| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| PureVPN client applications on Linux through September 2025 mishandle firewalling. They flush the system's existing iptables rules and apply default ACCEPT policies when connecting to a VPN server. This removes firewall rules that may have been configured manually or by other software (e.g., UFW, container engines, or system security policies). Upon VPN disconnect, the original firewall state is not restored. As a result, the system may become unintentionally exposed to network traffic that was previously blocked. This affects CLI 2.0.1 and GUI 2.10.0. |
| SMSEagle before 6.11 allows reflected XSS via a username or contact phone number. |
| There is a vulnerability in the Supermicro BMC firmware validation logic at Supermicro MBD-X13SEM-F . An attacker can update the system firmware with a specially crafted image. |
| Unsafe handling in bt_conn_tx_processor causes a use-after-free, resulting in a write-before-zero. The written 4 bytes are attacker-controlled, enabling precise memory corruption. |
| The Miniorange OTP Verification with Firebase plugin for WordPress is vulnerable to privilege escalation due to a missing capability check on the 'handle_mofirebase_form_options' function in versions 3.1.0 to 3.6.2. This makes it possible for unauthenticated attackers to update the default role to Administrator. Premium features must be enabled in order to exploit the vulnerability. |
| URL Redirection to Untrusted Site ('Open Redirect') vulnerability in Pusula Communication Information Internet Industry and Trade Ltd. Co. Manageable Email Sending System allows Exploiting Trust in Client.This issue affects Manageable Email Sending System: from <=2025.06 before 2025.08.06. |
| The Kubio AI Page Builder plugin for WordPress is vulnerable to unauthorized plugin installation due to a missing capability check on the kubio-image-hub-install-plugin AJAX action in all versions up to, and including, 2.6.3. This makes it possible for authenticated attackers, with Subscriber-level access and above, to install the Image Hub plugin. |
| Improper Handling of Length Parameter Inconsistency vulnerability in Mitsubishi Electric Corporation MELSEC-Q Series Q03UDVCPU, Q04UDVCPU, Q06UDVCPU, Q13UDVCPU, Q26UDVCPU, Q04UDPVCPU, Q06UDPVCPU, Q13UDPVCPU, and Q26UDPVCPU with the first 5 digits of serial No. "24082" to "27081" allows a remote attacker to cause an integer underflow by sending specially crafted packets to the affected product to stop Ethernet communication and the execution of control programs on the product, when the user authentication function is enabled. The user authentication function is enabled by default only when settings are configured by GX Works2, which complies with the Cybersecurity Law of the People's Republic of China, and is normally disabled. |
| Authorization Bypass Through User-Controlled Key, CWE - 862 - Missing Authorization, – Improper Authorization vulnerability in Bimser Solution Software Trade Inc. EBA Document and Workflow Management System allows – Exploitation of Trusted Identifiers, – Exploitation of Authorization, – Variable Manipulation.This issue affects eBA Document and Workflow Management System: from 6.7.164 before 6.7.166. |
| The Keras Model.load_model method can be exploited to achieve arbitrary code execution, even with safe_mode=True.
One can create a specially crafted .h5/.hdf5 model archive that, when loaded via Model.load_model, will trigger arbitrary code to be executed.
This is achieved by crafting a special .h5 archive file that uses the Lambda layer feature of keras which allows arbitrary Python code in the form of pickled code. The vulnerability comes from the fact that the safe_mode=True option is not honored when reading .h5 archives.
Note that the .h5/.hdf5 format is a legacy format supported by Keras 3 for backwards compatibility. |
| The Keras Model.load_model method can be exploited to achieve arbitrary code execution, even with safe_mode=True.
One can create a specially crafted .keras model archive that, when loaded via Model.load_model, will trigger arbitrary code to be executed. This is achieved by crafting a special config.json (a file within the .keras archive) that will invoke keras.config.enable_unsafe_deserialization() to disable safe mode. Once safe mode is disable, one can use the Lambda layer feature of keras, which allows arbitrary Python code in the form of pickled code. Both can appear in the same archive. Simply the keras.config.enable_unsafe_deserialization() needs to appear first in the archive and the Lambda with arbitrary code needs to be second. |
| Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in Vizly Web Design Real Estate Packages allows Content Spoofing, CAPEC - 593 - Session Hijacking, CAPEC - 591 - Reflected XSS.This issue affects Real Estate Packages: before 5.1. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: Fix error code path in acpi_ds_call_control_method()
A use-after-free in acpi_ps_parse_aml() after a failing invocaion of
acpi_ds_call_control_method() is reported by KASAN [1] and code
inspection reveals that next_walk_state pushed to the thread by
acpi_ds_create_walk_state() is freed on errors, but it is not popped
from the thread beforehand. Thus acpi_ds_get_current_walk_state()
called by acpi_ps_parse_aml() subsequently returns it as the new
walk state which is incorrect.
