| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-pf: Fix potential use after free in otx2_tc_add_flow()
This code calls kfree_rcu(new_node, rcu) and then dereferences "new_node"
and then dereferences it on the next line. Two lines later, we take
a mutex so I don't think this is an RCU safe region. Re-order it to do
the dereferences before queuing up the free. |
| In the Linux kernel, the following vulnerability has been resolved:
futex: Prevent use-after-free during requeue-PI
syzbot managed to trigger the following race:
T1 T2
futex_wait_requeue_pi()
futex_do_wait()
schedule()
futex_requeue()
futex_proxy_trylock_atomic()
futex_requeue_pi_prepare()
requeue_pi_wake_futex()
futex_requeue_pi_complete()
/* preempt */
* timeout/ signal wakes T1 *
futex_requeue_pi_wakeup_sync() // Q_REQUEUE_PI_LOCKED
futex_hash_put()
// back to userland, on stack futex_q is garbage
/* back */
wake_up_state(q->task, TASK_NORMAL);
In this scenario futex_wait_requeue_pi() is able to leave without using
futex_q::lock_ptr for synchronization.
This can be prevented by reading futex_q::task before updating the
futex_q::requeue_state. A reference on the task_struct is not needed
because requeue_pi_wake_futex() is invoked with a spinlock_t held which
implies a RCU read section.
Even if T1 terminates immediately after, the task_struct will remain valid
during T2's wake_up_state(). A READ_ONCE on futex_q::task before
futex_requeue_pi_complete() is enough because it ensures that the variable
is read before the state is updated.
Read futex_q::task before updating the requeue state, use it for the
following wakeup. |
| In the Linux kernel, the following vulnerability has been resolved:
futex: Use correct exit on failure from futex_hash_allocate_default()
copy_process() uses the wrong error exit path from futex_hash_allocate_default().
After exiting from futex_hash_allocate_default(), neither tasklist_lock
nor siglock has been acquired. The exit label bad_fork_core_free unlocks
both of these locks which is wrong.
The next exit label, bad_fork_cancel_cgroup, is the correct exit.
sched_cgroup_fork() did not allocate any resources that need to freed.
Use bad_fork_cancel_cgroup on error exit from futex_hash_allocate_default(). |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix wrong index reference in smb2_compound_op()
In smb2_compound_op(), the loop that processes each command's response
uses wrong indices when accessing response bufferes.
This incorrect indexing leads to improper handling of command results.
Also, if incorrectly computed index is greather than or equal to
MAX_COMPOUND, it can cause out-of-bounds accesses. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/osnoise: Fix slab-out-of-bounds in _parse_integer_limit()
When config osnoise cpus by write() syscall, the following KASAN splat may
be observed:
BUG: KASAN: slab-out-of-bounds in _parse_integer_limit+0x103/0x130
Read of size 1 at addr ffff88810121e3a1 by task test/447
CPU: 1 UID: 0 PID: 447 Comm: test Not tainted 6.17.0-rc6-dirty #288 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x55/0x70
print_report+0xcb/0x610
kasan_report+0xb8/0xf0
_parse_integer_limit+0x103/0x130
bitmap_parselist+0x16d/0x6f0
osnoise_cpus_write+0x116/0x2d0
vfs_write+0x21e/0xcc0
ksys_write+0xee/0x1c0
do_syscall_64+0xa8/0x2a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
This issue can be reproduced by below code:
const char *cpulist = "1";
int fd=open("/sys/kernel/debug/tracing/osnoise/cpus", O_WRONLY);
write(fd, cpulist, strlen(cpulist));
Function bitmap_parselist() was called to parse cpulist, it require that
the parameter 'buf' must be terminated with a '\0' or '\n'. Fix this issue
by adding a '\0' to 'buf' in osnoise_cpus_write(). |
| In the Linux kernel, the following vulnerability has been resolved:
i40e: add validation for ring_len param
The `ring_len` parameter provided by the virtual function (VF)
is assigned directly to the hardware memory context (HMC) without
any validation.
To address this, introduce an upper boundary check for both Tx and Rx
queue lengths. The maximum number of descriptors supported by the
hardware is 8k-32.
Additionally, enforce alignment constraints: Tx rings must be a multiple
of 8, and Rx rings must be a multiple of 32. |
| In the Linux kernel, the following vulnerability has been resolved:
i40e: fix idx validation in i40e_validate_queue_map
Ensure idx is within range of active/initialized TCs when iterating over
vf->ch[idx] in i40e_validate_queue_map(). |
| In the Linux kernel, the following vulnerability has been resolved:
i40e: fix idx validation in config queues msg
Ensure idx is within range of active/initialized TCs when iterating over
vf->ch[idx] in i40e_vc_config_queues_msg(). |
| In the Linux kernel, the following vulnerability has been resolved:
i40e: fix input validation logic for action_meta
Fix condition to check 'greater or equal' to prevent OOB dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
i40e: fix validation of VF state in get resources
VF state I40E_VF_STATE_ACTIVE is not the only state in which
VF is actually active so it should not be used to determine
if a VF is allowed to obtain resources.
