linux Kernel, Enterprise Linux, Rhel Aus and 3 more | 2024-12-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Discard command completions in internal error Fix use after free when FW completion arrives while device is in internal error state. Avoid calling completion handler in this case, since the device will flush the command interface and trigger all completions manually. Kernel log: ------------[ cut here ]------------ refcount_t: underflow; use-after-free. ... RIP: 0010:refcount_warn_saturate+0xd8/0xe0 ... Call Trace: <IRQ> ? __warn+0x79/0x120 ? refcount_warn_saturate+0xd8/0xe0 ? report_bug+0x17c/0x190 ? handle_bug+0x3c/0x60 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? refcount_warn_saturate+0xd8/0xe0 cmd_ent_put+0x13b/0x160 [mlx5_core] mlx5_cmd_comp_handler+0x5f9/0x670 [mlx5_core] cmd_comp_notifier+0x1f/0x30 [mlx5_core] notifier_call_chain+0x35/0xb0 atomic_notifier_call_chain+0x16/0x20 mlx5_eq_async_int+0xf6/0x290 [mlx5_core] notifier_call_chain+0x35/0xb0 atomic_notifier_call_chain+0x16/0x20 irq_int_handler+0x19/0x30 [mlx5_core] __handle_irq_event_percpu+0x4b/0x160 handle_irq_event+0x2e/0x80 handle_edge_irq+0x98/0x230 __common_interrupt+0x3b/0xa0 common_interrupt+0x7b/0xa0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40 | ||||
| CVE-2024-38540 | 1 Redhat | 5 Enterprise Linux, Rhel Aus, Rhel E4s and 2 more | 2024-12-19 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_re: avoid shift undefined behavior in bnxt_qplib_alloc_init_hwq Undefined behavior is triggered when bnxt_qplib_alloc_init_hwq is called with hwq_attr->aux_depth != 0 and hwq_attr->aux_stride == 0. In that case, "roundup_pow_of_two(hwq_attr->aux_stride)" gets called. roundup_pow_of_two is documented as undefined for 0. Fix it in the one caller that had this combination. The undefined behavior was detected by UBSAN: UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13 shift exponent 64 is too large for 64-bit type 'long unsigned int' CPU: 24 PID: 1075 Comm: (udev-worker) Not tainted 6.9.0-rc6+ #4 Hardware name: Abacus electric, s.r.o. - servis@abacus.cz Super Server/H12SSW-iN, BIOS 2.7 10/25/2023 Call Trace: <TASK> dump_stack_lvl+0x5d/0x80 ubsan_epilogue+0x5/0x30 __ubsan_handle_shift_out_of_bounds.cold+0x61/0xec __roundup_pow_of_two+0x25/0x35 [bnxt_re] bnxt_qplib_alloc_init_hwq+0xa1/0x470 [bnxt_re] bnxt_qplib_create_qp+0x19e/0x840 [bnxt_re] bnxt_re_create_qp+0x9b1/0xcd0 [bnxt_re] ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? __kmalloc+0x1b6/0x4f0 ? create_qp.part.0+0x128/0x1c0 [ib_core] ? __pfx_bnxt_re_create_qp+0x10/0x10 [bnxt_re] create_qp.part.0+0x128/0x1c0 [ib_core] ib_create_qp_kernel+0x50/0xd0 [ib_core] create_mad_qp+0x8e/0xe0 [ib_core] ? __pfx_qp_event_handler+0x10/0x10 [ib_core] ib_mad_init_device+0x2be/0x680 [ib_core] add_client_context+0x10d/0x1a0 [ib_core] enable_device_and_get+0xe0/0x1d0 [ib_core] ib_register_device+0x53c/0x630 [ib_core] ? srso_alias_return_thunk+0x5/0xfbef5 bnxt_re_probe+0xbd8/0xe50 [bnxt_re] ? __pfx_bnxt_re_probe+0x10/0x10 [bnxt_re] auxiliary_bus_probe+0x49/0x80 ? driver_sysfs_add+0x57/0xc0 really_probe+0xde/0x340 ? pm_runtime_barrier+0x54/0x90 ? __pfx___driver_attach+0x10/0x10 __driver_probe_device+0x78/0x110 driver_probe_device+0x1f/0xa0 __driver_attach+0xba/0x1c0 bus_for_each_dev+0x8f/0xe0 bus_add_driver+0x146/0x220 driver_register+0x72/0xd0 __auxiliary_driver_register+0x6e/0xd0 ? __pfx_bnxt_re_mod_init+0x10/0x10 [bnxt_re] bnxt_re_mod_init+0x3e/0xff0 [bnxt_re] ? __pfx_bnxt_re_mod_init+0x10/0x10 [bnxt_re] do_one_initcall+0x5b/0x310 do_init_module+0x90/0x250 init_module_from_file+0x86/0xc0 idempotent_init_module+0x121/0x2b0 __x64_sys_finit_module+0x5e/0xb0 do_syscall_64+0x82/0x160 ? srso_alias_return_thunk+0x5/0xfbef5 ? syscall_exit_to_user_mode_prepare+0x149/0x170 ? srso_alias_return_thunk+0x5/0xfbef5 ? syscall_exit_to_user_mode+0x75/0x230 ? srso_alias_return_thunk+0x5/0xfbef5 ? do_syscall_64+0x8e/0x160 ? srso_alias_return_thunk+0x5/0xfbef5 ? __count_memcg_events+0x69/0x100 ? srso_alias_return_thunk+0x5/0xfbef5 ? count_memcg_events.constprop.0+0x1a/0x30 ? srso_alias_return_thunk+0x5/0xfbef5 ? handle_mm_fault+0x1f0/0x300 ? srso_alias_return_thunk+0x5/0xfbef5 ? do_user_addr_fault+0x34e/0x640 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f4e5132821d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e3 db 0c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffca9c906a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 0000563ec8a8f130 RCX: 00007f4e5132821d RDX: 0000000000000000 RSI: 00007f4e518fa07d RDI: 000000000000003b RBP: 00007ffca9c90760 R08: 00007f4e513f6b20 R09: 00007ffca9c906f0 R10: 0000563ec8a8faa0 R11: 0000000000000246 R12: 00007f4e518fa07d R13: 0000000000020000 R14: 0000563ec8409e90 R15: 0000563ec8a8fa60 </TASK> ---[ end trace ]--- | ||||
| CVE-2024-36971 | 2 Linux, Redhat | 8 Linux Kernel, Enterprise Linux, Openshift and 5 more | 2024-12-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: fix __dst_negative_advice() race __dst_negative_advice() does not enforce proper RCU rules when sk->dst_cache must be cleared, leading to possible UAF. RCU rules are that we must first clear sk->sk_dst_cache, then call dst_release(old_dst). Note that sk_dst_reset(sk) is implementing this protocol correctly, while __dst_negative_advice() uses the wrong order. Given that ip6_negative_advice() has special logic against RTF_CACHE, this means each of the three ->negative_advice() existing methods must perform the sk_dst_reset() themselves. Note the check against NULL dst is centralized in __dst_negative_advice(), there is no need to duplicate it in various callbacks. Many thanks to Clement Lecigne for tracking this issue. This old bug became visible after the blamed commit, using UDP sockets. | ||||
| CVE-2024-36952 | 1 Redhat | 5 Enterprise Linux, Rhel Aus, Rhel E4s and 2 more | 2024-12-19 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Move NPIV's transport unregistration to after resource clean up There are cases after NPIV deletion where the fabric switch still believes the NPIV is logged into the fabric. This occurs when a vport is unregistered before the Remove All DA_ID CT and LOGO ELS are sent to the fabric. Currently fc_remove_host(), which calls dev_loss_tmo for all D_IDs including the fabric D_ID, removes the last ndlp reference and frees the ndlp rport object. This sometimes causes the race condition where the final DA_ID and LOGO are skipped from being sent to the fabric switch. Fix by moving the fc_remove_host() and scsi_remove_host() calls after DA_ID and LOGO are sent. | ||||
| CVE-2024-36941 | 1 Redhat | 5 Enterprise Linux, Rhel Aus, Rhel E4s and 2 more | 2024-12-19 | 5.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: don't free NULL coalescing rule If the parsing fails, we can dereference a NULL pointer here. | ||||