To address this, make acpi_ds_call_control_method() call
acpi_ds_pop_walk_state() to pop next_walk_state from the thread before
returning an error. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: prevent use-after-free by freeing the cfile later
In smb2_compound_op we have a possible use-after-free
which can cause hard to debug problems later on.
This was revealed during stress testing with KASAN enabled
kernel. Fixing it by moving the cfile free call to
a few lines below, after the usage. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/gicv3: Workaround for NVIDIA erratum T241-FABRIC-4
The T241 platform suffers from the T241-FABRIC-4 erratum which causes
unexpected behavior in the GIC when multiple transactions are received
simultaneously from different sources. This hardware issue impacts
NVIDIA server platforms that use more than two T241 chips
interconnected. Each chip has support for 320 {E}SPIs.
This issue occurs when multiple packets from different GICs are
incorrectly interleaved at the target chip. The erratum text below
specifies exactly what can cause multiple transfer packets susceptible
to interleaving and GIC state corruption. GIC state corruption can
lead to a range of problems, including kernel panics, and unexpected
behavior.
>From the erratum text:
"In some cases, inter-socket AXI4 Stream packets with multiple
transfers, may be interleaved by the fabric when presented to ARM
Generic Interrupt Controller. GIC expects all transfers of a packet
to be delivered without any interleaving.
The following GICv3 commands may result in multiple transfer packets
over inter-socket AXI4 Stream interface:
- Register reads from GICD_I* and GICD_N*
- Register writes to 64-bit GICD registers other than GICD_IROUTERn*
- ITS command MOVALL
Multiple commands in GICv4+ utilize multiple transfer packets,
including VMOVP, VMOVI, VMAPP, and 64-bit register accesses."
This issue impacts system configurations with more than 2 sockets,
that require multi-transfer packets to be sent over inter-socket
AXI4 Stream interface between GIC instances on different sockets.
GICv4 cannot be supported. GICv3 SW model can only be supported
with the workaround. Single and Dual socket configurations are not
impacted by this issue and support GICv3 and GICv4."
Writing to the chip alias region of the GICD_In{E} registers except
GICD_ICENABLERn has an equivalent effect as writing to the global
distributor. The SPI interrupt deactivate path is not impacted by
the erratum.
To fix this problem, implement a workaround that ensures read accesses
to the GICD_In{E} registers are directed to the chip that owns the
SPI, and disable GICv4.x features. To simplify code changes, the
gic_configure_irq() function uses the same alias region for both read
and write operations to GICD_ICFGR. |
| In the Linux kernel, the following vulnerability has been resolved:
drivers: base: component: fix memory leak with using debugfs_lookup()
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once. |
| In the Linux kernel, the following vulnerability has been resolved:
PM: EM: fix memory leak with using debugfs_lookup()
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: mediatek: fix of_iomap memory leak
Smatch reports:
drivers/clk/mediatek/clk-mtk.c:583 mtk_clk_simple_probe() warn:
'base' from of_iomap() not released on lines: 496.
This problem was also found in linux-next. In mtk_clk_simple_probe(),
base is not released when handling errors
if clk_data is not existed, which may cause a leak.
So free_base should be added here to release base. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: dma: fix memory leak running mt76_dma_tx_cleanup
Fix device unregister memory leak and alway cleanup all configured
rx queues in mt76_dma_tx_cleanup routine. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: mediatek: mt8183: fix refcount leak in mt8183_mt6358_ts3a227_max98357_dev_probe()
The node returned by of_parse_phandle() with refcount incremented,
of_node_put() needs be called when finish using it. So add it in the
error path in mt8183_mt6358_ts3a227_max98357_dev_probe(). |
