| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
block: Fix possible memory leak for rq_wb on add_disk failure
kmemleak reported memory leaks in device_add_disk():
kmemleak: 3 new suspected memory leaks
unreferenced object 0xffff88800f420800 (size 512):
comm "modprobe", pid 4275, jiffies 4295639067 (age 223.512s)
hex dump (first 32 bytes):
04 00 00 00 08 00 00 00 01 00 00 00 00 00 00 00 ................
00 e1 f5 05 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000d3662699>] kmalloc_trace+0x26/0x60
[<00000000edc7aadc>] wbt_init+0x50/0x6f0
[<0000000069601d16>] wbt_enable_default+0x157/0x1c0
[<0000000028fc393f>] blk_register_queue+0x2a4/0x420
[<000000007345a042>] device_add_disk+0x6fd/0xe40
[<0000000060e6aab0>] nbd_dev_add+0x828/0xbf0 [nbd]
...
It is because the memory allocated in wbt_enable_default() is not
released in device_add_disk() error path.
Normally, these memory are freed in:
del_gendisk()
rq_qos_exit()
rqos->ops->exit(rqos);
wbt_exit()
So rq_qos_exit() is called to free the rq_wb memory for wbt_init().
However in the error path of device_add_disk(), only
blk_unregister_queue() is called and make rq_wb memory leaked.
Add rq_qos_exit() to the error path to fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
net: relax socket state check at accept time.
Christoph reported the following splat:
WARNING: CPU: 1 PID: 772 at net/ipv4/af_inet.c:761 __inet_accept+0x1f4/0x4a0
Modules linked in:
CPU: 1 PID: 772 Comm: syz-executor510 Not tainted 6.9.0-rc7-g7da7119fe22b #56
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
RIP: 0010:__inet_accept+0x1f4/0x4a0 net/ipv4/af_inet.c:759
Code: 04 38 84 c0 0f 85 87 00 00 00 41 c7 04 24 03 00 00 00 48 83 c4 10 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc e8 ec b7 da fd <0f> 0b e9 7f fe ff ff e8 e0 b7 da fd 0f 0b e9 fe fe ff ff 89 d9 80
RSP: 0018:ffffc90000c2fc58 EFLAGS: 00010293
RAX: ffffffff836bdd14 RBX: 0000000000000000 RCX: ffff888104668000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: dffffc0000000000 R08: ffffffff836bdb89 R09: fffff52000185f64
R10: dffffc0000000000 R11: fffff52000185f64 R12: dffffc0000000000
R13: 1ffff92000185f98 R14: ffff88810754d880 R15: ffff8881007b7800
FS: 000000001c772880(0000) GS:ffff88811b280000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fb9fcf2e178 CR3: 00000001045d2002 CR4: 0000000000770ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
inet_accept+0x138/0x1d0 net/ipv4/af_inet.c:786
do_accept+0x435/0x620 net/socket.c:1929
__sys_accept4_file net/socket.c:1969 [inline]
__sys_accept4+0x9b/0x110 net/socket.c:1999
__do_sys_accept net/socket.c:2016 [inline]
__se_sys_accept net/socket.c:2013 [inline]
__x64_sys_accept+0x7d/0x90 net/socket.c:2013
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x58/0x100 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x4315f9
Code: fd ff 48 81 c4 80 00 00 00 e9 f1 fe ff ff 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 ab b4 fd ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007ffdb26d9c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002b
RAX: ffffffffffffffda RBX: 0000000000400300 RCX: 00000000004315f9
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000004
RBP: 00000000006e1018 R08: 0000000000400300 R09: 0000000000400300
R10: 0000000000400300 R11: 0000000000000246 R12: 0000000000000000
R13: 000000000040cdf0 R14: 000000000040ce80 R15: 0000000000000055
</TASK>
The reproducer invokes shutdown() before entering the listener status.
After commit 94062790aedb ("tcp: defer shutdown(SEND_SHUTDOWN) for
TCP_SYN_RECV sockets"), the above causes the child to reach the accept
syscall in FIN_WAIT1 status.
Eric noted we can relax the existing assertion in __inet_accept() |
| A vulnerability was found in xataio Xata Agent up to 0.3.0. It has been classified as problematic. This affects the function GET of the file apps/dbagent/src/app/api/evals/route.ts. The manipulation of the argument passed leads to path traversal. Upgrading to version 0.3.1 is able to address this issue. The patch is named 03f27055e0cf5d4fa7e874d34ce8c74c7b9086cc. It is recommended to upgrade the affected component. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Use del_timer_sync in fw reset flow of halting poll
Substitute del_timer() with del_timer_sync() in fw reset polling
deactivation flow, in order to prevent a race condition which occurs
when del_timer() is called and timer is deactivated while another
process is handling the timer interrupt. A situation that led to
the following call trace:
RIP: 0010:run_timer_softirq+0x137/0x420
<IRQ>
recalibrate_cpu_khz+0x10/0x10
ktime_get+0x3e/0xa0
? sched_clock_cpu+0xb/0xc0
__do_softirq+0xf5/0x2ea
irq_exit_rcu+0xc1/0xf0
sysvec_apic_timer_interrupt+0x9e/0xc0
asm_sysvec_apic_timer_interrupt+0x12/0x20
</IRQ> |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix re-dirty process of tree-log nodes
There is a report of a transaction abort of -EAGAIN with the following
script.
