| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ftrace: Do not over-allocate ftrace memory
The pg_remaining calculation in ftrace_process_locs() assumes that
ENTRIES_PER_PAGE multiplied by 2^order equals the actual capacity of the
allocated page group. However, ENTRIES_PER_PAGE is PAGE_SIZE / ENTRY_SIZE
(integer division). When PAGE_SIZE is not a multiple of ENTRY_SIZE (e.g.
4096 / 24 = 170 with remainder 16), high-order allocations (like 256 pages)
have significantly more capacity than 256 * 170. This leads to pg_remaining
being underestimated, which in turn makes skip (derived from skipped -
pg_remaining) larger than expected, causing the WARN(skip != remaining)
to trigger.
Extra allocated pages for ftrace: 2 with 654 skipped
WARNING: CPU: 0 PID: 0 at kernel/trace/ftrace.c:7295 ftrace_process_locs+0x5bf/0x5e0
A similar problem in ftrace_allocate_records() can result in allocating
too many pages. This can trigger the second warning in
ftrace_process_locs().
Extra allocated pages for ftrace
WARNING: CPU: 0 PID: 0 at kernel/trace/ftrace.c:7276 ftrace_process_locs+0x548/0x580
Use the actual capacity of a page group to determine the number of pages
to allocate. Have ftrace_allocate_pages() return the number of allocated
pages to avoid having to calculate it. Use the actual page group capacity
when validating the number of unused pages due to skipped entries.
Drop the definition of ENTRIES_PER_PAGE since it is no longer used. |
| In the Linux kernel, the following vulnerability has been resolved:
NFS: Fix a deadlock involving nfs_release_folio()
Wang Zhaolong reports a deadlock involving NFSv4.1 state recovery
waiting on kthreadd, which is attempting to reclaim memory by calling
nfs_release_folio(). The latter cannot make progress due to state
recovery being needed.
It seems that the only safe thing to do here is to kick off a writeback
of the folio, without waiting for completion, or else kicking off an
asynchronous commit. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: Coalesce only linear skb
vsock/virtio common tries to coalesce buffers in rx queue: if a linear skb
(with a spare tail room) is followed by a small skb (length limited by
GOOD_COPY_LEN = 128), an attempt is made to join them.
Since the introduction of MSG_ZEROCOPY support, assumption that a small skb
will always be linear is incorrect. In the zerocopy case, data is lost and
the linear skb is appended with uninitialized kernel memory.
Of all 3 supported virtio-based transports, only loopback-transport is
affected. G2H virtio-transport rx queue operates on explicitly linear skbs;
see virtio_vsock_alloc_linear_skb() in virtio_vsock_rx_fill(). H2G
vhost-transport may allocate non-linear skbs, but only for sizes that are
not considered for coalescence; see PAGE_ALLOC_COSTLY_ORDER in
virtio_vsock_alloc_skb().
Ensure only linear skbs are coalesced. Note that skb_tailroom(last_skb) > 0
guarantees last_skb is linear. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Sanitize payload size to prevent member overflow
In qla27xx_copy_fpin_pkt() and qla27xx_copy_multiple_pkt(), the frame_size
reported by firmware is used to calculate the copy length into
item->iocb. However, the iocb member is defined as a fixed-size 64-byte
array within struct purex_item.
If the reported frame_size exceeds 64 bytes, subsequent memcpy calls will
overflow the iocb member boundary. While extra memory might be allocated,
this cross-member write is unsafe and triggers warnings under
CONFIG_FORTIFY_SOURCE.
Fix this by capping total_bytes to the size of the iocb member (64 bytes)
before allocation and copying. This ensures all copies remain within the
bounds of the destination structure member. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: hp-bioscfg: Fix kernel panic in GET_INSTANCE_ID macro
The GET_INSTANCE_ID macro that caused a kernel panic when accessing sysfs
attributes:
1. Off-by-one error: The loop condition used '<=' instead of '<',
causing access beyond array bounds. Since array indices are 0-based
and go from 0 to instances_count-1, the loop should use '<'.
2. Missing NULL check: The code dereferenced attr_name_kobj->name
without checking if attr_name_kobj was NULL, causing a null pointer
dereference in min_length_show() and other attribute show functions.
