| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix NULL pointer dereference in bpf_sk_storage_clone and diag paths
bpf_selem_unlink_nofail() sets SDATA(selem)->smap to NULL before
removing the selem from the storage hlist. A concurrent RCU reader in
bpf_sk_storage_clone() can observe the selem still on the list with
smap already NULL, causing a NULL pointer dereference.
general protection fault, probably for non-canonical address 0xdffffc000000000a:
KASAN: null-ptr-deref in range [0x0000000000000050-0x0000000000000057]
RIP: 0010:bpf_sk_storage_clone+0x1cd/0xaa0 net/core/bpf_sk_storage.c:174
Call Trace:
<IRQ>
sk_clone+0xfed/0x1980 net/core/sock.c:2591
inet_csk_clone_lock+0x30/0x760 net/ipv4/inet_connection_sock.c:1222
tcp_create_openreq_child+0x35/0x2680 net/ipv4/tcp_minisocks.c:571
tcp_v4_syn_recv_sock+0x123/0xf90 net/ipv4/tcp_ipv4.c:1729
tcp_check_req+0x8e1/0x2580 include/net/tcp.h:855
tcp_v4_rcv+0x1845/0x3b80 net/ipv4/tcp_ipv4.c:2347
Add a NULL check for smap in bpf_sk_storage_clone().
bpf_sk_storage_diag_put_all() has the same issue. Add a NULL check
and pass the validated smap directly to diag_get(), which is refactored
to take smap as a parameter instead of reading it internally.
bpf_sk_storage_diag_put() uses diag->maps[i] which is always valid
under its refcount, so diag->maps[i] is passed directly to diag_get(). |
| The Groundhogg — CRM, Newsletters, and Marketing Automation plugin for WordPress is vulnerable to generic SQL Injection via the 'search' parameter in all versions up to, and including, 4.5.5 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with marketer-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. |
| A vulnerability was identified in Yealink SIP-T46U 108.86.0.118. Affected by this vulnerability is the function mod_webd.TFTPUploadIperf of the file /api/inner/tftpuploadiperf of the component Web FastCGI Service. The manipulation of the argument ip/port leads to command injection. The attack needs to be initiated within the local network. The exploit is publicly available and might be used. Upgrading to version 108.87.0.23 addresses this issue. Upgrading the affected component is recommended. The vendor explains: "It has been fixed (...) for our technical support branch. However, please note that this specific support branch firmware is not publicly released yet." |
| A vulnerability was determined in Yealink SIP-T46U 108.86.0.118. Affected is the function mod_webd.BlueToothTest of the file /api/inner/bttest of the component Web FastCGI Service. Executing a manipulation of the argument btMac/pin/reserved can lead to stack-based buffer overflow. The attack needs to be done within the local network. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure and is working on a patch to fix it. |
| A vulnerability was found in Yealink SIP-T46U 108.86.0.118. This impacts the function sprintf of the file /api/upgrade/upgrade of the component Firmware Chunk Upload Handler. Performing a manipulation of the argument uid/start_offset results in stack-based buffer overflow. The attack needs to be approached within the local network. The exploit has been made public and could be used. The vendor was contacted early about this disclosure and is working on a patch to fix it. |
| A vulnerability has been found in Yealink SIP-T46U 108.86.0.118. This affects the function mod_upgrade.SparePartsUpload of the file /api/upgrade/accupgradebychunk of the component Firmware Chunk Upload handler. Such manipulation of the argument uid leads to stack-based buffer overflow. The attack can only be initiated within the local network. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure and is working on a patch to fix it. |
| A flaw has been found in Yealink SIP-T46U 108.86.0.118. The impacted element is the function mod_diagnose.CommandShellByType of the file /api/diagnosis/start of the component Web FastCGI Service. This manipulation of the argument Time causes command injection. The attack can be initiated remotely. The exploit has been published and may be used. Upgrading to version 108.87.0.23 is sufficient to resolve this issue. It is advisable to upgrade the affected component. |
| A vulnerability was detected in Yealink SIP-T46U 108.87.50.1. The affected element is the function StartReportInformation of the file /api/inner/beforewifitest of the component Web FastCGI Service. The manipulation of the argument port results in stack-based buffer overflow. Access to the local network is required for this attack. The exploit is now public and may be used. The vendor was contacted early about this disclosure and is working on a patch to fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: eip93 - fix hmac setkey algo selection
eip93_hmac_setkey() allocates a temporary ahash transform for
computing HMAC ipad/opad key material. The allocation uses the
driver-specific cra_driver_name (e.g. "sha256-eip93") but passes
CRYPTO_ALG_ASYNC as the mask, which excludes async algorithms.
