| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: always wait for ordered extents to avoid OE races
[BUG]
Syzbot reported a bug that there can be conflicting OEs for the same
range:
BTRFS critical (device loop4): panic in insert_ordered_extent:264: overlapping ordered extents, existing oe file_offset 16384 num_bytes 430080 flags 0x1089, new oe file_offset 16384 num_bytes 430080 flags 0x80 (errno=-17 Object alrea[ 179.162726][ T6897] BTRFS critical (device loop4): panic in insert_ordered_extent:264: overlapping ordered extents, existing oe file_offset 16384 num_bytes 430080 flags 0x1089, new oe file_offset 16384 num_bytes 430080 flags 0x80 (errno=-17 Object already exists)
------------[ cut here ]------------
kernel BUG at fs/btrfs/ordered-data.c:264!
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/09/2026
RIP: 0010:btrfs_alloc_ordered_extent+0x943/0xad0
Call Trace:
<TASK>
cow_file_range+0x744/0x12a0
fallback_to_cow+0x5ea/0xa00
run_delalloc_nocow+0x110c/0x17a0
btrfs_run_delalloc_range+0xbe4/0x1c20
writepage_delalloc+0x104d/0x1ba0
btrfs_writepages+0x1667/0x28b0
do_writepages+0x338/0x560
filemap_fdatawrite_range+0x1f2/0x300
btrfs_fdatawrite_range+0x54/0xf0
btrfs_direct_write+0x6a0/0xc30
btrfs_do_write_iter+0x329/0x790
do_iter_readv_writev+0x624/0x8d0
vfs_writev+0x34c/0x990
__se_sys_pwritev2+0x17a/0x2a0
do_syscall_64+0x174/0x580
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
---[ end trace 0000000000000000 ]---
[CAUSE]
Since commit ff66fe666233 ("btrfs: fix incorrect buffered IO fallback
for append direct writes"), if the direct IO finished short, we will
revert the isize back to the original one, so that append writes can be
respected during the buffered fallback.
Normally we rely on lock_and_cleanup_extent_if_need() function during
buffered writeback to wait for any existing ordered extents.
But that ordered extent waiting only happens if the start_pos is inside
the isize.
Since we have reverted the isize during failed direct IO, we will not
wait for any ordered extents.
This means we can have a race where the direct IO OE is still in the
tree, finished but not yet removed, then we're inserting the OE for the
buffered write, causing the above crash.
[FIX]
Make the OE wait to be unconditional, to handle the reverted isize
situation.
And since lock_and_cleanup_extent_if_need() now either lock the
extents or return -EAGAIN, also remove the branches that handles
no-extent-locked cases, and rename it to remove the "_if_need" suffix.
The following micro benchmark shows the runtime difference for
btrfs_buffered_write(), doing `xfs_io -f -c "pwrite 0 1m"` workload,
all values are the average runtime in nano seconds.
function runtime | before | after
-----------------------------------+-------------+---------------
lock_and_cleanup_extent_if_need() | 58.2 | 183.0
btrfs_buffered_write() | 2115.6 | 2973.3
The overall runtime of btrfs_buffered_write() is still pretty
tiny (still less than 3 micro seconds), I'd say the extra cost is still
acceptable.
An alternative to fix this problem is to wait ordered extents during
iomap_end() where the isize revert is done.
But that solution will break nowait requirement, as if a nowait direct
IO finished short, we have to wait for the OEs unconditionally or the
next append buffered IO can still hit the same problem.
So here we have to move the wait cost to buffered write, but at least
the code is slightly more streamline. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: check if root is readonly when setting posix acl
For a filesystem which has btrfs read-only property set to true, all
write operations including acl and xattr should be denied. However, acl
can still be set even if btrfs ro property is true.
This happens because no function on the set_acl code path checks the root
is readonly or not. It was checked in btrfs_setxattr_trans() but got
removed in commit 353c2ea735e4 ("btrfs: remove redundant readonly root
check in btrfs_setxattr_trans")
That commit didn't check if all the callers properly check the root's
read-only flag. A previous fix is commit b51111271b03 ("btrfs: check if
root is readonly while setting security xattr").
