| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| SimpleBLE is a cross-platform library and bindings for Bluetooth Low Energy (BLE). Prior to version 0.14.0, there are multiple stack-based buffer overflow vulnerabilities in SimpleBLE. There is a stack overflow vulnerability in the dongl backend’s Protocol::simpleble_write function (local, caller-controlled input). A stack overflow vulnerability when processing manufacturer-specific data in BLE advertisements (remote, no pairing or connection required). Lastly, a stack overflow vulnerability when processing service data in BLE advertisements (remote, no pairing or connection required). This issue has been patched in version 0.14.0. |
| Use after free in Bluetooth in Google Chrome on Windows prior to 149.0.7827.103 allowed a remote attacker who convinced a user to engage in specific UI gestures to execute arbitrary code via a crafted HTML page. (Chromium security severity: Critical) |
| Insufficient policy enforcement in Web Bluetooth in Google Chrome prior to 149.0.7827.53 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: Low) |
| Use after free in Bluetooth in Google Chrome on Mac prior to 149.0.7827.103 allowed a remote attacker to execute arbitrary code via a malicious peripheral. (Chromium security severity: Critical) |
| Use after free in Bluetooth in Google Chrome on Mac prior to 149.0.7827.103 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: Critical) |
| Use after free in Bluetooth in Google Chrome on Mac prior to 149.0.7827.103 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High) |
| Use after free in Bluetooth in Google Chrome on Mac prior to 149.0.7827.103 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High) |
| A remote, unauthenticated BLE peer can trigger a 2-byte out-of-bounds write in the Bluetooth host during L2CAP LE CoC SDU reassembly. When the application enables segmentation (via chan_ops.alloc_buf) and the chosen RX pool has a user_data_size smaller than 2 bytes, the segmentation counter stored in the net_buf user_data area is written out of bounds in l2cap_chan_le_recv_seg (subsys/bluetooth/host/l2cap.c). The observed effects are an AddressSanitizer abort and, without ASan, heap corruption / fatal error. |
| In the Linux kernel, the following vulnerability has been resolved:
media: videobuf2: Set vma_flags in vb2_dma_sg_mmap
vb2_dma_contig sets VMA flags VM_DONTEXPAND and VM_DONTDUMP and I do not
see a reason why vb2_dma_sg should behave differently. This avoids
hitting `WARN_ON(!(vma->vm_flags & VM_DONTEXPAND));` in
drm_gem_mmap_obj() during mmap() of an imported dma-buf from the out of
tree Apple ISP camera capture driver which uses vb2_dma_sg_memops.
gst-launch-1.0 v4l2src ! gtk4paintablesink
[ 38.201528] ------------[ cut here ]------------
[ 38.202135] WARNING: CPU: 7 PID: 2362 at drivers/gpu/drm/drm_gem.c:1144 drm_gem_mmap_obj+0x1f8/0x210
[ 38.203278] Modules linked in: rfcomm snd_seq_dummy snd_hrtimer
snd_seq snd_seq_device uinput nf_conntrack_netbios_ns
nf_conntrack_broadcast nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib
nft_reject_inet nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat
nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables qrtr bnep
nls_ascii i2c_dev loop fuse dm_multipath nfnetlink brcmfmac_wcc
hid_magicmouse hci_bcm4377 brcmfmac brcmutil bluetooth ecdh_generic
cfg80211 ecc btrfs xor xor_neon rfkill hid_apple raid6_pq joydev
aop_als apple_nvmem_spmi industrialio snd_soc_aop apple_z2
snd_soc_cs42l84 tps6598x snd_soc_tas2764 macsmc_reboot spi_nor
macsmc_hwmon rtc_macsmc gpio_macsmc macsmc_power regmap_spmi
macsmc_input dockchannel_hid panel_summit appledrm nvme_apple dwc3
snd_soc_macaudio drm_client_lib nvme_core phy_apple_atc hwmon
apple_sart apple_dockchannel macsmc apple_rtkit_helper
spmi_apple_controller aop apple_wdt mfd_core nvmem_apple_efuses
pinctrl_apple_gpio apple_isp apple_dcp videobuf2_dma_sg mux_core
spi_apple
