| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ath11k: Change max no of active probe SSID and BSSID to fw capability
The maximum number of SSIDs in a for active probe requests is currently
reported as 16 (WLAN_SCAN_PARAMS_MAX_SSID) when registering the driver.
The scan_req_params structure only has the capacity to hold 10 SSIDs.
This leads to a buffer overflow which can be triggered from
wpa_supplicant in userspace. When copying the SSIDs into the
scan_req_params structure in the ath11k_mac_op_hw_scan route, it can
overwrite the extraie pointer.
Firmware supports 16 ssid * 4 bssid, for each ssid 4 bssid combo probe
request will be sent, so totally 64 probe requests supported. So
set both max ssid and bssid to 16 and 4 respectively. Remove the
redundant macros of ssid and bssid.
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01300-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: lpfc: Fix call trace observed during I/O with CMF enabled
The following was seen with CMF enabled:
BUG: using smp_processor_id() in preemptible
code: systemd-udevd/31711
kernel: caller is lpfc_update_cmf_cmd+0x214/0x420 [lpfc]
kernel: CPU: 12 PID: 31711 Comm: systemd-udevd
kernel: Call Trace:
kernel: <TASK>
kernel: dump_stack_lvl+0x44/0x57
kernel: check_preemption_disabled+0xbf/0xe0
kernel: lpfc_update_cmf_cmd+0x214/0x420 [lpfc]
kernel: lpfc_nvme_fcp_io_submit+0x23b4/0x4df0 [lpfc]
this_cpu_ptr() calls smp_processor_id() in a preemptible context.
Fix by using per_cpu_ptr() with raw_smp_processor_id() instead. |
| In the Linux kernel, the following vulnerability has been resolved:
rtw89: ser: fix CAM leaks occurring in L2 reset
The CAM, meaning address CAM and bssid CAM here, will get leaks during
SER (system error recover) L2 reset process and ieee80211_restart_hw()
which is called by L2 reset process eventually.
The normal flow would be like
-> add interface (acquire 1)
-> enter ips (release 1)
-> leave ips (acquire 1)
-> connection (occupy 1) <(A) 1 leak after L2 reset if non-sec connection>
The ieee80211_restart_hw() flow (under connection)
-> ieee80211 reconfig
-> add interface (acquire 1)
-> leave ips (acquire 1)
-> connection (occupy (A) + 2) <(B) 1 more leak>
Originally, CAM is released before HW restart only if connection is under
security. Now, release CAM whatever connection it is to fix leak in (A).
OTOH, check if CAM is already valid to avoid acquiring multiple times to
fix (B).
Besides, if AP mode, release address CAM of all stations before HW restart. |
| In the Linux kernel, the following vulnerability has been resolved:
rcu-tasks: Fix race in schedule and flush work
While booting secondary CPUs, cpus_read_[lock/unlock] is not keeping
online cpumask stable. The transient online mask results in below
calltrace.
[ 0.324121] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[ 0.346652] Detected PIPT I-cache on CPU2
[ 0.347212] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
[ 0.377255] Detected PIPT I-cache on CPU3
[ 0.377823] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
[ 0.379040] ------------[ cut here ]------------
[ 0.383662] WARNING: CPU: 0 PID: 10 at kernel/workqueue.c:3084 __flush_work+0x12c/0x138
[ 0.384850] Modules linked in:
[ 0.385403] CPU: 0 PID: 10 Comm: rcu_tasks_rude_ Not tainted 5.17.0-rc3-v8+ #13
[ 0.386473] Hardware name: Raspberry Pi 4 Model B Rev 1.4 (DT)
[ 0.387289] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.388308] pc : __flush_work+0x12c/0x138
[ 0.388970] lr : __flush_work+0x80/0x138
[ 0.389620] sp : ffffffc00aaf3c60
[ 0.390139] x29: ffffffc00aaf3d20 x28: ffffffc009c16af0 x27: ffffff80f761df48
[ 0.391316] x26: 0000000000000004 x25: 0000000000000003 x24: 0000000000000100
[ 0.392493] x23: ffffffffffffffff x22: ffffffc009c16b10 x21: ffffffc009c16b28
[ 0.393668] x20: ffffffc009e53861 x19: ffffff80f77fbf40 x18: 00000000d744fcc9
[ 0.394842] x17: 000000000000000b x16: 00000000000001c2 x15: ffffffc009e57550
[ 0.396016] x14: 0000000000000000 x13: ffffffffffffffff x12: 0000000100000000
