Filtered by vendor Redhat
Subscriptions
Total
21359 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-52835 | 1 Redhat | 1 Enterprise Linux | 2024-11-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf/core: Bail out early if the request AUX area is out of bound When perf-record with a large AUX area, e.g 4GB, it fails with: #perf record -C 0 -m ,4G -e arm_spe_0// -- sleep 1 failed to mmap with 12 (Cannot allocate memory) and it reveals a WARNING with __alloc_pages(): ------------[ cut here ]------------ WARNING: CPU: 44 PID: 17573 at mm/page_alloc.c:5568 __alloc_pages+0x1ec/0x248 Call trace: __alloc_pages+0x1ec/0x248 __kmalloc_large_node+0xc0/0x1f8 __kmalloc_node+0x134/0x1e8 rb_alloc_aux+0xe0/0x298 perf_mmap+0x440/0x660 mmap_region+0x308/0x8a8 do_mmap+0x3c0/0x528 vm_mmap_pgoff+0xf4/0x1b8 ksys_mmap_pgoff+0x18c/0x218 __arm64_sys_mmap+0x38/0x58 invoke_syscall+0x50/0x128 el0_svc_common.constprop.0+0x58/0x188 do_el0_svc+0x34/0x50 el0_svc+0x34/0x108 el0t_64_sync_handler+0xb8/0xc0 el0t_64_sync+0x1a4/0x1a8 'rb->aux_pages' allocated by kcalloc() is a pointer array which is used to maintains AUX trace pages. The allocated page for this array is physically contiguous (and virtually contiguous) with an order of 0..MAX_ORDER. If the size of pointer array crosses the limitation set by MAX_ORDER, it reveals a WARNING. So bail out early with -ENOMEM if the request AUX area is out of bound, e.g.: #perf record -C 0 -m ,4G -e arm_spe_0// -- sleep 1 failed to mmap with 12 (Cannot allocate memory) | ||||
| CVE-2023-52834 | 1 Redhat | 1 Enterprise Linux | 2024-11-04 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: atl1c: Work around the DMA RX overflow issue This is based on alx driver commit 881d0327db37 ("net: alx: Work around the DMA RX overflow issue"). The alx and atl1c drivers had RX overflow error which was why a custom allocator was created to avoid certain addresses. The simpler workaround then created for alx driver, but not for atl1c due to lack of tester. Instead of using a custom allocator, check the allocated skb address and use skb_reserve() to move away from problematic 0x...fc0 address. Tested on AR8131 on Acer 4540. | ||||
| CVE-2023-52833 | 1 Redhat | 1 Enterprise Linux | 2024-11-04 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: Add date->evt_skb is NULL check fix crash because of null pointers [ 6104.969662] BUG: kernel NULL pointer dereference, address: 00000000000000c8 [ 6104.969667] #PF: supervisor read access in kernel mode [ 6104.969668] #PF: error_code(0x0000) - not-present page [ 6104.969670] PGD 0 P4D 0 [ 6104.969673] Oops: 0000 [#1] SMP NOPTI [ 6104.969684] RIP: 0010:btusb_mtk_hci_wmt_sync+0x144/0x220 [btusb] [ 6104.969688] RSP: 0018:ffffb8d681533d48 EFLAGS: 00010246 [ 6104.969689] RAX: 0000000000000000 RBX: ffff8ad560bb2000 RCX: 0000000000000006 [ 6104.969691] RDX: 0000000000000000 RSI: ffffb8d681533d08 RDI: 0000000000000000 [ 6104.969692] RBP: ffffb8d681533d70 R08: 0000000000000001 R09: 0000000000000001 [ 6104.969694] R10: 0000000000000001 R11: 00000000fa83b2da R12: ffff8ad461d1d7c0 [ 6104.969695] R13: 0000000000000000 R14: ffff8ad459618c18 R15: ffffb8d681533d90 [ 6104.969697] FS: 00007f5a1cab9d40(0000) GS:ffff8ad578200000(0000) knlGS:00000 [ 6104.969699] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6104.969700] CR2: 00000000000000c8 CR3: 000000018620c001 CR4: 0000000000760ef0 [ 6104.969701] PKRU: 55555554 [ 6104.969702] Call Trace: [ 6104.969708] btusb_mtk_shutdown+0x44/0x80 [btusb] [ 6104.969732] hci_dev_do_close+0x470/0x5c0 [bluetooth] [ 6104.969748] hci_rfkill_set_block+0x56/0xa0 [bluetooth] [ 6104.969753] rfkill_set_block+0x92/0x160 [ 6104.969755] rfkill_fop_write+0x136/0x1e0 [ 6104.969759] __vfs_write+0x18/0x40 [ 6104.969761] vfs_write+0xdf/0x1c0 [ 6104.969763] ksys_write+0xb1/0xe0 [ 6104.969765] __x64_sys_write+0x1a/0x20 [ 6104.969769] do_syscall_64+0x51/0x180 [ 6104.969771] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 6104.969773] RIP: 0033:0x7f5a21f18fef [ 6104.9] RSP: 002b:00007ffeefe39010 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 [ 6104.969780] RAX: ffffffffffffffda RBX: 000055c10a7560a0 RCX: 00007f5a21f18fef [ 6104.969781] RDX: 0000000000000008 RSI: 00007ffeefe39060 RDI: 0000000000000012 [ 6104.969782] RBP: 00007ffeefe39060 R08: 0000000000000000 R09: 0000000000000017 [ 6104.969784] R10: 00007ffeefe38d97 R11: 0000000000000293 R12: 0000000000000002 [ 6104.969785] R13: 00007ffeefe39220 R14: 00007ffeefe391a0 R15: 000055c10a72acf0 | ||||
| CVE-2023-52832 | 1 Redhat | 1 Enterprise Linux | 2024-11-04 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: don't return unset power in ieee80211_get_tx_power() We can get a UBSAN warning if ieee80211_get_tx_power() returns the INT_MIN value mac80211 internally uses for "unset power level". UBSAN: signed-integer-overflow in net/wireless/nl80211.c:3816:5 -2147483648 * 100 cannot be represented in type 'int' CPU: 0 PID: 20433 Comm: insmod Tainted: G WC OE Call Trace: dump_stack+0x74/0x92 ubsan_epilogue+0x9/0x50 handle_overflow+0x8d/0xd0 __ubsan_handle_mul_overflow+0xe/0x10 nl80211_send_iface+0x688/0x6b0 [cfg80211] [...] cfg80211_register_wdev+0x78/0xb0 [cfg80211] cfg80211_netdev_notifier_call+0x200/0x620 [cfg80211] [...] ieee80211_if_add+0x60e/0x8f0 [mac80211] ieee80211_register_hw+0xda5/0x1170 [mac80211] In this case, simply return an error instead, to indicate that no data is available. | ||||
| CVE-2023-52831 | 1 Redhat | 1 Enterprise Linux | 2024-11-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cpu/hotplug: Don't offline the last non-isolated CPU If a system has isolated CPUs via the "isolcpus=" command line parameter, then an attempt to offline the last housekeeping CPU will result in a WARN_ON() when rebuilding the scheduler domains and a subsequent panic due to and unhandled empty CPU mas in partition_sched_domains_locked(). cpuset_hotplug_workfn() rebuild_sched_domains_locked() ndoms = generate_sched_domains(&doms, &attr); cpumask_and(doms[0], top_cpuset.effective_cpus, housekeeping_cpumask(HK_FLAG_DOMAIN)); Thus results in an empty CPU mask which triggers the warning and then the subsequent crash: WARNING: CPU: 4 PID: 80 at kernel/sched/topology.c:2366 build_sched_domains+0x120c/0x1408 Call trace: build_sched_domains+0x120c/0x1408 partition_sched_domains_locked+0x234/0x880 rebuild_sched_domains_locked+0x37c/0x798 rebuild_sched_domains+0x30/0x58 cpuset_hotplug_workfn+0x2a8/0x930 Unable to handle kernel paging request at virtual address fffe80027ab37080 partition_sched_domains_locked+0x318/0x880 rebuild_sched_domains_locked+0x37c/0x798 Aside of the resulting crash, it does not make any sense to offline the last last housekeeping CPU. Prevent this by masking out the non-housekeeping CPUs when selecting a target CPU for initiating the CPU unplug operation via the work queue. | ||||
| CVE-2023-52817 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2024-11-04 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix a null pointer access when the smc_rreg pointer is NULL In certain types of chips, such as VEGA20, reading the amdgpu_regs_smc file could result in an abnormal null pointer access when the smc_rreg pointer is NULL. Below are the steps to reproduce this issue and the corresponding exception log: 1. Navigate to the directory: /sys/kernel/debug/dri/0 2. Execute command: cat amdgpu_regs_smc 3. Exception Log:: [4005007.702554] BUG: kernel NULL pointer dereference, address: 0000000000000000 [4005007.702562] #PF: supervisor instruction fetch in kernel mode [4005007.702567] #PF: error_code(0x0010) - not-present page [4005007.702570] PGD 0 P4D 0 [4005007.702576] Oops: 0010 [#1] SMP NOPTI [4005007.702581] CPU: 4 PID: 62563 Comm: cat Tainted: G OE 5.15.0-43-generic #46-Ubunt u [4005007.702590] RIP: 0010:0x0 [4005007.702598] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [4005007.702600] RSP: 0018:ffffa82b46d27da0 EFLAGS: 00010206 [4005007.702605] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffa82b46d27e68 [4005007.702609] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff9940656e0000 [4005007.702612] RBP: ffffa82b46d27dd8 R08: 0000000000000000 R09: ffff994060c07980 [4005007.702615] R10: 0000000000020000 R11: 0000000000000000 R12: 00007f5e06753000 [4005007.702618] R13: ffff9940656e0000 R14: ffffa82b46d27e68 R15: 00007f5e06753000 [4005007.702622] FS: 00007f5e0755b740(0000) GS:ffff99479d300000(0000) knlGS:0000000000000000 [4005007.702626] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [4005007.702629] CR2: ffffffffffffffd6 CR3: 00000003253fc000 CR4: 00000000003506e0 [4005007.702633] Call Trace: [4005007.702636] <TASK> [4005007.702640] amdgpu_debugfs_regs_smc_read+0xb0/0x120 [amdgpu] [4005007.703002] full_proxy_read+0x5c/0x80 [4005007.703011] vfs_read+0x9f/0x1a0 [4005007.703019] ksys_read+0x67/0xe0 [4005007.703023] __x64_sys_read+0x19/0x20 [4005007.703028] do_syscall_64+0x5c/0xc0 [4005007.703034] ? do_user_addr_fault+0x1e3/0x670 [4005007.703040] ? exit_to_user_mode_prepare+0x37/0xb0 [4005007.703047] ? irqentry_exit_to_user_mode+0x9/0x20 [4005007.703052] ? irqentry_exit+0x19/0x30 [4005007.703057] ? exc_page_fault+0x89/0x160 [4005007.703062] ? asm_exc_page_fault+0x8/0x30 [4005007.703068] entry_SYSCALL_64_after_hwframe+0x44/0xae [4005007.703075] RIP: 0033:0x7f5e07672992 [4005007.703079] Code: c0 e9 b2 fe ff ff 50 48 8d 3d fa b2 0c 00 e8 c5 1d 02 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 e c 28 48 89 54 24 [4005007.703083] RSP: 002b:00007ffe03097898 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [4005007.703088] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f5e07672992 [4005007.703091] RDX: 0000000000020000 RSI: 00007f5e06753000 RDI: 0000000000000003 [4005007.703094] RBP: 00007f5e06753000 R08: 00007f5e06752010 R09: 00007f5e06752010 [4005007.703096] R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000022000 [4005007.703099] R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000 [4005007.703105] </TASK> [4005007.703107] Modules linked in: nf_tables libcrc32c nfnetlink algif_hash af_alg binfmt_misc nls_ iso8859_1 ipmi_ssif ast intel_rapl_msr intel_rapl_common drm_vram_helper drm_ttm_helper amd64_edac t tm edac_mce_amd kvm_amd ccp mac_hid k10temp kvm acpi_ipmi ipmi_si rapl sch_fq_codel ipmi_devintf ipm i_msghandler msr parport_pc ppdev lp parport mtd pstore_blk efi_pstore ramoops pstore_zone reed_solo mon ip_tables x_tables autofs4 ib_uverbs ib_core amdgpu(OE) amddrm_ttm_helper(OE) amdttm(OE) iommu_v 2 amd_sched(OE) amdkcl(OE) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec rc_core drm igb ahci xhci_pci libahci i2c_piix4 i2c_algo_bit xhci_pci_renesas dca [4005007.703184] CR2: 0000000000000000 [4005007.703188] ---[ en ---truncated--- | ||||
| CVE-2023-52814 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2024-11-04 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix potential null pointer derefernce The amdgpu_ras_get_context may return NULL if device not support ras feature, so add check before using. | ||||