The panic occurred when fwupd tried to read BIOS configuration attributes:
Oops: general protection fault [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:min_length_show+0xcf/0x1d0 [hp_bioscfg]
Add a NULL check for attr_name_kobj before dereferencing and corrects
the loop boundary to match the pattern used elsewhere in the driver. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix recvmsg() unconditional requeue
If rxrpc_recvmsg() fails because MSG_DONTWAIT was specified but the call at
the front of the recvmsg queue already has its mutex locked, it requeues
the call - whether or not the call is already queued. The call may be on
the queue because MSG_PEEK was also passed and so the call was not dequeued
or because the I/O thread requeued it.
The unconditional requeue may then corrupt the recvmsg queue, leading to
things like UAFs or refcount underruns.
Fix this by only requeuing the call if it isn't already on the queue - and
moving it to the front if it is already queued. If we don't queue it, we
have to put the ref we obtained by dequeuing it.
Also, MSG_PEEK doesn't dequeue the call so shouldn't call
rxrpc_notify_socket() for the call if we didn't use up all the data on the
queue, so fix that also. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/io-pgtable-arm: fix size_t signedness bug in unmap path
__arm_lpae_unmap() returns size_t but was returning -ENOENT (negative
error code) when encountering an unmapped PTE. Since size_t is unsigned,
-ENOENT (typically -2) becomes a huge positive value (0xFFFFFFFFFFFFFFFE
on 64-bit systems).
This corrupted value propagates through the call chain:
__arm_lpae_unmap() returns -ENOENT as size_t
-> arm_lpae_unmap_pages() returns it
-> __iommu_unmap() adds it to iova address
-> iommu_pgsize() triggers BUG_ON due to corrupted iova
This can cause IOVA address overflow in __iommu_unmap() loop and
trigger BUG_ON in iommu_pgsize() from invalid address alignment.
Fix by returning 0 instead of -ENOENT. The WARN_ON already signals
the error condition, and returning 0 (meaning "nothing unmapped")
is the correct semantic for size_t return type. This matches the
behavior of other io-pgtable implementations (io-pgtable-arm-v7s,
io-pgtable-dart) which return 0 on error conditions. |
| In the Linux kernel, the following vulnerability has been resolved:
Octeontx2-af: Add proper checks for fwdata
firmware populates MAC address, link modes (supported, advertised)
and EEPROM data in shared firmware structure which kernel access
via MAC block(CGX/RPM).
Accessing fwdata, on boards booted with out MAC block leading to
kernel panics.
Internal error: Oops: 0000000096000005 [#1] SMP
[ 10.460721] Modules linked in:
[ 10.463779] CPU: 0 UID: 0 PID: 174 Comm: kworker/0:3 Not tainted 6.19.0-rc5-00154-g76ec646abdf7-dirty #3 PREEMPT
[ 10.474045] Hardware name: Marvell OcteonTX CN98XX board (DT)
[ 10.479793] Workqueue: events work_for_cpu_fn
[ 10.484159] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 10.491124] pc : rvu_sdp_init+0x18/0x114
[ 10.495051] lr : rvu_probe+0xe58/0x1d18 |
| In the Linux kernel, the following vulnerability has been resolved:
l2tp: Fix memleak in l2tp_udp_encap_recv().
syzbot reported memleak of struct l2tp_session, l2tp_tunnel,
sock, etc. [0]
The cited commit moved down the validation of the protocol
version in l2tp_udp_encap_recv().
The new place requires an extra error handling to avoid the
memleak.
Let's call l2tp_session_put() there.
[0]:
BUG: memory leak
unreferenced object 0xffff88810a290200 (size 512):
comm "syz.0.17", pid 6086, jiffies 4294944299
hex dump (first 32 bytes):
7d eb 04 0c 00 00 00 00 01 00 00 00 00 00 00 00 }...............
