| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: validate packet source for connected sockets
virtio_transport_recv_pkt() looks up sockets first by the full source and
destination tuple, then by destination only in the bound table. The
fallback is needed for listening and connecting sockets, but sockets remain
in the bound table after connect(), so it can also return a non-listening
socket.
The fallback does not validate the source address. In TCP_SYN_SENT, a
RESPONSE from an unrelated source can transition the victim socket to
TCP_ESTABLISHED while its stored remote address remains unchanged.
Subsequent RW packets from that source are delivered through the same
destination-only fallback.
This was reproduced with capability-empty processes under different UIDs.
The attacker discovered the target tuple through unprivileged AF_VSOCK
sock_diag and caused the victim socket to read 16 attacker-chosen bytes;
the intended peer-side socket read 0 of those 16 bytes.
Add vsock_check_source() to validate the transport, source port and source
CID against the peer stored in a non-listening socket. The local transport
is the CID exception because its packets are generated internally with
VMADDR_CID_LOCAL as their source, including connections using CID aliases.
Use the helper after lock_sock() in the virtio receive path. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: mcast: don't truncate the port group walk on teardown
__br_multicast_disable_port_ctx() and br_multicast_del_port() walk
port->mglist with hlist_for_each_entry_safe(). However,
br_multicast_find_del_pg() can also delete other entries from the same
list through br_multicast_fwd_src_remove() or __fwd_del_star_excl().
If such an entry is the iterator's saved next node, hlist_del_init()
clears its ->next and terminates the walk early. The reproducer triggers
this in both teardown walks, leaving port groups in the bridge mdb with
a dangling ->key.port after del_nbp() frees the port:
BUG: KASAN: slab-use-after-free in __mdb_fill_info+0x1191/0x1320
__mdb_fill_info+0x1191/0x1320
br_mdb_dump+0x594/0xe40
rtnl_mdb_dump+0x1cf/0x5d0
Use hlist_del_init_rcu() to unlink the group while preserving ->next.
br_multicast_del_pg() and the teardown walks run under
br->multicast_lock. The GC worker must acquire the same lock before
detaching the group for destruction, so the node remains alive while
the walk uses the preserved pointer.
Preserving ->next means a walk can now reach a group that an earlier
iteration already deleted as a side effect. That group is off mp->ports,
so br_multicast_find_del_pg() would fall through its port scan and hit
the trailing WARN_ON(1). Skip such groups at the top of that helper: a
port group is put on port->mglist when it is created and only unlinked
when it is deleted, so hlist_unhashed() identifies exactly this case. |
| In the Linux kernel, the following vulnerability has been resolved:
net: psp: do not inherit the Rx association on clone
sk->psp_assoc sits past sk_dontcopy_end, so sock_copy() copies it into
every socket accepted from a listener without taking a reference, while
inet_sock_destruct() puts for every inet socket. psp_twsk_init() does
refcount_inc() for the timewait socket, so a child closing through
TIME_WAIT cancels its own put and leaves the association with one
reference and N timewait sockets holding the same pointer. Closing the
listener frees it, and the timewait timers then put freed memory.
Rejecting the association on a listening socket is not sufficient: a socket
can acquire one while established and then be turned back into a listener,
because tcp_disconnect() leaves sk->psp_assoc in place.
BUG: KASAN: slab-use-after-free in psp_twsk_assoc_free+0x6f/0xf0
Write of size 4 at addr ffff888110f9255c by task swapper/7/0
psp_twsk_assoc_free+0x6f/0xf0
inet_twsk_put+0xda/0x1b0
call_timer_fn+0x53/0x2e0
__run_timers+0x764/0xa80
Freed by task 99:
kfree+0x1a7/0x500
process_one_work+0x7ec/0x1100
An association carries a per-connection SPI and key, so a child must not
inherit the parent's. Clear it on clone. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_flower: validate mask pointer after nla_next()
fl_set_enc_opt() iterates the key's nested tunnel-option attributes
with nla_for_each_attr() while advancing a single mask pointer via
nla_next() at the bottom of each loop, so the mask cursor is driven
by the number of key attributes rather than by the mask's own
attributes. The nla_ok() added by commit c96adff956191 ("cls_flower:
call nla_ok() before nla_next()") only validates the mask pointer
that was just consumed; the pointer produced by nla_next() is used by
the next iteration (fl_set_geneve_opt() and siblings) without any
validation.
The mask's nested attributes are validated with NL_VALIDATE_LIBERAL,
which merely warns on trailing bytes that do not form a complete
attribute. A mask carrying one valid attribute plus 1-3 residue
bytes (or a non-aligned attribute length making msk_depth negative)
therefore reaches the next iteration with msk_depth != 0, so neither
the !msk_depth check in fl_set_enc_opt() nor the !depth check in the
per-type helpers fires. nla_type() then reads past the mask payload
and nla_parse_nested_deprecated() iterates with an nla_len taken
from those bytes, reading well beyond the mask attribute (KASAN:
slab-out-of-bounds read in __nla_validate_parse from fl_change()).
