Search vulnerabilities

Results 426,214

CVE-2026-121771

WordPress Gutenberg Blocks plugin <= 3.7.6 - Sensitive Data Exposure vulnerability

Insertion of Sensitive Information Into Sent Data vulnerability in PublishPress Gutenberg Blocks advanced-gutenberg allows Retrieve Embedded Sensitive Data.This issue affects Gutenberg Blocks: from n/a through 3.7.6.

CVSS 3.1 · 5.3 Medium EPSS < 1% KEV · Not listed
Vendors
—
Products
—
CVE-2026-105880

WordPress WebinarIgnition plugin <= 4.27.125 - Insecure Direct Object References (IDOR) vulnerability

Authorization Bypass Through User-Controlled Key vulnerability in Tobias WebinarIgnition webinar-ignition allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects WebinarIgnition: from n/a through 4.27.125.

CVSS 3.1 · 5.3 Medium EPSS < 1% KEV · Not listed
CVE-2026-99296

libceph: bound mon_command ack decode to front len

In the Linux kernel, the following vulnerability has been resolved: libceph: bound mon_command ack decode to front len handle_command_ack() bounds the decode with msg->front_alloc_len, the size of the reply buffer, instead of msg->front.iov_len, the number of bytes the monitor sent. mon_alloc_msg() routes every CEPH_MSG_MON_COMMAND_ACK to get_generic_reply(), which returns the preallocated ->reply of whichever generic request carries the same tid, so the buffer keeps its fixed size however short the reply is. An ack with hdr.front_len below sizeof(struct ceph_mon_request_header) + sizeof(u32), including 0, still passes ceph_decode_need(), and ceph_decode_32() returns four bytes that were never received: uninitialized slab memory, stale bytes of an earlier message, or bytes the peer planted by sending a reply that lands in the same buffer and is then rejected. The read stays within the allocation, so KASAN does not flag it. req->result reaches userspace through ceph_monc_do_statfs(), ceph_monc_get_version() and ceph_monc_blocklist_add(); rbd hands it back from write() on /sys/bus/rbd/add_single_major, and rbd_get_client() passes it to ERR_PTR() unchecked, which faults: rbd: failed to get latest osdmap: -186318427 BUG: unable to handle page fault for address: fffffbfffe9ca034 Oops: Oops: 0000 [#1] SMP KASAN NOPTI RIP: 0010:do_rbd_add (drivers/block/rbd.c:7105) Call Trace: ... kernfs_fop_write_iter (fs/kernfs/file.c:345) vfs_write (fs/read_write.c:595 fs/read_write.c:687) ksys_write (fs/read_write.c:739) do_syscall_64 (arch/x86/entry/syscall_64.c:61 arch/x86/entry/syscall_64.c:84) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Kernel panic - not syncing: Fatal exception Use msg->front.iov_len, matching handle_subscribe_ack(), handle_statfs_reply(), handle_get_version_reply() and handle_auth_reply(). A well-formed ack has front.iov_len >= 22 and is unaffected; a short one takes the existing bad: path. This applies commit d3c32939fa0e ("libceph: bound get_version reply decode to front len") to the last decode-side use of front_alloc_len in this file.

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99299

media: em28xx: reject audio endpoint with zero packet size

In the Linux kernel, the following vulnerability has been resolved: media: em28xx: reject audio endpoint with zero packet size em28xx_audio_urb_init() divides by the audio endpoint's wMaxPacketSize without checking it, so a USB device that declares a zero-sized audio endpoint divides by zero at probe time. Reject a zero-sized audio endpoint like a missing one; the caller already unwinds on a negative return. Oops: divide error: 0000 [#1] SMP NOPTI Workqueue: usb_hub_wq hub_event RIP: 0010:em28xx_audio_init (drivers/media/usb/em28xx/em28xx-audio.c:718) Call Trace: em28xx_init_extension (drivers/media/usb/em28xx/em28xx-core.c:1248) em28xx_init_dev.isra.0 (drivers/media/usb/em28xx/em28xx-cards.c:3887) em28xx_usb_probe (drivers/media/usb/em28xx/em28xx-cards.c:4258) usb_probe_interface (drivers/usb/core/driver.c:396) ... usb_set_configuration (drivers/usb/core/message.c:2268) usb_generic_driver_probe (drivers/usb/core/generic.c:250) usb_probe_device (drivers/usb/core/driver.c:291) ... usb_new_device (drivers/usb/core/hub.c:2703) hub_event (drivers/usb/core/hub.c:5961) process_one_work (kernel/workqueue.c:3322) worker_thread (kernel/workqueue.c:3486) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Kernel panic - not syncing: Fatal exception

