| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In Eclipse ThreadX versions 6.0.1 through 6.5.2.202603, the Module Manager loaders take a module image without its length and trust the sizes and offsets in its preamble. A crafted module image can declare a code size larger than the image to read, or gain access to, the memory that follows it, and can place its entry points outside its code. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.21.3, pypdf can consume excessive time and memory when an application accesses the page count of a crafted encrypted PDF whose page tree declares a forged /Count value. Even after successful decryption, page-count retrieval trusts the unvalidated declared count instead of walking the page tree, allowing the attacker-controlled value to drive excessive work and memory use. This issue is fixed in version 6.21.3. |
| OpenWrt Project is a Linux operating system targeting embedded devices. In versions prior to 24.10.6 and 25.12.1, the mdns daemon has a Stack-based Buffer Overflow vulnerability in the match_ipv6_addresses function, triggered when processing PTR queries for IPv6 reverse DNS domains (.ip6.arpa) received via multicast DNS on UDP port 5353. During processing, the domain name from name_buffer is copied via strcpy into a fixed 256-byte stack buffer, and then the reverse IPv6 request is extracted into a buffer of only 46 bytes (INET6_ADDRSTRLEN). Because the length of the data is never validated before this extraction, an attacker can supply input larger than 46 bytes, causing an out-of-bounds write. This allows a specially crafted DNS query to overflow the stack buffer in match_ipv6_addresses, potentially enabling remote code execution. This issue has been fixed in versions 24.10.6 and 25.12.1. |
| An issue in Systrome Validation & Certification 1.0 allows an attacker to cause a denial of service via the t URL parameter in the qrcode_auth.html component |
| go-git is an extensible git implementation library written in pure Go. Prior to version 5.17.1, go-git’s index decoder for format version 4 fails to validate the path name prefix length before applying it to the previously decoded path name. A maliciously crafted index file can trigger an out-of-bounds slice operation, resulting in a runtime panic during normal index parsing. This issue only affects Git index format version 4. Earlier formats (go-git supports only v2 and v3) are not vulnerable to this issue. This issue has been patched in version 5.17.1. |
| In Modem, there is a possible out of bounds write due to a missing bounds check. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01775984; Issue ID: MSV-8907. |
| If BIND encounters a particular invalid data structure in a DNS record, it will accept the invalid data, and may subsequently abort and exit.
BIND will first need to store a DNS record for a key (KEY, DNSKEY, etc.). That key must specify a PRIVATEDNS algorithm (253), and in the algorithm identifier, improperly give a length longer than the actual identifier data. The invalid identifier will be stored. If BIND later needs to render that record to text, it will use the invalid length during processing, leading to a consistency check failing.
This issue affects BIND 9 versions 9.18.0 through 9.18.50, 9.20.0 through 9.20.24, 9.21.0 through 9.21.23, 9.18.11-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.24-S1. |
| It is possible for an attacker's zone to respond to a query with an RRSIG that has a smaller number of labels than the zone in which the RRSIG is contained. This causes `named` to produce a wildcard name for a zone that is shorter than the attacker's zone, which can result in cache poisoning. For this attack to have any effect, the resolver under attack must have set `synth-from-dnssec yes;` (which is the default).
This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.24, 9.21.0 through 9.21.23, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.24-S1. |
| pypdf is a free and open-source pure-python PDF library. An attacker who uses a vulnerability present in versions prior to 6.10.2 can craft a PDF which leads to long runtimes. This requires loading a PDF with a large trailer `/Size` value in incremental mode. This has been fixed in pypdf 6.10.2. As a workaround, one may apply the changes from the patch manually. |
| pypdf is a free and open-source pure-python PDF library. An attacker who uses a vulnerability present in versions prior to 6.10.1 can craft a PDF which leads to long runtimes. This requires cross-reference streams with wrong large `/Size` values or object streams with wrong large `/N` values. This has been fixed in pypdf 6.10.1. As a workaround, one may apply the changes from the patch manually. |
| Seroval facilitates JavaScript value stringification, including complex structures beyond JSON.stringify capabilities. Prior to 1.6.8, fromJSON and fromCrossJSON do not validate a sequence node's done index. A crafted done index can create an iterator that never finishes when application code consumes it to completion. An unauthenticated request to a service that deserializes untrusted input can therefore block the event loop, exhaust process memory, or make the service unavailable. This issue is fixed in version 1.6.8. |
| zip is a zip library for Rust that supports reading and writing simple ZIP files. From 0.6.0 until 9.0.0, the AES entry reader in src/aes.rs verifies its HMAC only when the attacker-controlled data counter reaches zero. If the underlying bounded reader reaches the real end of the archive while data_remaining is still positive, or if an encrypted entry has no payload, the reader can return a clean end of stream without reading and comparing the authentication tag. Applications using by_index_decrypt, by_name_decrypt, by_path_decrypt, or password-enabled by_index_with_options can therefore accept modified plaintext without an authentication error. This issue is fixed in version 9.0.0. |
| Improper Validation of Specified Quantity in Input vulnerability in the Elixir standard library's JSON module allows an unauthenticated attacker who supplies a JSON document to cause a denial of service through CPU and memory exhaustion.