| CVE-2023-52813 | 1 Redhat | 1 Enterprise Linux | 2024-11-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: pcrypt - Fix hungtask for PADATA_RESET We found a hungtask bug in test_aead_vec_cfg as follows: INFO: task cryptomgr_test:391009 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Call trace: __switch_to+0x98/0xe0 __schedule+0x6c4/0xf40 schedule+0xd8/0x1b4 schedule_timeout+0x474/0x560 wait_for_common+0x368/0x4e0 wait_for_completion+0x20/0x30 wait_for_completion+0x20/0x30 test_aead_vec_cfg+0xab4/0xd50 test_aead+0x144/0x1f0 alg_test_aead+0xd8/0x1e0 alg_test+0x634/0x890 cryptomgr_test+0x40/0x70 kthread+0x1e0/0x220 ret_from_fork+0x10/0x18 Kernel panic - not syncing: hung_task: blocked tasks For padata_do_parallel, when the return err is 0 or -EBUSY, it will call wait_for_completion(&wait->completion) in test_aead_vec_cfg. In normal case, aead_request_complete() will be called in pcrypt_aead_serial and the return err is 0 for padata_do_parallel. But, when pinst->flags is PADATA_RESET, the return err is -EBUSY for padata_do_parallel, and it won't call aead_request_complete(). Therefore, test_aead_vec_cfg will hung at wait_for_completion(&wait->completion), which will cause hungtask. The problem comes as following: (padata_do_parallel) | rcu_read_lock_bh(); | err = -EINVAL; | (padata_replace) | pinst->flags |= PADATA_RESET; err = -EBUSY | if (pinst->flags & PADATA_RESET) | rcu_read_unlock_bh() | return err In order to resolve the problem, we replace the return err -EBUSY with -EAGAIN, which means parallel_data is changing, and the caller should call it again. v3: remove retry and just change the return err. v2: introduce padata_try_do_parallel() in pcrypt_aead_encrypt and pcrypt_aead_decrypt to solve the hungtask. | ||||
| CVE-2023-52811 | 1 Redhat | 2 Enterprise Linux, Rhel Eus | 2024-11-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ibmvfc: Remove BUG_ON in the case of an empty event pool In practice the driver should never send more commands than are allocated to a queue's event pool. In the unlikely event that this happens, the code asserts a BUG_ON, and in the case that the kernel is not configured to crash on panic returns a junk event pointer from the empty event list causing things to spiral from there. This BUG_ON is a historical artifact of the ibmvfc driver first being upstreamed, and it is well known now that the use of BUG_ON is bad practice except in the most unrecoverable scenario. There is nothing about this scenario that prevents the driver from recovering and carrying on. Remove the BUG_ON in question from ibmvfc_get_event() and return a NULL pointer in the case of an empty event pool. Update all call sites to ibmvfc_get_event() to check for a NULL pointer and perfrom the appropriate failure or recovery action. | ||||
| CVE-2023-52809 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2024-11-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: libfc: Fix potential NULL pointer dereference in fc_lport_ptp_setup() fc_lport_ptp_setup() did not check the return value of fc_rport_create() which can return NULL and would cause a NULL pointer dereference. Address this issue by checking return value of fc_rport_create() and log error message on fc_rport_create() failed. | ||||
| CVE-2023-52803 | 1 Redhat | 1 Enterprise Linux | 2024-11-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Fix RPC client cleaned up the freed pipefs dentries RPC client pipefs dentries cleanup is in separated rpc_remove_pipedir() workqueue,which takes care about pipefs superblock locking. In some special scenarios, when kernel frees the pipefs sb of the current client and immediately alloctes a new pipefs sb, rpc_remove_pipedir function would misjudge the existence of pipefs sb which is not the one it used to hold. As a result, the rpc_remove_pipedir would clean the released freed pipefs dentries. To fix this issue, rpc_remove_pipedir should check whether the current pipefs sb is consistent with the original pipefs sb. This error can be catched by KASAN: ========================================================= [ 250.497700] BUG: KASAN: slab-use-after-free in dget_parent+0x195/0x200 [ 