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99301

virtio_net: atomically disable rx mode work

In the Linux kernel, the following vulnerability has been resolved: virtio_net: atomically disable rx mode work virtio-net uses a boolean to gate rx_mode_work during device teardown. The flag is changed under RTNL, but ndo_set_rx_mode checks it under the address-list lock. A callback can therefore pass the check and enqueue work after teardown has flushed it. The work is also enabled before late probe operations that can fail, allowing probe unwind to free the netdev with work still queued. KASAN reports the worker using a virtqueue that probe unwind already freed: BUG: KASAN: slab-use-after-free in virtqueue_add_split Workqueue: events virtnet_rx_mode_work Call Trace: virtqueue_add_split (drivers/virtio/virtio_ring.c:706) virtqueue_add_sgs (drivers/virtio/virtio_ring.c:2839) virtnet_send_command_reply (drivers/net/virtio_net.c:3565) virtnet_rx_mode_work (drivers/net/virtio_net.c:3833) process_one_work (kernel/workqueue.c:3322) worker_thread (kernel/workqueue.c:3405) Freed by task 119: kfree (mm/slub.c:6625) vp_del_vq.isra.0 (drivers/virtio/virtio_pci_common.c:259) vp_del_vqs (drivers/virtio/virtio_pci_common.c:285) virtnet_probe (drivers/net/virtio_net.c:7129) Use the workqueue disable mechanism to atomically reject new queue attempts and drain running work. Keep work disabled until probe succeeds or restore has reattached the netdev, then enable it and replay receive-mode state for a running interface. Disable it before resource teardown in freeze and remove.

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99302

nvmet-rdma: reject short connection requests

In the Linux kernel, the following vulnerability has been resolved: nvmet-rdma: reject short connection requests nvmet_rdma_parse_cm_connect_req() treats RDMA-CM private data as a struct nvme_rdma_cm_req but accepts any nonzero private_data_len. The iWARP path allocates exactly the peer-provided length, so a six-byte MPA request reaches the parser and the hsqsize load reads two bytes past the allocation. Require the complete request structure before reading any of its fields. The decoded KASAN report is: BUG: KASAN: slab-out-of-bounds in nvmet_rdma_cm_handler (drivers/nvme/target/rdma.c:1427 drivers/nvme/target/rdma.c:1475 drivers/nvme/target/rdma.c:1614 drivers/nvme/target/rdma.c:1814) Read of size 2 at addr ff1100010459d366 by task kworker/u16:1/41 Workqueue: iw_cm_wq cm_work_handler Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) print_report (mm/kasan/report.c:378 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:595) nvmet_rdma_cm_handler (drivers/nvme/target/rdma.c:1427 drivers/nvme/target/rdma.c:1475 drivers/nvme/target/rdma.c:1614 drivers/nvme/target/rdma.c:1814) cma_cm_event_handler (drivers/infiniband/core/cma.c:2181) iw_conn_req_handler (drivers/infiniband/core/cma.c:2640) cm_work_handler (drivers/infiniband/core/cm.c:2502 drivers/infiniband/core/cm.c:3858) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) </TASK> Allocated by task 12: __kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415) __kmalloc_node_track_caller_noprof (mm/slub.c:5414 mm/slub.c:5545) kmemdup_noprof (mm/util.c:138) cm_event_handler (drivers/infiniband/core/iwcm.c:194 drivers/infiniband/core/iwcm.c:1076) siw_cm_upcall (drivers/infiniband/sw/siw/siw_cm.c:408) siw_proc_mpareq (drivers/infiniband/sw/siw/siw_cm.c:750) siw_cm_work_handler (drivers/infiniband/sw/siw/siw_cm.c:1086) The buggy address is located 0 bytes to the right of allocated 6-byte region [ff1100010459d360, ff1100010459d366)

