| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Parameters are not validated or sanitized, and are later used in various internal operations. |
| A vulnerability was identified in the handling of Bluetooth Low Energy (BLE) fixed channels (such as SMP or ATT). Specifically, an attacker could exploit a flaw that causes the BLE target (i.e., the device under attack) to attempt to disconnect a fixed channel, which is not allowed per the Bluetooth specification. This leads to undefined behavior, including potential assertion failures, crashes, or memory corruption, depending on the BLE stack implementation. |
| The Service Finder Bookings plugin for WordPress is vulnerable to privilege escalation via account takeover in all versions up to, and including, 6.0. This is due to the plugin not properly validating a user's identity prior to claiming a business when using the claim_business AJAX action. This makes it possible for unauthenticated attackers to login as any user including admins. Please note that subscriber privileges or brute-forcing are needed when completing the business takeover. The claim_id is needed to takeover the admin account, but brute-forcing is a practical approach to obtaining valid IDs. |
| The Keras Model.load_model method can be exploited to achieve arbitrary code execution, even with safe_mode=True.
One can create a specially crafted .keras model archive that, when loaded via Model.load_model, will trigger arbitrary code to be executed. This is achieved by crafting a special config.json (a file within the .keras archive) that will invoke keras.config.enable_unsafe_deserialization() to disable safe mode. Once safe mode is disable, one can use the Lambda layer feature of keras, which allows arbitrary Python code in the form of pickled code. Both can appear in the same archive. Simply the keras.config.enable_unsafe_deserialization() needs to appear first in the archive and the Lambda with arbitrary code needs to be second. |
| Improper Handling of Length Parameter Inconsistency vulnerability in Mitsubishi Electric Corporation MELSEC-Q Series Q03UDVCPU, Q04UDVCPU, Q06UDVCPU, Q13UDVCPU, Q26UDVCPU, Q04UDPVCPU, Q06UDPVCPU, Q13UDPVCPU, and Q26UDPVCPU with the first 5 digits of serial No. "24082" to "27081" allows a remote attacker to cause an integer underflow by sending specially crafted packets to the affected product to stop Ethernet communication and the execution of control programs on the product, when the user authentication function is enabled. The user authentication function is enabled by default only when settings are configured by GX Works2, which complies with the Cybersecurity Law of the People's Republic of China, and is normally disabled. |
| The function responsible for handling BLE connection responses does not verify whether a response is expected—that is, whether the device has initiated a connection request. Instead, it relies solely on identifier matching. |
| The Keras Model.load_model method can be exploited to achieve arbitrary code execution, even with safe_mode=True.
One can create a specially crafted .h5/.hdf5 model archive that, when loaded via Model.load_model, will trigger arbitrary code to be executed.
This is achieved by crafting a special .h5 archive file that uses the Lambda layer feature of keras which allows arbitrary Python code in the form of pickled code. The vulnerability comes from the fact that the safe_mode=True option is not honored when reading .h5 archives.
Note that the .h5/.hdf5 format is a legacy format supported by Keras 3 for backwards compatibility. |
| The Embed PDF for WPForms plugin for WordPress is vulnerable to arbitrary file uploads due to missing file type validation in the ajax_handler_download_pdf_media function in all versions up to, and including, 1.1.5. This makes it possible for authenticated attackers, with Subscriber-level access and above, to upload arbitrary files on the affected site's server which may make remote code execution possible. |
| URL Redirection to Untrusted Site ('Open Redirect') vulnerability in Pusula Communication Information Internet Industry and Trade Ltd. Co. Manageable Email Sending System allows Exploiting Trust in Client.This issue affects Manageable Email Sending System: from <=2025.06 before 2025.08.06. |
| Grafana is an open-source platform for monitoring and observability. Grafana-Zabbix is a plugin for Grafana allowing to visualize monitoring data from Zabbix and create dashboards for analyzing metrics and realtime monitoring.
