In the Linux kernel, the following vulnerability has been resolved:
iommufd: Fix race during abort for file descriptors
fput() doesn't actually call file_operations release() synchronously, it
puts the file on a work queue and it will be released eventually.
This is normally fine, except for iommufd the file and the iommufd_object
are tied to gether. The file has the object as it's private_data and holds
a users refcount, while the object is expected to remain alive as long as
the file is.
When the allocation of a new object aborts before installing the file it
will fput() the file and then go on to immediately kfree() the obj. This
causes a UAF once the workqueue completes the fput() and tries to
decrement the users refcount.
Fix this by putting the core code in charge of the file lifetime, and call
__fput_sync() during abort to ensure that release() is called before
kfree. __fput_sync() is a bit too tricky to open code in all the object
implementations. Instead the objects tell the core code where the file
pointer is and the core will take care of the life cycle.
If the object is successfully allocated then the file will hold a users
refcount and the iommufd_object cannot be destroyed.
It is worth noting that close(); ioctl(IOMMU_DESTROY); doesn't have an
issue because close() is already using a synchronous version of fput().
The UAF looks like this:
BUG: KASAN: slab-use-after-free in iommufd_eventq_fops_release+0x45/0xc0 drivers/iommu/iommufd/eventq.c:376
Write of size 4 at addr ffff888059c97804 by task syz.0.46/6164
CPU: 0 UID: 0 PID: 6164 Comm: syz.0.46 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xcd/0x630 mm/kasan/report.c:482
kasan_report+0xe0/0x110 mm/kasan/report.c:595
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0x100/0x1b0 mm/kasan/generic.c:189
instrument_atomic_read_write include/linux/instrumented.h:96 [inline]
atomic_fetch_sub_release include/linux/atomic/atomic-instrumented.h:400 [inline]
__refcount_dec include/linux/refcount.h:455 [inline]
refcount_dec include/linux/refcount.h:476 [inline]
iommufd_eventq_fops_release+0x45/0xc0 drivers/iommu/iommufd/eventq.c:376
__fput+0x402/0xb70 fs/file_table.c:468
task_work_run+0x14d/0x240 kernel/task_work.c:227
resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
exit_to_user_mode_loop+0xeb/0x110 kernel/entry/common.c:43
exit_to_user_mode_prepare include/linux/irq-entry-common.h:225 [inline]
syscall_exit_to_user_mode_work include/linux/entry-common.h:175 [inline]
syscall_exit_to_user_mode include/linux/entry-common.h:210 [inline]
do_syscall_64+0x41c/0x4c0 arch/x86/entry/syscall_64.c:100
entry_SYSCALL_64_after_hwframe+0x77/0x7f
iommufd: Fix race during abort for file descriptors
fput() doesn't actually call file_operations release() synchronously, it
puts the file on a work queue and it will be released eventually.
This is normally fine, except for iommufd the file and the iommufd_object
are tied to gether. The file has the object as it's private_data and holds
a users refcount, while the object is expected to remain alive as long as
the file is.
When the allocation of a new object aborts before installing the file it
will fput() the file and then go on to immediately kfree() the obj. This
causes a UAF once the workqueue completes the fput() and tries to
decrement the users refcount.
Fix this by putting the core code in charge of the file lifetime, and call
__fput_sync() during abort to ensure that release() is called before
kfree. __fput_sync() is a bit too tricky to open code in all the object
implementations. Instead the objects tell the core code where the file
pointer is and the core will take care of the life cycle.
If the object is successfully allocated then the file will hold a users
refcount and the iommufd_object cannot be destroyed.
It is worth noting that close(); ioctl(IOMMU_DESTROY); doesn't have an
issue because close() is already using a synchronous version of fput().