#!/bin/sh
for d in sda sdb; do
mkfs.btrfs -d single -m single -f /dev/\${d}
done
mount /dev/sda /mnt/test
mount /dev/sdb /mnt/scratch
for dir in test scratch; do
echo 3 >/proc/sys/vm/drop_caches
fio --directory=/mnt/\${dir} --name=fio.\${dir} --rw=read --size=50G --bs=64m \
--numjobs=$(nproc) --time_based --ramp_time=5 --runtime=480 \
--group_reporting |& tee /dev/shm/fio.\${dir}
echo 3 >/proc/sys/vm/drop_caches
done
for d in sda sdb; do
umount /dev/\${d}
done
The stack trace is shown in below.
[3310.967991] BTRFS: error (device sda) in btrfs_commit_transaction:2341: errno=-11 unknown (Error while writing out transaction)
[3310.968060] BTRFS info (device sda): forced readonly
[3310.968064] BTRFS warning (device sda): Skipping commit of aborted transaction.
[3310.968065] ------------[ cut here ]------------
[3310.968066] BTRFS: Transaction aborted (error -11)
[3310.968074] WARNING: CPU: 14 PID: 1684 at fs/btrfs/transaction.c:1946 btrfs_commit_transaction.cold+0x209/0x2c8
[3310.968131] CPU: 14 PID: 1684 Comm: fio Not tainted 5.14.10-300.fc35.x86_64 #1
[3310.968135] Hardware name: DIAWAY Tartu/Tartu, BIOS V2.01.B10 04/08/2021
[3310.968137] RIP: 0010:btrfs_commit_transaction.cold+0x209/0x2c8
[3310.968144] RSP: 0018:ffffb284ce393e10 EFLAGS: 00010282
[3310.968147] RAX: 0000000000000026 RBX: ffff973f147b0f60 RCX: 0000000000000027
[3310.968149] RDX: ffff974ecf098a08 RSI: 0000000000000001 RDI: ffff974ecf098a00
[3310.968150] RBP: ffff973f147b0f08 R08: 0000000000000000 R09: ffffb284ce393c48
[3310.968151] R10: ffffb284ce393c40 R11: ffffffff84f47468 R12: ffff973f101bfc00
[3310.968153] R13: ffff971f20cf2000 R14: 00000000fffffff5 R15: ffff973f147b0e58
[3310.968154] FS: 00007efe65468740(0000) GS:ffff974ecf080000(0000) knlGS:0000000000000000
[3310.968157] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[3310.968158] CR2: 000055691bcbe260 CR3: 000000105cfa4001 CR4: 0000000000770ee0
[3310.968160] PKRU: 55555554
[3310.968161] Call Trace:
[3310.968167] ? dput+0xd4/0x300
[3310.968174] btrfs_sync_file+0x3f1/0x490
[3310.968180] __x64_sys_fsync+0x33/0x60
[3310.968185] do_syscall_64+0x3b/0x90
[3310.968190] entry_SYSCALL_64_after_hwframe+0x44/0xae
[3310.968194] RIP: 0033:0x7efe6557329b
[3310.968200] RSP: 002b:00007ffe0236ebc0 EFLAGS: 00000293 ORIG_RAX: 000000000000004a
[3310.968203] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007efe6557329b
[3310.968204] RDX: 0000000000000000 RSI: 00007efe58d77010 RDI: 0000000000000006
[3310.968205] RBP: 0000000004000000 R08: 0000000000000000 R09: 00007efe58d77010
[3310.968207] R10: 0000000016cacc0c R11: 0000000000000293 R12: 00007efe5ce95980
[3310.968208] R13: 0000000000000000 R14: 00007efe6447c790 R15: 0000000c80000000
[3310.968212] ---[ end trace 1a346f4d3c0d96ba ]---
[3310.968214] BTRFS: error (device sda) in cleanup_transaction:1946: errno=-11 unknown
The abort occurs because of a write hole while writing out freeing tree
nodes of a tree-log tree. For zoned btrfs, we re-dirty a freed tree
node to ensure btrfs can write the region and does not leave a hole on
write on a zoned device. The current code fails to re-dirty a node
when the tree-log tree's depth is greater or equal to 2. That leads to
a transaction abort with -EAGAIN.
Fix the issue by properly re-dirtying a node on walking up the tree. |
| wasm-micro-runtime (aka WebAssembly Micro Runtime or WAMR) 06df58f is vulnerable to NULL Pointer Dereference in function `block_type_get_result_types. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: make cow_file_range_inline() honor locked_page on error
The btrfs buffered write path runs through __extent_writepage() which
has some tricky return value handling for writepage_delalloc().
Specifically, when that returns 1, we exit, but for other return values
we continue and end up calling btrfs_folio_end_all_writers(). If the
folio has been unlocked (note that we check the PageLocked bit at the
start of __extent_writepage()), this results in an assert panic like
this one from syzbot:
BTRFS: error (device loop0 state EAL) in free_log_tree:3267: errno=-5 IO failure
BTRFS warning (device loop0 state EAL): Skipping commit of aborted transaction.