[ 0.397190] x11: 0000000000000462 x10: ffffff8040258008 x9 : 0000000100000000
[ 0.398364] x8 : 0000000000000000 x7 : ffffffc0093c8bf4 x6 : 0000000000000000
[ 0.399538] x5 : 0000000000000000 x4 : ffffffc00a976e40 x3 : ffffffc00810444c
[ 0.400711] x2 : 0000000000000004 x1 : 0000000000000000 x0 : 0000000000000000
[ 0.401886] Call trace:
[ 0.402309] __flush_work+0x12c/0x138
[ 0.402941] schedule_on_each_cpu+0x228/0x278
[ 0.403693] rcu_tasks_rude_wait_gp+0x130/0x144
[ 0.404502] rcu_tasks_kthread+0x220/0x254
[ 0.405264] kthread+0x174/0x1ac
[ 0.405837] ret_from_fork+0x10/0x20
[ 0.406456] irq event stamp: 102
[ 0.406966] hardirqs last enabled at (101): [<ffffffc0093c8468>] _raw_spin_unlock_irq+0x78/0xb4
[ 0.408304] hardirqs last disabled at (102): [<ffffffc0093b8270>] el1_dbg+0x24/0x5c
[ 0.409410] softirqs last enabled at (54): [<ffffffc0081b80c8>] local_bh_enable+0xc/0x2c
[ 0.410645] softirqs last disabled at (50): [<ffffffc0081b809c>] local_bh_disable+0xc/0x2c
[ 0.411890] ---[ end trace 0000000000000000 ]---
[ 0.413000] smp: Brought up 1 node, 4 CPUs
[ 0.413762] SMP: Total of 4 processors activated.
[ 0.414566] CPU features: detected: 32-bit EL0 Support
[ 0.415414] CPU features: detected: 32-bit EL1 Support
[ 0.416278] CPU features: detected: CRC32 instructions
[ 0.447021] Callback from call_rcu_tasks_rude() invoked.
[ 0.506693] Callback from call_rcu_tasks() invoked.
This commit therefore fixes this issue by applying a single-CPU
optimization to the RCU Tasks Rude grace-period process. The key point
here is that the purpose of this RCU flavor is to force a schedule on
each online CPU since some past event. But the rcu_tasks_rude_wait_gp()
function runs in the context of the RCU Tasks Rude's grace-period kthread,
so there must already have been a context switch on the current CPU since
the call to either synchronize_rcu_tasks_rude() or call_rcu_tasks_rude().
So if there is only a single CPU online, RCU Tasks Rude's grace-period
kthread does not need to anything at all.
It turns out that the rcu_tasks_rude_wait_gp() function's call to
schedule_on_each_cpu() causes problems during early boot. During that
time, there is only one online CPU, namely the boot CPU. Therefore,
applying this single-CPU optimization fixes early-boot instances of
this problem. |
| A vulnerability exists in F5OS-A software that allows a highly privileged authenticated attacker to access sensitive FIPS hardware security module (HSM) information on F5 rSeries systems. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: qcom: clk-rcg2: Update logic to calculate D value for RCG
The display pixel clock has a requirement on certain newer platforms to
support M/N as (2/3) and the final D value calculated results in
underflow errors.
As the current implementation does not check for D value is within
the accepted range for a given M & N value. Update the logic to
calculate the final D value based on the range. |
| In the Linux kernel, the following vulnerability has been resolved:
drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool
cpsw_ethtool_begin directly returns the result of pm_runtime_get_sync
when successful.
pm_runtime_get_sync returns -error code on failure and 0 on successful
resume but also 1 when the device is already active. So the common case
for cpsw_ethtool_begin is to return 1. That leads to inconsistent calls
to pm_runtime_put in the call-chain so that pm_runtime_put is called
one too many times and as result leaving the cpsw dev behind suspended.
The suspended cpsw dev leads to an access violation later on by
different parts of the cpsw driver.
Fix this by calling the return-friendly pm_runtime_resume_and_get
function. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix 'scheduling while atomic' on aux critical err interrupt
There's a kernel BUG splat on processing aux critical error
interrupts in ice_misc_intr():
[ 2100.917085] BUG: scheduling while atomic: swapper/15/0/0x00010000
...