JSON.decode/1 and JSON.decode!/1 convert each integer literal with erlang:binary_to_integer/1 and do not bound its length. A literal of one million digits decodes successfully but costs 100 to 300 times as much CPU as a string of the same length, so one request body of a few megabytes holds a scheduler for about a second. A literal of more than about 1.29 million digits raises SystemLimitError. Applications generated by phx.new decode request bodies with JSON in Plug.Parsers, before routing and authentication.
This issue affects elixir: from 1.18.0-rc.0 before 1.18.6, from 1.19.0-rc.0 before 1.19.7, and from 1.20.0-rc.0 before 1.20.5. |
| Improper Validation of Specified Quantity in Input vulnerability in the Elixir standard library's URI module allows an attacker who supplies a URL to cause a denial of service through CPU exhaustion.
URI.parse/1 converts the port component with String.to_integer/1 in split_authority/1 (lib/elixir/lib/uri.ex) without bounding its length, so a port of up to 1,262,592 decimal digits produces a bignum of that size and a longer one raises SystemLimitError. Rendering the parsed URI back to text (URI.to_string/1, inspect/1, logging, error formatting) converts the bignum with :erlang.integer_to_binary/1, which is quadratic on Erlang/OTP 27, 28 and 29.0: a 400,000-digit port renders in about 2.6 seconds and a 1 MB port in about 18 seconds. Ports above 65535 are also accepted.
This issue affects elixir: from 0.5.0 before 1.18.6, from 1.19.0-rc.0 before 1.19.7, and from 1.20.0-rc.0 before 1.20.5. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate num_aces and harden ACE walk in smb_inherit_dacl()
smb_inherit_dacl() trusts the on-disk num_aces value from the parent
directory's DACL xattr and uses it to size a heap allocation:
aces_base = kmalloc(sizeof(struct smb_ace) * num_aces * 2, ...);
num_aces is a u16 read from le16_to_cpu(parent_pdacl->num_aces)
without checking that it is consistent with the declared pdacl_size.
An authenticated client whose parent directory's security.NTACL is
tampered (e.g. via offline xattr corruption or a concurrent path that
bypasses parse_dacl()) can present num_aces = 65535 with minimal
actual ACE data. This causes a ~8 MB allocation (not kzalloc, so
uninitialized) that the subsequent loop only partially populates, and
may also overflow the three-way size_t multiply on 32-bit kernels.
Additionally, the ACE walk loop uses the weaker
offsetof(struct smb_ace, access_req) minimum size check rather than
the minimum valid on-wire ACE size, and does not reject ACEs whose
declared size is below the minimum.
Reproduced on UML + KASAN + LOCKDEP against the real ksmbd code path.
A legitimate mount.cifs client creates a parent directory over SMB
(ksmbd writes a valid security.NTACL xattr), then the NTACL blob on
the backing filesystem is rewritten to set num_aces = 0xFFFF while
keeping the posix_acl_hash bytes intact so ksmbd_vfs_get_sd_xattr()'s
hash check still passes. A subsequent SMB2 CREATE of a child under
that parent drives smb2_open() into smb_inherit_dacl() (share has
"vfs objects = acl_xattr" set), which fails the page allocator:
WARNING: mm/page_alloc.c:5226 at __alloc_frozen_pages_noprof+0x46c/0x9c0
Workqueue: ksmbd-io handle_ksmbd_work
__alloc_frozen_pages_noprof+0x46c/0x9c0
___kmalloc_large_node+0x68/0x130
__kmalloc_large_node_noprof+0x24/0x70
__kmalloc_noprof+0x4c9/0x690
smb_inherit_dacl+0x394/0x2430
smb2_open+0x595d/0xabe0
handle_ksmbd_work+0x3d3/0x1140
With the patch applied the added guard rejects the tampered value
with -EINVAL before any large allocation runs, smb2_open() falls back
to smb2_create_sd_buffer(), and the child is created with a default
SD. No warning, no splat.
Fix by:
1. Validating num_aces against pdacl_size using the same formula
applied in parse_dacl().
2. Replacing the raw kmalloc(sizeof * num_aces * 2) with
kmalloc_array(num_aces * 2, sizeof(...)) for overflow-safe
allocation.
3. Tightening the per-ACE loop guard to require the minimum valid
ACE size (offsetof(smb_ace, sid) + CIFS_SID_BASE_SIZE) and
rejecting under-sized ACEs, matching the hardening in
smb_check_perm_dacl() and parse_dacl().
v1 -> v2:
- Replace the synthetic test-module splat in the changelog with a
real-path UML + KASAN reproduction driven through mount.cifs and
SMB2 CREATE; Namjae flagged the kcifs3_test_inherit_dacl_old name
in v1 since it does not exist in ksmbd.