BTRFS: error (device loop0 state EAL) in cleanup_transaction:2018: errno=-5 IO failure
assertion failed: folio_test_locked(folio), in fs/btrfs/subpage.c:871
------------[ cut here ]------------
kernel BUG at fs/btrfs/subpage.c:871!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 1 PID: 5090 Comm: syz-executor225 Not tainted
6.10.0-syzkaller-05505-gb1bc554e009e #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 06/27/2024
RIP: 0010:btrfs_folio_end_all_writers+0x55b/0x610 fs/btrfs/subpage.c:871
Code: e9 d3 fb ff ff e8 25 22 c2 fd 48 c7 c7 c0 3c 0e 8c 48 c7 c6 80 3d
0e 8c 48 c7 c2 60 3c 0e 8c b9 67 03 00 00 e8 66 47 ad 07 90 <0f> 0b e8
6e 45 b0 07 4c 89 ff be 08 00 00 00 e8 21 12 25 fe 4c 89
RSP: 0018:ffffc900033d72e0 EFLAGS: 00010246
RAX: 0000000000000045 RBX: 00fff0000000402c RCX: 663b7a08c50a0a00
RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000
RBP: ffffc900033d73b0 R08: ffffffff8176b98c R09: 1ffff9200067adfc
R10: dffffc0000000000 R11: fffff5200067adfd R12: 0000000000000001
R13: dffffc0000000000 R14: 0000000000000000 R15: ffffea0001cbee80
FS: 0000000000000000(0000) GS:ffff8880b9500000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f5f076012f8 CR3: 000000000e134000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__extent_writepage fs/btrfs/extent_io.c:1597 [inline]
extent_write_cache_pages fs/btrfs/extent_io.c:2251 [inline]
btrfs_writepages+0x14d7/0x2760 fs/btrfs/extent_io.c:2373
do_writepages+0x359/0x870 mm/page-writeback.c:2656
filemap_fdatawrite_wbc+0x125/0x180 mm/filemap.c:397
__filemap_fdatawrite_range mm/filemap.c:430 [inline]
__filemap_fdatawrite mm/filemap.c:436 [inline]
filemap_flush+0xdf/0x130 mm/filemap.c:463
btrfs_release_file+0x117/0x130 fs/btrfs/file.c:1547
__fput+0x24a/0x8a0 fs/file_table.c:422
task_work_run+0x24f/0x310 kernel/task_work.c:222
exit_task_work include/linux/task_work.h:40 [inline]
do_exit+0xa2f/0x27f0 kernel/exit.c:877
do_group_exit+0x207/0x2c0 kernel/exit.c:1026
__do_sys_exit_group kernel/exit.c:1037 [inline]
__se_sys_exit_group kernel/exit.c:1035 [inline]
__x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1035
x64_sys_call+0x2634/0x2640
arch/x86/include/generated/asm/syscalls_64.h:232
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f5f075b70c9
Code: Unable to access opcode bytes at
0x7f5f075b709f.
I was hitting the same issue by doing hundreds of accelerated runs of
generic/475, which also hits IO errors by design.
I instrumented that reproducer with bpftrace and found that the
undesirable folio_unlock was coming from the following callstack:
folio_unlock+5
__process_pages_contig+475
cow_file_range_inline.constprop.0+230
cow_file_range+803
btrfs_run_delalloc_range+566
writepage_delalloc+332
__extent_writepage # inlined in my stacktrace, but I added it here
extent_write_cache_pages+622
Looking at the bisected-to pa
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: mediatek: Check num_codecs is not zero to avoid panic during probe
Following commit 13f58267cda3 ("ASoC: soc.h: don't create dummy
Component via COMP_DUMMY()"), COMP_DUMMY() became an array with zero
length, and only gets populated with the dummy struct after the card is
registered. Since the sound card driver's probe happens before the card
registration, accessing any of the members of a dummy component during
probe will result in undefined behavior.
This can be observed in the mt8188 and mt8195 machine sound drivers. By
omitting a dai link subnode in the sound card's node in the Devicetree,
the default uninitialized dummy codec is used, and when its dai_name
pointer gets passed to strcmp() it results in a null pointer dereference
and a kernel panic.
In addition to that, set_card_codec_info() in the generic helpers file,
mtk-soundcard-driver.c, will populate a dai link with a dummy codec when
a dai link node is present in DT but with no codec property.
The result is that at probe time, a dummy codec can either be
uninitialized with num_codecs = 0, or be an initialized dummy codec,
with num_codecs = 1 and dai_name = "snd-soc-dummy-dai". In order to
accommodate for both situations, check that num_codecs is not zero
before accessing the codecs' fields but still check for the codec's dai
name against "snd-soc-dummy-dai" as needed.
While at it, also drop the check that dai_name is not null in the mt8192
driver, introduced in commit 4d4e1b6319e5 ("ASoC: mediatek: mt8192:
Check existence of dai_name before dereferencing"), as it is actually
redundant given the preceding num_codecs != 0 check. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: zlib: fix avail_in bytes for s390 zlib HW compression path
Since the input data length passed to zlib_compress_folios() can be
arbitrary, always setting strm.avail_in to a multiple of PAGE_SIZE may
cause read-in bytes to exceed the input range. Currently this triggers
an assert in btrfs_compress_folios() on the debug kernel (see below).
