| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix OOB write in QUERY_INFO for compound requests
When a compound request such as READ + QUERY_INFO(Security) is received,
and the first command (READ) consumes most of the response buffer,
ksmbd could write beyond the allocated buffer while building a security
descriptor.
The root cause was that smb2_get_info_sec() checked buffer space using
ppntsd_size from xattr, while build_sec_desc() often synthesized a
significantly larger descriptor from POSIX ACLs.
This patch introduces smb_acl_sec_desc_scratch_len() to accurately
compute the final descriptor size beforehand, performs proper buffer
checking with smb2_calc_max_out_buf_len(), and uses exact-sized
allocation + iov pinning. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix heap overflow in NFSv4.0 LOCK replay cache
The NFSv4.0 replay cache uses a fixed 112-byte inline buffer
(rp_ibuf[NFSD4_REPLAY_ISIZE]) to store encoded operation responses.
This size was calculated based on OPEN responses and does not account
for LOCK denied responses, which include the conflicting lock owner as
a variable-length field up to 1024 bytes (NFS4_OPAQUE_LIMIT).
When a LOCK operation is denied due to a conflict with an existing lock
that has a large owner, nfsd4_encode_operation() copies the full encoded
response into the undersized replay buffer via read_bytes_from_xdr_buf()
with no bounds check. This results in a slab-out-of-bounds write of up
to 944 bytes past the end of the buffer, corrupting adjacent heap memory.
This can be triggered remotely by an unauthenticated attacker with two
cooperating NFSv4.0 clients: one sets a lock with a large owner string,
then the other requests a conflicting lock to provoke the denial.
We could fix this by increasing NFSD4_REPLAY_ISIZE to allow for a full
opaque, but that would increase the size of every stateowner, when most
lockowners are not that large.
Instead, fix this by checking the encoded response length against
NFSD4_REPLAY_ISIZE before copying into the replay buffer. If the
response is too large, set rp_buflen to 0 to skip caching the replay
payload. The status is still cached, and the client already received the
correct response on the original request. |
| Memory safety bug fixed in Firefox 152. This vulnerability was fixed in Firefox 152 and Thunderbird 152. |
| vantage6 is an open-source infrastructure for privacy preserving analysis. Versions prior to 5.0.0 provide an initial user with username `root` and password `root`. This is not ideal because attackers know that almost all vantage6 servers have a user with username `root` that probably has admin rights, and the initial password is very weak and it is possible that administrators forget to reset it. Version 5.0.0 fixes the issue. As a workaround, it is possible to delete the `root` user after it has been used to create other users. |
| ThingsBoard contains a prototype pollution vulnerability which may lead to arbitrary code execution within a sandboxed context by a user who can log in to the affected product with the tenant administrator privilege (TENANT_ADMIN). |
| LiquidJS is a Shopify/GitHub Pages compatible template engine written in pure JavaScript. In versions 10.25.7 and below, the built-in strip_html filter uses a regex containing four flawed lazy-quantified alternatives, leading to ReDoS via quadratic backtracking. When the input contains many <script, <style, or <!-- opener tokens without matching closers, the V8 regex engine performs O(N²) backtracking, blocking the Node.js event loop. A single ~350 KB request ('<script'.repeat(50000)) stalls the process for ~10 seconds; cost grows quadratically with input size. The default memoryLimit: Infinity does not bound regex CPU, and even when configured strip_html only charges str.length to the limit — the regex itself runs unbounded. A single unauthenticated request containing crafted untrusted input can cause severe event-loop blocking and CPU amplification that saturates Node.js workers while bypassing memoryLimit protections. This issue has been fixed in version 10.26.0. |
| Heap buffer overflow in WebRTC in Google Chrome prior to 149.0.7827.155 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) |
| LibreOffice Calc compiles cell formulas when opening a spreadsheet. A heap buffer overflow existed when compiling a very long formula made up of many opening tokens. The array that tracks nesting depth was allocated one element too small for that worst case, so such a formula wrote one element past its end. In fixed versions the array is sized to hold the largest possible nesting. |
| A format string vulnerability has been found in the "alias" parameter of the Serial Param configuration page in the NPort W2150A-W4/W2250A-W4 Series version 1.5 and prior. This vulnerability stems from insufficient input validation and improper handling of externally supplied format strings. An attacker could exploit this vulnerability by sending crafted input to the web service, causing unintended memory disclosure. Successful exploitation may allow an attacker to leak sensitive memory contents and determine critical memory addresses, potentially bypassing Address Space Layout Randomization (ASLR) protections. |
| When generating an ICMP Destination Unreachable or Packet Too Big response, the handler copies a portion of the original packet into the ICMP error body using the IP header's self-declared total length (ip_tot_len for IPv4, ip6_plen for IPv6) without validating it against the actual packet buffer size. A VM can send a short packet with an inflated IP length field that triggers an ICMP error (e.g., by hitting a reject ACL), causing ovn-controller to read heap memory beyond the valid packet data and include it in the ICMP response sent back to the VM. |
| Incorrect boundary conditions in the Graphics: CanvasWebGL component. This vulnerability was fixed in Firefox 152, Firefox ESR 140.12, Thunderbird 152, and Thunderbird 140.12. |
| Incorrect boundary conditions in the Internationalization component. This vulnerability was fixed in Firefox ESR 140.12, Firefox ESR 115.37, and Thunderbird 140.12. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/umad: Reject negative data_len in ib_umad_write
ib_umad_write computes data_len from user-controlled count and the
MAD header sizes. With a mismatched user MAD header size and RMPP
header length, data_len can become negative and reach ib_create_send_mad().
