| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: txgbe: leave space for null terminators on property_entry
Lists of struct property_entry are supposed to be terminated with an
empty property, this driver currently seems to be allocating exactly the
amount of entry used.
Change the struct definition to leave an extra element for all
property_entry. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipa: fix GENERIC_CMD register field masks for IPA v5.0+
Fix the field masks to match the hardware layout documented in
downstream GSI (GSI_V3_0_EE_n_GSI_EE_GENERIC_CMD_*).
Notably this fixes a WARN I was seeing when I tried to send "stop"
to the MPSS remoteproc while IPA was up. |
| In the Linux kernel, the following vulnerability has been resolved:
l2tp: Drop large packets with UDP encap
syzbot reported a WARN on my patch series [1]. The actual issue is an
overflow of 16-bit UDP length field, and it exists in the upstream code.
My series added a debug WARN with an overflow check that exposed the
issue, that's why syzbot tripped on my patches, rather than on upstream
code.
syzbot's repro:
r0 = socket$pppl2tp(0x18, 0x1, 0x1)
r1 = socket$inet6_udp(0xa, 0x2, 0x0)
connect$inet6(r1, &(0x7f00000000c0)={0xa, 0x0, 0x0, @loopback, 0xfffffffc}, 0x1c)
connect$pppl2tp(r0, &(0x7f0000000240)=@pppol2tpin6={0x18, 0x1, {0x0, r1, 0x4, 0x0, 0x0, 0x0, {0xa, 0x4e22, 0xffff, @ipv4={'\x00', '\xff\xff', @empty}}}}, 0x32)
writev(r0, &(0x7f0000000080)=[{&(0x7f0000000000)="ee", 0x34000}], 0x1)
It basically sends an oversized (0x34000 bytes) PPPoL2TP packet with UDP
encapsulation, and l2tp_xmit_core doesn't check for overflows when it
assigns the UDP length field. The value gets trimmed to 16 bites.
Add an overflow check that drops oversized packets and avoids sending
packets with trimmed UDP length to the wire.
syzbot's stack trace (with my patch applied):
len >= 65536u
WARNING: ./include/linux/udp.h:38 at udp_set_len_short include/linux/udp.h:38 [inline], CPU#1: syz.0.17/5957
WARNING: ./include/linux/udp.h:38 at l2tp_xmit_core net/l2tp/l2tp_core.c:1293 [inline], CPU#1: syz.0.17/5957
WARNING: ./include/linux/udp.h:38 at l2tp_xmit_skb+0x1204/0x18d0 net/l2tp/l2tp_core.c:1327, CPU#1: syz.0.17/5957
Modules linked in:
CPU: 1 UID: 0 PID: 5957 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
RIP: 0010:udp_set_len_short include/linux/udp.h:38 [inline]
RIP: 0010:l2tp_xmit_core net/l2tp/l2tp_core.c:1293 [inline]
RIP: 0010:l2tp_xmit_skb+0x1204/0x18d0 net/l2tp/l2tp_core.c:1327
Code: 0f 0b 90 e9 21 f9 ff ff e8 e9 05 ec f6 90 0f 0b 90 e9 8d f9 ff ff e8 db 05 ec f6 90 0f 0b 90 e9 cc f9 ff ff e8 cd 05 ec f6 90 <0f> 0b 90 e9 de fa ff ff 44 89 f1 80 e1 07 80 c1 03 38 c1 0f 8c 4f
RSP: 0018:ffffc90003d67878 EFLAGS: 00010293
RAX: ffffffff8ad985e3 RBX: ffff8881a6400090 RCX: ffff8881697f0000
RDX: 0000000000000000 RSI: 0000000000034010 RDI: 000000000000ffff
RBP: dffffc0000000000 R08: 0000000000000003 R09: 0000000000000004
R10: dffffc0000000000 R11: fffff520007acf00 R12: ffff8881baf20900
R13: 0000000000034010 R14: ffff8881a640008e R15: ffff8881760f7000
FS: 000055557e81f500(0000) GS:ffff8882a9467000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000200000033000 CR3: 00000001612f4000 CR4: 00000000000006f0
Call Trace:
<TASK>
pppol2tp_sendmsg+0x40a/0x5f0 net/l2tp/l2tp_ppp.c:302
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg net/socket.c:742 [inline]
sock_write_iter+0x503/0x550 net/socket.c:1195
do_iter_readv_writev+0x619/0x8c0 fs/read_write.c:-1
vfs_writev+0x33c/0x990 fs/read_write.c:1059
do_writev+0x154/0x2e0 fs/read_write.c:1105