Validate the advanced mask pointer as well: when the mask is not
legitimately exhausted (msk_depth != 0) and the new pointer fails
nla_ok(), reject the filter with -EINVAL. An exactly exhausted mask
still skips the check, preserving exact-match behaviour for the
remaining key attributes. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: fix incorrect MFT record pointer passed to ntfs_attr_record_resize
ntfs_new_attr_flags() passes the wrong MFT record to ntfs_attr_record_resize().
When the attribute is in an extent record, ctx->mrec points to the extent
but the function receives the base record pointer m, causing incorrect
size calculations in memmove.
Fix by passing ctx->mrec (the actual MFT record containing the attribute)
instead of m (the base MFT record) to ntfs_attr_record_resize(). |
| In the Linux kernel, the following vulnerability has been resolved:
x86/CPU/AMD: Fix AMD TLBI Erratum #1718
The processor may fail to invalidate a TLB entry while executing an
INVLPGB/TLBSYNC instruction pair.
Detect the erratum and apply a software workaround when a microcode fix
is not present. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel_pcie: fix TX descriptor bounds check
btintel_pcie_prepare_tx() uses tfd_index to access the TFD and data
buffer arrays before the index is advanced modulo txq->count. An index
equal to txq->count is one past the end of both arrays, so reject it in
the bounds check. |
| A flaw was found in SSSD. A local attacker can exploit this vulnerability by sending a specially crafted request to the autofs responder UNIX socket. Due to improper buffer offset calculation during request parsing, the service performs an out-of-bounds memory read. This flaw can cause the autofs responder process to crash, resulting in a denial of service (DoS). |
| The Redux Framework plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 4.5.15. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for authenticated attackers, with subscriber-level access and above, to view the entire Redux options payload — including plaintext password field values, API keys, license keys, and SMTP credentials — exposed in the inline redux_<opt_name> JavaScript block on wp-admin/profile.php. The Users extension is loaded automatically for every Redux instance registered by any installed theme or plugin, meaning any site running Redux Framework is affected regardless of whether the developer explicitly configured the Users extension. |
| A file overwrite vulnerability exists in Epiphany when installing WebExtension packages from .xpi files.
In src/webextension/ephy-web-extension-manager.c, decompress_xpi_thread() used libarchive with archive_read_support_format_all() (and filters), so the installer did not require a real ZIP. A TAR file named *.xpi was extracted. TAR supports hard-link entry types; with Epiphany's archive_write_disk options (including ARCHIVE_EXTRACT_PERM), a crafted hard-link target can cause an attacker-chosen existing user-writable file to be truncated and overwritten with attacker-controlled content and mode bits, without a dedicated warning dialog, when the user installs or opens the crafted .xpi.
This is related to but separate from the ZIP-slip path traversal fixed as CVE-2026-77679 (#2922 / MR !2143).
Requirements: the victim must install or open a malicious WebExtension (.xpi).
Affected: Epiphany >= 47.0 (WebExtension XPI install path).
Fixed: https://gitlab.gnome.org/GNOME/epiphany/-/merge_requests/2248 (commit 0cc9ab55 — only enable ZIP format support).
Upstream: https://gitlab.gnome.org/GNOME/epiphany/-/work_items/2988
Reporter acknowledgment: Fernando Munoz |
| A logic error in Epiphany's site permission handling can cause camera and microphone access to be granted when the user only approves a different permission.
In src/ephy-window.c, set_permission() stores the user's Allow/Deny choice after a WebKit permission dialog. Types CLIPBOARD and WEBSITE_DATA_ACCESS are not stored by ephy_permission_is_stored_by_permissions_manager(), so control fell into an else-if that was written as:
} else if (EPHY_PERMISSION_TYPE_ACCESS_WEBCAM_AND_MICROPHONE) {
Because that expression is a non-zero enum constant, the branch always ran for those types and wrote EPHY_PERMISSION_PERMIT for both ACCESS_WEBCAM and ACCESS_MICROPHONE for the site origin. The user only saw a Clipboard or Website Data Access dialog.
A malicious site that obtains approval for clipboard or third-party storage access can afterwards use getUserMedia without a further camera/microphone prompt, exposing audiovisual confidentiality.
Requirements: the victim must visit a malicious page and click Allow on a clipboard or website-data-access prompt.
Affected: Epiphany >= 45.0 (bug present at least through 51.x).
Fixed: https://gitlab.gnome.org/GNOME/epiphany/-/merge_requests/2249 (commit 480c3648).