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99304

ceph: fix integer overflow in the snap trace bounds check

In the Linux kernel, the following vulnerability has been resolved: ceph: fix integer overflow in the snap trace bounds check ceph_update_snap_trace() bounds the two encoded snapid arrays that follow a struct ceph_mds_snap_realm with sizeof(u64) * (num_snaps + num_prior_parent_snaps). Both counts come straight off the wire as __le32, so the addition is evaluated in unsigned int and wraps before sizeof(u64) promotes it to size_t: an MDS sending num_snaps = 1 and num_prior_parent_snaps = 0xffffffff makes the sum zero and the check degenerates to ceph_decode_need(&p, e, 0, bad), which always passes. dup_array() then reads num_snaps * 8 bytes past the end of the message front, which ceph_msg_new2() allocates at exactly front_len bytes. An unsolicited CEPH_MSG_CLIENT_SNAP reaches this from a malicious or compromised MDS with no client-side action, as do the snaptraces carried in an MDS reply and in a cap import. Compute the length with size_add()/size_mul() so it saturates at SIZE_MAX instead of wrapping, in the style fs/ceph/mdsmap.c already uses for num_export_targets. BUG: KASAN: slab-out-of-bounds in dup_array (include/linux/unaligned.h:28 fs/ceph/snap.c:500) Read of size 8 at addr ffff8880102a16c8 by task kworker/1:2/129 Workqueue: ceph-msgr ceph_con_workfn Call Trace: dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) print_report (mm/kasan/report.c:378 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:595) dup_array (include/linux/unaligned.h:28 fs/ceph/snap.c:500) ceph_update_snap_trace (fs/ceph/snap.c:836) ceph_handle_snap (fs/ceph/snap.c:1155) mds_dispatch (fs/ceph/mds_client.c:7234) ceph_con_process_message (net/ceph/messenger.c:1424) ceph_con_v1_try_read (net/ceph/messenger_v1.c:1430) ceph_con_workfn (net/ceph/messenger.c:1576) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) ... The buggy address is located 0 bytes to the right of allocated 72-byte region [ffff8880102a1680, ffff8880102a16c8)

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99306

ceph: reject mdsmaps that claim more than CEPH_MAX_MDS ranks

In the Linux kernel, the following vulnerability has been resolved: ceph: reject mdsmaps that claim more than CEPH_MAX_MDS ranks check_new_map() sizes its export-target bitmap from CEPH_MAX_MDS but walks it with newmap->possible_max_rank, which comes straight off the wire: ceph_mdsmap_decode() sets it to max(m_num_active_mds, m_max_mds), then overwrites it with the size of the "in" set. Neither is bounded by CEPH_MAX_MDS, only by m_info allocating, so a monitor announcing more ranks than the bitmap holds makes test_bit() read past the end of targets[]. The clear_bit() loop above indexes the same bitmap, though it is additionally bounded by mdsc->max_sessions. The map arrives on the monitor connection, which is unauthenticated in legacy msgr mode. CEPH_MAX_MDS is a protocol constant from src/mds/mdstypes.h, and the reserved inode ranges in super.h are laid out one rank apart over that span, so a map claiming more ranks is corrupt. Reject it where the rank space is established rather than letting the count reach check_new_map(). BUG: KASAN: stack-out-of-bounds in check_new_map (fs/ceph/mds_client.c:5968) Read of size 8 at addr ffffc90000ac7798 by task kworker/1:2/127 Workqueue: ceph-msgr ceph_con_workfn Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) print_report (mm/kasan/report.c:378 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:595) kasan_check_range (mm/kasan/generic.c:186 mm/kasan/generic.c:200) check_new_map (fs/ceph/mds_client.c:5968) ceph_mdsc_handle_mdsmap (fs/ceph/mds_client.c:7060) extra_mon_dispatch (fs/ceph/super.c:802) mon_dispatch (net/ceph/mon_client.c:1483) ceph_con_process_message (net/ceph/messenger.c:1424) ceph_con_v1_try_read (net/ceph/messenger_v1.c:1430) ceph_con_workfn (net/ceph/messenger.c:1576) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) </TASK> The buggy address belongs to stack of task kworker/1:2/127 and is located at offset 288 in frame: check_new_map (fs/ceph/mds_client.c:5846) This frame has 1 object: [32, 288) 'targets'