Always check if the root is read-only before performing the set acl
operation. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: qgroup: fix a wrong length calculation in qgroup_free_reserved_data()
In that function, we round down the start position and round up the
ending position.
But during the calculation of @len, we use "round_up(start + len,
sectorsize)", which is the rounded up end position, not the rounded up
length.
Which results a much larger length, and later we are still using
"start + len", which is completely incorrect.
Fix it by declaring a local @aligned_start and @aligned_len and use them
instead. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, cgroup: Fix storage null-ptr-deref after replacing prog
Syzkaller reported a storage null-ptr-deref issue after replacing prog.
This occurs in the following scenario:
1. prog A, an empty prog, is attached to a cgrp.
2. prog B uses BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE and calls the
bpf_get_local_storage helper.
3. link_update is called to replace prog A with prog B.
The reason is that __cgroup_bpf_replace fails to alloc and assign the
required cgrp storage for the incoming replacement prog. Consequently,
the new prog inherits an uninit storage, leading to null-ptr-deref panic
when kick the new prog.
Fix this by rejecting a link update if new_prog's cgroup storage is
incompatible with link->prog. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix mmap_lock leak in irq_work path
stack_map_get_build_id_offset() introduced a per-CPU irq_work to defer
mmap_read_unlock() from NMI context, and bpf_find_vma() later reused the
same mmap_unlock_work. Both callers only check whether the work is busy
before taking mmap_lock, so a nested caller can reuse the slot before the
first caller queues it. Two read locks may then be acquired while only one
deferred unlock runs, leaking a read lock and blocking exit_mmap().
Reserve the per-CPU slot before mmap_read_trylock(). Use the same wrapper
in stackmap and bpf_find_vma() so both callers release the reservation on
trylock failure. Keep rejecting the slot while the irq_work remains busy.
Release it after the irq_work callback unlocks the mm. |
| In the Linux kernel, the following vulnerability has been resolved:
sunrpc: xprtsock: annotate shared socket callbacks with READ_ONCE/WRITE_ONCE
xprtsock replaces and restores sk->sk_data_ready and
sk->sk_write_space on live sockets with plain stores, and
xs_udp_do_set_buffer_size() invokes sk->sk_write_space via a plain
load. These callback pointers are shared with generic socket and
protocol paths that may read or invoke them concurrently, so xprtsock
needs the same READ_ONCE()/WRITE_ONCE() callback visibility contract
that the validated 4022 family applied elsewhere.
When SUNRPC takes over an AF_LOCAL, UDP, or TCP socket and later
restores the lower-socket callbacks during teardown, another CPU may
still hold an earlier callback snapshot. The plain replace/restore
pattern leaves the same visibility hole as the validated 4022 family,
so a stale snapshot can still invoke xs_data_ready() or
xs_udp_write_space() after the live callback fields have already been
restored to the lower-socket handlers.
Use WRITE_ONCE() for the shared sk_data_ready and sk_write_space
stores in xs_local_finish_connecting(), xs_udp_finish_connecting(),
xs_tcp_finish_connecting(), and xs_restore_old_callbacks(). Use
READ_ONCE() for the direct sk_write_space invocation in
xs_udp_do_set_buffer_size(). This matches the required callback
visibility contract while leaving adjacent sk_state_change and
sk_error_report handling unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
NFS: Return a delegation the client fails to record
When an NFS server grants a delegation in an OPEN reply,
nfs_inode_set_delegation() records it on the client. However, three
of its error flows return without sending DELEGRETURN.
A delegation can be relinquished only by DELEGRETURN (RFC 8881
Section 20.2.4), so dropping one silently leaves the server believing
the client still holds it. If the server happens to recall that
delegation, the client answers CB_RECALL with NFS4ERR_BADHANDLE
because it has no record of the stateid. The server revokes the
delegation and moves it onto its cl_revoked list, because the client
never sends the FREE_STATEID that would drain it. Every subsequent
SEQUENCE reply then carries SEQ4_STATUS_RECALLABLE_STATE_REVOKED,
and the client's state manager loops issuing TEST_STATEID across its
delegations without ever clearing the condition.
The window is easy to reach now that a server offers a write
delegation on any write OPEN: a delegation recalled for one opener
races a re-open that the server answers with a fresh write
delegation.