Since the EIP93 hash algorithms are the only ones registered
under those driver names and they are inherently async, the
lookup is self-contradictory and always fails with -ENOENT.
When called from the AEAD setkey path, this failure leaves the
SA record partially initialized with zeroed digest fields. A
subsequent crypto operation then dereferences a NULL pointer in
the request context, resulting in a kernel panic:
```
pc : eip93_aead_handle_result+0xc8c/0x1240 [crypto_hw_eip93]
lr : eip93_aead_handle_result+0xbec/0x1240 [crypto_hw_eip93]
sp : ffffffc082feb820
x29: ffffffc082feb820 x28: ffffff8011043980 x27: 0000000000000000
x26: 0000000000000000 x25: ffffffc078da0bc8 x24: 0000000091043980
x23: ffffff8004d59e50 x22: ffffff8004d59410 x21: ffffff8004d593c0
x20: ffffff8004d593c0 x19: ffffff8004d4f300 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000007fda7aa498
x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: fffffffff8127a80 x9 : 0000000000000000
x8 : ffffff8004d4f380 x7 : 0000000000000000 x6 : 000000000000003f
x5 : 0000000000000040 x4 : 0000000000000008 x3 : 0000000000000009
x2 : 0000000000000008 x1 : 0000000028000003 x0 : ffffff8004d388c0
Code: 910142b6 f94012e0 f9002aa0 f90006d3 (f9400740)
```
The reported symbol eip93_aead_handle_result+0xc8c is a
resolution artifact from static functions being merged under
the nearest exported symbol. Decoding the faulting sequence:
```
910142b6 ADD X22, X21, #0x50
f94012e0 LDR X0, [X23, #0x20]
f9002aa0 STR X0, [X21, #0x50]
f90006d3 STR X19, [X22, #0x8]
f9400740 LDR X0, [X26, #0x8]
```
The faulting LDR at [X26, #0x8] is loading ctx->flags
(offset 8 in eip93_hash_ctx), where ctx has been resolved
to NULL from a partially initialized or unreachable
transform context following the failed setkey.
Fix this by dropping the CRYPTO_ALG_ASYNC mask from the
crypto_alloc_ahash() call. The code already handles async
completion correctly via crypto_wait_req(), so there is no
requirement to restrict the lookup to synchronous algorithms.
Note that hashing a single 64-byte block through the hardware
is likely slower than doing it in software due to the DMA
round-trip overhead, but offloading it may still spare CPU
cycles on the slower embedded cores where this IP is found.
[Detailed investigation report of this bug] |
| Use after free in AdFilter in Google Chrome on Android prior to 149.0.7827.201 allowed a remote attacker who convinced a user to engage in specific UI gestures to execute arbitrary code via a crafted HTML page. (Chromium security severity: High) |
| Integer overflow in Mojo in Google Chrome prior to 149.0.7827.201 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a malicious file. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: terminate the cached volume label after UTF-8 conversion
ntfs_fill_super() loads the on-disk volume label with utf16s_to_utf8s()
and stores the result in sbi->volume.label. The converted label is later
exposed through ntfs3_label_show() using %s, but utf16s_to_utf8s() only
returns the number of bytes written and does not add a trailing NUL.
If the converted label fills the entire fixed buffer,
ntfs3_label_show() can read past the end of sbi->volume.label while
looking for a terminator.
Terminate the cached label explicitly after a successful conversion and
clamp the exact-full case to the last byte of the buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/dpu: fix mismatch between power and frequency
During DPU runtime suspend, calling dev_pm_opp_set_rate(dev, 0) drops
the MMCX rail to MIN_SVS while the core clock frequency remains at its
original (highest) rate. When runtime resume re-enables the clock, this
may result in a mismatch between the rail voltage and the clock rate.
For example, in the DPU bind path, the sequence could be:
cpu0: dev_sync_state -> rpmhpd_sync_state
cpu1: dpu_kms_hw_init
timeline 0 ------------------------------------------------> t
After rpmhpd_sync_state, the voltage performance is no longer guaranteed
to stay at the highest level. During dpu_kms_hw_init, calling
dev_pm_opp_set_rate(dev, 0) drops the voltage, causing the MMCX rail to
fall to MIN_SVS while the core clock is still at its maximum frequency.