[ 2101.060770] Call Trace:
[ 2101.063229] <IRQ>
[ 2101.065252] dump_stack+0x41/0x60
[ 2101.068587] __schedule_bug.cold.100+0x4c/0x58
[ 2101.073060] __schedule+0x6a4/0x830
[ 2101.076570] schedule+0x35/0xa0
[ 2101.079727] schedule_preempt_disabled+0xa/0x10
[ 2101.084284] __mutex_lock.isra.7+0x310/0x420
[ 2101.088580] ? ice_misc_intr+0x201/0x2e0 [ice]
[ 2101.093078] ice_send_event_to_aux+0x25/0x70 [ice]
[ 2101.097921] ice_misc_intr+0x220/0x2e0 [ice]
[ 2101.102232] __handle_irq_event_percpu+0x40/0x180
[ 2101.106965] handle_irq_event_percpu+0x30/0x80
[ 2101.111434] handle_irq_event+0x36/0x53
[ 2101.115292] handle_edge_irq+0x82/0x190
[ 2101.119148] handle_irq+0x1c/0x30
[ 2101.122480] do_IRQ+0x49/0xd0
[ 2101.125465] common_interrupt+0xf/0xf
[ 2101.129146] </IRQ>
...
As Andrew correctly mentioned previously[0], the following call
ladder happens:
ice_misc_intr() <- hardirq
ice_send_event_to_aux()
device_lock()
mutex_lock()
might_sleep()
might_resched() <- oops
Add a new PF state bit which indicates that an aux critical error
occurred and serve it in ice_service_task() in process context.
The new ice_pf::oicr_err_reg is read-write in both hardirq and
process contexts, but only 3 bits of non-critical data probably
aren't worth explicit synchronizing (and they're even in the same
byte [31:24]).
[0] https://lore.kernel.org/all/YeSRUVmrdmlUXHDn@lunn.ch |
| In the Linux kernel, the following vulnerability has been resolved:
net: bcmgenet: Use stronger register read/writes to assure ordering
GCC12 appears to be much smarter about its dependency tracking and is
aware that the relaxed variants are just normal loads and stores and
this is causing problems like:
[ 210.074549] ------------[ cut here ]------------
[ 210.079223] NETDEV WATCHDOG: enabcm6e4ei0 (bcmgenet): transmit queue 1 timed out
[ 210.086717] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:529 dev_watchdog+0x234/0x240
[ 210.095044] Modules linked in: genet(E) nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat]
[ 210.146561] ACPI CPPC: PCC check channel failed for ss: 0. ret=-110
[ 210.146927] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G E 5.17.0-rc7G12+ #58
[ 210.153226] CPPC Cpufreq:cppc_scale_freq_workfn: failed to read perf counters
[ 210.161349] Hardware name: Raspberry Pi Foundation Raspberry Pi 4 Model B/Raspberry Pi 4 Model B, BIOS EDK2-DEV 02/08/2022
[ 210.161353] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 210.161358] pc : dev_watchdog+0x234/0x240
[ 210.161364] lr : dev_watchdog+0x234/0x240
[ 210.161368] sp : ffff8000080a3a40
[ 210.161370] x29: ffff8000080a3a40 x28: ffffcd425af87000 x27: ffff8000080a3b20
[ 210.205150] x26: ffffcd425aa00000 x25: 0000000000000001 x24: ffffcd425af8ec08
[ 210.212321] x23: 0000000000000100 x22: ffffcd425af87000 x21: ffff55b142688000
[ 210.219491] x20: 0000000000000001 x19: ffff55b1426884c8 x18: ffffffffffffffff
[ 210.226661] x17: 64656d6974203120 x16: 0000000000000001 x15: 6d736e617274203a
[ 210.233831] x14: 2974656e65676d63 x13: ffffcd4259c300d8 x12: ffffcd425b07d5f0
[ 210.241001] x11: 00000000ffffffff x10: ffffcd425b07d5f0 x9 : ffffcd4258bdad9c
[ 210.248171] x8 : 00000000ffffdfff x7 : 000000000000003f x6 : 0000000000000000
[ 210.255341] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000001000
[ 210.262511] x2 : 0000000000001000 x1 : 0000000000000005 x0 : 0000000000000044
[ 210.269682] Call trace:
[ 210.272133] dev_watchdog+0x234/0x240
[ 210.275811] call_timer_fn+0x3c/0x15c
[ 210.279489] __run_timers.part.0+0x288/0x310
[ 210.283777] run_timer_softirq+0x48/0x80
[ 210.287716] __do_softirq+0x128/0x360
[ 210.291392] __irq_exit_rcu+0x138/0x140
[ 210.295243] irq_exit_rcu+0x1c/0x30
[ 210.298745] el1_interrupt+0x38/0x54
[ 210.302334] el1h_64_irq_handler+0x18/0x24
[ 210.306445] el1h_64_irq+0x7c/0x80
[ 210.309857] arch_cpu_idle+0x18/0x2c
[ 210.313445] default_idle_call+0x4c/0x140
[ 210.317470] cpuidle_idle_call+0x14c/0x1a0
[ 210.321584] do_idle+0xb0/0x100
[ 210.324737] cpu_startup_entry+0x30/0x8c
[ 210.328675] secondary_start_kernel+0xe4/0x110
[ 210.333138] __secondary_switched+0x94/0x98
The assumption when these were relaxed seems to be that device memory
would be mapped non reordering, and that other constructs
(spinlocks/etc) would provide the barriers to assure that packet data
and in memory rings/queues were ordered with respect to device
register reads/writes. This itself seems a bit sketchy, but the real
problem with GCC12 is that it is moving the actual reads/writes around
at will as though they were independent operations when in truth they
are not, but the compiler can't know that. When looking at the
assembly dumps for many of these routines its possible to see very
clean, but not strictly in program order operations occurring as the
compiler would be free to do if these weren't actually register
reads/write operations.
