| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
dev/parport: fix the array out-of-bounds risk
Fixed array out-of-bounds issues caused by sprintf
by replacing it with snprintf for safer data copying,
ensuring the destination buffer is not overflowed.
Below is the stack trace I encountered during the actual issue:
[ 66.575408s] [pid:5118,cpu4,QThread,4]Kernel panic - not syncing: stack-protector:
Kernel stack is corrupted in: do_hardware_base_addr+0xcc/0xd0 [parport]
[ 66.575408s] [pid:5118,cpu4,QThread,5]CPU: 4 PID: 5118 Comm:
QThread Tainted: G S W O 5.10.97-arm64-desktop #7100.57021.2
[ 66.575439s] [pid:5118,cpu4,QThread,6]TGID: 5087 Comm: EFileApp
[ 66.575439s] [pid:5118,cpu4,QThread,7]Hardware name: HUAWEI HUAWEI QingYun
PGUX-W515x-B081/SP1PANGUXM, BIOS 1.00.07 04/29/2024
[ 66.575439s] [pid:5118,cpu4,QThread,8]Call trace:
[ 66.575469s] [pid:5118,cpu4,QThread,9] dump_backtrace+0x0/0x1c0
[ 66.575469s] [pid:5118,cpu4,QThread,0] show_stack+0x14/0x20
[ 66.575469s] [pid:5118,cpu4,QThread,1] dump_stack+0xd4/0x10c
[ 66.575500s] [pid:5118,cpu4,QThread,2] panic+0x1d8/0x3bc
[ 66.575500s] [pid:5118,cpu4,QThread,3] __stack_chk_fail+0x2c/0x38
[ 66.575500s] [pid:5118,cpu4,QThread,4] do_hardware_base_addr+0xcc/0xd0 [parport] |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Take return from set_memory_ro() into account with bpf_prog_lock_ro()
set_memory_ro() can fail, leaving memory unprotected.
Check its return and take it into account as an error. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Mark bpf prog stack with kmsan_unposion_memory in interpreter mode
syzbot reported uninit memory usages during map_{lookup,delete}_elem.
==========
BUG: KMSAN: uninit-value in __dev_map_lookup_elem kernel/bpf/devmap.c:441 [inline]
BUG: KMSAN: uninit-value in dev_map_lookup_elem+0xf3/0x170 kernel/bpf/devmap.c:796
__dev_map_lookup_elem kernel/bpf/devmap.c:441 [inline]
dev_map_lookup_elem+0xf3/0x170 kernel/bpf/devmap.c:796
____bpf_map_lookup_elem kernel/bpf/helpers.c:42 [inline]
bpf_map_lookup_elem+0x5c/0x80 kernel/bpf/helpers.c:38
___bpf_prog_run+0x13fe/0xe0f0 kernel/bpf/core.c:1997
__bpf_prog_run256+0xb5/0xe0 kernel/bpf/core.c:2237
==========
The reproducer should be in the interpreter mode.
The C reproducer is trying to run the following bpf prog:
0: (18) r0 = 0x0
2: (18) r1 = map[id:49]
4: (b7) r8 = 16777216
5: (7b) *(u64 *)(r10 -8) = r8
6: (bf) r2 = r10
7: (07) r2 += -229
^^^^^^^^^^
8: (b7) r3 = 8
9: (b7) r4 = 0
10: (85) call dev_map_lookup_elem#1543472
11: (95) exit
It is due to the "void *key" (r2) passed to the helper. bpf allows uninit
stack memory access for bpf prog with the right privileges. This patch
uses kmsan_unpoison_memory() to mark the stack as initialized.
This should address different syzbot reports on the uninit "void *key"
argument during map_{lookup,delete}_elem. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: add bounds checking to xlog_recover_process_data
There is a lack of verification of the space occupied by fixed members
of xlog_op_header in the xlog_recover_process_data.