Instead of dropping it, hand the delegation back during these error
flows. |
| In the Linux kernel, the following vulnerability has been resolved:
amt: Don't support cross-netns setup.
When a lower device is unregistered, amt_device_event() tries
to unregister its upper AMT device, but it has two problems.
1. amt_lookup_upper_dev() looks up an upper device in the
lower device's netns only
2. amt_device_event() unregisters a single upper device only
If AMT device is created on a lower device in another netns,
removing the lower device triggers the splat below and gets
stuck until all upper devices are removed. [0]
The cross-netns setup seems unintentional considering 1. and
the following points:
* amt_link_setup() sets dev->netns_immutable to true
* skb_scrub_packet() is not called in the fast path
* iproute2 binary fails to find cross-netns lower device via
link-netns:
# ip -n ns1 link add amt0 link-netns ns2 type amt dev veth1
Cannot find device "veth1"
Instead of supporting it properly and preparing for per-netns
netdev unreg, let's forbid cross-netns setup.
Note that the problem 2. needs a separate fix.
[0]:
WARNING: net/core/dev.c:12518 at unregister_netdevice_many_notify+0x1cce/0x2250, CPU#48: ip/2031
Modules linked in:
CPU: 48 UID: 0 PID: 2031 Comm: ip Not tainted 7.2.0-rc5+ #27 PREEMPT(full)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
RIP: 0010:unregister_netdevice_many_notify (net/core/dev.c:12518)
Code: 89 ef e8 d5 52 ae fe e9 d0 f4 ff ff 48 8d 3d f9 3b 9c 02 48 c7 c6 c0 0b 63 84 ba ab 1f 00 00 67 48 0f b9 3a e9 65 ff ff ff 90 <0f> 0b 90 eb 81 48 8d 3d f6 3b 9c 02 48 c7 c6 c0 0b 63 84 ba e2 1f
RSP: 0018:ffffc90004abf160 EFLAGS: 00010212
RAX: ffff888104d38260 RBX: ffff88800b0911b8 RCX: dffffc0000000000
RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffffffff85b9f880
RBP: ffffc90004abf2d0 R08: ffffffff85b9f887 R09: 1ffffffff0b73f10
R10: dffffc0000000000 R11: fffffbfff0b73f11 R12: ffff88800b091d08
R13: ffff88800b091178 R14: dffffc0000000000 R15: ffff88800b091000
FS: 00007f555b86c600(0000) GS:ffff8881942a0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000562107d489c0 CR3: 0000000109a40002 CR4: 0000000000372ef0
Call Trace:
<TASK>
rtnl_dellink (net/core/rtnetlink.c:3632 net/core/rtnetlink.c:3674)
rtnetlink_rcv_msg (net/core/rtnetlink.c:7112)
netlink_rcv_skb (net/netlink/af_netlink.c:2556)
netlink_unicast (net/netlink/af_netlink.c:1319)
netlink_sendmsg (net/netlink/af_netlink.c:1900)
____sys_sendmsg (net/socket.c:775)
__sys_sendmsg (net/socket.c:2738)
do_syscall_64 (arch/x86/entry/syscall_64.c:63)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
...
unregister_netdevice: waiting for veth0 to become free. Usage count = 7
ref_tracker: netdev@ffff88800d7496d8 has 3/3 users at
__netdev_adjacent_dev_insert (./include/linux/netdevice.h:4525 ./include/linux/netdevice.h:4554 net/core/dev.c:8791)
__netdev_upper_dev_link (net/core/dev.c:8879 net/core/dev.c:8963)
netdev_upper_dev_link (net/core/dev.c:9009)
amt_newlink (drivers/net/amt.c:3321) |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-apple: Destroy the admin queue on removal
The admin queue is allocated with blk_mq_alloc_queue() but never
destroyed. nvme_free_ctrl() only drops the last reference and
blk_mq_exit_queue() and blk_sync_queue() never run: the hctx is never
moved to q->unused_hctx_list and the timeout timer and work stay armed on
a queue that is about to be freed which will eventually oops inside
blk_mq_timeout_work().