250.498315] Read of size 4 at addr ffff88800a2ab804 by task kworker/0:18/106503 [ 250.500549] Workqueue: events rpc_free_client_work [ 250.501001] Call Trace: [ 250.502880] kasan_report+0xb6/0xf0 [ 250.503209] ? dget_parent+0x195/0x200 [ 250.503561] dget_parent+0x195/0x200 [ 250.503897] ? __pfx_rpc_clntdir_depopulate+0x10/0x10 [ 250.504384] rpc_rmdir_depopulate+0x1b/0x90 [ 250.504781] rpc_remove_client_dir+0xf5/0x150 [ 250.505195] rpc_free_client_work+0xe4/0x230 [ 250.505598] process_one_work+0x8ee/0x13b0 ... [ 22.039056] Allocated by task 244: [ 22.039390] kasan_save_stack+0x22/0x50 [ 22.039758] kasan_set_track+0x25/0x30 [ 22.040109] __kasan_slab_alloc+0x59/0x70 [ 22.040487] kmem_cache_alloc_lru+0xf0/0x240 [ 22.040889] __d_alloc+0x31/0x8e0 [ 22.041207] d_alloc+0x44/0x1f0 [ 22.041514] __rpc_lookup_create_exclusive+0x11c/0x140 [ 22.041987] rpc_mkdir_populate.constprop.0+0x5f/0x110 [ 22.042459] rpc_create_client_dir+0x34/0x150 [ 22.042874] rpc_setup_pipedir_sb+0x102/0x1c0 [ 22.043284] rpc_client_register+0x136/0x4e0 [ 22.043689] rpc_new_client+0x911/0x1020 [ 22.044057] rpc_create_xprt+0xcb/0x370 [ 22.044417] rpc_create+0x36b/0x6c0 ... [ 22.049524] Freed by task 0: [ 22.049803] kasan_save_stack+0x22/0x50 [ 22.050165] kasan_set_track+0x25/0x30 [ 22.050520] kasan_save_free_info+0x2b/0x50 [ 22.050921] __kasan_slab_free+0x10e/0x1a0 [ 22.051306] kmem_cache_free+0xa5/0x390 [ 22.051667] rcu_core+0x62c/0x1930 [ 22.051995] __do_softirq+0x165/0x52a [ 22.052347] [ 22.052503] Last potentially related work creation: [ 22.052952] kasan_save_stack+0x22/0x50 [ 22.053313] __kasan_record_aux_stack+0x8e/0xa0 [ 22.053739] __call_rcu_common.constprop.0+0x6b/0x8b0 [ 22.054209] dentry_free+0xb2/0x140 [ 22.054540] __dentry_kill+0x3be/0x540 [ 22.054900] shrink_dentry_list+0x199/0x510 [ 22.055293] shrink_dcache_parent+0x190/0x240 [ 22.055703] do_one_tree+0x11/0x40 [ 22.056028] shrink_dcache_for_umount+0x61/0x140 [ 22.056461] generic_shutdown_super+0x70/0x590 [ 22.056879] kill_anon_super+0x3a/0x60 [ 22.057234] rpc_kill_sb+0x121/0x200 | ||||
| CVE-2023-52801 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2024-11-04 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: iommufd: Fix missing update of domains_itree after splitting iopt_area In iopt_area_split(), if the original iopt_area has filled a domain and is linked to domains_itree, pages_nodes have to be properly reinserted. Otherwise the domains_itree becomes corrupted and we will UAF. | ||||
| CVE-2023-52796 | 1 Redhat | 1 Enterprise Linux | 2024-11-04 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipvlan: add ipvlan_route_v6_outbound() helper Inspired by syzbot reports using a stack of multiple ipvlan devices. Reduce stack size needed in ipvlan_process_v6_outbound() by moving the flowi6 struct used for the route lookup in an non inlined helper. ipvlan_route_v6_outbound() needs 120 bytes on the stack, immediately reclaimed. Also make sure ipvlan_process_v4_outbound() is not inlined. We might also have to lower MAX_NEST_DEV, because only syzbot uses setups with more than four stacked devices. BUG: TASK stack guard page was hit at ffffc9000e803ff8 (stack is ffffc9000e804000..ffffc9000e808000) stack guard page: 0000 [#1] SMP KASAN CPU: 0 PID: 13442 Comm: syz-executor.4 Not tainted 6.1.52-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023 RIP: 0010:kasan_check_range+0x4/0x2a0 mm/kasan/generic.c:188 Code: 48 01 c6 48 89 c7 e8 db 4e c1 03 31 c0 5d c3 cc 0f 0b eb 02 0f 0b b8 ea ff ff ff 5d c3 cc 00 00 cc cc 00 00 cc cc 55 48 89 e5 <41> 57 41 56 41 55 41 54 53 b0 01 48 85 f6 0f 84 a4 01 00 00 48 89 RSP: 0018:ffffc9000e804000 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff817e5bf2 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffffffff887c6568 RBP: ffffc9000e804000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: dffffc0000000001 R12: 1ffff92001d0080c R13: dffffc0000000000 R14: ffffffff87e6b100 R15: 0000000000000000 FS: 00007fd0c55826c0(0000) GS:ffff8881f6800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc9000e803ff8 CR3: 0000000170ef7000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <#DF> </#DF> <TASK> [<ffffffff81f281d1>] __kasan_check_read+0x11/0x20 mm/kasan/shadow.c:31 [<ffffffff817e5bf2>] instrument_atomic_read include/linux/instrumented.h:72 [inline] [<ffffffff817e5bf2>] _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline] [<ffffffff817e5bf2>] cpumask_test_cpu include/linux/cpumask.h:506 [inline] [<ffffffff817e5bf2>] cpu_online include/linux/cpumask.h:1092 [inline] [<ffffffff817e5bf2>] trace_lock_acquire include/trace/events/lock.h:24 [inline] [<ffffffff817e5bf2>] lock_acquire+0xe2/0x590 kernel/locking/lockdep.c:5632 [<ffffffff8563221e>] rcu_lock_acquire+0x2e/0x40 include/linux/rcupdate.h:306 [<ffffffff8561464d>] rcu_read_lock include/linux/rcupdate.h:747 [inline] [<ffffffff8561464d>] ip6_pol_route+0x15d/0x1440 net/ipv6/route.c:2221 [<ffffffff85618120>] ip6_pol_route_output+0x50/0x80 net/ipv6/route.c:2606 [<ffffffff856f65b5>] pol_lookup_func include/net/ip6_fib.h:584 [inline] [<ffffffff856f65b5>] fib6_rule_lookup+0x265/0x620 net/ipv6/fib6_rules.c:116 [<ffffffff85618009>] ip6_route_output_flags_noref+0x2d9/0x3a0 net/ipv6/route.c:2638 [<ffffffff8561821a>] ip6_route_output_flags+0xca/0x340 net/ipv6/route.c:2651 [<ffffffff838bd5a3>] ip6_route_output include/net/ip6_route.h:100 [inline] [<ffffffff838bd5a3>] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:473 [inline] [<ffffffff838bd5a3>] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline] [<ffffffff838bd5a3>] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline] [<ffffffff838bd5a3>] ipvlan_queue_xmit+0xc33/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677 [<ffffffff838c2909>] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229 [<ffffffff84d03900>] netdev_start_xmit include/linux/netdevice.h:4966 [inline] [<ffffffff84d03900>] xmit_one net/core/dev.c:3644 [inline] [<ffffffff84d03900>] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660 [<ffffffff84d080e2>] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324 [<ffffffff855ce4cd>] dev_queue_xmit include/linux/netdevice.h:3067 [inline] [<ffffffff855ce4cd>] neigh_hh_output include/net/neighbour.h:529 [inline] [<f ---truncated--- | ||||
| CVE-2023-52791 | 1 Redhat | 1 Enterprise Linux | 2024-11-04 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: i2c: core: Run atomic i2c xfer when !preemptible Since bae1d3a05a8b, i2c transfers are non-atomic if preemption is disabled. However, non-atomic i2c transfers require preemption (e.g. in wait_for_completion() while waiting for the DMA). panic() calls preempt_disable_notrace() before calling emergency_restart(). Therefore, if an i2c device is used for the restart, the xfer should be atomic. This avoids warnings like: [ 12.667612] WARNING: CPU: 1 PID: 1 at kernel/rcu/tree_plugin.h:318 rcu_note_context_switch+0x33c/0x6b0 [ 12.676926] Voluntary context switch within RCU read-side critical section! ... [ 12.742376] schedule_timeout from wait_for_completion_timeout+0x90/0x114 [ 12.749179] wait_for_completion_timeout from tegra_i2c_wait_completion+0x40/0x70 ... [ 12.994527] atomic_notifier_call_chain from machine_restart+0x34/0x58 [ 13.001050] machine_restart from panic+0x2a8/0x32c Use !preemptible() instead, which is basically the same check as pre-v5.2. | ||||
| CVE-2023-52788 | 1 Redhat | 1 Enterprise Linux | 2024-11-04 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: i915/perf: Fix NULL deref bugs with drm_dbg() calls When i915 perf interface is not available dereferencing it will lead to NULL dereferences. As returning -ENOTSUPP is pretty clear return when perf interface is not available. [tursulin: added stable tag] (cherry picked from commit 36f27350ff745bd228ab04d7845dfbffc177a889) | ||||