We can create a crafted image to trigger an out of bounds read by
following these steps:
1) Mount an image of xfs, and do some file operations to leave records
2) Before umounting, copy the image for subsequent steps to simulate
abnormal exit. Because umount will ensure that tail_blk and
head_blk are the same, which will result in the inability to enter
xlog_recover_process_data
3) Write a tool to parse and modify the copied image in step 2
4) Make the end of the xlog_op_header entries only 1 byte away from
xlog_rec_header->h_size
5) xlog_rec_header->h_num_logops++
6) Modify xlog_rec_header->h_crc
Fix:
Add a check to make sure there is sufficient space to access fixed members
of xlog_op_header. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: don't walk off the end of a directory data block
This adds sanity checks for xfs_dir2_data_unused and xfs_dir2_data_entry
to make sure don't stray beyond valid memory region. Before patching, the
loop simply checks that the start offset of the dup and dep is within the
range. So in a crafted image, if last entry is xfs_dir2_data_unused, we
can change dup->length to dup->length-1 and leave 1 byte of space. In the
next traversal, this space will be considered as dup or dep. We may
encounter an out of bound read when accessing the fixed members.
In the patch, we make sure that the remaining bytes large enough to hold
an unused entry before accessing xfs_dir2_data_unused and
xfs_dir2_data_unused is XFS_DIR2_DATA_ALIGN byte aligned. We also make
sure that the remaining bytes large enough to hold a dirent with a
single-byte name before accessing xfs_dir2_data_entry. |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: xattr: fix buffer overflow for invalid xattr
When an xattr size is not what is expected, it is printed out to the
kernel log in hex format as a form of debugging. But when that xattr
size is bigger than the expected size, printing it out can cause an
access off the end of the buffer.
Fix this all up by properly restricting the size of the debug hex dump
in the kernel log. |
| In the Linux kernel, the following vulnerability has been resolved:
kdb: Fix buffer overflow during tab-complete
Currently, when the user attempts symbol completion with the Tab key, kdb
will use strncpy() to insert the completed symbol into the command buffer.
Unfortunately it passes the size of the source buffer rather than the
destination to strncpy() with predictably horrible results. Most obviously
if the command buffer is already full but cp, the cursor position, is in
the middle of the buffer, then we will write past the end of the supplied
buffer.
Fix this by replacing the dubious strncpy() calls with memmove()/memcpy()
calls plus explicit boundary checks to make sure we have enough space
before we start moving characters around. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: fix nfc_llcp_setsockopt() unsafe copies
syzbot reported unsafe calls to copy_from_sockptr() [1]
Use copy_safe_from_sockptr() instead.
[1]
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset include/linux/sockptr.h:49 [inline]
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr include/linux/sockptr.h:55 [inline]
BUG: KASAN: slab-out-of-bounds in nfc_llcp_setsockopt+0x6c2/0x850 net/nfc/llcp_sock.c:255
Read of size 4 at addr ffff88801caa1ec3 by task syz-executor459/5078
CPU: 0 PID: 5078 Comm: syz-executor459 Not tainted 6.8.0-syzkaller-08951-gfe46a7dd189e #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x169/0x550 mm/kasan/report.c:488
kasan_report+0x143/0x180 mm/kasan/report.c:601
copy_from_sockptr_offset include/linux/sockptr.h:49 [inline]
copy_from_sockptr include/linux/sockptr.h:55 [inline]
nfc_llcp_setsockopt+0x6c2/0x850 net/nfc/llcp_sock.c:255
do_sock_setsockopt+0x3b1/0x720 net/socket.c:2311
__sys_setsockopt+0x1ae/0x250 net/socket.c:2334
__do_sys_setsockopt net/socket.c:2343 [inline]
__se_sys_setsockopt net/socket.c:2340 [inline]
__x64_sys_setsockopt+0xb5/0xd0 net/socket.c:2340
do_syscall_64+0xfd/0x240
entry_SYSCALL_64_after_hwframe+0x6d/0x75
RIP: 0033:0x7f7fac07fd89
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 91 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fff660eb788 EFLAGS: 00000246 ORIG_RAX: 0000000000000036
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f7fac07fd89
RDX: 0000000000000000 RSI: 0000000000000118 RDI: 0000000000000004
RBP: 0000000000000000 R08: 0000000000000002 R09: 0000000000000000
R10: 0000000020000a80 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: make sure that WRITTEN is set on all metadata blocks
We previously would call btrfs_check_leaf() if we had the check
integrity code enabled, which meant that we could only run the extended
leaf checks if we had WRITTEN set on the header flags.