Fix strm.avail_in calculation for S390 hardware acceleration path.
assertion failed: *total_in <= orig_len, in fs/btrfs/compression.c:1041
------------[ cut here ]------------
kernel BUG at fs/btrfs/compression.c:1041!
monitor event: 0040 ilc:2 [#1] PREEMPT SMP
CPU: 16 UID: 0 PID: 325 Comm: kworker/u273:3 Not tainted 6.13.0-20241204.rc1.git6.fae3b21430ca.300.fc41.s390x+debug #1
Hardware name: IBM 3931 A01 703 (z/VM 7.4.0)
Workqueue: btrfs-delalloc btrfs_work_helper
Krnl PSW : 0704d00180000000 0000021761df6538 (btrfs_compress_folios+0x198/0x1a0)
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 RI:0 EA:3
Krnl GPRS: 0000000080000000 0000000000000001 0000000000000047 0000000000000000
0000000000000006 ffffff01757bb000 000001976232fcc0 000000000000130c
000001976232fcd0 000001976232fcc8 00000118ff4a0e30 0000000000000001
00000111821ab400 0000011100000000 0000021761df6534 000001976232fb58
Krnl Code: 0000021761df6528: c020006f5ef4 larl %r2,0000021762be2310
0000021761df652e: c0e5ffbd09d5 brasl %r14,00000217615978d8
#0000021761df6534: af000000 mc 0,0
>0000021761df6538: 0707 bcr 0,%r7
0000021761df653a: 0707 bcr 0,%r7
0000021761df653c: 0707 bcr 0,%r7
0000021761df653e: 0707 bcr 0,%r7
0000021761df6540: c004004bb7ec brcl 0,000002176276d518
Call Trace:
[<0000021761df6538>] btrfs_compress_folios+0x198/0x1a0
([<0000021761df6534>] btrfs_compress_folios+0x194/0x1a0)
[<0000021761d97788>] compress_file_range+0x3b8/0x6d0
[<0000021761dcee7c>] btrfs_work_helper+0x10c/0x160
[<0000021761645760>] process_one_work+0x2b0/0x5d0
[<000002176164637e>] worker_thread+0x20e/0x3e0
[<000002176165221a>] kthread+0x15a/0x170
[<00000217615b859c>] __ret_from_fork+0x3c/0x60
[<00000217626e72d2>] ret_from_fork+0xa/0x38
INFO: lockdep is turned off.
Last Breaking-Event-Address:
[<0000021761597924>] _printk+0x4c/0x58
Kernel panic - not syncing: Fatal exception: panic_on_oops |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Add a lock when accessing the buddy trim function
When running YouTube videos and Steam games simultaneously,
the tester found a system hang / race condition issue with
the multi-display configuration setting. Adding a lock to
the buddy allocator's trim function would be the solution.
<log snip>
[ 7197.250436] general protection fault, probably for non-canonical address 0xdead000000000108
[ 7197.250447] RIP: 0010:__alloc_range+0x8b/0x340 [amddrm_buddy]
[ 7197.250470] Call Trace:
[ 7197.250472] <TASK>
[ 7197.250475] ? show_regs+0x6d/0x80
[ 7197.250481] ? die_addr+0x37/0xa0
[ 7197.250483] ? exc_general_protection+0x1db/0x480
[ 7197.250488] ? drm_suballoc_new+0x13c/0x93d [drm_suballoc_helper]
[ 7197.250493] ? asm_exc_general_protection+0x27/0x30
[ 7197.250498] ? __alloc_range+0x8b/0x340 [amddrm_buddy]
[ 7197.250501] ? __alloc_range+0x109/0x340 [amddrm_buddy]
[ 7197.250506] amddrm_buddy_block_trim+0x1b5/0x260 [amddrm_buddy]
[ 7197.250511] amdgpu_vram_mgr_new+0x4f5/0x590 [amdgpu]
[ 7197.250682] amdttm_resource_alloc+0x46/0xb0 [amdttm]
[ 7197.250689] ttm_bo_alloc_resource+0xe4/0x370 [amdttm]
[ 7197.250696] amdttm_bo_validate+0x9d/0x180 [amdttm]
[ 7197.250701] amdgpu_bo_pin+0x15a/0x2f0 [amdgpu]
[ 7197.250831] amdgpu_dm_plane_helper_prepare_fb+0xb2/0x360 [amdgpu]
[ 7197.251025] ? try_wait_for_completion+0x59/0x70
[ 7197.251030] drm_atomic_helper_prepare_planes.part.0+0x2f/0x1e0
[ 7197.251035] drm_atomic_helper_prepare_planes+0x5d/0x70
[ 7197.251037] drm_atomic_helper_commit+0x84/0x160
[ 7197.251040] drm_atomic_nonblocking_commit+0x59/0x70
[ 7197.251043] drm_mode_atomic_ioctl+0x720/0x850
[ 7197.251047] ? __pfx_drm_mode_atomic_ioctl+0x10/0x10
[ 7197.251049] drm_ioctl_kernel+0xb9/0x120
[ 7197.251053] ? srso_alias_return_thunk+0x5/0xfbef5
[ 7197.251056] drm_ioctl+0x2d4/0x550
[ 7197.251058] ? __pfx_drm_mode_atomic_ioctl+0x10/0x10
[ 7197.251063] amdgpu_drm_ioctl+0x4e/0x90 [amdgpu]
[ 7197.251186] __x64_sys_ioctl+0xa0/0xf0
[ 7197.251190] x64_sys_call+0x143b/0x25c0
[ 7197.251193] do_syscall_64+0x7f/0x180
[ 7197.251197] ? srso_alias_return_thunk+0x5/0xfbef5
[ 7197.251199] ? amdgpu_display_user_framebuffer_create+0x215/0x320 [amdgpu]
[ 7197.251329] ? drm_internal_framebuffer_create+0xb7/0x1a0
[ 7197.251332] ? srso_alias_return_thunk+0x5/0xfbef5
(cherry picked from commit 3318ba94e56b9183d0304577c74b33b6b01ce516) |
| A vulnerability was found in GuanxingLu vlarl up to 31abc0baf53ef8f5db666a1c882e1ea64def2997. This vulnerability affects the function experiments.robot.bridge.reasoning_server::run_reasoning_server of the file experiments/robot/bridge/reasoning_server.py of the component ZeroMQ. Performing manipulation of the argument Message results in deserialization. Remote exploitation of the attack is possible. The exploit has been made public and could be used. This product follows a rolling release approach for continuous delivery, so version details for affected or updated releases are not provided. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-raid: really frozen sync_thread during suspend
1) commit f52f5c71f3d4 ("md: fix stopping sync thread") remove
MD_RECOVERY_FROZEN from __md_stop_writes() and doesn't realize that
dm-raid relies on __md_stop_writes() to frozen sync_thread
indirectly. Fix this problem by adding MD_RECOVERY_FROZEN in
md_stop_writes(), and since stop_sync_thread() is only used for
dm-raid in this case, also move stop_sync_thread() to
md_stop_writes().