[ 38.203300] videobuf2_memops i2c_pasemi_platform snd_soc_apple_mca videobuf2_v4l2 videodev clk_apple_nco videobuf2_common snd_pcm_dmaengine adpdrm asahi apple_admac adpdrm_mipi drm_dma_helper pwm_apple i2c_pasemi_core drm_display_helper mc cec apple_dart ofpart apple_soc_cpufreq leds_pwm phram
[ 38.217677] CPU: 7 UID: 1000 PID: 2362 Comm: gst-launch-1.0 Tainted: G W 6.17.6+ #asahi-dev PREEMPT(full)
[ 38.219040] Tainted: [W]=WARN
[ 38.219398] Hardware name: Apple MacBook Pro (13-inch, M2, 2022) (DT)
[ 38.220213] pstate: 21400005 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[ 38.221088] pc : drm_gem_mmap_obj+0x1f8/0x210
[ 38.221643] lr : drm_gem_mmap_obj+0x78/0x210
[ 38.222178] sp : ffffc0008dc678e0
[ 38.222579] x29: ffffc0008dc678e0 x28: 0000000000042a97 x27: ffff8000b701b480
[ 38.223465] x26: 00000000000000fb x25: ffffc0008dc67d20 x24: ffffc0008dc67968
[ 38.224402] x23: ffff8000e3ca5600 x22: ffff8000265b7800 x21: ffff80003000c0c0
[ 38.225279] x20: 0000000000000000 x19: ffff8000b68c5200 x18: ffffc0008dc67968
[ 38.226151] x17: 0000000000000000 x16: 0000000000000000 x15: ffffc000810a30a8
[ 38.227042] x14: 00007fff637effff x13: 00005555de91ffff x12: 00007fff63293fff
[ 38.227942] x11: 0000000000000000 x10: ffff8000184ecf08 x9 : ffffc0007a1900c8
[ 38.228824] x8 : ffffc0008dc67968 x7 : 0000000000000012 x6 : ffffc0015cf1c000
[ 38.229703] x5 : ffffc0008dc676a0 x4 : ffffc00081a27dc0 x3 : 0000000000000038
[ 38.230607] x2 : 0000000000000003 x1 : 0000000000000003 x0 : 00000000100000fb
[ 38.231488] Call trace:
[ 38.231806] drm_gem_mmap_obj+0x1f8/0x210 (P)
[ 38.232342] drm_gem_mmap+0x140/0x260
[ 38.232813] __mmap_region+0x488/0x9a0
[ 38.233277] mmap_region+0xd0/0x148
[ 38.233703] do_mmap+0x350/0x5c0
[ 38.234148] vm_mmap_pgoff+0x14c/0x200
[ 38.234612] ksys_mmap_pgoff+0x150/0x208
[ 38.235107] __arm64_sys_mmap+0x34/0x50
[ 38.235611] invoke_syscall+0x50/0x120
[ 38.236075] el0_svc_common.constprop.0+0x48/0xf0
[ 38.236680] do_el0_svc+0x24/0x38
[ 38.237113] el0_svc+0x38/0x168
[ 38.237507] el0t_64_sync_handler+0xa0/0xe8
[ 38.238034] el0t_64_sync+0x198/0x1a0
[ 38.238491] ---[ end trace 0000000000000000 ]---
There were discussions in [1] at the end of 2023 that mmap() on imported
---truncated--- |
| An integer underflow in bt_mesh_sol_recv() in the Bluetooth Mesh solicitation handling (subsys/bluetooth/mesh/solicitation.c) leads to an out-of-bounds write. When CONFIG_BT_MESH_OD_PRIV_PROXY_SRV is enabled, the function parses solicitation PDUs from raw BLE advertising payloads. The AD parsing loop reads an attacker-controlled length byte (reported_len) and computes reported_len - 3 without checking that reported_len >= 3. When reported_len is less than 3, the subtraction is performed in signed int arithmetic and yields a negative value that bypasses the length guard and is then implicitly converted to a very large size_t when passed to net_buf_simple_pull_mem(). In builds without assertions, this wraps the buffer length and advances the data pointer far out of bounds, so subsequent reads dereference invalid memory. A nearby BLE device can trigger this with a non-connectable advertisement carrying a UUID16 AD structure and a crafted length byte, with no pairing or prior association required, potentially leading to denial of service or arbitrary code execution. |
| TP-Link has identified a vulnerability in Tapo L535E v1.0 and v3.0, Tapo P300 v1.0, and Tapo D100C v1.0, where Bluetooth communication during the initial setup phase is transmitted in cleartext without encryption. Bluetooth is only used during initialization.
An attacker within the Bluetooth range could exploit this behavior using Bluetooth sniffing or man-in-the-middle techniques, which may allow eavesdropping on Bluetooth communication, manipulate transmitted setup data and potentially gain unauthorized control of the device during initialization.
An attacker
within the Bluetooth range could exploit this behavior using Bluetooth sniffing
or man-in-the-middle techniques, which may allow eavesdropping on Bluetooth
communication, manipulate transmitted setup data and potentially gain
unauthorized control of the device during initialization.