- Drop the commit-hash citation from the code comment per Namjae's
review; keep the parse_dacl() pointer. |
| An Improper Validation of Specified Quantity in Input vulnerability in rpd of Juniper Networks Junos OS and Junos OS Evolved allows an adjacent OSPF peer to disclose rpd memory or cause a rpd crash via a malformed OSPF packets. |
| An Improper Validation of Specified Quantity in Input vulnerability in the routing daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an adjacent attacker to cause a denial of service by sending a specific IS-IS SRv6 packet when SRv6 and Flexible Algorithm are enabled. |
| When writing a long cookie name and value to a Netscape cookie jar, a remote
HTTP server can make `curl` write a record that exceeds its line-length
parsing limit. Consequently, any subsequent `curl` invocation reading from
that same cookie jar using `--cookie` silently aborts parsing prematurely upon
encountering the too long line, ignoring all subsequent valid cookies in the
file. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: core: Add validation for host-provided max_segs
The max_segs field is of type unsigned short, and if a host driver
sets an excessively large value, it may be truncated to zero. This
can cause mmc_alloc_sg() to call kmalloc_objs() with a zero size
allocation request, which leads to undefined behavior.
Under the SLUB allocator, kmalloc(0) returns a special pointer
(ZERO_SIZE_PTR). The subsequent 'if (sg)' check will evaluate to
true, and sg_init_table() will then attempt to access invalid memory,
resulting in a crash:
dwmmc_rockchip 2a310000.mmc: Successfully tuned phase to 133
mmc1: new UHS-I speed SDR104 SDHC card at address aaaa
Unable to handle kernel paging request at virtual address 0000001ffffffff0
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=0000000102c88000
[0000001ffffffff0] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] SMP
Modules linked in:
CPU: 2 UID: 0 PID: 102 Comm: kworker/2:1 Not tainted 7.0.0-rc6-next-20260331-00013-g4d93c25963c5-dirty #80 PREEMPT
Hardware name: Rockchip RK3576 EVB V10 Board (DT)
Workqueue: events_freezable mmc_rescan
pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : sg_init_table+0x2c/0x50
lr : sg_init_table+0x24/0x50
sp : ffff8000837db710
x29: ffff8000837db710 x28: 000000000000c000 x27: 0000000000000300
x26: 0000000000000000 x25: 0000000000000040 x24: ffff0000c46a0000
x23: 0000000000000000 x22: ffff0000c0c73c00 x21: 0000000000000010
x20: 0000000000000010 x19: 0000000000000000 x18: 000000000000002c
x17: 0000000000000000 x16: 0000000000000001 x15: 0000000000000000
x14: 0000000000000400 x13: ffff8000837dc000 x12: 0000000000000000
x11: ffff0000c0c73ca0 x10: 0000000000000040 x9 : 459ec1f0abbdbb00
x8 : 0000001fffffffe0 x7 : 0000000000000000 x6 : 000000000000003f
x5 : 0000000000035579 x4 : 0000000000000901 x3 : 0000000000000000
x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000010
Call trace:
sg_init_table+0x2c/0x50 (P)
mmc_mq_init_request+0x64/0x90
blk_mq_alloc_map_and_rqs+0x3ac/0x480
blk_mq_alloc_set_map_and_rqs+0x98/0x1e0
blk_mq_alloc_tag_set+0x1c0/0x290
mmc_init_queue+0x120/0x370
mmc_blk_alloc_req+0x150/0x420
To prevent this, add a validation check in mmc_mq_init_request() to
detect when sg_len (derived from max_segs) is zero. If sg_len is zero,
we return an error and print an error message, allowing host driver
developers to identify and fix incorrect max_segs configuration.
This is a defensive measure that ensures the MMC core fails gracefully
when host drivers provide invalid max_segs values, rather than crashing
with a page fault. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: limit injected antenna index in ieee80211_parse_tx_radiotap
When parsing the radiotap header of an injected frame,
ieee80211_parse_tx_radiotap() uses the IEEE80211_RADIOTAP_ANTENNA value
directly as a shift count:
info->control.antennas |= BIT(*iterator.this_arg);
*iterator.this_arg is an 8-bit value taken straight from the frame
supplied by userspace, so BIT() can be asked to shift by up to 255. That
is undefined behaviour on the unsigned long and is reported by UBSAN:
UBSAN: shift-out-of-bounds in net/mac80211/tx.c:2174:30
shift exponent 235 is too large for 64-bit type 'unsigned long'
Call Trace:
ieee80211_parse_tx_radiotap+0xadb/0x1950 net/mac80211/tx.c:2174
ieee80211_monitor_start_xmit+0xb1f/0x1250 net/mac80211/tx.c:2451
...
packet_sendmsg+0x3eb6/0x50f0 net/packet/af_packet.c:3109
info->control.antennas is a 2-bit bitmap (u8 antennas:2), so only antenna
indices 0 and 1 can ever be represented. Ignore any larger value instead
of shifting out of bounds. |