Its possible to suppress the timeout with a liberal bit of dma_mb()'s
sprinkled around but the device still seems unable to reliably
send/receive data. A better plan is to use the safer readl/writel
everywhere.
Since this partially reverts an older commit, which notes the use of
the relaxed variants for performance reasons. I would suggest that
any performance problems
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/nldev: Prevent underflow in nldev_stat_set_counter_dynamic_doit()
This code checks "index" for an upper bound but it does not check for
negatives. Change the type to unsigned to prevent underflows. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Fix more uncharged while msg has more_data
In tcp_bpf_send_verdict(), if msg has more data after
tcp_bpf_sendmsg_redir():
tcp_bpf_send_verdict()
tosend = msg->sg.size //msg->sg.size = 22220
case __SK_REDIRECT:
sk_msg_return() //uncharged msg->sg.size(22220) sk->sk_forward_alloc
tcp_bpf_sendmsg_redir() //after tcp_bpf_sendmsg_redir, msg->sg.size=11000
goto more_data;
tosend = msg->sg.size //msg->sg.size = 11000
case __SK_REDIRECT:
sk_msg_return() //uncharged msg->sg.size(11000) to sk->sk_forward_alloc
The msg->sg.size(11000) has been uncharged twice, to fix we can charge the
remaining msg->sg.size before goto more data.
This issue can cause the following info:
WARNING: CPU: 0 PID: 9860 at net/core/stream.c:208 sk_stream_kill_queues+0xd4/0x1a0
Call Trace:
<TASK>
inet_csk_destroy_sock+0x55/0x110
__tcp_close+0x279/0x470
tcp_close+0x1f/0x60
inet_release+0x3f/0x80
__sock_release+0x3d/0xb0
sock_close+0x11/0x20
__fput+0x92/0x250
task_work_run+0x6a/0xa0
do_exit+0x33b/0xb60
do_group_exit+0x2f/0xa0
get_signal+0xb6/0x950
arch_do_signal_or_restart+0xac/0x2a0
? vfs_write+0x237/0x290
exit_to_user_mode_prepare+0xa9/0x200
syscall_exit_to_user_mode+0x12/0x30
do_syscall_64+0x46/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
</TASK>
WARNING: CPU: 0 PID: 2136 at net/ipv4/af_inet.c:155 inet_sock_destruct+0x13c/0x260
Call Trace:
<TASK>
__sk_destruct+0x24/0x1f0
sk_psock_destroy+0x19b/0x1c0
process_one_work+0x1b3/0x3c0
worker_thread+0x30/0x350
? process_one_work+0x3c0/0x3c0
kthread+0xe6/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: pm8001: Fix abort all task initialization
In pm80xx_send_abort_all(), the n_elem field of the ccb used is not
initialized to 0. This missing initialization sometimes lead to the task
completion path seeing the ccb with a non-zero n_elem resulting in the
execution of invalid dma_unmap_sg() calls in pm8001_ccb_task_free(),
causing a crash such as:
[ 197.676341] RIP: 0010:iommu_dma_unmap_sg+0x6d/0x280
[ 197.700204] RSP: 0018:ffff889bbcf89c88 EFLAGS: 00010012
[ 197.705485] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff83d0bda0
[ 197.712687] RDX: 0000000000000002 RSI: 0000000000000000 RDI: ffff88810dffc0d0
[ 197.719887] RBP: 0000000000000000 R08: 0000000000000000 R09: ffff8881c790098b
