| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was identified in rathena FluxCP up to 98cd4b8fd83228c11b36fb3d097b8e0f7c105a8d. This issue affects the function verifyiprange of the file lib/Flux/PaymentNotifyRequest.php of the component PayPal IPN Handler. The manipulation of the argument X-Real-IP leads to origin validation error. The attack is possible to be carried out remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A flaw was found in BusyBox dpkg. The write_status_file() function does not reset a field cursor between package stanzas. When two packages are removed in a single invocation and the first stanza is larger than the second, the second package stanza can be dropped from the status file, causing limited data corruption. |
| A vulnerability has been found in Edimax BR-6208AC 1.32. This vulnerability affects unknown code of the component Virtual Server Page. The manipulation leads to cross site scripting. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was found in Oray Pugongying X5 Pro 7.6.1. This affects an unknown part of the component Dnsmasq. Performing a manipulation results in crlf injection. Remote exploitation of the attack is possible. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability has been found in Oray Pugongying X5 Pro 7.6.1. Affected by this issue is the function plugin_init of the file /tmp/upload_files of the component PPPoE WAN Setting Handler. Such manipulation of the argument pppd_options leads to unrestricted upload. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| SOEM version 2.0.0 and earlier contains multiple vulnerabilities in frame processing where a malicious device can cause the master to read data outside allocated buffers. The software uses length and offset values from device messages without validating them against buffer sizes. This can cause the master to access invalid memory locations, potentially disclosing sensitive information or causing crashes. |
| SOEM version 2.0.0 and earlier contains a vulnerability in multi-segment data transfers where a malicious device can overflow memory buffers. The software checks the total size only once at the beginning, but doesn't track the cumulative size as multiple segments arrive. An attacker can declare a small initial size to pass validation, then send additional segments that exceed the allocated buffer. This allows the attacker to write controlled data beyond buffer boundaries, potentially enabling code execution. |
| MISP mispguard is a security filtering proxy that inspects and blocks MISP feed responses based on configured rules. The process_feed_response method in src/mispguard.py was responsible for evaluating feed responses before they reached the MISP instance. The original logic only explicitly handled the case where the HTTP status code was not 200 by passing the response through without filtering, on the assumption that non-200 responses would not carry ingestible event data. However, HTTP 2xx status codes other than 200 (such as 201 Created, 203 Non-Authoritative Information, and 206 Partial Content) were also passed through unfiltered. Because MISP may still ingest content from these responses, a malicious or compromised feed host could return a 203 or 206 status code with arbitrary content, effectively bypassing all of mispguard's filtering rules. This allowed unfiltered or malicious feed data to be ingested into the MISP instance, undermining the security controls that mispguard is designed to enforce. The vulnerability requires the attacker to control or compromise a feed endpoint configured in the MISP instance. No authentication or user interaction is required beyond the feed polling mechanism already in place. |
| SOEM version 2.0.0 and earlier contains vulnerabilities where a malicious device on the network can send specially crafted messages that cause the master to write data outside allocated memory boundaries. The software performs arithmetic on message length values without proper validation, allowing negative or extremely large values to bypass safety checks. This can corrupt memory and potentially allow an attacker to execute arbitrary code on the master system. |
| A vulnerability was detected in Oray Pugongying X5 Pro 7.6.1. Affected is an unknown function of the file /etc/ipsec.conf of the component IPsec Policy Handler. The manipulation of the argument secproto results in crlf injection. The attack can be launched remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Incorrect Privilege Assignment vulnerability in Kodezen LLC aBlocks ablocks allows Privilege Escalation.This issue affects aBlocks: from n/a before 2.9.1. |
| A security vulnerability has been detected in Oray Pugongying X5 Pro 7.6.1. This impacts an unknown function of the component Dnsmasq. The manipulation of the argument rent_time leads to crlf injection. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| The Payment Gateway WordPress plugin through 2.2.0 does not ensure a shared secret is configured before using it to authenticate the bank's payment-notification callback, allowing unauthenticated attackers to forge a valid notification and mark any WooCommerce order as paid on installs where the secret has not been set, and the same callback lets them move any pending order to a failed state whether or not the secret is configured. |
| A security flaw has been discovered in Oray Pugongying X5 Pro 7.6.1. The impacted element is an unknown function of the component Ser2net. Performing a manipulation of the argument regmsg results in crlf injection. It is possible to initiate the attack remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
dm: fix reading free memory in do_resume
When do_resume calls dm_table_get_mode(new_map), the call is done without
holding any locks (it only holds a reference to the md). It may be
possible that another concurrent ioctl on the same device will swap table
after dm_swap_table and before dm_table_get_mode. In this case,
dm_table_get_mode(new_map) reads freed memory.