This can only be triggered when the controller fails to come up and is
then immediately torn down again which is why no one ever ran into this
before.
Let's just copy what the pcie driver does: unquiesce and destroy the admin
queue before nvme_uninit_ctrl().
With this the following WARN followed by a panic no longer happens:
WARNING: block/blk-mq.c:4390 at blk_mq_release+0x194/0x238, CPU#4: kworker/u34:4/119
CPU: 4 UID: 0 PID: 119 Comm: kworker/u34:4 Not tainted 7.2.0-rc1-dirty #248 PREEMPT
Hardware name: Apple Mac mini (M1, 2020) (DT)
Workqueue: nvme-wq apple_nvme_remove_dead_ctrl_work
pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : blk_mq_release+0x194/0x238
lr : blk_mq_release+0x58/0x238
sp : ffffc000833a3b50
x29: ffffc000833a3b50 x28: ffff80001d0450f8 x27: ffff800020c95200
x26: 0000000000000088 x25: 0000000000000000 x24: ffff800020f36805
x23: 0000000000000000 x22: ffffc00081a86878 x21: ffff800020be9c60
x20: 0000000000000000 x19: ffff800022501698 x18: 000000000000000a
x17: 7365757165722066 x16: 666f7265776f7020 x15: 0000000000000000
x14: 0000000000000028 x13: 0000000000004def x12: 0000000000000003
x11: 0000000000000000 x10: 0000000000000000 x9 : ffffc000805b4fc8
x8 : ffffc00081915820 x7 : ffffc00081c4f3c8 x6 : 0000000000000001
x5 : 0000000000000004 x4 : ffff800022498d80 x3 : ffffc000833a3b14
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff800022501698
Call trace:
blk_mq_release+0x194/0x238 (P)
blk_put_queue+0x8c/0xf0
nvme_free_ctrl+0x4c/0x260
device_release+0x44/0x128
kobject_put+0xa0/0x120
put_device+0x1c/0x40
nvme_uninit_ctrl+0x48/0x60
apple_nvme_remove+0x54/0xb0
platform_remove+0x28/0x40
device_remove+0x54/0x98
device_release_driver_internal+
device_release_driver+0x20/0x38
apple_nvme_remove_dead_ctrl_wor
process_one_work+0x1f4/0x770
worker_thread+0x1b8/0x360
kthread+0x140/0x160
ret_from_fork+0x10/0x20
irq event stamp: 448
hardirqs last enabled at (447):in_unlock_irqrestore+0x74/0x80
hardirqs last disabled at (448): [<ffffc000811cf5c0>] el1_brk64+0x20/0x60
softirqs last enabled at (0): [ess+0xb28/0x2698
softirqs last disabled at (0): [<0000000000000000>] 0x0
---[ end trace 0000000000000000
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Mem abort info:
ESR = 0x0000000096000005
EC = 0x25: DABT (current EL),
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x05: level 1 translation fault
Data abort info:
ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagA
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[0000000000000000] user address
Internal error: Oops: 0000000096000005 [#1] SMP
CPU: 7 UID: 0 PID: 54 Comm: kwor 7.2.0-rc1-dirty #248PREEMPT
Tainted: [W]=WARN
Hardware name: Apple Mac mini (M1, 2020) (DT)
Workqueue: kblockd blk_mq_timeou
pstate: 01400005 (nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : percpu_ref_tryget_many.cons
lr : percpu_ref_tryget_many.constprop.0+0xc0/0x168
sp : ffffc000829cbce0
x29: ffffc000829cbce0 x28: ffff800020be9f48 x27: ffff800013e503c0
x26: 0000000000000108 x25: 000009c05
x23: 0000000000000000 x22: ffffc000819f5000 x21: ffff800020be9f48
x20: ffff8001deda4808 x19: ffff8000a
x17: 00000000580e1fac x16: ffffc00082bbbb7c x15: 0000000000000000
x14: 0000000000000028 x13: 000000001
x11: 0000000000000000 x10: 0000000000000000 x9 : ffffc000829cbc20
x8 :
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: Don't leak the extension cell pointer in the bounce payload
The bounce_error_event() embeds the failed event in the bounce payload
by pointing data.ext.ptr at it. When that event is a queued
variable-length event, its own data.ext.ptr holds the address of its
first extension cell, put there by snd_seq_event_dup(). The payload
goes out verbatim through snd_seq_expand_var_event(), so the address
reaches userspace.