[ 197.727089] R10: ffffed1038f20131 R11: 0000000000000001 R12: 0000000000000000
[ 197.734296] R13: ffff88810dffc0d0 R14: 0000000000000010 R15: 0000000000000000
[ 197.741493] FS: 0000000000000000(0000) GS:ffff889bbcf80000(0000) knlGS:0000000000000000
[ 197.749659] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 197.755459] CR2: 00007f16c1b42734 CR3: 0000000004814000 CR4: 0000000000350ee0
[ 197.762656] Call Trace:
[ 197.765127] <IRQ>
[ 197.767162] pm8001_ccb_task_free+0x5f1/0x820 [pm80xx]
[ 197.772364] ? do_raw_spin_unlock+0x54/0x220
[ 197.776680] pm8001_mpi_task_abort_resp+0x2ce/0x4f0 [pm80xx]
[ 197.782406] process_oq+0xe85/0x7890 [pm80xx]
[ 197.786817] ? lock_acquire+0x194/0x490
[ 197.790697] ? handle_irq_event+0x10e/0x1b0
[ 197.794920] ? mpi_sata_completion+0x2d70/0x2d70 [pm80xx]
[ 197.800378] ? __wake_up_bit+0x100/0x100
[ 197.804340] ? lock_is_held_type+0x98/0x110
[ 197.808565] pm80xx_chip_isr+0x94/0x130 [pm80xx]
[ 197.813243] tasklet_action_common.constprop.0+0x24b/0x2f0
[ 197.818785] __do_softirq+0x1b5/0x82d
[ 197.822485] ? do_raw_spin_unlock+0x54/0x220
[ 197.826799] __irq_exit_rcu+0x17e/0x1e0
[ 197.830678] irq_exit_rcu+0xa/0x20
[ 197.834114] common_interrupt+0x78/0x90
[ 197.840051] </IRQ>
[ 197.844236] <TASK>
[ 197.848397] asm_common_interrupt+0x1e/0x40
Avoid this issue by always initializing the ccb n_elem field to 0 in
pm8001_send_abort_all(), pm8001_send_read_log() and
pm80xx_send_abort_all(). |
| In the Linux kernel, the following vulnerability has been resolved:
igc: avoid kernel warning when changing RX ring parameters
Calling ethtool changing the RX ring parameters like this:
$ ethtool -G eth0 rx 1024
on igc triggers kernel warnings like this:
[ 225.198467] ------------[ cut here ]------------
[ 225.198473] Missing unregister, handled but fix driver
[ 225.198485] WARNING: CPU: 7 PID: 959 at net/core/xdp.c:168
xdp_rxq_info_reg+0x79/0xd0
[...]
[ 225.198601] Call Trace:
[ 225.198604] <TASK>
[ 225.198609] igc_setup_rx_resources+0x3f/0xe0 [igc]
[ 225.198617] igc_ethtool_set_ringparam+0x30e/0x450 [igc]
[ 225.198626] ethnl_set_rings+0x18a/0x250
[ 225.198631] genl_family_rcv_msg_doit+0xca/0x110
[ 225.198637] genl_rcv_msg+0xce/0x1c0
[ 225.198640] ? rings_prepare_data+0x60/0x60
[ 225.198644] ? genl_get_cmd+0xd0/0xd0
[ 225.198647] netlink_rcv_skb+0x4e/0xf0
[ 225.198652] genl_rcv+0x24/0x40
[ 225.198655] netlink_unicast+0x20e/0x330
[ 225.198659] netlink_sendmsg+0x23f/0x480
[ 225.198663] sock_sendmsg+0x5b/0x60
[ 225.198667] __sys_sendto+0xf0/0x160
[ 225.198671] ? handle_mm_fault+0xb2/0x280
[ 225.198676] ? do_user_addr_fault+0x1eb/0x690
[ 225.198680] __x64_sys_sendto+0x20/0x30
[ 225.198683] do_syscall_64+0x38/0x90
[ 225.198687] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 225.198693] RIP: 0033:0x7f7ae38ac3aa
igc_ethtool_set_ringparam() copies the igc_ring structure but neglects to
reset the xdp_rxq_info member before calling igc_setup_rx_resources().
This in turn calls xdp_rxq_info_reg() with an already registered xdp_rxq_info.
