| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: fix multipath crash caused by flush request when blktrace is enabled
The flush request initialized by blk_kick_flush has NULL bio,
and it may be dealt with nvme_end_req during io completion.
When blktrace is enabled, nvme_trace_bio_complete with multipath
activated trying to access NULL pointer bio from flush request
results in the following crash:
[ 2517.831677] BUG: kernel NULL pointer dereference, address: 000000000000001a
[ 2517.835213] #PF: supervisor read access in kernel mode
[ 2517.838724] #PF: error_code(0x0000) - not-present page
[ 2517.842222] PGD 7b2d51067 P4D 0
[ 2517.845684] Oops: 0000 [#1] SMP NOPTI
[ 2517.849125] CPU: 2 PID: 732 Comm: kworker/2:1H Kdump: loaded Tainted: G S 5.15.67-0.cl9.x86_64 #1
[ 2517.852723] Hardware name: XFUSION 2288H V6/BC13MBSBC, BIOS 1.13 07/27/2022
[ 2517.856358] Workqueue: nvme_tcp_wq nvme_tcp_io_work [nvme_tcp]
[ 2517.859993] RIP: 0010:blk_add_trace_bio_complete+0x6/0x30
[ 2517.863628] Code: 1f 44 00 00 48 8b 46 08 31 c9 ba 04 00 10 00 48 8b 80 50 03 00 00 48 8b 78 50 e9 e5 fe ff ff 0f 1f 44 00 00 41 54 49 89 f4 55 <0f> b6 7a 1a 48 89 d5 e8 3e 1c 2b 00 48 89 ee 4c 89 e7 5d 89 c1 ba
[ 2517.871269] RSP: 0018:ff7f6a008d9dbcd0 EFLAGS: 00010286
[ 2517.875081] RAX: ff3d5b4be00b1d50 RBX: 0000000002040002 RCX: ff3d5b0a270f2000
[ 2517.878966] RDX: 0000000000000000 RSI: ff3d5b0b021fb9f8 RDI: 0000000000000000
[ 2517.882849] RBP: ff3d5b0b96a6fa00 R08: 0000000000000001 R09: 0000000000000000
[ 2517.886718] R10: 000000000000000c R11: 000000000000000c R12: ff3d5b0b021fb9f8
[ 2517.890575] R13: 0000000002000000 R14: ff3d5b0b021fb1b0 R15: 0000000000000018
[ 2517.894434] FS: 0000000000000000(0000) GS:ff3d5b42bfc80000(0000) knlGS:0000000000000000
[ 2517.898299] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2517.902157] CR2: 000000000000001a CR3: 00000004f023e005 CR4: 0000000000771ee0
[ 2517.906053] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 2517.909930] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 2517.913761] PKRU: 55555554
[ 2517.917558] Call Trace:
[ 2517.921294] <TASK>
[ 2517.924982] nvme_complete_rq+0x1c3/0x1e0 [nvme_core]
[ 2517.928715] nvme_tcp_recv_pdu+0x4d7/0x540 [nvme_tcp]
[ 2517.932442] nvme_tcp_recv_skb+0x4f/0x240 [nvme_tcp]
[ 2517.936137] ? nvme_tcp_recv_pdu+0x540/0x540 [nvme_tcp]
[ 2517.939830] tcp_read_sock+0x9c/0x260
[ 2517.943486] nvme_tcp_try_recv+0x65/0xa0 [nvme_tcp]
[ 2517.947173] nvme_tcp_io_work+0x64/0x90 [nvme_tcp]
[ 2517.950834] process_one_work+0x1e8/0x390
[ 2517.954473] worker_thread+0x53/0x3c0
[ 2517.958069] ? process_one_work+0x390/0x390
[ 2517.961655] kthread+0x10c/0x130
[ 2517.965211] ? set_kthread_struct+0x40/0x40
[ 2517.968760] ret_from_fork+0x1f/0x30
[ 2517.972285] </TASK>
To avoid this situation, add a NULL check for req->bio before
calling trace_block_bio_complete. |
| In the Linux kernel, the following vulnerability has been resolved:
media: mediatek: vcodec: Can't set dst buffer to done when lat decode error
Core thread will call v4l2_m2m_buf_done to set dst buffer done for
lat architecture. If lat call v4l2_m2m_buf_done_and_job_finish to
free dst buffer when lat decode error, core thread will access kernel
NULL pointer dereference, then crash. |
| iMonitor EAM 9.6394 installs a system service (eamusbsrv64.exe) that runs with NT AUTHORITY\SYSTEM privileges. This service includes an insecure update mechanism that automatically loads files placed in the C:\sysupdate\ directory during startup. Because any local user can create and write to this directory, an attacker can place malicious DLLs or executables in it. Upon service restart, the files are moved to the application’s installation path and executed with SYSTEM privileges, leading to privilege escalation. |
| The EmbedVideo Extension is a MediaWiki extension which adds a parser function called #ev and various parser tags for embedding video clips from various video sharing services. In versions 4.0.0 and prior, the EmbedVideo extension allows adding arbitrary attributes to an HTML element, allowing for stored XSS through wikitext. This issue has been patched via commit 4e075d3. |