That is the same address commit 705dd6dcbc0e ("ALSA: seq: Clear
variable event pointer on read") removed from the event header. The
read path still clears it there, just above the call that expands the
payload.
Embed a sanitised copy instead, treated exactly as snd_seq_read()
treats the header. A stack copy is enough because delivery is
synchronous and snd_seq_event_dup() copies before returning.
An unprivileged client reaches this by setting SNDRV_SEQ_FILTER_BOUNCE,
queueing a variable-length event to a port that does not exist and
reading the bounce back. Eight bytes on 64-bit, from its own pool. |
| In the Linux kernel, the following vulnerability has been resolved:
firewire: core: fix memory leak in error path of build_tree()
In the error path of build_tree(), node instances can remain in the local
linked list when the function returns.
Whenever an invalid value is detected in the self ID sequence, each
allocated node instance is either an entry in the linked list or an
entry in the ports array of its parent node. Therefore, the allocate
node instances can be safely released by traversing the linked list from
its head.
Release the remaining node instances with for_each_fw_node() before
returning to the caller. |
| In the Linux kernel, the following vulnerability has been resolved:
clocksource/drivers/samsung_pwm: Switch to raw_spinlock_t type
Samsung PWM timer might be used as a clock source on some legacy systems.
When PREEMPT_RT is enabled on ARM, regular spinlock is converted to a
sleeping lock (mutex-based), which must not be used in atomic context
such as hard interrupt handlers. Switch the samsung_pwm_lock to the
raw_spinlock, which remains a true non-sleeping spinlock even
under PREEMPT_RT. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: fix max_qid race between configfs and controller allocation
The function nvmet_subsys_attr_qid_max_store() can race against
nvmet_alloc_ctrl() when a subsystem's max_qid limit is modified.
Suppose max_qid is currently 64. If nvmet_alloc_ctrl() executes:
ctrl->sqs = kzalloc_objs(struct nvmet_sq *, subsys->max_qid + 1);
and at this exact point, a userspace process changes max_qid to 128,
nvmet_subsys_attr_qid_max_store() will set the new max_qid value. It
attempts to delete active controllers to force a reconnect, but the
new controller won't be deleted because it hasn't been added to the
subsys->ctrls list yet.
nvmet_alloc_ctrl() then proceeds and adds the new controller to the
subsys->ctrls list. Later, when nvmet_install_queue() is called, it
will see max_qid set to 128, but the memory allocated for sqs is only
sized for 64 entries. This results in a KASAN out-of-bounds warning
and potential memory corruptions.
Fix this by protecting the queue allocations and list insertion in
nvmet_alloc_ctrl() with down_read(&nvmet_config_sem). Because
nvmet_subsys_attr_qid_max_store() acquires down_write(&nvmet_config_sem)
to modify the attribute, this safely prevents the configfs writer from
modifying max_qid during controller creation.
Copy the max_qid from the subsystem to the controller's structure
during the allocation; ctrl->max_qid never changes as long as the
controller remains in LIVE state, so this will prevent similar race
conditions. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate orphan slot during inode read
Patch series "ocfs2: validate active orphan slots during inode read".
OCFS2 trusts active ordinary and append-DIO orphan slots read from dinodes.
A corrupted slot can therefore index osb_orphan_wipes or the slot-local
system-inode cache outside their allocations before the corruption is
reported.
Patch 1 validates the ordinary orphan slot used by inode wipe processing.
Patch 2 validates the append-DIO orphan slot used by DIO completion and
orphan recovery. Both checks reject corrupt metadata at the existing inode
validation boundary.
This patch (of 2):
[BUG]
A corrupted dinode with OCFS2_ORPHANED_FL can carry an
i_orphaned_slot outside the mounted filesystem slot range.
ocfs2_wipe_inode() uses it to index osb_orphan_wipes before looking
up the orphan directory, causing an out-of-bounds memory access.