Make sure to unregister the xdp_rxq_info structure first in
igc_setup_rx_resources. |
| In the Linux kernel, the following vulnerability has been resolved:
net: asix: add proper error handling of usb read errors
Syzbot once again hit uninit value in asix driver. The problem still the
same -- asix_read_cmd() reads less bytes, than was requested by caller.
Since all read requests are performed via asix_read_cmd() let's catch
usb related error there and add __must_check notation to be sure all
callers actually check return value.
So, this patch adds sanity check inside asix_read_cmd(), that simply
checks if bytes read are not less, than was requested and adds missing
error handling of asix_read_cmd() all across the driver code. |
| In the Linux kernel, the following vulnerability has been resolved:
dax: make sure inodes are flushed before destroy cache
A bug can be triggered by following command
$ modprobe nd_pmem && modprobe -r nd_pmem
[ 10.060014] BUG dax_cache (Not tainted): Objects remaining in dax_cache on __kmem_cache_shutdown()
[ 10.060938] Slab 0x0000000085b729ac objects=9 used=1 fp=0x000000004f5ae469 flags=0x200000000010200(slab|head|node)
[ 10.062433] Call Trace:
[ 10.062673] dump_stack_lvl+0x34/0x44
[ 10.062865] slab_err+0x90/0xd0
[ 10.063619] __kmem_cache_shutdown+0x13b/0x2f0
[ 10.063848] kmem_cache_destroy+0x4a/0x110
[ 10.064058] __x64_sys_delete_module+0x265/0x300
This is caused by dax_fs_exit() not flushing inodes before destroy cache.
To fix this issue, call rcu_barrier() before destroy cache. |
| In the Linux kernel, the following vulnerability has been resolved:
ptp: unregister virtual clocks when unregistering physical clock.
When unregistering a physical clock which has some virtual clocks,
unregister the virtual clocks with it.
This fixes the following oops, which can be triggered by unloading
a driver providing a PTP clock when it has enabled virtual clocks:
BUG: unable to handle page fault for address: ffffffffc04fc4d8
Oops: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:ptp_vclock_read+0x31/0xb0
Call Trace:
timecounter_read+0xf/0x50
ptp_vclock_refresh+0x2c/0x50
? ptp_clock_release+0x40/0x40
ptp_aux_kworker+0x17/0x30
kthread_worker_fn+0x9b/0x240
? kthread_should_park+0x30/0x30
kthread+0xe2/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: atmel: Add missing of_node_put() in at91sam9g20ek_audio_probe
This node pointer is returned by of_parse_phandle() with refcount
incremented in this function.
Calling of_node_put() to avoid the refcount leak. |
| In the Linux kernel, the following vulnerability has been resolved:
media: stk1160: If start stream fails, return buffers with VB2_BUF_STATE_QUEUED
If the callback 'start_streaming' fails, then all
queued buffers in the driver should be returned with
state 'VB2_BUF_STATE_QUEUED'. Currently, they are
returned with 'VB2_BUF_STATE_ERROR' which is wrong.
Fix this. This also fixes the warning:
[ 65.583633] WARNING: CPU: 5 PID: 593 at drivers/media/common/videobuf2/videobuf2-core.c:1612 vb2_start_streaming+0xd4/0x160 [videobuf2_common]
[ 65.585027] Modules linked in: snd_usb_audio snd_hwdep snd_usbmidi_lib snd_rawmidi snd_soc_hdmi_codec dw_hdmi_i2s_audio saa7115 stk1160 videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev mc crct10dif_ce panfrost snd_soc_simple_card snd_soc_audio_graph_card snd_soc_spdif_tx snd_soc_simple_card_utils gpu_sched phy_rockchip_pcie snd_soc_rockchip_i2s rockchipdrm analogix_dp dw_mipi_dsi dw_hdmi cec drm_kms_helper drm rtc_rk808 rockchip_saradc industrialio_triggered_buffer kfifo_buf rockchip_thermal pcie_rockchip_host ip_tables x_tables ipv6