2) The flag MD_RECOVERY_FROZEN doesn't mean that sync thread is frozen,
it only prevent new sync_thread to start, and it can't stop the
running sync thread; In order to frozen sync_thread, after seting the
flag, stop_sync_thread() should be used.
3) The flag MD_RECOVERY_FROZEN doesn't mean that writes are stopped, use
it as condition for md_stop_writes() in raid_postsuspend() doesn't
look correct. Consider that reentrant stop_sync_thread() do nothing,
always call md_stop_writes() in raid_postsuspend().
4) raid_message can set/clear the flag MD_RECOVERY_FROZEN at anytime,
and if MD_RECOVERY_FROZEN is cleared while the array is suspended,
new sync_thread can start unexpected. Fix this by disallow
raid_message() to change sync_thread status during suspend.
Note that after commit f52f5c71f3d4 ("md: fix stopping sync thread"), the
test shell/lvconvert-raid-reshape.sh start to hang in stop_sync_thread(),
and with previous fixes, the test won't hang there anymore, however, the
test will still fail and complain that ext4 is corrupted. And with this
patch, the test won't hang due to stop_sync_thread() or fail due to ext4
is corrupted anymore. However, there is still a deadlock related to
dm-raid456 that will be fixed in following patches. |
| In the Linux kernel, the following vulnerability has been resolved:
net: use a bounce buffer for copying skb->mark
syzbot found arm64 builds would crash in sock_recv_mark()
when CONFIG_HARDENED_USERCOPY=y
x86 and powerpc are not detecting the issue because
they define user_access_begin.
This will be handled in a different patch,
because a check_object_size() is missing.
Only data from skb->cb[] can be copied directly to/from user space,
as explained in commit 79a8a642bf05 ("net: Whitelist
the skbuff_head_cache "cb" field")
syzbot report was:
usercopy: Kernel memory exposure attempt detected from SLUB object 'skbuff_head_cache' (offset 168, size 4)!
------------[ cut here ]------------
kernel BUG at mm/usercopy.c:102 !
Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 4410 Comm: syz-executor533 Not tainted 6.2.0-rc7-syzkaller-17907-g2d3827b3f393 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/21/2023
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : usercopy_abort+0x90/0x94 mm/usercopy.c:90
lr : usercopy_abort+0x90/0x94 mm/usercopy.c:90
sp : ffff80000fb9b9a0
x29: ffff80000fb9b9b0 x28: ffff0000c6073400 x27: 0000000020001a00
x26: 0000000000000014 x25: ffff80000cf52000 x24: fffffc0000000000
x23: 05ffc00000000200 x22: fffffc000324bf80 x21: ffff0000c92fe1a8
x20: 0000000000000001 x19: 0000000000000004 x18: 0000000000000000
x17: 656a626f2042554c x16: ffff0000c6073dd0 x15: ffff80000dbd2118
x14: ffff0000c6073400 x13: 00000000ffffffff x12: ffff0000c6073400
x11: ff808000081bbb4c x10: 0000000000000000 x9 : 7b0572d7cc0ccf00
x8 : 7b0572d7cc0ccf00 x7 : ffff80000bf650d4 x6 : 0000000000000000
x5 : 0000000000000001 x4 : 0000000000000001 x3 : 0000000000000000
x2 : ffff0001fefbff08 x1 : 0000000100000000 x0 : 000000000000006c
Call trace:
usercopy_abort+0x90/0x94 mm/usercopy.c:90
__check_heap_object+0xa8/0x100 mm/slub.c:4761
check_heap_object mm/usercopy.c:196 [inline]
__check_object_size+0x208/0x6b8 mm/usercopy.c:251
check_object_size include/linux/thread_info.h:199 [inline]
__copy_to_user include/linux/uaccess.h:115 [inline]
put_cmsg+0x408/0x464 net/core/scm.c:238
sock_recv_mark net/socket.c:975 [inline]
__sock_recv_cmsgs+0x1fc/0x248 net/socket.c:984
sock_recv_cmsgs include/net/sock.h:2728 [inline]
packet_recvmsg+0x2d8/0x678 net/packet/af_packet.c:3482
____sys_recvmsg+0x110/0x3a0
___sys_recvmsg net/socket.c:2737 [inline]
__sys_recvmsg+0x194/0x210 net/socket.c:2767
__do_sys_recvmsg net/socket.c:2777 [inline]
__se_sys_recvmsg net/socket.c:2774 [inline]
__arm64_sys_recvmsg+0x2c/0x3c net/socket.c:2774
__invoke_syscall arch/arm64/kernel/syscall.c:38 [inline]
invoke_syscall+0x64/0x178 arch/arm64/kernel/syscall.c:52
el0_svc_common+0xbc/0x180 arch/arm64/kernel/syscall.c:142
do_el0_svc+0x48/0x110 arch/arm64/kernel/syscall.c:193
el0_svc+0x58/0x14c arch/arm64/kernel/entry-common.c:637
el0t_64_sync_handler+0x84/0xf0 arch/arm64/kernel/entry-common.c:655
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591
Code: 91388800 aa0903e1 f90003e8 94e6d752 (d4210000) |
| In the Linux kernel, the following vulnerability has been resolved:
freezer,umh: Fix call_usermode_helper_exec() vs SIGKILL
Tetsuo-San noted that commit f5d39b020809 ("freezer,sched: Rewrite
core freezer logic") broke call_usermodehelper_exec() for the KILLABLE
case.