BUG: KASAN: slab-use-after-free in ocfs2_get_system_file_inode+0x780/0x820 fs/ocfs2/sysfile.c:102
Read of size 8 at addr ffff88800b767c00 by task kworker/u8:3/85
Call Trace:
...
ocfs2_get_system_file_inode+0x780/0x820 fs/ocfs2/sysfile.c:102
ocfs2_wipe_inode+0x292/0xf70 fs/ocfs2/inode.c:840
ocfs2_delete_inode fs/ocfs2/inode.c:1155 [inline]
ocfs2_evict_inode+0x6c9/0x1170 fs/ocfs2/inode.c:1295
evict+0x38e/0x8f0 fs/inode.c:810
iput_final fs/inode.c:1914 [inline]
iput fs/inode.c:1966 [inline]
iput+0x55b/0x8b0 fs/inode.c:1926
ocfs2_recover_orphans+0x610/0xe40 fs/ocfs2/journal.c:2374
ocfs2_complete_recovery+0x5af/0xd00 fs/ocfs2/journal.c:1373
...
[CAUSE]
ocfs2_validate_inode_block() validates i_suballoc_slot but leaves
the active ordinary orphan slot unchecked. Downstream consumers
assume that the value is smaller than osb->max_slots.
[FIX]
Reject an active i_orphaned_slot outside the slot range during
dinode validation, before the inode reaches orphan wipe processing. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate DIO orphan slot during inode read
[BUG]
A corrupted append-DIO dinode (high byte at offset 0xa1
corrupted from 0 to 1) can carry an i_dio_orphaned_slot
outside the mounted filesystem slot range and trigger a
use-after-free error:
BUG: KASAN: slab-use-after-free in ocfs2_get_system_file_inode+0x780/0x820 fs/ocfs2/sysfile.c:102
Read of size 8 at addr ffff88800b767c00 by task kworker/u8:3/85
Call Trace:
...
ocfs2_get_system_file_inode+0x780/0x820 fs/ocfs2/sysfile.c:102
ocfs2_wipe_inode+0x292/0xf70 fs/ocfs2/inode.c:840
ocfs2_delete_inode fs/ocfs2/inode.c:1155 [inline]
ocfs2_evict_inode+0x6c9/0x1170 fs/ocfs2/inode.c:1295
evict+0x38e/0x8f0 fs/inode.c:810
iput_final fs/inode.c:1914 [inline]
iput fs/inode.c:1966 [inline]
iput+0x55b/0x8b0 fs/inode.c:1926
ocfs2_recover_orphans+0x610/0xe40 fs/ocfs2/journal.c:2374
ocfs2_complete_recovery+0x5af/0xd00 fs/ocfs2/journal.c:1373
...
[CAUSE]
ocfs2_del_inode_from_orphan() uses i_dio_orphaned_slot to index the
slot-local system inode cache. The dinode validator does not check
this active slot, so an out-of-range value produces an invalid cache
entry pointer that is dereferenced as an inode pointer.
[FIX]
Reject an active i_dio_orphaned_slot outside the slot range during
dinode validation, before DIO orphan recovery can consume it. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: fix integer overflow in MFT cluster validation
In ntfs_init_from_boot(), the boot sector's MFT cluster numbers are
validated against the volume size with:
if (mlcn * sct_per_clst >= sectors ||
mlcn2 * sct_per_clst >= sectors)
goto out;
mlcn and mlcn2 are u64 fields read directly from the boot sector.
sct_per_clst is bounded above by 4096 (true_sectors_per_clst() plus
the is_power_of_2() check below it), but the multiplication is done
in u64 and wraps when mlcn (or mlcn2) is large enough -- e.g. mlcn
near 2^62 with sct_per_clst == 4 wraps to 0, which compares below
any non-zero 'sectors', so the check is bypassed and the malformed
record is accepted.
The accepted mlcn is then used unchanged in
sbi->mft.lbo = mlcn << cluster_bits;
In practice the resulting reads fail at the block layer (sb_bread()
returns NULL via grow_buffers()'s check_mul_overflow() guard), so
today this manifests as mount failing in odd places rather than as
something more dangerous, but the validation step is still wrong
and there is no reason for callers to rely on the block layer to
catch a value that should never have been accepted in the first
place.
