| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate inline data i_size during inode read
When reading an inode from disk, ocfs2_validate_inode_block() performs
various sanity checks but does not validate the size of inline data. If
the filesystem is corrupted, an inode's i_size can exceed the actual
inline data capacity (id_count).
This causes ocfs2_dir_foreach_blk_id() to iterate beyond the inline data
buffer, triggering a use-after-free when accessing directory entries from
freed memory.
In the syzbot report:
- i_size was 1099511627576 bytes (~1TB)
- Actual inline data capacity (id_count) is typically <256 bytes
- A garbage rec_len (54648) caused ctx->pos to jump out of bounds
- This triggered a UAF in ocfs2_check_dir_entry()
Fix by adding a validation check in ocfs2_validate_inode_block() to ensure
inodes with inline data have i_size <= id_count. This catches the
corruption early during inode read and prevents all downstream code from
operating on invalid data. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix out-of-bounds write in ocfs2_write_end_inline
KASAN reports a use-after-free write of 4086 bytes in
ocfs2_write_end_inline, called from ocfs2_write_end_nolock during a
copy_file_range splice fallback on a corrupted ocfs2 filesystem mounted on
a loop device. The actual bug is an out-of-bounds write past the inode
block buffer, not a true use-after-free. The write overflows into an
adjacent freed page, which KASAN reports as UAF.
The root cause is that ocfs2_try_to_write_inline_data trusts the on-disk
id_count field to determine whether a write fits in inline data. On a
corrupted filesystem, id_count can exceed the physical maximum inline data
capacity, causing writes to overflow the inode block buffer.
Call trace (crash path):
vfs_copy_file_range (fs/read_write.c:1634)
do_splice_direct
splice_direct_to_actor
iter_file_splice_write
ocfs2_file_write_iter
generic_perform_write
ocfs2_write_end
ocfs2_write_end_nolock (fs/ocfs2/aops.c:1949)
ocfs2_write_end_inline (fs/ocfs2/aops.c:1915)
memcpy_from_folio <-- KASAN: write OOB
So add id_count upper bound check in ocfs2_validate_inode_block() to
alongside the existing i_size check to fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: platform_get_irq_byname() returns an int
platform_get_irq_byname() will return a negative value if an error
happens, so it should be checked and not just passed directly into
devm_request_threaded_irq() hoping all will be ok. |
| In the Linux kernel, the following vulnerability has been resolved:
media: vidtv: fix pass-by-value structs causing MSAN warnings
vidtv_ts_null_write_into() and vidtv_ts_pcr_write_into() take their
argument structs by value, causing MSAN to report uninit-value warnings.
While only vidtv_ts_null_write_into() has triggered a report so far,
both functions share the same issue.
Fix by passing both structs by const pointer instead, avoiding the
stack copy of the struct along with its MSAN shadow and origin metadata.
The functions do not modify the structs, which is enforced by the const
qualifier. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate owner of durable handle on reconnect
Currently, ksmbd does not verify if the user attempting to reconnect
to a durable handle is the same user who originally opened the file.
This allows any authenticated user to hijack an orphaned durable handle
by predicting or brute-forcing the persistent ID.
According to MS-SMB2, the server MUST verify that the SecurityContext
of the reconnect request matches the SecurityContext associated with
the existing open.
Add a durable_owner structure to ksmbd_file to store the original opener's
UID, GID, and account name. and catpure the owner information when a file
handle becomes orphaned. and implementing ksmbd_vfs_compare_durable_owner()
to validate the identity of the requester during SMB2_CREATE (DHnC). |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: validate rec->used in journal-replay file record check
check_file_record() validates rec->total against the record size but
never validates rec->used. The do_action() journal-replay handlers read
rec->used from disk and use it to compute memmove lengths:
DeleteAttribute: memmove(attr, ..., used - asize - roff)
CreateAttribute: memmove(..., attr, used - roff)
change_attr_size: memmove(..., used - PtrOffset(rec, next))
When rec->used is smaller than the offset of a validated attribute, or
larger than the record size, these subtractions can underflow allowing
us to copy huge amounts of memory in to a 4kb buffer, generally
considered a bad idea overall.