D100C is the
chime delivered with your Tapo camera, and it is delivered with the following
Tapo products:
D130, D210, D235,
D225, TD21, TDB21 and TD25 |
| In l2c_fcr_clone_buf of l2c_fcr.cc, there is a possible way to trigger controlled heap corruption within the privileged Bluetooth process due to an integer overflow. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| Use after free in Bluetooth in Google Chrome on Mac prior to 148.0.7778.216 allowed an attacker who convinced a user to install a malicious extension to potentially perform a sandbox escape via a crafted Chrome Extension. (Chromium security severity: Critical) |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: virtio_bt: clamp rx length before skb_put
virtbt_rx_work() calls skb_put(skb, len) where len comes directly
from virtqueue_get_buf() with no validation against the buffer we
posted to the device. The RX skb is allocated in virtbt_add_inbuf()
and exposed to virtio as exactly 1000 bytes via sg_init_one().
Checking len against skb_tailroom(skb) is not sufficient because
alloc_skb() can leave more tailroom than the 1000 bytes actually
handed to the device. A malicious or buggy backend can therefore
report used.len between 1001 and skb_tailroom(skb), causing skb_put()
to include uninitialized kernel heap bytes that were never written by
the device.
The same path also accepts len == 0, in which case skb_put(skb, 0)
leaves the skb empty but virtbt_rx_handle() still reads the pkt_type
byte from skb->data, consuming uninitialized memory.
Define VIRTBT_RX_BUF_SIZE once and reuse it in alloc_skb() and
sg_init_one(), and gate virtbt_rx_work() on that same constant so
the bound checked matches the buffer actually exposed to the device.
Reject used.len == 0 in the same gate so an empty completion can
no longer reach virtbt_rx_handle().
Use bt_dev_err_ratelimited() because the length value comes from an
untrusted backend that can otherwise flood the kernel log.
Same class of bug as commit c04db81cd028 ("net/9p: Fix buffer
overflow in USB transport layer"), which hardened the USB 9p
transport against unchecked device-reported length. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: af_bluetooth: Fix deadlock
Attemting to do sock_lock on .recvmsg may cause a deadlock as shown
bellow, so instead of using sock_sock this uses sk_receive_queue.lock
on bt_sock_ioctl to avoid the UAF:
INFO: task kworker/u9:1:121 blocked for more than 30 seconds.
Not tainted 6.7.6-lemon #183
Workqueue: hci0 hci_rx_work
Call Trace:
<TASK>
__schedule+0x37d/0xa00
schedule+0x32/0xe0
__lock_sock+0x68/0xa0
? __pfx_autoremove_wake_function+0x10/0x10
lock_sock_nested+0x43/0x50
l2cap_sock_recv_cb+0x21/0xa0
l2cap_recv_frame+0x55b/0x30a0
? psi_task_switch+0xeb/0x270
? finish_task_switch.isra.0+0x93/0x2a0
hci_rx_work+0x33a/0x3f0
process_one_work+0x13a/0x2f0
worker_thread+0x2f0/0x410
? __pfx_worker_thread+0x10/0x10
kthread+0xe0/0x110
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2c/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK> |
| Use after free in Bluetooth in Google Chrome on Mac prior to 148.0.7778.216 allowed an attacker who convinced a user to install a malicious extension to execute arbitrary code via a crafted Chrome Extension. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_ll: Fix firmware leak on error path
Smatch reports:
drivers/bluetooth/hci_ll.c:587 download_firmware() warn:
'fw' from request_firmware() not released on lines: 544.
In download_firmware(), if request_firmware() succeeds but the returned
firmware content is invalid (no data or zero size), the function returns
without releasing the firmware, resulting in a resource leak.
Fix this by calling release_firmware() before returning when
request_firmware() succeeded but the firmware content is invalid. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: purge error queues in socket destructors
When TX timestamping is enabled via SO_TIMESTAMPING, SKBs may be queued
into sk_error_queue and will stay there until consumed. If userspace never
gets to read the timestamps, or if the controller is removed unexpectedly,
these SKBs will leak.
Fix by adding skb_queue_purge() calls for sk_error_queue in affected
bluetooth destructors. RFCOMM does not currently use sk_error_queue. |
| A vulnerability was determined in Besen BS20 EV Charging Station up to 20260426. This impacts an unknown function of the component Bluetooth Low Energy Handler. Executing a manipulation can lead to weak password requirements. The attack needs to be done within the local network. This attack is characterized by high complexity. The exploitability is said to be difficult. The original disclosure mentions, that "[t]hese vulnerabilities have been reported to Besen and we have received their acknowlegement that they are reviewing this as of April 2026." |
| An attacker is able to downgrade the security of a Bluetooth LE connection by deleting an existing bond, spoofing the bonded device and creating a new bond. |