Use check_mul_overflow() to compute the two sector positions and
fail the mount if either multiplication wraps; this preserves the
existing semantics (mlcn * sct_per_clst >= sectors) instead of
switching to division (mlcn >= sectors / sct_per_clst), which
would tighten the check at edge cases where 'sectors' is not a
multiple of sct_per_clst. The check_*_overflow() style is the
one ntfs3 already uses for similar on-disk arithmetic in
fs/ntfs3/run.c. |
| In the Linux kernel, the following vulnerability has been resolved:
null_blk: free zones array on device power-off
null_init_zoned_dev() allocates dev->zones when a zoned device is powered
on, but null_del_dev() never frees it on power-off; dev->zones is only
freed later in null_free_dev(), when the configfs directory is removed. If
the device is powered off and then on again, null_init_zoned_dev()
allocates a new array and overwrites the dev->zones pointer, leaking the
previous allocation each power cycle.
Free dev->zones in null_del_dev() via null_free_zoned_dev() to solve it.
And calling null_free_zoned_dev() in null_free_dev() is no longer necessary
because every caller already invokes null_del_dev() first: via
nullb_group_drop_item() before nullb_device_release(), in the
null_add_dev() error path of null_create_dev(), and in null_destroy_dev().
Remove the redundant call.
And take &lock around zone_cond_store() in the two store wrappers to
serialize dev->zones check-and-deref against its alloc/free, which already
run under &lock. The reason there was no problem before is that only
nullb_device_release() or null_exit() frees the dev->zones, which
guarantees that subsequent users won't access the configfs interface. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-iolatency: clear delay state when freeing policy data
io.latency can throttle a group which has no latency target of its own.
When a sibling misses its target, check_scale_change() scales down its
peers, and a peer that reaches queue depth one gets blkcg_use_delay()
called on it on every further scale-down, even with min_lat_nsec == 0.
iolatency_pd_offline() resets the target through
iolatency_set_min_lat_nsec(), which clears the delay only on a nonzero
to zero transition, so it never clears such a peer. Freeing the policy
data then leaves blkg->use_delay set and blkcg->congestion_count
elevated with nothing left that can drop it.
blk_cgroup_congested() then returns true for every task in that cgroup
and its descendants for as long as the cgroup lives: page_cache_sync_ra()
cuts readahead to a single page, page_cache_async_ra() skips it
altogether, and __folio_throttle_swaprate() takes swap_avail_lock and
schedules a throttle on anonymous folio allocation.
Clear the delay in iolatency_pd_free(). By then bio-held blkg
references have drained, or the queue is frozen for policy
deactivation, so check_scale_change() cannot re-arm it. The free
callback can also see policy data which was never attached to a blkg,
hence the pd->blkg check. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-iocost: clear delay state when freeing policy data
iocg_kick_delay() turns sufficiently large debt into an explicit
block-cgroup delay with blkcg_set_delay(), setting blkg->use_delay to
-1 and incrementing blkcg->congestion_count. Clearing it again depends
on iocg_kick_delay() running from the period timer, the waitq timer or
the issue path.
ioc_pd_free() removes the iocg from active_iocgs and cancels its waitq
timer, and no further bios can arrive, so once it has run nothing is
left which can reduce the debt and clear the delay. The blkcg stays
marked congested for the rest of its life.
blk_cgroup_congested() then returns true for every task in that cgroup
and its descendants: page_cache_sync_ra() cuts readahead to a single
page, page_cache_async_ra() skips it altogether, and
__folio_throttle_swaprate() takes swap_avail_lock and schedules a
throttle on anonymous folio allocation.
Clear it explicitly, after the list removal and the synchronous
hrtimer_cancel() so that neither timer processing nor an I/O path can
re-arm it. The free callback can also see policy data which was never
attached to a blkg, hence the pd->blkg check. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix deadlock in complain-mode change_hat
The use of change_hat when in complain mode can cause a deadlock
when the hat doesn't exist and a new learning profile is created
for the missing profile. This is because change_hat() has taken
the lock to search the hat list and creating the new learning
profile needs to take the lock to add it to the list.