This requires a corrupted filesystem, which isn't a threat model the
kernel really needs to worry about, but checking for such an obvious
out-of-bounds value is good to keep things robust, especially on journal
replay
Fix this up by bounding rec->used correctly.
This is much like commit b2bc7c44ed17 ("fs/ntfs3: Fix slab-out-of-bounds
read in DeleteIndexEntryRoot") which checked different values in this
same switch statement. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix use-after-free of sbi in f2fs_compress_write_end_io()
In f2fs_compress_write_end_io(), dec_page_count(sbi, type) can bring
the F2FS_WB_CP_DATA counter to zero, unblocking
f2fs_wait_on_all_pages() in f2fs_put_super() on a concurrent unmount
CPU. The unmount path then proceeds to call
f2fs_destroy_page_array_cache(sbi), which destroys
sbi->page_array_slab via kmem_cache_destroy(), and eventually
kfree(sbi). Meanwhile, the bio completion callback is still executing:
when it reaches page_array_free(sbi, ...), it dereferences
sbi->page_array_slab — a destroyed slab cache — to call
kmem_cache_free(), causing a use-after-free.
This is the same class of bug as CVE-2026-23234 (which fixed the
equivalent race in f2fs_write_end_io() in data.c), but in the
compressed writeback completion path that was not covered by that fix.
Fix this by moving dec_page_count() to after page_array_free(), so
that all sbi accesses complete before the counter decrement that can
unblock unmount. For non-last folios (where atomic_dec_return on
cic->pending_pages is nonzero), dec_page_count is called immediately
before returning — page_array_free is not reached on this path, so
there is no post-decrement sbi access. For the last folio,
page_array_free runs while the F2FS_WB_CP_DATA counter is still
nonzero (this folio has not yet decremented it), keeping sbi alive,
and dec_page_count runs as the final operation. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: caiaq: take a reference on the USB device in create_card()
The caiaq driver stores a pointer to the parent USB device in
cdev->chip.dev but never takes a reference on it. The card's
private_free callback, snd_usb_caiaq_card_free(), can run
asynchronously via snd_card_free_when_closed() after the USB
device has already been disconnected and freed, so any access to
cdev->chip.dev in that path dereferences a freed usb_device.
On top of the refcounting issue, the current card_free implementation
calls usb_reset_device(cdev->chip.dev). A reset in a free callback
is inappropriate: the device is going away, the call takes the
device lock in a teardown context, and the reset races with the
disconnect path that the callback is already cleaning up after.
Take a reference on the USB device in create_card() with
usb_get_dev(), drop it with usb_put_dev() in the free callback,
and remove the usb_reset_device() call. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/kasan: fix double free for kasan pXds
kasan_free_pxd() assumes the page table is always struct page aligned.
But that's not always the case for all architectures. E.g. In case of
powerpc with 64K pagesize, PUD table (of size 4096) comes from slab cache
named pgtable-2^9. Hence instead of page_to_virt(pxd_page()) let's just
directly pass the start of the pxd table which is passed as the 1st
argument.