Versions 5.2.1 and below contained a ReDoS vulnerability via user-supplied regex query which could causes CPU usage to max out. This vulnerability is fixed in version 6.0.0. |
| Tronclass developed by WisdomGarden has an Insecure Direct object Reference vulnerability, allowing remote attackers with regular privilege to modify a specific parameter to access other users' files. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: prevent NULL pointer dereference in UTF16 conversion
There can be a NULL pointer dereference bug here. NULL is passed to
__cifs_sfu_make_node without checks, which passes it unchecked to
cifs_strndup_to_utf16, which in turn passes it to
cifs_local_to_utf16_bytes where '*from' is dereferenced, causing a crash.
This patch adds a check for NULL 'src' in cifs_strndup_to_utf16 and
returns NULL early to prevent dereferencing NULL pointer.
Found by Linux Verification Center (linuxtesting.org) with SVACE |
| A security flaw has been discovered in APEUni PTE Exam Practice App up to 10.8.0 on Android. The impacted element is an unknown function of the file AndroidManifest.xml of the component com.ape_edication. The manipulation results in improper export of android application components. The attack requires a local approach. The exploit has been released to the public and may be exploited. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: move page table sync declarations to linux/pgtable.h
During our internal testing, we started observing intermittent boot
failures when the machine uses 4-level paging and has a large amount of
persistent memory:
BUG: unable to handle page fault for address: ffffe70000000034
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: 0002 [#1] SMP NOPTI
RIP: 0010:__init_single_page+0x9/0x6d
Call Trace:
<TASK>
__init_zone_device_page+0x17/0x5d
memmap_init_zone_device+0x154/0x1bb
pagemap_range+0x2e0/0x40f
memremap_pages+0x10b/0x2f0
devm_memremap_pages+0x1e/0x60
dev_dax_probe+0xce/0x2ec [device_dax]
dax_bus_probe+0x6d/0xc9
[... snip ...]
</TASK>
It turns out that the kernel panics while initializing vmemmap (struct
page array) when the vmemmap region spans two PGD entries, because the new
PGD entry is only installed in init_mm.pgd, but not in the page tables of
other tasks.
And looking at __populate_section_memmap():
if (vmemmap_can_optimize(altmap, pgmap))
// does not sync top level page tables
r = vmemmap_populate_compound_pages(pfn, start, end, nid, pgmap);
else
// sync top level page tables in x86
r = vmemmap_populate(start, end, nid, altmap);
In the normal path, vmemmap_populate() in arch/x86/mm/init_64.c
synchronizes the top level page table (See commit 9b861528a801 ("x86-64,
mem: Update all PGDs for direct mapping and vmemmap mapping changes")) so
that all tasks in the system can see the new vmemmap area.
However, when vmemmap_can_optimize() returns true, the optimized path
skips synchronization of top-level page tables. This is because
vmemmap_populate_compound_pages() is implemented in core MM code, which
does not handle synchronization of the top-level page tables. Instead,
the core MM has historically relied on each architecture to perform this
synchronization manually.
We're not the first party to encounter a crash caused by not-sync'd top
level page tables: earlier this year, Gwan-gyeong Mun attempted to address
the issue [1] [2] after hitting a kernel panic when x86 code accessed the
vmemmap area before the corresponding top-level entries were synced. At
that time, the issue was believed to be triggered only when struct page
was enlarged for debugging purposes, and the patch did not get further
updates.
It turns out that current approach of relying on each arch to handle the
page table sync manually is fragile because 1) it's easy to forget to sync
the top level page table, and 2) it's also easy to overlook that the
kernel should not access the vmemmap and direct mapping areas before the
sync.
# The solution: Make page table sync more code robust and harder to miss
To address this, Dave Hansen suggested [3] [4] introducing
{pgd,p4d}_populate_kernel() for updating kernel portion of the page tables
and allow each architecture to explicitly perform synchronization when
installing top-level entries. With this approach, we no longer need to
worry about missing the sync step, reducing the risk of future
regressions.