This can make the padding calculation exceed the segment size and trigger
an out-of-bounds memset in alloc_send_rmpp_list().
Add an explicit check to reject negative data_len before creating the
send buffer.
KASAN splat:
[ 211.363464] BUG: KASAN: slab-out-of-bounds in ib_create_send_mad+0xa01/0x11b0
[ 211.364077] Write of size 220 at addr ffff88800c3fa1f8 by task spray_thread/102
[ 211.365867] ib_create_send_mad+0xa01/0x11b0
[ 211.365887] ib_umad_write+0x853/0x1c80 |
| In the Linux kernel, the following vulnerability has been resolved:
exit: prevent preemption of oopsing TASK_DEAD task
When an already-exiting task oopses, make_task_dead() currently calls
do_task_dead() with preemption enabled. That is forbidden:
do_task_dead() calls __schedule(), which has a comment saying "WARNING:
must be called with preemption disabled!".
If an oopsing task is preempted in do_task_dead(), between becoming
TASK_DEAD and entering the scheduler explicitly, bad things happen:
finish_task_switch() assumes that once the scheduler has switched away
from a TASK_DEAD task, the task can never run again and its stack is no
longer needed; but that assumption apparently doesn't hold if the dead
task was preempted (the SM_PREEMPT case).
This means that the scheduler ends up repeatedly dropping references on
the dead task's stack, which can lead to use-after-free or double-free
of the entire task stack; in other words, two tasks can end up running
on the same stack, resulting in various kinds of memory corruption.
(This does not just affect "recursively oopsing" tasks; it is enough to
oops once during task exit, for example in a file_operations::release
handler) |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: fw_tracer, Validate format string parameters
Add validation for format string parameters in the firmware tracer to
prevent potential security vulnerabilities and crashes from malformed
format strings received from firmware.
The firmware tracer receives format strings from the device firmware and
uses them to format trace messages. Without proper validation, bad
firmware could provide format strings with invalid format specifiers
(e.g., %s, %p, %n) that could lead to crashes, or other undefined
behavior.
Add mlx5_tracer_validate_params() to validate that all format specifiers
in trace strings are limited to safe integer/hex formats (%x, %d, %i,
%u, %llx, %lx, etc.). Reject strings containing other format types that
could be used to access arbitrary memory or cause crashes.
Invalid format strings are added to the trace output for visibility with
"BAD_FORMAT: " prefix. |
| A security vulnerability has been detected in D-Link DCS-935L 1.10.01. This issue affects the function snprintf of the file /web/cgi-bin/greece/rhea of the component HTTP Handler. Such manipulation of the argument data leads to format string. The attack may be launched remotely. The exploit has been disclosed publicly and may be used. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pt5161l) Fix bugs in pt5161l_read_block_data()
Fix two bugs in pt5161l_read_block_data():
1. Buffer overrun: The local buffer rbuf is declared as u8 rbuf[24],
but i2c_smbus_read_block_data() can return up to
I2C_SMBUS_BLOCK_MAX (32) bytes. The i2c-core copies the data into
the caller's buffer before the return value can be checked, so
the post-read length validation does not prevent a stack overrun
if a device returns more than 24 bytes. Resize the buffer to
I2C_SMBUS_BLOCK_MAX.
2. Unexpected positive return on length mismatch: When all three
retries are exhausted because the device returns data with an
unexpected length, i2c_smbus_read_block_data() returns a positive
byte count. The function returns this directly, and callers treat
any non-negative return as success, processing stale or incomplete
buffer contents. Return -EIO when retries are exhausted with a
positive return value, preserving the negative error code on I2C
failure. |
| i18next-http-middleware is a middleware to be used with Node.js web frameworks like express or Fastify and also for Deno. In versions prior to 3.9.7, the missingKeyHandler blocked the literal request-body keys __proto__, constructor, and prototype (added in 3.9.3, see GHSA-5fgg-jcpf-8jjw), but did not reject dotted variants such as "__proto__.polluted". Downstream backends that split the missing-key string on a configured keySeparator (notably i18next-fs-backend ≤ 2.6.5) hand these keys to an unguarded setPath() walker that writes to Object.prototype. Applications that expose missingKeyHandler to untrusted input AND use i18next-fs-backend ≤ 2.6.5 are directly exploitable for remote prototype pollution. Other downstream backends that split the missing-key string the same way may be similarly affected. Depending on the host application, polluted prototype properties may cause crashes, corrupted translation behaviour, configuration poisoning, or bypasses of property-based security checks. This issue has been fixed in version 3.9.7. If developers cannot upgrade immediately, they should do the following: do not expose missingKeyHandler to untrusted users (mount it behind authentication, or remove the route), add a request-body filter ahead of the handler that rejects any top-level key containing __proto__, constructor, or prototype after splitting on their configured keySeparator, and disable missing-key persistence (saveMissing: false) when accepting writes from untrusted input. |
| An
authenticated format string vulnerability exists in the ONVIF service of Tapo
C110 v2 due to improper handling of user-controlled input. Externally controlled data is interpreted as
a format string, which can be used to manipulate stack memory, including
control flow data such as return addresses.
A remote
authenticated attacker may redirect execution flow to existing internal
functions, triggering an unauthorized factory reset, leading to loss of
configuration, deletion of stored credentials and service disruption. |
| LibreOffice can import presentations in the legacy binary PPT format. A stack buffer overflow existed when importing a colour-replacement record. Two fixed-size colour tables were filled from the file, but the write position was not reset between the two passes over the record, so a file whose combined colour counts exceeded the table size wrote past the end of the tables on the stack. In fixed versions the unused second pass is no longer read into those tables. |