Specifically it was missed that the second, unconditional,
wait_for_completion() was not optional and ensures the on-stack
completion is unused before going out-of-scope. |
| In the Linux kernel, the following vulnerability has been resolved:
net: USB: Fix wrong-direction WARNING in plusb.c
The syzbot fuzzer detected a bug in the plusb network driver: A
zero-length control-OUT transfer was treated as a read instead of a
write. In modern kernels this error provokes a WARNING:
usb 1-1: BOGUS control dir, pipe 80000280 doesn't match bRequestType c0
WARNING: CPU: 0 PID: 4645 at drivers/usb/core/urb.c:411
usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411
Modules linked in:
CPU: 1 PID: 4645 Comm: dhcpcd Not tainted
6.2.0-rc6-syzkaller-00050-g9f266ccaa2f5 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google
01/12/2023
RIP: 0010:usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411
...
Call Trace:
<TASK>
usb_start_wait_urb+0x101/0x4b0 drivers/usb/core/message.c:58
usb_internal_control_msg drivers/usb/core/message.c:102 [inline]
usb_control_msg+0x320/0x4a0 drivers/usb/core/message.c:153
__usbnet_read_cmd+0xb9/0x390 drivers/net/usb/usbnet.c:2010
usbnet_read_cmd+0x96/0xf0 drivers/net/usb/usbnet.c:2068
pl_vendor_req drivers/net/usb/plusb.c:60 [inline]
pl_set_QuickLink_features drivers/net/usb/plusb.c:75 [inline]
pl_reset+0x2f/0xf0 drivers/net/usb/plusb.c:85
usbnet_open+0xcc/0x5d0 drivers/net/usb/usbnet.c:889
__dev_open+0x297/0x4d0 net/core/dev.c:1417
__dev_change_flags+0x587/0x750 net/core/dev.c:8530
dev_change_flags+0x97/0x170 net/core/dev.c:8602
devinet_ioctl+0x15a2/0x1d70 net/ipv4/devinet.c:1147
inet_ioctl+0x33f/0x380 net/ipv4/af_inet.c:979
sock_do_ioctl+0xcc/0x230 net/socket.c:1169
sock_ioctl+0x1f8/0x680 net/socket.c:1286
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__x64_sys_ioctl+0x197/0x210 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The fix is to call usbnet_write_cmd() instead of usbnet_read_cmd() and
remove the USB_DIR_IN flag. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: deal with large GSO size
After the blamed commit below, the TCP sockets (and the MPTCP subflows)
can build egress packets larger than 64K. That exceeds the maximum DSS
data size, the length being misrepresent on the wire and the stream being
corrupted, as later observed on the receiver:
WARNING: CPU: 0 PID: 9696 at net/mptcp/protocol.c:705 __mptcp_move_skbs_from_subflow+0x2604/0x26e0
CPU: 0 PID: 9696 Comm: syz-executor.7 Not tainted 6.6.0-rc5-gcd8bdf563d46 #45
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
netlink: 8 bytes leftover after parsing attributes in process `syz-executor.4'.
RIP: 0010:__mptcp_move_skbs_from_subflow+0x2604/0x26e0 net/mptcp/protocol.c:705
RSP: 0018:ffffc90000006e80 EFLAGS: 00010246
RAX: ffffffff83e9f674 RBX: ffff88802f45d870 RCX: ffff888102ad0000
netlink: 8 bytes leftover after parsing attributes in process `syz-executor.4'.