[ 65.589383] CPU: 5 PID: 593 Comm: v4l2src0:src Tainted: G W 5.16.0-rc4-62408-g32447129cb30-dirty #14
[ 65.590293] Hardware name: Radxa ROCK Pi 4B (DT)
[ 65.590696] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 65.591304] pc : vb2_start_streaming+0xd4/0x160 [videobuf2_common]
[ 65.591850] lr : vb2_start_streaming+0x6c/0x160 [videobuf2_common]
[ 65.592395] sp : ffff800012bc3ad0
[ 65.592685] x29: ffff800012bc3ad0 x28: 0000000000000000 x27: ffff800012bc3cd8
[ 65.593312] x26: 0000000000000000 x25: ffff00000d8a7800 x24: 0000000040045612
[ 65.593938] x23: ffff800011323000 x22: ffff800012bc3cd8 x21: ffff00000908a8b0
[ 65.594562] x20: ffff00000908a8c8 x19: 00000000fffffff4 x18: ffffffffffffffff
[ 65.595188] x17: 000000040044ffff x16: 00400034b5503510 x15: ffff800011323f78
[ 65.595813] x14: ffff000013163886 x13: ffff000013163885 x12: 00000000000002ce
[ 65.596439] x11: 0000000000000028 x10: 0000000000000001 x9 : 0000000000000228
[ 65.597064] x8 : 0101010101010101 x7 : 7f7f7f7f7f7f7f7f x6 : fefefeff726c5e78
[ 65.597690] x5 : ffff800012bc3990 x4 : 0000000000000000 x3 : ffff000009a34880
[ 65.598315] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000007cd99f0
[ 65.598940] Call trace:
[ 65.599155] vb2_start_streaming+0xd4/0x160 [videobuf2_common]
[ 65.599672] vb2_core_streamon+0x17c/0x1a8 [videobuf2_common]
[ 65.600179] vb2_streamon+0x54/0x88 [videobuf2_v4l2]
[ 65.600619] vb2_ioctl_streamon+0x54/0x60 [videobuf2_v4l2]
[ 65.601103] v4l_streamon+0x3c/0x50 [videodev]
[ 65.601521] __video_do_ioctl+0x1a4/0x428 [videodev]
[ 65.601977] video_usercopy+0x320/0x828 [videodev]
[ 65.602419] video_ioctl2+0x3c/0x58 [videodev]
[ 65.602830] v4l2_ioctl+0x60/0x90 [videodev]
[ 65.603227] __arm64_sys_ioctl+0xa8/0xe0
[ 65.603576] invoke_syscall+0x54/0x118
[ 65.603911] el0_svc_common.constprop.3+0x84/0x100
[ 65.604332] do_el0_svc+0x34/0xa0
[ 65.604625] el0_svc+0x1c/0x50
[ 65.604897] el0t_64_sync_handler+0x88/0xb0
[ 65.605264] el0t_64_sync+0x16c/0x170
[ 65.605587] ---[ end trace 578e0ba07742170d ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
block: don't delete queue kobject before its children
kobjects aren't supposed to be deleted before their child kobjects are
deleted. Apparently this is usually benign; however, a WARN will be
triggered if one of the child kobjects has a named attribute group:
sysfs group 'modes' not found for kobject 'crypto'
WARNING: CPU: 0 PID: 1 at fs/sysfs/group.c:278 sysfs_remove_group+0x72/0x80
...
Call Trace:
sysfs_remove_groups+0x29/0x40 fs/sysfs/group.c:312
__kobject_del+0x20/0x80 lib/kobject.c:611
kobject_cleanup+0xa4/0x140 lib/kobject.c:696
kobject_release lib/kobject.c:736 [inline]
kref_put include/linux/kref.h:65 [inline]
kobject_put+0x53/0x70 lib/kobject.c:753
blk_crypto_sysfs_unregister+0x10/0x20 block/blk-crypto-sysfs.c:159
blk_unregister_queue+0xb0/0x110 block/blk-sysfs.c:962
del_gendisk+0x117/0x250 block/genhd.c:610
Fix this by moving the kobject_del() and the corresponding
kobject_uevent() to the correct place. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix missing free nid in f2fs_handle_failed_inode
This patch fixes xfstests/generic/475 failure.
[ 293.680694] F2FS-fs (dm-1): May loss orphan inode, run fsck to fix.