| ADB MCP Server is a MCP (Model Context Protocol) server for interacting with Android devices through ADB. In versions 0.1.0 and prior, the MCP Server is written in a way that is vulnerable to command injection vulnerability attacks as part of some of its MCP Server tool definition and implementation. This issue has been patched via commit 041729c. |
| iMonitor EAM 9.6394 ships with default administrative credentials that are also displayed within the management client’s connection dialog. If the administrator does not change these defaults, a remote attacker can authenticate to the EAM server and gain full control over monitored agents and data. This enables reading highly sensitive telemetry (including keylogger output) and issuing arbitrary actions to all connected clients. |
| iMonitor EAM 9.6394 transmits communication between the EAM client agent and the EAM server, as well as between the EAM monitor management software and the server, in plaintext without authentication or encryption. An attacker with network access can intercept sensitive information (such as credentials, keylogger data, and personally identifiable information) and tamper with traffic. This allows both unauthorized disclosure and modification of data, including issuing arbitrary commands to client agents. |
| Missing Authorization vulnerability in Roxnor EmailKit allows Exploiting Incorrectly Configured Access Control Security Levels. This issue affects EmailKit: from n/a through 1.6.0. |
| Multiple robotic products by Unitree sharing a common firmware, including the Go2, G1, H1, and B2 devices, contain a command injection vulnerability. By setting a malicious string when configuring the on-board WiFi via a BLE module of an affected robot, then triggering a restart of the WiFi service, an attacker can ultimately trigger commands to be run as root via the wpa_supplicant_restart.sh shell script. All Unitree models use firmware derived from the same codebase (MIT Cheetah), and the two major forks are the G1 (humanoid) and Go2 (quadruped) branches. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in themeplugs Authorsy allows Stored XSS. This issue affects Authorsy: from n/a through 1.0.5. |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in LambertGroup LambertGroup - AllInOne - Content Slider allows Blind SQL Injection. This issue affects LambertGroup - AllInOne - Content Slider: from n/a through 3.8. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Syed Balkhi aThemes Addons for Elementor allows Stored XSS. This issue affects aThemes Addons for Elementor: from n/a through 1.1.3. |
| Missing Authorization vulnerability in Acclectic Media Acclectic Media Organizer allows Exploiting Incorrectly Configured Access Control Security Levels. This issue affects Acclectic Media Organizer: from n/a through 1.4. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in awsm.in Embed Any Document allows Stored XSS. This issue affects Embed Any Document: from n/a through 2.7.7. |
| The Popup Maker plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the ‘title’ parameter in all versions up to, and including, 1.20.6 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The Zephyr Project Manager plugin for WordPress is vulnerable to Stored Cross-Site Scripting via admin settings in all versions up to, and including, 3.3.202 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with administrator-level permissions and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This only affects multi-site installations and installations where unfiltered_html has been disabled. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in metaphorcreations Ditty allows Stored XSS. This issue affects Ditty: from n/a through 3.1.58. |
| Insertion of Sensitive Information Into Sent Data vulnerability in Maciej Bis Permalink Manager Lite allows Retrieve Embedded Sensitive Data. This issue affects Permalink Manager Lite: from n/a through 2.5.1.3. |
| The TweetThis Shortcode plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'tweetthis' shortcode in all versions up to, and including, 1.8.0 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The Markdown Shortcode plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'markdown' shortcode in all versions up to, and including, 0.2.1 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