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc babb6a4f):
kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline]
slab_post_alloc_hook mm/slub.c:4958 [inline]
slab_alloc_node mm/slub.c:5263 [inline]
__do_kmalloc_node mm/slub.c:5656 [inline]
__kmalloc_noprof+0x3e0/0x660 mm/slub.c:5669
kmalloc_noprof include/linux/slab.h:961 [inline]
kzalloc_noprof include/linux/slab.h:1094 [inline]
l2tp_session_create+0x3a/0x3b0 net/l2tp/l2tp_core.c:1778
pppol2tp_connect+0x48b/0x920 net/l2tp/l2tp_ppp.c:755
__sys_connect_file+0x7a/0xb0 net/socket.c:2089
__sys_connect+0xde/0x110 net/socket.c:2108
__do_sys_connect net/socket.c:2114 [inline]
__se_sys_connect net/socket.c:2111 [inline]
__x64_sys_connect+0x1c/0x30 net/socket.c:2111
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xa4/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: cdev: Fix resource leaks on errors in lineinfo_changed_notify()
On error handling paths, lineinfo_changed_notify() doesn't free the
allocated resources which results leaks. Fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
net: phy: intel-xway: fix OF node refcount leakage
Automated review spotted am OF node reference count leakage when
checking if the 'leds' child node exists.
Call of_put_node() to correctly maintain the refcount. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: dac: ad3552r-hs: fix out-of-bound write in ad3552r_hs_write_data_source
When simple_write_to_buffer() succeeds, it returns the number of bytes
actually copied to the buffer. The code incorrectly uses 'count'
as the index for null termination instead of the actual bytes copied.
If count exceeds the buffer size, this leads to out-of-bounds write.
Add a check for the count and use the return value as the index.
The bug was validated using a demo module that mirrors the original
code and was tested under QEMU.
Pattern of the bug:
- A fixed 64-byte stack buffer is filled using count.
- If count > 64, the code still does buf[count] = '\0', causing an
- out-of-bounds write on the stack.
Steps for reproduce:
- Opens the device node.
- Writes 128 bytes of A to it.
- This overflows the 64-byte stack buffer and KASAN reports the OOB.
Found via static analysis. This is similar to the
commit da9374819eb3 ("iio: backend: fix out-of-bound write") |
| In the Linux kernel, the following vulnerability has been resolved:
uacce: fix isolate sysfs check condition
uacce supports the device isolation feature. If the driver
implements the isolate_err_threshold_read and
isolate_err_threshold_write callback functions, uacce will create
sysfs files now. Users can read and configure the isolation policy
through sysfs. Currently, sysfs files are created as long as either
isolate_err_threshold_read or isolate_err_threshold_write callback
functions are present.
However, accessing a non-existent callback function may cause the
system to crash. Therefore, intercept the creation of sysfs if
neither read nor write exists; create sysfs if either is supported,
but intercept unsupported operations at the call site. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: fix hugetlb_pmd_shared()
Patch series "mm/hugetlb: fixes for PMD table sharing (incl. using
mmu_gather)", v3.
One functional fix, one performance regression fix, and two related
comment fixes.
I cleaned up my prototype I recently shared [1] for the performance fix,
deferring most of the cleanups I had in the prototype to a later point.
While doing that I identified the other things.
The goal of this patch set is to be backported to stable trees "fairly"
easily. At least patch #1 and #4.
Patch #1 fixes hugetlb_pmd_shared() not detecting any sharing
Patch #2 + #3 are simple comment fixes that patch #4 interacts with.
Patch #4 is a fix for the reported performance regression due to excessive
IPI broadcasts during fork()+exit().
The last patch is all about TLB flushes, IPIs and mmu_gather.
Read: complicated
There are plenty of cleanups in the future to be had + one reasonable
optimization on x86. But that's all out of scope for this series.
Runtime tested, with a focus on fixing the performance regression using
the original reproducer [2] on x86.
This patch (of 4):
We switched from (wrongly) using the page count to an independent shared
count. Now, shared page tables have a refcount of 1 (excluding
speculative references) and instead use ptdesc->pt_share_count to identify
sharing.
We didn't convert hugetlb_pmd_shared(), so right now, we would never
detect a shared PMD table as such, because sharing/unsharing no longer
touches the refcount of a PMD table.
Page migration, like mbind() or migrate_pages() would allow for migrating
folios mapped into such shared PMD tables, even though the folios are not
exclusive. In smaps we would account them as "private" although they are
"shared", and we would be wrongly setting the PM_MMAP_EXCLUSIVE in the
pagemap interface.