The UAF looks like this:
BUG: KASAN: slab-use-after-free in iommufd_eventq_fops_release+0x45/0xc0 drivers/iommu/iommufd/eventq.c:376
Write of size 4 at addr ffff888059c97804 by task syz.0.46/6164
CPU: 0 UID: 0 PID: 6164 Comm: syz.0.46 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xcd/0x630 mm/kasan/report.c:482
kasan_report+0xe0/0x110 mm/kasan/report.c:595
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0x100/0x1b0 mm/kasan/generic.c:189
instrument_atomic_read_write include/linux/instrumented.h:96 [inline]
atomic_fetch_sub_release include/linux/atomic/atomic-instrumented.h:400 [inline]
__refcount_dec include/linux/refcount.h:455 [inline]
refcount_dec include/linux/refcount.h:476 [inline]
iommufd_eventq_fops_release+0x45/0xc0 drivers/iommu/iommufd/eventq.c:376
__fput+0x402/0xb70 fs/file_table.c:468
task_work_run+0x14d/0x240 kernel/task_work.c:227
resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
exit_to_user_mode_loop+0xeb/0x110 kernel/entry/common.c:43
exit_to_user_mode_prepare include/linux/irq-entry-common.h:225 [inline]
syscall_exit_to_user_mode_work include/linux/entry-common.h:175 [inline]
syscall_exit_to_user_mode include/linux/entry-common.h:210 [inline]
do_syscall_64+0x41c/0x4c0 arch/x86/entry/syscall_64.c:100
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Metrics
Affected Vendors & Products
No data.
No data.
No data.
No data.
Advisories
No advisories yet.
Fixes
Solution
No solution given by the vendor.
Workaround
No workaround given by the vendor.
References
History
Thu, 16 Oct 2025 12:15:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| References |
| |
| Metrics |
threat_severity
|
cvssV3_1
|
Wed, 15 Oct 2025 08:00:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Description | In the Linux kernel, the following vulnerability has been resolved: iommufd: Fix race during abort for file descriptors fput() doesn't actually call file_operations release() synchronously, it puts the file on a work queue and it will be released eventually. This is normally fine, except for iommufd the file and the iommufd_object are tied to gether. The file has the object as it's private_data and holds a users refcount, while the object is expected to remain alive as long as the file is. When the allocation of a new object aborts before installing the file it will fput() the file and then go on to immediately kfree() the obj. This causes a UAF once the workqueue completes the fput() and tries to decrement the users refcount. Fix this by putting the core code in charge of the file lifetime, and call __fput_sync() during abort to ensure that release() is called before kfree. __fput_sync() is a bit too tricky to open code in all the object implementations. Instead the objects tell the core code where the file pointer is and the core will take care of the life cycle. If the object is successfully allocated then the file will hold a users refcount and the iommufd_object cannot be destroyed. It is worth noting that close(); ioctl(IOMMU_DESTROY); doesn't have an issue because close() is already using a synchronous version of fput(). The UAF looks like this: BUG: KASAN: slab-use-after-free in iommufd_eventq_fops_release+0x45/0xc0 drivers/iommu/iommufd/eventq.c:376 Write of size 4 at addr ffff888059c97804 by task syz.0.46/6164 CPU: 0 UID: 0 PID: 6164 Comm: syz.0.46 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xcd/0x630 mm/kasan/report.c:482 kasan_report+0xe0/0x110 mm/kasan/report.c:595 check_region_inline mm/kasan/generic.c:183 [inline] kasan_check_range+0x100/0x1b0 mm/kasan/generic.c:189 instrument_atomic_read_write include/linux/instrumented.h:96 [inline] atomic_fetch_sub_release include/linux/atomic/atomic-instrumented.h:400 [inline] __refcount_dec include/linux/refcount.h:455 [inline] refcount_dec include/linux/refcount.h:476 [inline] iommufd_eventq_fops_release+0x45/0xc0 drivers/iommu/iommufd/eventq.c:376 __fput+0x402/0xb70 fs/file_table.c:468 task_work_run+0x14d/0x240 kernel/task_work.c:227 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop+0xeb/0x110 kernel/entry/common.c:43 exit_to_user_mode_prepare include/linux/irq-entry-common.h:225 [inline] syscall_exit_to_user_mode_work include/linux/entry-common.h:175 [inline] syscall_exit_to_user_mode include/linux/entry-common.h:210 [inline] do_syscall_64+0x41c/0x4c0 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x77/0x7f | |
| Title | iommufd: Fix race during abort for file descriptors | |
| References |
|
MITRE
Status: PUBLISHED
Assigner: Linux
Published:
Updated: 2025-10-15T07:55:50.843Z
Reserved: 2025-04-16T07:20:57.149Z
Link: CVE-2025-39966
Vulnrichment
No data.
NVD
Status : Awaiting Analysis
Published: 2025-10-15T08:15:34.043
Modified: 2025-10-16T15:29:11.563
Link: CVE-2025-39966
Redhat
OpenCVE Enrichment
No data.