Use I40E_VF_STATE_RESOURCES_LOADED that is set only in
i40e_vc_get_vf_resources_msg() and cleared during reset. |
| In the Linux kernel, the following vulnerability has been resolved:
i40e: add max boundary check for VF filters
There is no check for max filters that VF can request. Add it. |
| In the Linux kernel, the following vulnerability has been resolved:
fbcon: fix integer overflow in fbcon_do_set_font
Fix integer overflow vulnerabilities in fbcon_do_set_font() where font
size calculations could overflow when handling user-controlled font
parameters.
The vulnerabilities occur when:
1. CALC_FONTSZ(h, pitch, charcount) performs h * pith * charcount
multiplication with user-controlled values that can overflow.
2. FONT_EXTRA_WORDS * sizeof(int) + size addition can also overflow
3. This results in smaller allocations than expected, leading to buffer
overflows during font data copying.
Add explicit overflow checking using check_mul_overflow() and
check_add_overflow() kernel helpers to safety validate all size
calculations before allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Fix race during abort for file descriptors
fput() doesn't actually call file_operations release() synchronously, it
puts the file on a work queue and it will be released eventually.
This is normally fine, except for iommufd the file and the iommufd_object
are tied to gether. The file has the object as it's private_data and holds
a users refcount, while the object is expected to remain alive as long as
the file is.
When the allocation of a new object aborts before installing the file it
will fput() the file and then go on to immediately kfree() the obj. This
causes a UAF once the workqueue completes the fput() and tries to
decrement the users refcount.
Fix this by putting the core code in charge of the file lifetime, and call
__fput_sync() during abort to ensure that release() is called before
kfree. __fput_sync() is a bit too tricky to open code in all the object
implementations. Instead the objects tell the core code where the file
pointer is and the core will take care of the life cycle.
If the object is successfully allocated then the file will hold a users
refcount and the iommufd_object cannot be destroyed.
It is worth noting that close(); ioctl(IOMMU_DESTROY); doesn't have an
issue because close() is already using a synchronous version of fput().
The UAF looks like this:
BUG: KASAN: slab-use-after-free in iommufd_eventq_fops_release+0x45/0xc0 drivers/iommu/iommufd/eventq.c:376
Write of size 4 at addr ffff888059c97804 by task syz.0.46/6164
CPU: 0 UID: 0 PID: 6164 Comm: syz.0.46 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xcd/0x630 mm/kasan/report.c:482
kasan_report+0xe0/0x110 mm/kasan/report.c:595
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0x100/0x1b0 mm/kasan/generic.c:189
instrument_atomic_read_write include/linux/instrumented.h:96 [inline]
atomic_fetch_sub_release include/linux/atomic/atomic-instrumented.h:400 [inline]
__refcount_dec include/linux/refcount.h:455 [inline]
refcount_dec include/linux/refcount.h:476 [inline]
iommufd_eventq_fops_release+0x45/0xc0 drivers/iommu/iommufd/eventq.c:376
__fput+0x402/0xb70 fs/file_table.c:468
task_work_run+0x14d/0x240 kernel/task_work.c:227
resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
exit_to_user_mode_loop+0xeb/0x110 kernel/entry/common.c:43
exit_to_user_mode_prepare include/linux/irq-entry-common.h:225 [inline]
syscall_exit_to_user_mode_work include/linux/entry-common.h:175 [inline]
syscall_exit_to_user_mode include/linux/entry-common.h:210 [inline]
do_syscall_64+0x41c/0x4c0 arch/x86/entry/syscall_64.c:100
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| The Dynamically Display Posts plugin for WordPress is vulnerable to SQL Injection via the 'tax_query' parameter in all versions up to, and including, 1.1 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: Initialization of the dangling pointer occurring in vsk->trans
During loopback communication, a dangling pointer can be created in
vsk->trans, potentially leading to a Use-After-Free condition. This
issue is resolved by initializing vsk->trans to NULL. |
| A flaw was found in libssh versions built with OpenSSL versions older than 3.0, specifically in the ssh_kdf() function responsible for key derivation. Due to inconsistent interpretation of return values where OpenSSL uses 0 to indicate failure and libssh uses 0 for success—the function may mistakenly return a success status even when key derivation fails. This results in uninitialized cryptographic key buffers being used in subsequent communication, potentially compromising SSH sessions' confidentiality, integrity, and availability. |
| The WPBakery Page Builder plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the vc_custom_heading shortcode in all versions up to, and including, 8.6.1. This is due to insufficient restriction of allowed HTML tags and improper sanitization of user-supplied attributes in the font_container parameter. This makes it possible for authenticated attackers with contributor-level access or higher to inject arbitrary web scripts in posts that will execute whenever a user accesses an injected page via the vc_custom_heading shortcode with malicious tag and text attributes granted they have access to use WPBakery shortcodes. |
| An low privileged remote attacker with an account for the Web-based management can change the system configuration to perform a command injection as root, resulting in a total loss of confidentiality, availability and integrity due to improper control of generation of code ('Code Injection'). |
| The Ova Advent plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's shortcodes in all versions up to, and including, 1.1.7 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The Lisfinity Core - Lisfinity Core plugin used for pebas® Lisfinity WordPress theme plugin for WordPress is vulnerable to privilege escalation in all versions up to, and including, 1.4.0. This is due to the plugin assigning the editor role by default. While limitations with respect to capabilities are put in place, use of the API is not restricted. This vulnerability can be leveraged together with CVE-2025-6038 to obtain admin privileges. |