This leaves a gap in our checking, because we could end up with
corruption on disk where WRITTEN isn't set on the leaf, and then the
extended leaf checks don't get run which we rely on to validate all of
the item pointers to make sure we don't access memory outside of the
extent buffer.
However, since 732fab95abe2 ("btrfs: check-integrity: remove
CONFIG_BTRFS_FS_CHECK_INTEGRITY option") we no longer call
btrfs_check_leaf() from btrfs_mark_buffer_dirty(), which means we only
ever call it on blocks that are being written out, and thus have WRITTEN
set, or that are being read in, which should have WRITTEN set.
Add checks to make sure we have WRITTEN set appropriately, and then make
sure __btrfs_check_leaf() always does the item checking. This will
protect us from file systems that have been corrupted and no longer have
WRITTEN set on some of the blocks.
This was hit on a crafted image tweaking the WRITTEN bit and reported by
KASAN as out-of-bound access in the eb accessors. The example is a dir
item at the end of an eb.
[2.042] BTRFS warning (device loop1): bad eb member start: ptr 0x3fff start 30572544 member offset 16410 size 2
[2.040] general protection fault, probably for non-canonical address 0xe0009d1000000003: 0000 [#1] PREEMPT SMP KASAN NOPTI
[2.537] KASAN: maybe wild-memory-access in range [0x0005088000000018-0x000508800000001f]
[2.729] CPU: 0 PID: 2587 Comm: mount Not tainted 6.8.2 #1
[2.729] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
[2.621] RIP: 0010:btrfs_get_16+0x34b/0x6d0
[2.621] RSP: 0018:ffff88810871fab8 EFLAGS: 00000206
[2.621] RAX: 0000a11000000003 RBX: ffff888104ff8720 RCX: ffff88811b2288c0
[2.621] RDX: dffffc0000000000 RSI: ffffffff81dd8aca RDI: ffff88810871f748
[2.621] RBP: 000000000000401a R08: 0000000000000001 R09: ffffed10210e3ee9
[2.621] R10: ffff88810871f74f R11: 205d323430333737 R12: 000000000000001a
[2.621] R13: 000508800000001a R14: 1ffff110210e3f5d R15: ffffffff850011e8
[2.621] FS: 00007f56ea275840(0000) GS:ffff88811b200000(0000) knlGS:0000000000000000
[2.621] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[2.621] CR2: 00007febd13b75c0 CR3: 000000010bb50000 CR4: 00000000000006f0
[2.621] Call Trace:
[2.621] <TASK>
[2.621] ? show_regs+0x74/0x80
[2.621] ? die_addr+0x46/0xc0
[2.621] ? exc_general_protection+0x161/0x2a0
[2.621] ? asm_exc_general_protection+0x26/0x30
[2.621] ? btrfs_get_16+0x33a/0x6d0
[2.621] ? btrfs_get_16+0x34b/0x6d0
[2.621] ? btrfs_get_16+0x33a/0x6d0
[2.621] ? __pfx_btrfs_get_16+0x10/0x10
[2.621] ? __pfx_mutex_unlock+0x10/0x10
[2.621] btrfs_match_dir_item_name+0x101/0x1a0
[2.621] btrfs_lookup_dir_item+0x1f3/0x280
[2.621] ? __pfx_btrfs_lookup_dir_item+0x10/0x10
[2.621] btrfs_get_tree+0xd25/0x1910
[ copy more details from report ] |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: dev-replace: properly validate device names
There's a syzbot report that device name buffers passed to device
replace are not properly checked for string termination which could lead
to a read out of bounds in getname_kernel().
Add a helper that validates both source and target device name buffers.
For devid as the source initialize the buffer to empty string in case
something tries to read it later.