When the power is re-enabled, only the clock is enabled, leading to a
situation where the MMCX rail is at MIN_SVS but the core clock is at its
highest rate. In this state, the rail cannot sustain the clock rate,
which may cause instability or system crash.
Remove the call to dev_pm_opp_set_rate(dev, 0) from dpu_runtime_suspend
to ensure the correct vote is restored when DPU resumes.
Patchwork: https://patchwork.freedesktop.org/patch/710077/ |
| RustFS is a distributed object storage system built in Rust. In 1.0.0-beta.7 and earlier, the real-time metrics endpoint at /rustfs/admin/v3/metrics is accessible to any valid IAM user regardless of their assigned policy. Every other admin handler in the codebase calls validate_admin_request to enforce admin-action IAM checks; the MetricsHandler skips this call entirely. A restricted IAM user whose policy grants only access to their own bucket can read server-wide operational metrics including disk I/O statistics, network throughput, scanner cycle timing, and cluster RPC state. |
| RustFS is a distributed object storage system built in Rust. From 1.0.0-alpha.1 until 1.0.0-beta.9, RustFS contains an authorization bypass in the bucket replication admin API. The ListRemoteTargetHandler handler for listing remote replication targets only checks whether request credentials exist, but does not verify that the caller has replication or administrator permissions. As a result, an authenticated user with no effective bucket or admin permissions can list remote replication target configuration for a bucket. Because the returned BucketTarget objects include remote target credentials, this can disclose replication access keys and secret keys. This vulnerability is fixed in 1.0.0-beta.9. |
| Kestra is an open-source, event-driven orchestration platform. Prior to 1.0.45 and 1.3.21, the previewFileFromExecution endpoint (GET /api/v1/{tenant}/executions/{executionId}/file/preview) contains an access control bypass that allows any authenticated user to read output files from any other execution within the same tenant, bypassing execution-level and namespace-level isolation. This vulnerability is fixed in 1.0.45 and 1.3.21. |
| In the Linux kernel, the following vulnerability has been resolved:
net: psp: check for device unregister when creating assoc
psp_assoc_device_get_locked() obtains a psp_dev reference via
psp_dev_get_for_sock() (which uses psp_dev_tryget() under RCU);
it then acquires psd->lock and drops the reference. Before
the lock is taken, psp_dev_unregister() can run to completion:
take psd->lock, clear out state, unlock, drop the registration
reference.
The expectation is that the lock prevents device unregistration,
but much like with netdevs special care has to be taken when
"upgrading" a reference to a locked device. Add the missing
check if device is still alive. psp_dev_is_registered() exists
already but had no callers, which makes me wonder if I either
forgot to add this or lost the check during refactoring... |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/riscv: Remove overflows on the invalidation path
Since RISC-V supports a sign extended page table it should support
a gather->end of ULONG_MAX, but if this happens it will infinite loop
because of the overflow.
Also avoid overflow computing the length by moving the +1 to the other
side of the < |
| Budibase is an open-source low-code platform. Prior to 3.39.3, the application server exposes an unauthenticated endpoint that generates S3 PutObject presigned URLs using credentials stored in a workspace datasource. The route is protected only by the recaptcha middleware and does not require authentication, table permission, datasource permission, or builder access. A public caller who knows a workspace ID and S3 datasource ID can request a signed upload URL for attacker-controlled bucket and key values. This vulnerability is fixed in 3.39.3. |
| Budibase is an open-source low-code platform. Prior to 3.39.9, `POST /api/pwa/process-zip` at packages/server/src/api/routes/static.ts:24 accepts a builder-uploaded .zip, extracts it with extract-zip@2.0.1 into a temp directory, then for each entry listed in icons.json validates the icon path, opens it, and streams the bytes into MinIO. The resulting object is served back via GET /api/assets/{appId}/pwa/{uuid}.png. extract-zip@2.0.1 preserves absolute symlink targets when restoring symlink entries. The icon-source validator at packages/server/src/api/controllers/static/index.ts:259-268 resolves the icon source string against baseDir (path.resolve), checks resolvedSrc.startsWith(baseDir + path.sep) against that string, and calls fs.existsSync(resolvedSrc) which follows symbolic links to confirm the target exists. None of the three calls reject symbolic-link entries. packages/backend-core/src/objectStore/objectStore.ts:302 then calls (await fsp.open(path)).createReadStream() on the resolved path. fsp.open follows the symlink, the target file's bytes stream into MinIO, and the response of the asset-fetch endpoint returns those bytes verbatim. Result: a workspace-level builder reads any file the server process can open. This vulnerability is fixed in 3.39.9. |