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x14d/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f636479c629
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffffd4241c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000014
RAX: ffffffffffffffda RBX: 00007f6364a15fa0 RCX: 00007f636479c629
RDX: 0000000000000001 RSI: 0000200000000080 RDI: 0000000000000003
RBP: 00007f6364832b39 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f6364a15fac R14: 00007f6364a15fa0 R15: 00007f6364a15fa0
</TASK>
[1]: https://lore.kernel.org/all/20260226201600.222044-1-alice.kernel@fastmail.im/ |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel/uncore: Skip discovery table for offline dies
This warning can be triggered if NUMA is disabled and the system
boots with fewer CPUs than the number of CPUs in die 0.
WARNING: CPU: 9 PID: 7257 at uncore.c:1157 uncore_pci_pmu_register+0x136/0x160 [intel_uncore]
Currently, the discovery table continues to be parsed even if all CPUs
in the associated die are offline. This can lead to an array overflow
at "pmu->boxes[die] = box" in uncore_pci_pmu_register(), which may
trigger the warning above or cause other issues. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: af_alg - Fix page reassignment overflow in af_alg_pull_tsgl
When page reassignment was added to af_alg_pull_tsgl the original
loop wasn't updated so it may try to reassign one more page than
necessary.
Add the check to the reassignment so that this does not happen.
Also update the comment which still refers to the obsolete offset
argument. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: algif_aead - Fix minimum RX size check for decryption
The check for the minimum receive buffer size did not take the
tag size into account during decryption. Fix this by adding the
required extra length. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate inline data i_size during inode read
When reading an inode from disk, ocfs2_validate_inode_block() performs
various sanity checks but does not validate the size of inline data. If
the filesystem is corrupted, an inode's i_size can exceed the actual
inline data capacity (id_count).
This causes ocfs2_dir_foreach_blk_id() to iterate beyond the inline data
buffer, triggering a use-after-free when accessing directory entries from
freed memory.
In the syzbot report:
- i_size was 1099511627576 bytes (~1TB)
- Actual inline data capacity (id_count) is typically <256 bytes
- A garbage rec_len (54648) caused ctx->pos to jump out of bounds
- This triggered a UAF in ocfs2_check_dir_entry()
Fix by adding a validation check in ocfs2_validate_inode_block() to ensure
inodes with inline data have i_size <= id_count. This catches the
corruption early during inode read and prevents all downstream code from
operating on invalid data. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix out-of-bounds write in ocfs2_write_end_inline
KASAN reports a use-after-free write of 4086 bytes in
ocfs2_write_end_inline, called from ocfs2_write_end_nolock during a
copy_file_range splice fallback on a corrupted ocfs2 filesystem mounted on
a loop device. The actual bug is an out-of-bounds write past the inode
block buffer, not a true use-after-free. The write overflows into an
adjacent freed page, which KASAN reports as UAF.
The root cause is that ocfs2_try_to_write_inline_data trusts the on-disk
id_count field to determine whether a write fits in inline data. On a
corrupted filesystem, id_count can exceed the physical maximum inline data
capacity, causing writes to overflow the inode block buffer.