This was originally analyzed and fixed in a different way by Edward Adam
Davis (see links). |
| A vulnerability was found in PX4 PX4-Autopilot up to 1.16.0. Affected by this issue is the function MavlinkLogHandler::state_listing/MavlinkLogHandler::log_entry_from_id of the file src/modules/mavlink/mavlink_log_handler.cpp. The manipulation results in stack-based buffer overflow. The attack is only possible with local access. The patch is identified as 338595edd1d235efd885fd5e9f45e7f9dcf4013d. It is best practice to apply a patch to resolve this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: prevent out-of-bounds array speculation when closing a file descriptor
Google-Bug-Id: 114199369 |
| In the Linux kernel, the following vulnerability has been resolved:
perf/core: Bail out early if the request AUX area is out of bound
When perf-record with a large AUX area, e.g 4GB, it fails with:
#perf record -C 0 -m ,4G -e arm_spe_0// -- sleep 1
failed to mmap with 12 (Cannot allocate memory)
and it reveals a WARNING with __alloc_pages():
------------[ cut here ]------------
WARNING: CPU: 44 PID: 17573 at mm/page_alloc.c:5568 __alloc_pages+0x1ec/0x248
Call trace:
__alloc_pages+0x1ec/0x248
__kmalloc_large_node+0xc0/0x1f8
__kmalloc_node+0x134/0x1e8
rb_alloc_aux+0xe0/0x298
perf_mmap+0x440/0x660
mmap_region+0x308/0x8a8
do_mmap+0x3c0/0x528
vm_mmap_pgoff+0xf4/0x1b8
ksys_mmap_pgoff+0x18c/0x218
__arm64_sys_mmap+0x38/0x58
invoke_syscall+0x50/0x128
el0_svc_common.constprop.0+0x58/0x188
do_el0_svc+0x34/0x50
el0_svc+0x34/0x108
el0t_64_sync_handler+0xb8/0xc0
el0t_64_sync+0x1a4/0x1a8
'rb->aux_pages' allocated by kcalloc() is a pointer array which is used to
maintains AUX trace pages. The allocated page for this array is physically
contiguous (and virtually contiguous) with an order of 0..MAX_ORDER. If the
size of pointer array crosses the limitation set by MAX_ORDER, it reveals a
WARNING.
So bail out early with -ENOMEM if the request AUX area is out of bound,
e.g.:
#perf record -C 0 -m ,4G -e arm_spe_0// -- sleep 1
failed to mmap with 12 (Cannot allocate memory) |
| In the Linux kernel, the following vulnerability has been resolved:
atl1c: Work around the DMA RX overflow issue
This is based on alx driver commit 881d0327db37 ("net: alx: Work around
the DMA RX overflow issue").
The alx and atl1c drivers had RX overflow error which was why a custom
allocator was created to avoid certain addresses. The simpler workaround
then created for alx driver, but not for atl1c due to lack of tester.
Instead of using a custom allocator, check the allocated skb address and
use skb_reserve() to move away from problematic 0x...fc0 address.
Tested on AR8131 on Acer 4540. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd: Fix UBSAN array-index-out-of-bounds for Polaris and Tonga
For pptable structs that use flexible array sizes, use flexible arrays. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd: Fix UBSAN array-index-out-of-bounds for SMU7
For pptable structs that use flexible array sizes, use flexible arrays. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd: check num of link levels when update pcie param
In SR-IOV environment, the value of pcie_table->num_of_link_levels will
be 0, and num_of_levels - 1 will cause array index out of bounds |
| In the Linux kernel, the following vulnerability has been resolved:
fs/jfs: Add check for negative db_l2nbperpage
l2nbperpage is log2(number of blks per page), and the minimum legal
value should be 0, not negative.
In the case of l2nbperpage being negative, an error will occur
when subsequently used as shift exponent.
Syzbot reported this bug:
UBSAN: shift-out-of-bounds in fs/jfs/jfs_dmap.c:799:12
shift exponent -16777216 is negative |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: fix array-index-out-of-bounds in diAlloc
Currently there is not check against the agno of the iag while
allocating new inodes to avoid fragmentation problem. Added the check
which is required. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/jfs: Add validity check for db_maxag and db_agpref
Both db_maxag and db_agpref are used as the index of the
db_agfree array, but there is currently no validity check for
db_maxag and db_agpref, which can lead to errors.
The following is related bug reported by Syzbot:
UBSAN: array-index-out-of-bounds in fs/jfs/jfs_dmap.c:639:20
index 7936 is out of range for type 'atomic_t[128]'
Add checking that the values of db_maxag and db_agpref are valid
indexes for the db_agfree array. |