Fix it by properly using ptdesc_pmd_is_shared() in hugetlb_pmd_shared(). |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix devlink reload call trace
Commit 4da71a77fc3b ("ice: read internal temperature sensor") introduced
internal temperature sensor reading via HWMON. ice_hwmon_init() was added
to ice_init_feature() and ice_hwmon_exit() was added to ice_remove(). As a
result if devlink reload is used to reinit the device and then the driver
is removed, a call trace can occur.
BUG: unable to handle page fault for address: ffffffffc0fd4b5d
Call Trace:
string+0x48/0xe0
vsnprintf+0x1f9/0x650
sprintf+0x62/0x80
name_show+0x1f/0x30
dev_attr_show+0x19/0x60
The call trace repeats approximately every 10 minutes when system
monitoring tools (e.g., sadc) attempt to read the orphaned hwmon sysfs
attributes that reference freed module memory.
The sequence is:
1. Driver load, ice_hwmon_init() gets called from ice_init_feature()
2. Devlink reload down, flow does not call ice_remove()
3. Devlink reload up, ice_hwmon_init() gets called from
ice_init_feature() resulting in a second instance
4. Driver unload, ice_hwmon_exit() called from ice_remove() leaving the
first hwmon instance orphaned with dangling pointer
Fix this by moving ice_hwmon_exit() from ice_remove() to
ice_deinit_features() to ensure proper cleanup symmetry with
ice_hwmon_init(). |
| In the Linux kernel, the following vulnerability has been resolved:
fs/writeback: skip AS_NO_DATA_INTEGRITY mappings in wait_sb_inodes()
Above the while() loop in wait_sb_inodes(), we document that we must wait
for all pages under writeback for data integrity. Consequently, if a
mapping, like fuse, traditionally does not have data integrity semantics,
there is no need to wait at all; we can simply skip these inodes.
This restores fuse back to prior behavior where syncs are no-ops. This
fixes a user regression where if a system is running a faulty fuse server
that does not reply to issued write requests, this causes wait_sb_inodes()
to wait forever. |
| Apollo Server is an open-source, spec-compliant GraphQL server that's compatible with any GraphQL client, including Apollo Client. In versions from 2.0.0 to 3.13.0, 4.2.0 to before 4.13.0, and 5.0.0 to before 5.4.0, the default configuration of startStandaloneServer from @apollo/server/standalone is vulnerable to denial of service (DoS) attacks through specially crafted request bodies with exotic character set encodings. This issue does not affect users that use @apollo/server as a dependency for integration packages, like @as-integrations/express5 or @as-integrations/next, only direct usage of startStandaloneServer. |
| apko allows users to build and publish OCI container images built from apk packages. From version 0.14.8 to before 1.1.0, expandapk.Split drains the first gzip stream of an APK archive via io.Copy(io.Discard, gzi) without explicit bounds. With an attacker-controlled input stream, this can force large gzip inflation work and lead to resource exhaustion (availability impact). The Split function reads the first tar header, then drains the remainder of the gzip stream by reading from the gzip reader directly without any maximum uncompressed byte limit or inflate-ratio cap. A caller that parses attacker-controlled APK streams may be forced to spend excessive CPU time inflating gzip data, leading to timeouts or process slowdown. This issue has been patched in version 1.1.0. |
| OpenClaw is a personal AI assistant. Prior to version 2026.1.30, the isValidMedia() function in src/media/parse.ts allows arbitrary file paths including absolute paths, home directory paths, and directory traversal sequences. An agent can read any file on the system by outputting MEDIA:/path/to/file, exfiltrating sensitive data to the user/channel. This issue has been patched in version 2026.1.30. |
| Langroid is a framework for building large-language-model-powered applications. Prior to version 0.59.32, there is a bypass to the fix for CVE-2025-46724. TableChatAgent can call pandas_eval tool to evaluate the expression. There is a WAF in langroid/utils/pandas_utils.py introduced to block code injection CVE-2025-46724. However it can be bypassed due to _literal_ok() returning False instead of raising UnsafeCommandError on invalid input, combined with unrestricted access to dangerous dunder attributes (__init__, __globals__, __builtins__). This allows chaining whitelisted DataFrame methods to leak the eval builtin and execute arbitrary code. This issue has been patched in version 0.59.32. |