From the bug report:
Originally found in 7.0.0 in LTS ubuntu 26.04 with pam_apparmor + su
in complain mode set to change hats. Then verified in newest
available vanilla kernel I've compiled to see if still present:
7.2-rc7 vanilla -> affected
checked also some other kernels:
6.18.44 vanilla -> affected
6.12.95 with debian patches -> unaffected
On systems without bug (for example 6.12.95 debian) it just prints:
aa_change_hat rc=0
On systems with bug, the executable always hangs, prints nothing and
becomes unkillable. (And once stuck this way, it will cause any
further hat changes to also cause the changing process to get stuck)
Then in syslog you can find hint about cause:
kernel: INFO: task hat:3409 blocked for more than 483 seconds.
kernel: Not tainted 7.2.0-rc7 #1
kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kernel: task:hat state:D stack:0 pid:3409 tgid:3409 ppid:2605 task_flags:0x400000 flags:0x00080800
kernel: Call Trace:
kernel: <TASK>
kernel: __schedule+0x48f/0xfe0
kernel: schedule+0x27/0xa0
kernel: schedule_preempt_disabled+0x15/0x30
kernel: __mutex_lock.constprop.0+0x569/0xa10
kernel: aa_new_learning_profile+0x15f/0x210
kernel: build_change_hat+0x19f/0x3b0
kernel: change_hat.isra.0+0x5dd/0xd60
kernel: aa_change_hat+0x2f3/0x710
kernel: aa_setprocattr_changehat+0x121/0x1f0
kernel: do_setattr+0x28c/0x340
kernel: apparmor_setselfattr+0x20/0x50
kernel: security_setselfattr+0xf6/0x110
kernel: __x64_sys_lsm_set_self_attr+0x53/0x90
kernel: do_syscall_64+0xdd/0x5e0
kernel: ? __mod_memcg_lruvec_state+0xfd/0x260
kernel: ? lruvec_stat_mod_folio+0x8d/0xd0
kernel: ? __folio_mod_stat+0x2d/0x90
kernel: ? map_anon_folio_pte_nopf+0xd1/0x1f0
kernel: ? do_anonymous_page+0x184/0xa10
kernel: ? __handle_mm_fault+0x805/0x870
kernel: ? count_memcg_events+0xef/0x230
kernel: ? handle_mm_fault+0x1f0/0x2f0
kernel: ? do_user_addr_fault+0x2bb/0x7b0
kernel: ? do_syscall_64+0x94/0x5e0
kernel: ? exc_page_fault+0x75/0x160
kernel: entry_SYSCALL_64_after_hwframe+0x76/0x7e
kernel: RIP: 0033:0x7f815e134c8d
kernel: RSP: 002b:00007fff6df94ea8 EFLAGS: 00000246 ORIG_RAX: 00000000000001cc
kernel: RAX: ffffffffffffffda RBX: 0000556d8c81d040 RCX: 00007f815e134c8d
kernel: RDX: 0000000000000046 RSI: 0000556d8c81d040 RDI: 0000000000000064
kernel: RBP: 00007fff6df94ef0 R08: 00007f815e212ac8 R09: 000000000000000c
kernel: R10: 0000000000000000 R11: 0000000000000246 R12: 0000556d8c81d010
kernel: R13: 0000000000000026 R14: 0000000000000046 R15: 0000000000000064
kernel: </TASK>
kernel: INFO: task hat:3409 is blocked on a mutex likely owned by task hat:3409.
To fix the issue, lift the locking out of the core of
aa_new_learning_profile(), introduce a wrapper function that takes the
lock where needed, and have build_change_hat() call the core function
that no longer takes the lock.
In addition fix 4 other issues introduced by commit
32e92764d6f8d ("apparmor: grab ns lock and refresh when looking up changehat child profiles")
- aa_get_profile_rcu() was replaced-by: aa_get_profile without the
accompanying rcu_dereference_protected()
- an extra aa_get_label(label) was introduced at the start of
change_hat() without an accompanying aa_put_label() causing a
reference count leak.
- a reference count leak was introduced in the label_is_stale(label)
case, where the newest profile would be leaked instead of the
label passed to the function.
- a potential UAF when the lookup walks up the tree with new_ns != ns
the new label refere
---truncated--- |