| CVE-2023-52784 | 1 Redhat | 5 Enterprise Linux, Rhel Aus, Rhel E4s and 2 more | 2024-11-04 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bonding: stop the device in bond_setup_by_slave() Commit 9eed321cde22 ("net: lapbether: only support ethernet devices") has been able to keep syzbot away from net/lapb, until today. In the following splat [1], the issue is that a lapbether device has been created on a bonding device without members. Then adding a non ARPHRD_ETHER member forced the bonding master to change its type. The fix is to make sure we call dev_close() in bond_setup_by_slave() so that the potential linked lapbether devices (or any other devices having assumptions on the physical device) are removed. A similar bug has been addressed in commit 40baec225765 ("bonding: fix panic on non-ARPHRD_ETHER enslave failure") [1] skbuff: skb_under_panic: text:ffff800089508810 len:44 put:40 head:ffff0000c78e7c00 data:ffff0000c78e7bea tail:0x16 end:0x140 dev:bond0 kernel BUG at net/core/skbuff.c:192 ! Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 6007 Comm: syz-executor383 Not tainted 6.6.0-rc3-syzkaller-gbf6547d8715b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/04/2023 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : skb_panic net/core/skbuff.c:188 [inline] pc : skb_under_panic+0x13c/0x140 net/core/skbuff.c:202 lr : skb_panic net/core/skbuff.c:188 [inline] lr : skb_under_panic+0x13c/0x140 net/core/skbuff.c:202 sp : ffff800096a06aa0 x29: ffff800096a06ab0 x28: ffff800096a06ba0 x27: dfff800000000000 x26: ffff0000ce9b9b50 x25: 0000000000000016 x24: ffff0000c78e7bea x23: ffff0000c78e7c00 x22: 000000000000002c x21: 0000000000000140 x20: 0000000000000028 x19: ffff800089508810 x18: ffff800096a06100 x17: 0000000000000000 x16: ffff80008a629a3c x15: 0000000000000001 x14: 1fffe00036837a32 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000201 x10: 0000000000000000 x9 : cb50b496c519aa00 x8 : cb50b496c519aa00 x7 : 0000000000000001 x6 : 0000000000000001 x5 : ffff800096a063b8 x4 : ffff80008e280f80 x3 : ffff8000805ad11c x2 : 0000000000000001 x1 : 0000000100000201 x0 : 0000000000000086 Call trace: skb_panic net/core/skbuff.c:188 [inline] skb_under_panic+0x13c/0x140 net/core/skbuff.c:202 skb_push+0xf0/0x108 net/core/skbuff.c:2446 ip6gre_header+0xbc/0x738 net/ipv6/ip6_gre.c:1384 dev_hard_header include/linux/netdevice.h:3136 [inline] lapbeth_data_transmit+0x1c4/0x298 drivers/net/wan/lapbether.c:257 lapb_data_transmit+0x8c/0xb0 net/lapb/lapb_iface.c:447 lapb_transmit_buffer+0x178/0x204 net/lapb/lapb_out.c:149 lapb_send_control+0x220/0x320 net/lapb/lapb_subr.c:251 __lapb_disconnect_request+0x9c/0x17c net/lapb/lapb_iface.c:326 lapb_device_event+0x288/0x4e0 net/lapb/lapb_iface.c:492 notifier_call_chain+0x1a4/0x510 kernel/notifier.c:93 raw_notifier_call_chain+0x3c/0x50 kernel/notifier.c:461 call_netdevice_notifiers_info net/core/dev.c:1970 [inline] call_netdevice_notifiers_extack net/core/dev.c:2008 [inline] call_netdevice_notifiers net/core/dev.c:2022 [inline] __dev_close_many+0x1b8/0x3c4 net/core/dev.c:1508 dev_close_many+0x1e0/0x470 net/core/dev.c:1559 dev_close+0x174/0x250 net/core/dev.c:1585 lapbeth_device_event+0x2e4/0x958 drivers/net/wan/lapbether.c:466 notifier_call_chain+0x1a4/0x510 kernel/notifier.c:93 raw_notifier_call_chain+0x3c/0x50 kernel/notifier.c:461 call_netdevice_notifiers_info net/core/dev.c:1970 [inline] call_netdevice_notifiers_extack net/core/dev.c:2008 [inline] call_netdevice_notifiers net/core/dev.c:2022 [inline] __dev_close_many+0x1b8/0x3c4 net/core/dev.c:1508 dev_close_many+0x1e0/0x470 net/core/dev.c:1559 dev_close+0x174/0x250 net/core/dev.c:1585 bond_enslave+0x2298/0x30cc drivers/net/bonding/bond_main.c:2332 bond_do_ioctl+0x268/0xc64 drivers/net/bonding/bond_main.c:4539 dev_ifsioc+0x754/0x9ac dev_ioctl+0x4d8/0xd34 net/core/dev_ioctl.c:786 sock_do_ioctl+0x1d4/0x2d0 net/socket.c:1217 sock_ioctl+0x4e8/0x834 net/socket.c:1322 vfs_ioctl fs/ioctl.c:51 [inline] __do_ ---truncated--- | ||||