Upstream: https://gitlab.gnome.org/GNOME/epiphany/-/work_items/2976
Reporter acknowledgment: Fernando Munoz |
| A flaw was found in konflux-ci. An attacker with repository write access can achieve arbitrary code execution within the Continuous Integration and Continuous Delivery (CI/CD) workflow environment. By injecting shell commands into environment export scripts, the attacker causes manifest synchronization scripts to dynamically evaluate unvalidated script output. Successful exploitation allows the attacker to compromise CI/CD pipelines, steal sensitive authentication tokens and deployment credentials, and gain unauthorized access to production systems. |
| The Photo Reviews for WooCommerce plugin for WordPress is vulnerable to unauthorized Media Library File Deletion in all versions up to, and including, 1.2.31. This is due to the `delete_reviews_image()` function's `delete_comment` hook trusting attachment IDs supplied via the `wcpr_image_upload_id` POST parameter that were stored in comment meta without any ownership or capability check — `viwcpr_filter_review_image_ids()` verifies only that each submitted ID refers to an attachment post type, not that the submitter uploaded or owns it. This makes it possible for unauthenticated attackers to permanently delete any WordPress media library attachment — including its files on disk as recorded by `wp_delete_attachment()` — by embedding attacker-chosen attachment IDs into a review comment, then waiting for a moderator to remove the review or for WordPress core's `wp_scheduled_delete` cron to purge it after `EMPTY_TRASH_DAYS`. The nonce required to submit the parameter (`wcpr_image_upload`) is a shared public value printed on every product page for guest commenters and does not function as an authentication barrier, making this trivially exploitable without any account. |
| A flaw was found in Kata Containers. In configurations utilizing genpolicy for Confidential Containers guest protection, a malicious host operator can exploit insufficient validation of CreateContainer mount and storage rules. This allows them to mount arbitrary container-rootfs paths over sensitive host locations or provision arbitrary content, potentially exposing confidential information or enabling the acceptance of attacker-controlled input. |
| Missing Authorization vulnerability in Rank Math SEO Rank Math SEO seo-by-rank-math allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Rank Math SEO: from n/a through 1.0.271. |
| The User Frontend – Membership, User Registration, User Profile, User Directory & Content Restriction with Frontend Post Submission plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 4.3.13 via the `post_content` parameter of the `submit_post()` function. The vulnerability exists because the protected-shortcode blocklist guard inspects the `sanitize_textarea_field()` copy of the submitted `post_content`, while the copy actually persisted to the database is processed through `wp_kses()`, whose `wp_kses_no_null()` step strips C0 control bytes — allowing an attacker to inject a single `\x01` byte inside the `[wpuf-registration]` tag name to defeat the `strpos()` blocklist check while the clean, functional shortcode is stored verbatim; `strip_shortcodes()` does not neutralize the stored shortcode either, because the Frontend container that registers it via `add_shortcode()` is only instantiated when `is_admin()` is false, and `admin-ajax` requests have `is_admin() === true`. This makes it possible for authenticated attackers, with Subscriber-level access and above, to inject a `[wpuf-registration role="editor"]` shortcode into a published post, causing a live Editor-role registration form to be rendered publicly on the frontend that any visitor — or the attacker themselves — can submit to mint a WordPress Editor account with an immediately active privileged session when the default `autologin_after_registration` setting is enabled. |
| Aidot products Linkind Matter Smart Plug 1.01.32, OREiN Matter Smart Light Bulb 3.15.21, and Linkind Wi-Fi Smart Light Bulb 3.30.17 are vulnerable to Remote Code Execution (RCE) via UPnP root description parsing. |
| The Product Filter for WooCommerce by WBW plugin for WordPress is vulnerable to Missing Authorization / Information Disclosure in all versions up to, and including, 3.4.6 via the 'filterSettings[default_query]' parameter of the 'filtersFrontend' AJAX action. The handler is registered as 'wp_ajax_nopriv_filtersFrontend' and performs no capability or nonce check; raw POST data is JSON-decoded into $filterSettings and the attacker-controlled 'default_query' array is unconditionally array_merge()'d into the WP_Query arguments, overriding the plugin's safe defaults (most notably post_status, post_type, posts_per_page, and nopaging). This makes it possible for unauthenticated attackers to enumerate non-public WooCommerce products (draft, future, pending) — including their count and rendered listing markup — and to force unbounded queries that load all products in a single request. |
| The Seraphinite Accelerator plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 2.29.24 via the WP_Object_Cache::_getFilePath. This makes it possible for unauthenticated attackers to extract complete WordPress user records — including plaintext user_login, user_email, hashed user_pass, and user_activation_key — from predictable gzip-serialized cache files at wp-content/cache/seraphinite-accelerator/oc/g/users/g/<USER_ID>.dat.gz. This vulnerability is only exploitable when the plugin's Object Cache feature is enabled, and requires the attacker to first trigger caching of the target user record (e.g., via an unauthenticated REST API request) before retrieving the resulting cache file. |
| OPNsense before 26.7.8 contains a command injection vulnerability that allows authenticated users with the System: Firmware privilege to execute commands as root by storing a malicious firmware mirror URL. Attackers can submit shell metacharacters through POST /api/core/firmware/set that opnsense-update evaluates with eval, and can also disable package signature verification through sed injection. |