The new interface reuses existing ARCH_PAGE_TABLE_SYNC_MASK,
PGTBL_P*D_MODIFIED and arch_sync_kernel_mappings() facility used by
vmalloc and ioremap to synchronize page tables.
pgd_populate_kernel() looks like this:
static inline void pgd_populate_kernel(unsigned long addr, pgd_t *pgd,
p4d_t *p4d)
{
pgd_populate(&init_mm, pgd, p4d);
if (ARCH_PAGE_TABLE_SYNC_MASK & PGTBL_PGD_MODIFIED)
arch_sync_kernel_mappings(addr, addr);
}
It is worth noting that vmalloc() and apply_to_range() carefully
synchronizes page tables by calling p*d_alloc_track() and
arch_sync_kernel_mappings(), and thus they are not affected by
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm/64: define ARCH_PAGE_TABLE_SYNC_MASK and arch_sync_kernel_mappings()
Define ARCH_PAGE_TABLE_SYNC_MASK and arch_sync_kernel_mappings() to ensure
page tables are properly synchronized when calling p*d_populate_kernel().
For 5-level paging, synchronization is performed via
pgd_populate_kernel(). In 4-level paging, pgd_populate() is a no-op, so
synchronization is instead performed at the P4D level via
p4d_populate_kernel().
This fixes intermittent boot failures on systems using 4-level paging and
a large amount of persistent memory:
BUG: unable to handle page fault for address: ffffe70000000034
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: 0002 [#1] SMP NOPTI
RIP: 0010:__init_single_page+0x9/0x6d
Call Trace:
<TASK>
__init_zone_device_page+0x17/0x5d
memmap_init_zone_device+0x154/0x1bb
pagemap_range+0x2e0/0x40f
memremap_pages+0x10b/0x2f0
devm_memremap_pages+0x1e/0x60
dev_dax_probe+0xce/0x2ec [device_dax]
dax_bus_probe+0x6d/0xc9
[... snip ...]
</TASK>
It also fixes a crash in vmemmap_set_pmd() caused by accessing vmemmap
before sync_global_pgds() [1]:
BUG: unable to handle page fault for address: ffffeb3ff1200000
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: Oops: 0002 [#1] PREEMPT SMP NOPTI
Tainted: [W]=WARN
RIP: 0010:vmemmap_set_pmd+0xff/0x230
<TASK>
vmemmap_populate_hugepages+0x176/0x180
vmemmap_populate+0x34/0x80
__populate_section_memmap+0x41/0x90
sparse_add_section+0x121/0x3e0
__add_pages+0xba/0x150
add_pages+0x1d/0x70
memremap_pages+0x3dc/0x810
devm_memremap_pages+0x1c/0x60
xe_devm_add+0x8b/0x100 [xe]
xe_tile_init_noalloc+0x6a/0x70 [xe]
xe_device_probe+0x48c/0x740 [xe]
[... snip ...] |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: asus-wmi: Fix racy registrations
asus_wmi_register_driver() may be called from multiple drivers
concurrently, which can lead to the racy list operations, eventually
corrupting the memory and hitting Oops on some ASUS machines.
Also, the error handling is missing, and it forgot to unregister ACPI
lps0 dev ops in the error case.
This patch covers those issues by introducing a simple mutex at
acpi_wmi_register_driver() & *_unregister_driver, and adding the
proper call of asus_s2idle_check_unregister() in the error path. |
| A vulnerability was found in 07FLYCMS, 07FLY-CMS and 07FlyCRM up to 20250831. This issue affects some unknown processing of the file /index.php/Login/login. Performing manipulation of the argument Username results in sql injection. It is possible to initiate the attack remotely. The exploit has been made public and could be used. This product is published under multiple names. The vendor was contacted early about this disclosure but did not respond in any way. |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Beyaz Computer CityPlus allows Path Traversal.This issue affects CityPlus: before 24.29375. |
| The Miniorange OTP Verification with Firebase plugin for WordPress is vulnerable to privilege escalation due to a missing capability check on the 'handle_mofirebase_form_options' function in versions 3.1.0 to 3.6.2. This makes it possible for unauthenticated attackers to update the default role to Administrator. Premium features must be enabled in order to exploit the vulnerability. |
| An issue was discovered in Tenda AC6 US_AC6V1.0BR_V15.03.05.16_multi_TD01 allowing attackers to cause a denial of service via the funcname, funcpara1, funcpara2 parameters to the formSetCfm function (uri path: SetCfm). |