Call trace (crash path):
vfs_copy_file_range (fs/read_write.c:1634)
do_splice_direct
splice_direct_to_actor
iter_file_splice_write
ocfs2_file_write_iter
generic_perform_write
ocfs2_write_end
ocfs2_write_end_nolock (fs/ocfs2/aops.c:1949)
ocfs2_write_end_inline (fs/ocfs2/aops.c:1915)
memcpy_from_folio <-- KASAN: write OOB
So add id_count upper bound check in ocfs2_validate_inode_block() to
alongside the existing i_size check to fix it. |
| Totara LMS v19.1.5 and before is vulnerable to Incorrect Access Control. The login page code can be manipulated to reveal the login form. An attacker can chain that with missing rate-limit on the login form to launch a brute force attack. NOTE: this is disputed by the Supplier because (1) local login is enabled/disabled server side (this is not a client side control); (2) there is no evidence SSO login can be bypassed to allow local login; and (3) there is no evidence that local login can be performed when disabled server side. |
| In the Linux kernel, the following vulnerability has been resolved:
eventpoll: defer struct eventpoll free to RCU grace period
In certain situations, ep_free() in eventpoll.c will kfree the epi->ep
eventpoll struct while it still being used by another concurrent thread.
Defer the kfree() to an RCU callback to prevent UAF. |
| An authenticated (non-super) administrator can create a maintenance period with a JavaScript payload that is executed by any user that opens tooltip for that maintenance period in the Host navigator widget. This can allow the attacker to perform unauthorized actions depending on which user opens the tooltip. |
| A remote code execution vulnerability
exists in Notification Settings on GeoVision GV-ASWeb 6.2.0. An authenticated
user with System Setting permissions can execute arbitrary commands on the
server by sending a crafted HTTP POST request to the ASWebCommon.srf backend
endpoint to bypass the frontend restrictions. |
| The Affiliate Program Suite — SliceWP Affiliates plugin for WordPress is vulnerable to Stored Cross-Site Scripting via shortcode attributes in all versions up to, and including, 1.2.7. This is due to insufficient input sanitization and output escaping on user-supplied attributes in the 'slicewp_affiliate_url' shortcode. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| Vulnerability in the Oracle Macoron Tool product of Oracle Open Source Projects. The supported versions that is affected is v0.22.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Macaron Tool. Successful attacks of this vulnerability can result in Oracle Macaron Tool failing host address validation. |
| An issue was discovered in idrac in OpenStack Ironic before 35.0.1. During import, a user invoking molds can request authorization to be sent to a remote endpoint. The credential forwarded is a time-limited Keystone token (which provides access to all OpenStack services Ironic is authorized for); or basic credentials configured for molds storage. The fixed versions are 26.1.6, 29.0.5, 32.0.1, and 35.0.1. |
| An issue was discovered in OpenStack Horizon 25.6 and 25.7 before 25.7.3. There is a write operation to the session storage backend before authentication and thus storage can be exhausted by unauthenticated requests. This is a regression of the CVE-2014-8124 fix. |
| The Mercado Pago payments for WooCommerce plugin for WordPress is vulnerable to unauthorized access of data due to a missing capability check on the 'mp_pix_image' WooCommerce API endpoint in all versions up to, and including, 8.7.11. This makes it possible for unauthenticated attackers to retrieve PIX payment QR code images for arbitrary orders. PIX QR codes contain sensitive merchant information including PIX keys (which may be CPF/CNPJ personal identifiers), transaction amounts, merchant name and city, and MercadoPago transaction references. |
| Memory Corruption when copying data from a freed source while executing performance counter deselect operation. |
| A security flaw has been discovered in Ollama up to 0.20.2. This affects the function digestToPath of the file x/imagegen/transfer/transfer.go of the component Tensor Model Transfer Handler. The manipulation of the argument digest results in path traversal. The attack may be performed from remote. This attack is characterized by high complexity. The exploitability is reported as difficult. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| The Ninja Tables – Easy Data Table Builder plugin for WordPress is vulnerable to unauthorized database table creation due to missing authorization checks on the `createFluentCartTable` function in all versions up to, and including, 5.2.6. This makes it possible for authenticated attackers, with Subscriber-level access and above, to create arbitrary Ninja Tables in the database which can lead to database pollution and resource exhaustion. |