This fixes the below double free kasan issue seen with PMEM:
radix-mmu: Mapped 0x0000047d10000000-0x0000047f90000000 with 2.00 MiB pages
==================================================================
BUG: KASAN: double-free in kasan_remove_zero_shadow+0x9c4/0xa20
Free of addr c0000003c38e0000 by task ndctl/2164
CPU: 34 UID: 0 PID: 2164 Comm: ndctl Not tainted 6.19.0-rc1-00048-gea1013c15392 #157 VOLUNTARY
Hardware name: IBM,9080-HEX POWER10 (architected) 0x800200 0xf000006 of:IBM,FW1060.00 (NH1060_012) hv:phyp pSeries
Call Trace:
dump_stack_lvl+0x88/0xc4 (unreliable)
print_report+0x214/0x63c
kasan_report_invalid_free+0xe4/0x110
check_slab_allocation+0x100/0x150
kmem_cache_free+0x128/0x6e0
kasan_remove_zero_shadow+0x9c4/0xa20
memunmap_pages+0x2b8/0x5c0
devm_action_release+0x54/0x70
release_nodes+0xc8/0x1a0
devres_release_all+0xe0/0x140
device_unbind_cleanup+0x30/0x120
device_release_driver_internal+0x3e4/0x450
unbind_store+0xfc/0x110
drv_attr_store+0x78/0xb0
sysfs_kf_write+0x114/0x140
kernfs_fop_write_iter+0x264/0x3f0
vfs_write+0x3bc/0x7d0
ksys_write+0xa4/0x190
system_call_exception+0x190/0x480
system_call_vectored_common+0x15c/0x2ec
---- interrupt: 3000 at 0x7fff93b3d3f4
NIP: 00007fff93b3d3f4 LR: 00007fff93b3d3f4 CTR: 0000000000000000
REGS: c0000003f1b07e80 TRAP: 3000 Not tainted (6.19.0-rc1-00048-gea1013c15392)
MSR: 800000000280f033 <SF,VEC,VSX,EE,PR,FP,ME,IR,DR,RI,LE> CR: 48888208 XER: 00000000
<...>
NIP [00007fff93b3d3f4] 0x7fff93b3d3f4
LR [00007fff93b3d3f4] 0x7fff93b3d3f4
---- interrupt: 3000
The buggy address belongs to the object at c0000003c38e0000
which belongs to the cache pgtable-2^9 of size 4096
The buggy address is located 0 bytes inside of
4096-byte region [c0000003c38e0000, c0000003c38e1000)
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x3c38c
head: order:2 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
memcg:c0000003bfd63e01
flags: 0x63ffff800000040(head|node=6|zone=0|lastcpupid=0x7ffff)
page_type: f5(slab)
raw: 063ffff800000040 c000000140058980 5deadbeef0000122 0000000000000000
raw: 0000000000000000 0000000080200020 00000000f5000000 c0000003bfd63e01
head: 063ffff800000040 c000000140058980 5deadbeef0000122 0000000000000000
head: 0000000000000000 0000000080200020 00000000f5000000 c0000003bfd63e01
head: 063ffff800000002 c00c000000f0e301 00000000ffffffff 00000000ffffffff
head: ffffffffffffffff 0000000000000000 00000000ffffffff 0000000000000004
page dumped because: kasan: bad access detected
[ 138.953636] [ T2164] Memory state around the buggy address:
[ 138.953643] [ T2164] c0000003c38dff00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 138.953652] [ T2164] c0000003c38dff80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 138.953661] [ T2164] >c0000003c38e0000: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 138.953669] [ T2164] ^
[ 138.953675] [ T2164] c0000003c38e0080: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 138.953684] [ T2164] c0000003c38e0100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 138.953692] [ T2164] ==================================================================
[ 138.953701] [ T2164] Disabling lock debugging due to kernel taint |
| In the Linux kernel, the following vulnerability has been resolved:
net: sched: act_csum: validate nested VLAN headers
tcf_csum_act() walks nested VLAN headers directly from skb->data when an
skb still carries in-payload VLAN tags. The current code reads
vlan->h_vlan_encapsulated_proto and then pulls VLAN_HLEN bytes without
first ensuring that the full VLAN header is present in the linear area.
If only part of an inner VLAN header is linearized, accessing
h_vlan_encapsulated_proto reads past the linear area, and the following
skb_pull(VLAN_HLEN) may violate skb invariants.
Fix this by requiring pskb_may_pull(skb, VLAN_HLEN) before accessing and
pulling each nested VLAN header. If the header still is not fully
available, drop the packet through the existing error path. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: hold claim backbone gateways by reference
batadv_bla_add_claim() can replace claim->backbone_gw and drop the old
gateway's last reference while readers still follow the pointer.
The netlink claim dump path dereferences claim->backbone_gw->orig and
takes claim->backbone_gw->crc_lock without pinning the underlying
backbone gateway. batadv_bla_check_claim() still has the same naked
pointer access pattern.
Reuse batadv_bla_claim_get_backbone_gw() in both readers so they operate
on a stable gateway reference until the read-side work is complete.
This keeps the dump and claim-check paths aligned with the lifetime
rules introduced for the other BLA claim readers. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/gt: fix refcount underflow in intel_engine_park_heartbeat
A use-after-free / refcount underflow is possible when the heartbeat
worker and intel_engine_park_heartbeat() race to release the same
engine->heartbeat.systole request.