RDX: 0000000080000303 RSI: 0000000000013908 RDI: 0000000000003908
RBP: ffffc90000007110 R08: ffffffff83e9e078 R09: 1ffff1100e548c8a
R10: dffffc0000000000 R11: ffffed100e548c8b R12: 0000000000013908
R13: dffffc0000000000 R14: 0000000000003908 R15: 000000000031cf29
FS: 00007f239c47e700(0000) GS:ffff88811b200000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f239c45cd78 CR3: 000000006a66c006 CR4: 0000000000770ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600
PKRU: 55555554
Call Trace:
<IRQ>
mptcp_data_ready+0x263/0xac0 net/mptcp/protocol.c:819
subflow_data_ready+0x268/0x6d0 net/mptcp/subflow.c:1409
tcp_data_queue+0x21a1/0x7a60 net/ipv4/tcp_input.c:5151
tcp_rcv_established+0x950/0x1d90 net/ipv4/tcp_input.c:6098
tcp_v6_do_rcv+0x554/0x12f0 net/ipv6/tcp_ipv6.c:1483
tcp_v6_rcv+0x2e26/0x3810 net/ipv6/tcp_ipv6.c:1749
ip6_protocol_deliver_rcu+0xd6b/0x1ae0 net/ipv6/ip6_input.c:438
ip6_input+0x1c5/0x470 net/ipv6/ip6_input.c:483
ipv6_rcv+0xef/0x2c0 include/linux/netfilter.h:304
__netif_receive_skb+0x1ea/0x6a0 net/core/dev.c:5532
process_backlog+0x353/0x660 net/core/dev.c:5974
__napi_poll+0xc6/0x5a0 net/core/dev.c:6536
net_rx_action+0x6a0/0xfd0 net/core/dev.c:6603
__do_softirq+0x184/0x524 kernel/softirq.c:553
do_softirq+0xdd/0x130 kernel/softirq.c:454
Address the issue explicitly bounding the maximum GSO size to what MPTCP
actually allows. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: Flush current cpu icache before other cpus
On SiFive Unmatched, I recently fell onto the following BUG when booting:
[ 0.000000] ftrace: allocating 36610 entries in 144 pages
[ 0.000000] Oops - illegal instruction [#1]
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.13.1+ #5
[ 0.000000] Hardware name: SiFive HiFive Unmatched A00 (DT)
[ 0.000000] epc : riscv_cpuid_to_hartid_mask+0x6/0xae
[ 0.000000] ra : __sbi_rfence_v02+0xc8/0x10a
[ 0.000000] epc : ffffffff80007240 ra : ffffffff80009964 sp : ffffffff81803e10
[ 0.000000] gp : ffffffff81a1ea70 tp : ffffffff8180f500 t0 : ffffffe07fe30000
[ 0.000000] t1 : 0000000000000004 t2 : 0000000000000000 s0 : ffffffff81803e60
[ 0.000000] s1 : 0000000000000000 a0 : ffffffff81a22238 a1 : ffffffff81803e10
[ 0.000000] a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000
[ 0.000000] a5 : 0000000000000000 a6 : ffffffff8000989c a7 : 0000000052464e43
[ 0.000000] s2 : ffffffff81a220c8 s3 : 0000000000000000 s4 : 0000000000000000
[ 0.000000] s5 : 0000000000000000 s6 : 0000000200000100 s7 : 0000000000000001
[ 0.000000] s8 : ffffffe07fe04040 s9 : ffffffff81a22c80 s10: 0000000000001000
[ 0.000000] s11: 0000000000000004 t3 : 0000000000000001 t4 : 0000000000000008
[ 0.000000] t5 : ffffffcf04000808 t6 : ffffffe3ffddf188
[ 0.000000] status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000002
[ 0.000000] [<ffffffff80007240>] riscv_cpuid_to_hartid_mask+0x6/0xae
[ 0.000000] [<ffffffff80009474>] sbi_remote_fence_i+0x1e/0x26
[ 0.000000] [<ffffffff8000b8f4>] flush_icache_all+0x12/0x1a
[ 0.000000] [<ffffffff8000666c>] patch_text_nosync+0x26/0x32
[ 0.000000] [<ffffffff8000884e>] ftrace_init_nop+0x52/0x8c
[ 0.000000] [<ffffffff800f051e>] ftrace_process_locs.isra.0+0x29c/0x360
[ 0.000000] [<ffffffff80a0e3c6>] ftrace_init+0x80/0x130
[ 0.000000] [<ffffffff80a00f8c>] start_kernel+0x5c4/0x8f6
[ 0.000000] ---[ end trace f67eb9af4d8d492b ]---
[ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task!
[ 0.000000] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]---
While ftrace is looping over a list of addresses to patch, it always failed
when patching the same function: riscv_cpuid_to_hartid_mask. Looking at the
backtrace, the illegal instruction is encountered in this same function.
However, patch_text_nosync, after patching the instructions, calls
flush_icache_range. But looking at what happens in this function:
flush_icache_range -> flush_icache_all
-> sbi_remote_fence_i
-> __sbi_rfence_v02
-> riscv_cpuid_to_hartid_mask
The icache and dcache of the current cpu are never synchronized between the
patching of riscv_cpuid_to_hartid_mask and calling this same function.
So fix this by flushing the current cpu's icache before asking for the other
cpus to do the same. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_taprio: properly cancel timer from taprio_destroy()
There is a comment in qdisc_create() about us not calling ops->reset()
in some cases.
err_out4:
/*
* Any broken qdiscs that would require a ops->reset() here?
* The qdisc was never in action so it shouldn't be necessary.
*/
As taprio sets a timer before actually receiving a packet, we need
to cancel it from ops->destroy, just in case ops->reset has not
been called.
