| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: vhci: Prevent use-after-free by removing debugfs files early
Move the creation of debugfs files into a dedicated function, and ensure
they are explicitly removed during vhci_release(), before associated
data structures are freed.
Previously, debugfs files such as "force_suspend", "force_wakeup", and
others were created under hdev->debugfs but not removed in
vhci_release(). Since vhci_release() frees the backing vhci_data
structure, any access to these files after release would result in
use-after-free errors.
Although hdev->debugfs is later freed in hci_release_dev(), user can
access files after vhci_data is freed but before hdev->debugfs is
released. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: fix use-after-free when rescheduling brcmf_btcoex_info work
The brcmf_btcoex_detach() only shuts down the btcoex timer, if the
flag timer_on is false. However, the brcmf_btcoex_timerfunc(), which
runs as timer handler, sets timer_on to false. This creates critical
race conditions:
1.If brcmf_btcoex_detach() is called while brcmf_btcoex_timerfunc()
is executing, it may observe timer_on as false and skip the call to
timer_shutdown_sync().
2.The brcmf_btcoex_timerfunc() may then reschedule the brcmf_btcoex_info
worker after the cancel_work_sync() has been executed, resulting in
use-after-free bugs.
The use-after-free bugs occur in two distinct scenarios, depending on
the timing of when the brcmf_btcoex_info struct is freed relative to
the execution of its worker thread.
Scenario 1: Freed before the worker is scheduled
The brcmf_btcoex_info is deallocated before the worker is scheduled.
A race condition can occur when schedule_work(&bt_local->work) is
called after the target memory has been freed. The sequence of events
is detailed below:
CPU0 | CPU1
brcmf_btcoex_detach | brcmf_btcoex_timerfunc
| bt_local->timer_on = false;
if (cfg->btcoex->timer_on) |
... |
cancel_work_sync(); |
... |
kfree(cfg->btcoex); // FREE |
| schedule_work(&bt_local->work); // USE
Scenario 2: Freed after the worker is scheduled
The brcmf_btcoex_info is freed after the worker has been scheduled
but before or during its execution. In this case, statements within
the brcmf_btcoex_handler() — such as the container_of macro and
subsequent dereferences of the brcmf_btcoex_info object will cause
a use-after-free access. The following timeline illustrates this
scenario:
CPU0 | CPU1
brcmf_btcoex_detach | brcmf_btcoex_timerfunc
| bt_local->timer_on = false;
if (cfg->btcoex->timer_on) |
... |
cancel_work_sync(); |
... | schedule_work(); // Reschedule
|
kfree(cfg->btcoex); // FREE | brcmf_btcoex_handler() // Worker
/* | btci = container_of(....); // USE
The kfree() above could | ...
also occur at any point | btci-> // USE
during the worker's execution|
*/ |
To resolve the race conditions, drop the conditional check and call
timer_shutdown_sync() directly. It can deactivate the timer reliably,
regardless of its current state. Once stopped, the timer_on state is
then set to false. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: fix use-after-free in cmp_bss()
Following bss_free() quirk introduced in commit 776b3580178f
("cfg80211: track hidden SSID networks properly"), adjust
cfg80211_update_known_bss() to free the last beacon frame
elements only if they're not shared via the corresponding
'hidden_beacon_bss' pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: writeback: fix use-after-free in __mark_inode_dirty()
An use-after-free issue occurred when __mark_inode_dirty() get the
bdi_writeback that was in the progress of switching.
CPU: 1 PID: 562 Comm: systemd-random- Not tainted 6.6.56-gb4403bd46a8e #1
......
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __mark_inode_dirty+0x124/0x418
lr : __mark_inode_dirty+0x118/0x418
sp : ffffffc08c9dbbc0
........
Call trace:
__mark_inode_dirty+0x124/0x418
generic_update_time+0x4c/0x60
file_modified+0xcc/0xd0
ext4_buffered_write_iter+0x58/0x124
ext4_file_write_iter+0x54/0x704
vfs_write+0x1c0/0x308
ksys_write+0x74/0x10c
__arm64_sys_write+0x1c/0x28
invoke_syscall+0x48/0x114
el0_svc_common.constprop.0+0xc0/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x40/0xe4
el0t_64_sync_handler+0x120/0x12c
el0t_64_sync+0x194/0x198
Root cause is:
systemd-random-seed kworker
----------------------------------------------------------------------
___mark_inode_dirty inode_switch_wbs_work_fn
spin_lock(&inode->i_lock);
inode_attach_wb
locked_inode_to_wb_and_lock_list
get inode->i_wb
spin_unlock(&inode->i_lock);
spin_lock(&wb->list_lock)
spin_lock(&inode->i_lock)
inode_io_list_move_locked
spin_unlock(&wb->list_lock)
spin_unlock(&inode->i_lock)
spin_lock(&old_wb->list_lock)
inode_do_switch_wbs
spin_lock(&inode->i_lock)
inode->i_wb = new_wb
spin_unlock(&inode->i_lock)
spin_unlock(&old_wb->list_lock)
wb_put_many(old_wb, nr_switched)
cgwb_release
old wb released
wb_wakeup_delayed() accesses wb,
then trigger the use-after-free
issue
Fix this race condition by holding inode spinlock until
wb_wakeup_delayed() finished. |
| Cross-Site Request Forgery (CSRF) vulnerability in the server (license) registration page in Liferay Portal 7.4.0 through 7.4.3.111, and older unsupported versions, and Liferay DXP 2023.Q4.0 through 2023.Q4.7, 2023.Q3.1 through 2023.Q3.9, 7.4 GA through update 92, and older unsupported versions allows remote attackers to register a server license via the 'orderUuid' parameter. |
| CWP (aka Control Web Panel or CentOS Web Panel) before 0.9.8.1205 allows unauthenticated remote code execution via shell metacharacters in the t_total parameter in a filemanager changePerm request. A valid non-root username must be known. |
| Paracrawl KeOPs v2 is vulnerable to Cross Site Scripting (XSS) in error.php. |