The heartbeat worker reads engine->heartbeat.systole and calls
i915_request_put() on it when the request is complete, but clears
the pointer in a separate, non-atomic step. Concurrently, a request
retirement on another CPU can drop the engine wakeref to zero, triggering
__engine_park() -> intel_engine_park_heartbeat(). If the heartbeat
timer is pending at that point, cancel_delayed_work() returns true and
intel_engine_park_heartbeat() reads the stale non-NULL systole pointer
and calls i915_request_put() on it again, causing a refcount underflow:
```
<4> [487.221889] Workqueue: i915-unordered engine_retire [i915]
<4> [487.222640] RIP: 0010:refcount_warn_saturate+0x68/0xb0
...
<4> [487.222707] Call Trace:
<4> [487.222711] <TASK>
<4> [487.222716] intel_engine_park_heartbeat.part.0+0x6f/0x80 [i915]
<4> [487.223115] intel_engine_park_heartbeat+0x25/0x40 [i915]
<4> [487.223566] __engine_park+0xb9/0x650 [i915]
<4> [487.223973] ____intel_wakeref_put_last+0x2e/0xb0 [i915]
<4> [487.224408] __intel_wakeref_put_last+0x72/0x90 [i915]
<4> [487.224797] intel_context_exit_engine+0x7c/0x80 [i915]
<4> [487.225238] intel_context_exit+0xf1/0x1b0 [i915]
<4> [487.225695] i915_request_retire.part.0+0x1b9/0x530 [i915]
<4> [487.226178] i915_request_retire+0x1c/0x40 [i915]
<4> [487.226625] engine_retire+0x122/0x180 [i915]
<4> [487.227037] process_one_work+0x239/0x760
<4> [487.227060] worker_thread+0x200/0x3f0
<4> [487.227068] ? __pfx_worker_thread+0x10/0x10
<4> [487.227075] kthread+0x10d/0x150
<4> [487.227083] ? __pfx_kthread+0x10/0x10
<4> [487.227092] ret_from_fork+0x3d4/0x480
<4> [487.227099] ? __pfx_kthread+0x10/0x10
<4> [487.227107] ret_from_fork_asm+0x1a/0x30
<4> [487.227141] </TASK>
```
Fix this by replacing the non-atomic pointer read + separate clear with
xchg() in both racing paths. xchg() is a single indivisible hardware
instruction that atomically reads the old pointer and writes NULL. This
guarantees only one of the two concurrent callers obtains the non-NULL
pointer and performs the put, the other gets NULL and skips it.
(cherry picked from commit 13238dc0ee4f9ab8dafa2cca7295736191ae2f42) |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: s3c24xx: check the size of the SMBUS message before using it
The first byte of an i2c SMBUS message is the size, and it should be
verified to ensure that it is in the range of 0..I2C_SMBUS_BLOCK_MAX
before processing it.
This is the same logic that was added in commit a6e04f05ce0b ("i2c:
tegra: check msg length in SMBUS block read") to the i2c tegra driver. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: initialize le_tmp64 in rtw_BIP_verify()
Initialize le_tmp64 to zero in rtw_BIP_verify() to prevent using
uninitialized data.
Smatch warns that only 6 bytes are copied to this 8-byte (u64)
variable, leaving the last two bytes uninitialized:
drivers/staging/rtl8723bs/core/rtw_security.c:1308 rtw_BIP_verify()
warn: not copying enough bytes for '&le_tmp64' (8 vs 6 bytes)
Initializing the variable at the start of the function fixes this
warning and ensures predictable behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()
A malicious USB device claiming to be a CDC Phonet modem can overflow
the skb_shared_info->frags[] array by sending an unbounded sequence of
full-page bulk transfers.
Drop the skb and increment the length error when the frag limit is
reached. This matches the same fix that commit f0813bcd2d9d ("net:
wwan: t7xx: fix potential skb->frags overflow in RX path") did for the
t7xx driver. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: fireworks: bound device-supplied status before string array lookup
The status field in an EFW response is a 32-bit value supplied by the
firewire device. efr_status_names[] has 17 entries so a status value
outside that range goes off into the weeds when looking at the %s value.
Even worse, the status could return EFR_STATUS_INCOMPLETE which is
0x80000000, and is obviously not in that array of potential strings.