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99310

nfsd: hold cl_lock in client_has_openowners()

In the Linux kernel, the following vulnerability has been resolved: nfsd: hold cl_lock in client_has_openowners() client_has_openowners() walks clp->cl_openowners and reads so_stateids without clp->cl_lock. nfs4_put_stateowner() unhashes that openowner under cl_lock and then frees it, so a concurrent EXCHANGE_ID with mismatched creds can use-after-free the nfs4_openowner. BUG: KASAN: slab-use-after-free in client_has_state+0x10a/0x140 fs/nfsd/nfs4state.c:3718 client_has_openowners() nfsd4_exchange_id nfsd4_proc_compound nfsd_dispatch svc_process Take clp->cl_lock while client_has_openowners() walks the openowner list.

CVSS n/a EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-126232

Improper Certificate Validation in FortiAnalyzer and FortiManager Allowing RADIUS Server Impersonation

A improper certificate validation vulnerability in Fortinet FortiAnalyzer 8.0.0 through 8.0.1, FortiAnalyzer 7.6.0 through 7.6.7, FortiAnalyzer 7.4.0 through 7.4.11, FortiAnalyzer Cloud 8.0.1, FortiAnalyzer Cloud 7.6.0 through 7.6.7, FortiAnalyzer Cloud 7.4.1 through 7.4.11, FortiManager 8.0.0 through 8.0.1, FortiManager 7.6.0 through 7.6.7, FortiManager 7.4.0 through 7.4.11, FortiManager Cloud 8.0.1, FortiManager Cloud 7.6.0 through 7.6.7, FortiManager Cloud 7.4.1 through 7.4.11 may allow a MITM attacker to impersonate the radius server via a rogue RADIUS server.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-121880

RStudio Server / Posit Workbench localhost port-proxy does not enforce per-session port ownership

Authorization bypass through user-controlled key in the localhost port-proxy (/p/<token>/) in Posit Software, PBC RStudio Server and Posit Workbench before 2026.08.0 allows remote authenticated users to reach web applications and other services bound to 127.0.0.1 under a different user's session, and to view their live rendered content and data, via a proxy URL constructed from the attacker's own port token for an arbitrary port number. The port token is a documented obfuscation measure and not an authorization boundary, and the proxy does not verify that the requested port belongs to the requesting user's session. NOTE: exploitation requires an authenticated account on the same multi-user server and a target service listening on localhost at the time of access. Impact may be greater on hosts that co-locate additional privileged localhost services, and the bypass is not prevented by allow-shell=false; no setting restricts the port-proxy without disabling all application proxying.

CVSS 4.0 · 4.7 Medium EPSS < 1% KEV · Not listed
CVE-2026-129545

Kalmia through 0.2.0 Privilege Escalation via /kal-api/auth/user/edit

Kalmia through 0.2.0 contains a privilege escalation vulnerability that allows low-privileged authenticated users to modify any account via the /kal-api/auth/user/edit endpoint. Attackers holding only read permission can set their admin flag and 'all' permission or reset an administrator's password to fully take over the instance.