| Tenda AC6 router firmware 15.03.05.19 contains a command injection vulnerability in the formSetIptv function, which processes requests to the /goform/SetIPTVCfg web interface. When handling the list and vlanId parameters, the sub_ADBC0 helper function concatenates these user-supplied values into nvram set system commands using doSystemCmd, without validating or sanitizing special characters (e.g., ;, ", #). An unauthenticated or authenticated attacker can exploit this by submitting a crafted POST request, leading to arbitrary system command execution on the affected device. |
| Tandoor Recipes 2.0.0-alpha-1, fixed in 2.0.0-alpha-2, is vulnerable to privilege escalation. This is due to the rework of the API, which resulted in the User Profile API Endpoint containing two boolean values indicating whether a user is staff or administrative. Consequently, any user can escalate their privileges to the highest level. |
| A vulnerability was identified in huggingface LeRobot up to 0.3.3. Affected by this vulnerability is an unknown functionality of the file lerobot/common/robot_devices/robots/lekiwi_remote.py of the component ZeroMQ Socket Handler. The manipulation leads to missing authentication. The attack can only be initiated within the local network. The vendor was contacted early about this disclosure but did not respond in any way. |
| Starch versions 0.14 and earlier generate session ids insecurely.
The default session id generator returns a SHA-1 hash seeded with a counter, the epoch time, the built-in rand function, the PID, and internal Perl reference addresses. The PID will come from a small set of numbers, and the epoch time may be guessed, if it is not leaked from the HTTP Date header. The built-in rand function is unsuitable for cryptographic usage.
Predicable session ids could allow an attacker to gain access to systems. |
| AliasVault is a privacy-first password manager with built-in email aliasing. A server-side request forgery (SSRF) vulnerability exists in the favicon extraction feature of AliasVault API versions 0.23.0 and lower. The extractor fetches a user-supplied URL, parses the returned HTML, and follows <link rel="icon" href="…">. Although the initial URL is validated to allow only HTTP/HTTPS with default ports, the extractor automatically follows redirects and does not block requests to loopback or internal IP ranges. An authenticated, low-privileged user can exploit this behavior to coerce the backend into making HTTP(S) requests to arbitrary internal hosts and non-default ports. If the target host serves a favicon or any other valid image, the response is returned to the attacker in Base64 form. Even when no data is returned, timing and error behavior can be abused to map internal services. This vulnerability only affects self-hosted AliasVault instances that are reachable from the public internet with public user registration enabled. Private/internal deployments without public sign-ups are not directly exploitable. This issue has been fixed in AliasVault release 0.23.1. |
| The Cloudflare Vite plugin enables a full-featured integration between Vite and the Workers runtime. When utilising the Cloudflare Vite plugin in its default configuration, all files are exposed by the local dev server, including files in the root directory that contain secret information such as .env and .dev.vars. This vulnerability is fixed in 1.6.0. |
| MapServer is a system for developing web-based GIS applications. Prior to 8.4.1, the XML Filter Query directive PropertyName is vulnerably to Boolean-based SQL injection. It seems like expression checking is bypassed by introducing double quote characters in the PropertyName. Allowing to manipulate backend database queries. This vulnerability is fixed in 8.4.1. |
| A deserialization vulnerability exists in h2oai/h2o-3 versions <= 3.46.0.8, allowing attackers to read arbitrary system files and execute arbitrary code. The vulnerability arises from improper handling of JDBC connection parameters, which can be exploited by bypassing regular expression checks and using double URL encoding. This issue impacts all users of the affected versions. |
| The osTicket WP Bridge plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 1.9.2. This is due to missing or incorrect nonce validation on a function. This makes it possible for unauthenticated attackers to update settings and inject malicious web scripts via a forged request granted they can trick a site administrator into performing an action such as clicking on a link. |
| The Browser Sniff plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 2.3. This is due to missing or incorrect nonce validation on a function. This makes it possible for unauthenticated attackers to update settings and inject malicious web scripts via a forged request granted they can trick a site administrator into performing an action such as clicking on a link. |
| The Custom Login And Signup Widget plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 1.0. This is due to missing or incorrect nonce validation in the /frndzk_adminclsw.php file. This makes it possible for unauthenticated attackers to change the email and username settings via a forged request granted they can trick a site administrator into performing an action such as clicking on a link. |
| The Internal Links Manager plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 3.0.1. This is due to missing or incorrect nonce validation on the link deletion functionality in the process_bulk_action() function. This makes it possible for unauthenticated attackers to delete SEO links via a forged request granted they can trick a site administrator into performing an action such as clicking on a link. |
| The SupportCandy – Helpdesk & Customer Support Ticket System plugin for WordPress is vulnerable to Authentication Bypass in all versions up to, and including, 3.3.7. This is due to missing rate limiting on the OTP verification for guest login. This makes it possible for unauthenticated attackers to bypass authentication and gain unauthorized access to customer support tickets by brute forcing the 6-digit OTP code. |