Fix this up by properly bounding the index against the array size and
printing "unknown" if it's not recognized. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: tdfxfb: avoid divide-by-zero on FBIOPUT_VSCREENINFO
Much like commit 19f953e74356 ("fbdev: fb_pm2fb: Avoid potential divide
by zero error"), we also need to prevent that same crash from happening
in the udlfb driver as it uses pixclock directly when dividing, which
will crash. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_phonet: fix skb frags[] overflow in pn_rx_complete()
A broken/bored/mean USB host can overflow the skb_shared_info->frags[]
array on a Linux gadget exposing a Phonet function by sending an
unbounded sequence of full-page OUT transfers.
pn_rx_complete() finalizes the skb only when req->actual < req->length,
where req->length is set to PAGE_SIZE by the gadget. If the host always
sends exactly PAGE_SIZE bytes per transfer, fp->rx.skb will never be
reset and each completion will add another fragment via
skb_add_rx_frag(). Once nr_frags exceeds MAX_SKB_FRAGS (default 17),
subsequent frag stores overwrite memory adjacent to the shinfo on the
heap.
Drop the skb and account a length error when the frag limit is reached,
matching the fix applied in t7xx by commit f0813bcd2d9d ("net: wwan:
t7xx: fix potential skb->frags overflow in RX path"). |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: renesas_usb3: validate endpoint index in standard request handlers
The GET_STATUS and SET/CLEAR_FEATURE handlers extract the endpoint
number from the host-supplied wIndex without any sort of validation.
Fix this up by validating the number of endpoints actually match up with
the number the device has before attempting to dereference a pointer
based on this math.
This is just like what was done in commit ee0d382feb44 ("usb: gadget:
aspeed_udc: validate endpoint index for ast udc") for the aspeed driver. |
| In the Linux kernel, the following vulnerability has been resolved:
usbip: validate number_of_packets in usbip_pack_ret_submit()
When a USB/IP client receives a RET_SUBMIT response,
usbip_pack_ret_submit() unconditionally overwrites
urb->number_of_packets from the network PDU. This value is
subsequently used as the loop bound in usbip_recv_iso() and
usbip_pad_iso() to iterate over urb->iso_frame_desc[], a flexible
array whose size was fixed at URB allocation time based on the
*original* number_of_packets from the CMD_SUBMIT.
A malicious USB/IP server can set number_of_packets in the response
to a value larger than what was originally submitted, causing a heap
out-of-bounds write when usbip_recv_iso() writes to
urb->iso_frame_desc[i] beyond the allocated region.
KASAN confirmed this with kernel 7.0.0-rc5:
BUG: KASAN: slab-out-of-bounds in usbip_recv_iso+0x46a/0x640
Write of size 4 at addr ffff888106351d40 by task vhci_rx/69
The buggy address is located 0 bytes to the right of
allocated 320-byte region [ffff888106351c00, ffff888106351d40)
The server side (stub_rx.c) and gadget side (vudc_rx.c) already
validate number_of_packets in the CMD_SUBMIT path since commits
c6688ef9f297 ("usbip: fix stub_rx: harden CMD_SUBMIT path to handle
malicious input") and b78d830f0049 ("usbip: fix vudc_rx: harden
CMD_SUBMIT path to handle malicious input"). The server side validates
against USBIP_MAX_ISO_PACKETS because no URB exists yet at that point.
On the client side we have the original URB, so we can use the tighter
bound: the response must not exceed the original number_of_packets.
This mirrors the existing validation of actual_length against
transfer_buffer_length in usbip_recv_xbuff(), which checks the
response value against the original allocation size.
Kelvin Mbogo's series ("usb: usbip: fix integer overflow in
usbip_recv_iso()", v2) hardens the receive-side functions themselves;
this patch complements that work by catching the bad value at its
source -- in usbip_pack_ret_submit() before the overwrite -- and
using the tighter per-URB allocation bound rather than the global
USBIP_MAX_ISO_PACKETS limit.
Fix this by checking rpdu->number_of_packets against
urb->number_of_packets in usbip_pack_ret_submit() before the
overwrite. On violation, clamp to zero so that usbip_recv_iso() and
usbip_pad_iso() safely return early. |