syzbot reported:
ODEBUG: free active (active state 0) object type: hrtimer hint: advance_sched+0x0/0x9a0 arch/x86/include/asm/atomic64_64.h:22
WARNING: CPU: 0 PID: 8441 at lib/debugobjects.c:505 debug_print_object+0x16e/0x250 lib/debugobjects.c:505
Modules linked in:
CPU: 0 PID: 8441 Comm: syz-executor813 Not tainted 5.14.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:debug_print_object+0x16e/0x250 lib/debugobjects.c:505
Code: ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 af 00 00 00 48 8b 14 dd e0 d3 e3 89 4c 89 ee 48 c7 c7 e0 c7 e3 89 e8 5b 86 11 05 <0f> 0b 83 05 85 03 92 09 01 48 83 c4 18 5b 5d 41 5c 41 5d 41 5e c3
RSP: 0018:ffffc9000130f330 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000
RDX: ffff88802baeb880 RSI: ffffffff815d87b5 RDI: fffff52000261e58
RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff815d25ee R11: 0000000000000000 R12: ffffffff898dd020
R13: ffffffff89e3ce20 R14: ffffffff81653630 R15: dffffc0000000000
FS: 0000000000f0d300(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffb64b3e000 CR3: 0000000036557000 CR4: 00000000001506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
__debug_check_no_obj_freed lib/debugobjects.c:987 [inline]
debug_check_no_obj_freed+0x301/0x420 lib/debugobjects.c:1018
slab_free_hook mm/slub.c:1603 [inline]
slab_free_freelist_hook+0x171/0x240 mm/slub.c:1653
slab_free mm/slub.c:3213 [inline]
kfree+0xe4/0x540 mm/slub.c:4267
qdisc_create+0xbcf/0x1320 net/sched/sch_api.c:1299
tc_modify_qdisc+0x4c8/0x1a60 net/sched/sch_api.c:1663
rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5571
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504
netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1340
netlink_sendmsg+0x86d/0xdb0 net/netlink/af_netlink.c:1929
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:724
____sys_sendmsg+0x6e8/0x810 net/socket.c:2403
___sys_sendmsg+0xf3/0x170 net/socket.c:2457
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2486
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/edid: In connector_bad_edid() cap num_of_ext by num_blocks read
In commit e11f5bd8228f ("drm: Add support for DP 1.4 Compliance edid
corruption test") the function connector_bad_edid() started assuming
that the memory for the EDID passed to it was big enough to hold
`edid[0x7e] + 1` blocks of data (1 extra for the base block). It
completely ignored the fact that the function was passed `num_blocks`
which indicated how much memory had been allocated for the EDID.
Let's fix this by adding a bounds check.
This is important for handling the case where there's an error in the
first block of the EDID. In that case we will call
connector_bad_edid() without having re-allocated memory based on
`edid[0x7e]`. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: schedutil: Use kobject release() method to free sugov_tunables
The struct sugov_tunables is protected by the kobject, so we can't free
it directly. Otherwise we would get a call trace like this:
ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x30
WARNING: CPU: 3 PID: 720 at lib/debugobjects.c:505 debug_print_object+0xb8/0x100
Modules linked in:
CPU: 3 PID: 720 Comm: a.sh Tainted: G W 5.14.0-rc1-next-20210715-yocto-standard+ #507
Hardware name: Marvell OcteonTX CN96XX board (DT)
pstate: 40400009 (nZcv daif +PAN -UAO -TCO BTYPE=--)
pc : debug_print_object+0xb8/0x100
lr : debug_print_object+0xb8/0x100
sp : ffff80001ecaf910
x29: ffff80001ecaf910 x28: ffff00011b10b8d0 x27: ffff800011043d80
x26: ffff00011a8f0000 x25: ffff800013cb3ff0 x24: 0000000000000000
x23: ffff80001142aa68 x22: ffff800011043d80 x21: ffff00010de46f20
x20: ffff800013c0c520 x19: ffff800011d8f5b0 x18: 0000000000000010
x17: 6e6968207473696c x16: 5f72656d6974203a x15: 6570797420746365
x14: 6a626f2029302065 x13: 303378302f307830 x12: 2b6e665f72656d69
x11: ffff8000124b1560 x10: ffff800012331520 x9 : ffff8000100ca6b0
x8 : 000000000017ffe8 x7 : c0000000fffeffff x6 : 0000000000000001
x5 : ffff800011d8c000 x4 : ffff800011d8c740 x3 : 0000000000000000
x2 : ffff0001108301c0 x1 : ab3c90eedf9c0f00 x0 : 0000000000000000
Call trace:
debug_print_object+0xb8/0x100
__debug_check_no_obj_freed+0x1c0/0x230
debug_check_no_obj_freed+0x20/0x88
slab_free_freelist_hook+0x154/0x1c8
kfree+0x114/0x5d0
sugov_exit+0xbc/0xc0
cpufreq_exit_governor+0x44/0x90
cpufreq_set_policy+0x268/0x4a8
store_scaling_governor+0xe0/0x128
store+0xc0/0xf0
sysfs_kf_write+0x54/0x80
kernfs_fop_write_iter+0x128/0x1c0
new_sync_write+0xf0/0x190
vfs_write+0x2d4/0x478
ksys_write+0x74/0x100
__arm64_sys_write+0x24/0x30
invoke_syscall.constprop.0+0x54/0xe0
do_el0_svc+0x64/0x158
el0_svc+0x2c/0xb0
el0t_64_sync_handler+0xb0/0xb8
el0t_64_sync+0x198/0x19c
irq event stamp: 5518
hardirqs last enabled at (5517): [<ffff8000100cbd7c>] console_unlock+0x554/0x6c8
hardirqs last disabled at (5518): [<ffff800010fc0638>] el1_dbg+0x28/0xa0
softirqs last enabled at (5504): [<ffff8000100106e0>] __do_softirq+0x4d0/0x6c0
softirqs last disabled at (5483): [<ffff800010049548>] irq_exit+0x1b0/0x1b8
So split the original sugov_tunables_free() into two functions,
sugov_clear_global_tunables() is just used to clear the global_tunables
and the new sugov_tunables_free() is used as kobj_type::release to
release the sugov_tunables safely. |