[ 293.685358] Buffer I/O error on dev dm-1, logical block 8388592, async page read
[ 293.691527] Buffer I/O error on dev dm-1, logical block 8388592, async page read
[ 293.691764] sh (7615): drop_caches: 3
[ 293.691819] sh (7616): drop_caches: 3
[ 293.694017] Buffer I/O error on dev dm-1, logical block 1, async page read
[ 293.695659] sh (7618): drop_caches: 3
[ 293.696979] sh (7617): drop_caches: 3
[ 293.700290] sh (7623): drop_caches: 3
[ 293.708621] sh (7626): drop_caches: 3
[ 293.711386] sh (7628): drop_caches: 3
[ 293.711825] sh (7627): drop_caches: 3
[ 293.716738] sh (7630): drop_caches: 3
[ 293.719613] sh (7632): drop_caches: 3
[ 293.720971] sh (7633): drop_caches: 3
[ 293.727741] sh (7634): drop_caches: 3
[ 293.730783] sh (7636): drop_caches: 3
[ 293.732681] sh (7635): drop_caches: 3
[ 293.732988] sh (7637): drop_caches: 3
[ 293.738836] sh (7639): drop_caches: 3
[ 293.740568] sh (7641): drop_caches: 3
[ 293.743053] sh (7640): drop_caches: 3
[ 293.821889] ------------[ cut here ]------------
[ 293.824654] kernel BUG at fs/f2fs/node.c:3334!
[ 293.826226] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[ 293.828713] CPU: 0 PID: 7653 Comm: umount Tainted: G OE 5.17.0-rc1-custom #1
[ 293.830946] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
[ 293.832526] RIP: 0010:f2fs_destroy_node_manager+0x33f/0x350 [f2fs]
[ 293.833905] Code: e8 d6 3d f9 f9 48 8b 45 d0 65 48 2b 04 25 28 00 00 00 75 1a 48 81 c4 28 03 00 00 5b 41 5c 41 5d 41 5e 41 5f 5d c3 0f 0b
[ 293.837783] RSP: 0018:ffffb04ec31e7a20 EFLAGS: 00010202
[ 293.839062] RAX: 0000000000000001 RBX: ffff9df947db2eb8 RCX: 0000000080aa0072
[ 293.840666] RDX: 0000000000000000 RSI: ffffe86c0432a140 RDI: ffffffffc0b72a21
[ 293.842261] RBP: ffffb04ec31e7d70 R08: ffff9df94ca85780 R09: 0000000080aa0072
[ 293.843909] R10: ffff9df94ca85700 R11: ffff9df94e1ccf58 R12: ffff9df947db2e00
[ 293.845594] R13: ffff9df947db2ed0 R14: ffff9df947db2eb8 R15: ffff9df947db2eb8
[ 293.847855] FS: 00007f5a97379800(0000) GS:ffff9dfa77c00000(0000) knlGS:0000000000000000
[ 293.850647] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 293.852940] CR2: 00007f5a97528730 CR3: 000000010bc76005 CR4: 0000000000370ef0
[ 293.854680] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 293.856423] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 293.858380] Call Trace:
[ 293.859302] <TASK>
[ 293.860311] ? ttwu_do_wakeup+0x1c/0x170
[ 293.861800] ? ttwu_do_activate+0x6d/0xb0
[ 293.863057] ? _raw_spin_unlock_irqrestore+0x29/0x40
[ 293.864411] ? try_to_wake_up+0x9d/0x5e0
[ 293.865618] ? debug_smp_processor_id+0x17/0x20
[ 293.866934] ? debug_smp_processor_id+0x17/0x20
[ 293.868223] ? free_unref_page+0xbf/0x120
[ 293.869470] ? __free_slab+0xcb/0x1c0
[ 293.870614] ? preempt_count_add+0x7a/0xc0
[ 293.871811] ? __slab_free+0xa0/0x2d0
[ 293.872918] ? __wake_up_common_lock+0x8a/0xc0
[ 293.874186] ? __slab_free+0xa0/0x2d0
[ 293.875305] ? free_inode_nonrcu+0x20/0x20
[ 293.876466] ? free_inode_nonrcu+0x20/0x20
[ 293.877650] ? debug_smp_processor_id+0x17/0x20
[ 293.878949] ? call_rcu+0x11a/0x240
[ 293.880060] ? f2fs_destroy_stats+0x59/0x60 [f2fs]
[ 293.881437] ? kfree+0x1fe/0x230
[ 293.882674] f2fs_put_super+0x160/0x390 [f2fs]
[ 293.883978] generic_shutdown_super+0x7a/0x120
[ 293.885274] kill_block_super+0x27/0x50
[ 293.886496] kill_f2fs_super+0x7f/0x100 [f2fs]
[ 293.887806] deactivate_locked_super+0x35/0xa0
[ 293.889271] deactivate_super+0x40/0x50
[ 293.890513] cleanup_mnt+0x139/0x190
[ 293.891689] __cleanup_mnt+0x12/0x20
[ 293.892850] task_work_run+0x64/0xa0
[ 293.894035] exit_to_user_mode_prepare+0x1b7/
---truncated--- |