CVSS 4.0 · 8.7 High EPSS n/a KEV · Not listed
Vendors
—
Products
—
CVE-2026-129546

Kalmia through 0.2.0 Git Credential Disclosure via Documentation API

Kalmia through 0.2.0 contains an information disclosure vulnerability that allows authenticated read-only users to retrieve Git deployment credentials via documentation API responses. Attackers can query GET /kal-api/docs/documentations or POST /kal-api/docs/documentation to obtain plaintext gitUser and gitPassword values and authenticate to external Git repositories.

CVSS 4.0 · 7.1 High EPSS n/a KEV · Not listed
Vendors
—
Products
—
CVE-2026-129548

Kalmia through 0.2.0 Stored XSS via Unrestricted File Upload

Kalmia through 0.2.0 contains a stored cross-site scripting vulnerability that allows read-only authenticated users to upload HTML or SVG files via the upload-file endpoint without type restrictions. Attackers can share links to files served unauthenticated through the file get route, executing JavaScript in the admin origin to steal administrator JWTs from localStorage.

CVSS 4.0 · 5.1 Medium EPSS n/a KEV · Not listed
Vendors
—
Products
—
CVE-2026-129549

Tensei through 0.11.5 Unauthenticated File Upload via @tensei/media files/upload

Tensei through 0.11.5 contains an unrestricted file upload vulnerability in the @tensei/media plugin that allows unauthenticated attackers to upload dangerous file types via the files/upload route. Attackers can set the multipart Content-Type to upload HTML or SVG files served from the application origin, causing stored cross-site scripting and storage consumption.

CVSS 4.0 · 5.3 Medium EPSS n/a KEV · Not listed
Vendors
—
Products
—
CVE-2026-129551

Tensei through 0.11.5 Unauthenticated Prototype Pollution via sort Parameter

Tensei through 0.11.5 contains a prototype pollution vulnerability in parseSortFromStringToObject of @tensei/rest that allows unauthenticated attackers to set Object.prototype properties via the sort parameter. Attackers can send a sort value like __proto__.<name>:<value> to list, fetch-one, update or delete routes before authorization, altering application logic and causing denial of service.

CVSS 4.0 · 6.9 Medium EPSS n/a KEV · Not listed
Vendors
—
Products
—
CVE-2026-129552

Tensei through 0.11.5 Authentication Bypass via Hard-Coded JWT Secret in @tensei/auth

Tensei through 0.11.5 contains an authentication bypass vulnerability in @tensei/auth that falls back to the hard-coded JWT signing key 'auth-secret-key' when JWT_SECRET is unset. Unauthenticated attackers can sign tokens with arbitrary user ids accepted by populateContextFromToken to impersonate any user, including administrators.

CVSS 4.0 · 9.3 Critical EPSS n/a KEV · Not listed
Vendors
—
Products
—
CVE-2026-129553

Tensei through 0.11.5 Open Redirect via @tensei/social-auth OAuth Callback

Tensei through 0.11.5 contains an open redirect vulnerability in the @tensei/social-auth SocialAuthCallbackController that allows unauthenticated attackers to redirect users by supplying an unvalidated clientCallback query parameter. Attackers can craft links to the /:provider/callback route that send victims to attacker-controlled sites for phishing and leak the issued temporary access token appended after login.

CVSS 4.0 · 5.3 Medium EPSS n/a KEV · Not listed
Vendors
—
Products
—
CVE-2026-121881

Posit Workbench code-server session-state RPC (get_last_seen) SQL injection

SQL injection vulnerability in the get_last_seen code-server session-state RPC in Posit Software, PBC Posit Workbench before 2026.08.0 allows authenticated users to read arbitrary data from the Workbench database via the sessionIds parameter. NOTE: exploitation requires a valid authenticated session; no administrative privileges are needed. The vulnerability is limited to disclosure of database contents.

CVSS 4.0 · 5.7 Medium EPSS < 1% KEV · Not listed