This race condition was triggered by syzbot.
This commit fixes the race by reading mode of the new table before
dm_swap_table. Note that new_map is also passed to dm_ima_need_measure,
but this function doesn't attempt to dereference it, so this call should
be safe.
Note that this is not a security bug because only root can trigger it and
the commonly used tools such as lvm or cryptsetup do not call the ioctls
concurrently, so that they can't trigger it acceidentally. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: steam: Rearrange teardown sequence
This fixes a narrow window during the teardown sequence where callbacks
could still be scheduled during cleanup that would then have a dangling
pointer to the now-freed steam struct.
This also puts work canceling for rumble and mode switch in
steam_unregister, as that shouldn't persist while the client hdev is open. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: steam: Refactor registration
This refactors and simplifies the registration/unregistration flow. Since
we now only perform registration when the client isn't opened anymore, the
logic for handling that can be removed, and the rest of the function
streamlined.
We also remove the previous assumption that we have a serial number to show
we're registered, replacing it with a single purpose boolean.
In a previous refactor the code for unregistering a battery if later
registration steps failed was accidentally left out. As a result, a
lingering power_supply object could get left over after the steam object
was torn down. This is also fixed here. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Build the cid tables privately and publish them with RCU
The cid tables are visible to the cid kfuncs while being modified: the
first enable publishes the global pointers before filling them,
ops.init_cids() overrides rewrite them in place, and re-enables rebuild
them in place. A racing TRACING or SYSCALL program can read unfilled
entries, including uninitialized memory in the kmalloc'd tables, or torn
topo updates.
Tie the tables' lifetimes to the root sched instead: each root enable
builds a fresh set privately and publishes the per-table __rcu globals once
the layout is final, and root disable unpublishes and RCU-frees the set. A
non-NULL global is now always a fully built table which stays valid for the
reader's RCU read section, and lookups stay two loads. Kfuncs treat NULL as
no-mapping, also after the scheduler exits instead of reporting the stale
last mapping.
The cid kfuncs are available whether the root scheduler is cid-form or
cpu-form, the latter to allow gradual migration to cids. Every root
therefore builds and publishes a default mapping.
Every reader must either be gated on scheduler liveness or NULL-check
inside an RCU read section. Fix the two kfuncs that were neither:
scx_bpf_this_cid() read the table with no RCU or preemption protection and
scx_bpf_task_cid() relied on KF_RCU, which doesn't put a sleepable program
in an RCU read section. The hotplug callbacks are instead serialized by
retiring the tables inside the cpus_read_lock() section that clears
scx_root.
v2: Document why every root builds the tables (desc + cid.c comment). |
| In the Linux kernel, the following vulnerability has been resolved:
perf/core: Check kernel access when kernel callchains are requested
perf_event_open() currently gates perf_allow_kernel() only on
!attr.exclude_kernel.
However, users can still request kernel callchain collection with
attr.exclude_callchain_kernel == 0 even when attr.exclude_kernel == 1.
That still requires kernel profiling privilege, but the existing check
does not enforce it.
Update the permission check to call perf_allow_kernel() when either
kernel sampling is requested or kernel callchains are requested.
This keeps permission checks aligned with requested data and prevents
unprivileged use of kernel callchain capture. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Remove sink usage from DPMS
[Why]
stream->sink is optional and can be null, so should always be checked
before dereference. Additionally, most of its usage in DPMS sequences
is for stream->sink->link, which can be replaced with stream->link,
as the two should always be the same.
[How]
* Replace stream->sink->link in DPMS on/off
* Add assert to USB4 BW allocation where sink is required
* Avoid inconsistencies in resource access, e.g. don't repeat
stream->link after it was already saved to a local variable
* Pull out effective VPG calculation to helper getter
* Formatting fixes |