| CVE-2023-52781 | 1 Redhat | 1 Enterprise Linux | 2024-11-04 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: config: fix iteration issue in 'usb_get_bos_descriptor()' The BOS descriptor defines a root descriptor and is the base descriptor for accessing a family of related descriptors. Function 'usb_get_bos_descriptor()' encounters an iteration issue when skipping the 'USB_DT_DEVICE_CAPABILITY' descriptor type. This results in the same descriptor being read repeatedly. To address this issue, a 'goto' statement is introduced to ensure that the pointer and the amount read is updated correctly. This ensures that the function iterates to the next descriptor instead of reading the same descriptor repeatedly. | ||||
| CVE-2023-52777 | 1 Redhat | 1 Enterprise Linux | 2024-11-04 | 5.2 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix gtk offload status event locking The ath11k active pdevs are protected by RCU but the gtk offload status event handling code calling ath11k_mac_get_arvif_by_vdev_id() was not marked as a read-side critical section. Mark the code in question as an RCU read-side critical section to avoid any potential use-after-free issues. Compile tested only. | ||||
| CVE-2023-52775 | 1 Redhat | 1 Enterprise Linux | 2024-11-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: avoid data corruption caused by decline We found a data corruption issue during testing of SMC-R on Redis applications. The benchmark has a low probability of reporting a strange error as shown below. "Error: Protocol error, got "\xe2" as reply type byte" Finally, we found that the retrieved error data was as follows: 0xE2 0xD4 0xC3 0xD9 0x04 0x00 0x2C 0x20 0xA6 0x56 0x00 0x16 0x3E 0x0C 0xCB 0x04 0x02 0x01 0x00 0x00 0x20 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xE2 It is quite obvious that this is a SMC DECLINE message, which means that the applications received SMC protocol message. We found that this was caused by the following situations: client server ¦ clc proposal -------------> ¦ clc accept <------------- ¦ clc confirm -------------> wait llc confirm send llc confirm ¦failed llc confirm ¦ x------ (after 2s)timeout wait llc confirm rsp wait decline (after 1s) timeout (after 2s) timeout ¦ decline --------------> ¦ decline <-------------- As a result, a decline message was sent in the implementation, and this message was read from TCP by the already-fallback connection. This patch double the client timeout as 2x of the server value, With this simple change, the Decline messages should never cross or collide (during Confirm link timeout). This issue requires an immediate solution, since the protocol updates involve a more long-term solution. | ||||
| CVE-2023-52764 | 1 Redhat | 1 Enterprise Linux | 2024-11-04 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: gspca: cpia1: shift-out-of-bounds in set_flicker Syzkaller reported the following issue: UBSAN: shift-out-of-bounds in drivers/media/usb/gspca/cpia1.c:1031:27 shift exponent 245 is too large for 32-bit type 'int' When the value of the variable "sd->params.exposure.gain" exceeds the number of bits in an integer, a shift-out-of-bounds error is reported. It is triggered because the variable "currentexp" cannot be left-shifted by more than the number of bits in an integer. In order to avoid invalid range during left-shift, the conditional expression is added. | ||||