| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: compress: fix race condition of overwrite vs truncate
pos_fsstress testcase complains a panic as belew:
------------[ cut here ]------------
kernel BUG at fs/f2fs/compress.c:1082!
invalid opcode: 0000 [#1] SMP PTI
CPU: 4 PID: 2753477 Comm: kworker/u16:2 Tainted: G OE 5.12.0-rc1-custom #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
Workqueue: writeback wb_workfn (flush-252:16)
RIP: 0010:prepare_compress_overwrite+0x4c0/0x760 [f2fs]
Call Trace:
f2fs_prepare_compress_overwrite+0x5f/0x80 [f2fs]
f2fs_write_cache_pages+0x468/0x8a0 [f2fs]
f2fs_write_data_pages+0x2a4/0x2f0 [f2fs]
do_writepages+0x38/0xc0
__writeback_single_inode+0x44/0x2a0
writeback_sb_inodes+0x223/0x4d0
__writeback_inodes_wb+0x56/0xf0
wb_writeback+0x1dd/0x290
wb_workfn+0x309/0x500
process_one_work+0x220/0x3c0
worker_thread+0x53/0x420
kthread+0x12f/0x150
ret_from_fork+0x22/0x30
The root cause is truncate() may race with overwrite as below,
so that one reference count left in page can not guarantee the
page attaching in mapping tree all the time, after truncation,
later find_lock_page() may return NULL pointer.
- prepare_compress_overwrite
- f2fs_pagecache_get_page
- unlock_page
- f2fs_setattr
- truncate_setsize
- truncate_inode_page
- delete_from_page_cache
- find_lock_page
Fix this by avoiding referencing updated page. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: ucsi: Retrieve all the PDOs instead of just the first 4
commit 4dbc6a4ef06d ("usb: typec: ucsi: save power data objects
in PD mode") introduced retrieval of the PDOs when connected to a
PD-capable source. But only the first 4 PDOs are received since
that is the maximum number that can be fetched at a time given the
MESSAGE_IN length limitation (16 bytes). However, as per the PD spec
a connected source may advertise up to a maximum of 7 PDOs.
If such a source is connected it's possible the PPM could have
negotiated a power contract with one of the PDOs at index greater
than 4, and would be reflected in the request data object's (RDO)
object position field. This would result in an out-of-bounds access
when the rdo_index() is used to index into the src_pdos array in
ucsi_psy_get_voltage_now().
With the help of the UBSAN -fsanitize=array-bounds checker enabled
this exact issue is revealed when connecting to a PD source adapter
that advertise 5 PDOs and the PPM enters a contract having selected
the 5th one.
[ 151.545106][ T70] Unexpected kernel BRK exception at EL1
[ 151.545112][ T70] Internal error: BRK handler: f2005512 [#1] PREEMPT SMP
...
[ 151.545499][ T70] pc : ucsi_psy_get_prop+0x208/0x20c
[ 151.545507][ T70] lr : power_supply_show_property+0xc0/0x328
...
[ 151.545542][ T70] Call trace:
[ 151.545544][ T70] ucsi_psy_get_prop+0x208/0x20c
[ 151.545546][ T70] power_supply_uevent+0x1a4/0x2f0
[ 151.545550][ T70] dev_uevent+0x200/0x384
[ 151.545555][ T70] kobject_uevent_env+0x1d4/0x7e8
[ 151.545557][ T70] power_supply_changed_work+0x174/0x31c
[ 151.545562][ T70] process_one_work+0x244/0x6f0
[ 151.545564][ T70] worker_thread+0x3e0/0xa64
We can resolve this by instead retrieving and storing up to the
maximum of 7 PDOs in the con->src_pdos array. This would involve
two calls to the GET_PDOS command. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: core: fix ioctl handlers removal
Currently ioctl handlers are removed twice. For the first time during
iio_device_unregister() then later on inside
iio_device_unregister_eventset() and iio_buffers_free_sysfs_and_mask().
Double free leads to kernel panic.
Fix this by not touching ioctl handlers list directly but rather
letting code responsible for registration call the matching cleanup
routine itself. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nVMX: Always make an attempt to map eVMCS after migration
When enlightened VMCS is in use and nested state is migrated with
vmx_get_nested_state()/vmx_set_nested_state() KVM can't map evmcs
page right away: evmcs gpa is not 'struct kvm_vmx_nested_state_hdr'
and we can't read it from VP assist page because userspace may decide
to restore HV_X64_MSR_VP_ASSIST_PAGE after restoring nested state
(and QEMU, for example, does exactly that). To make sure eVMCS is
mapped /vmx_set_nested_state() raises KVM_REQ_GET_NESTED_STATE_PAGES
request.
Commit f2c7ef3ba955 ("KVM: nSVM: cancel KVM_REQ_GET_NESTED_STATE_PAGES
on nested vmexit") added KVM_REQ_GET_NESTED_STATE_PAGES clearing to
nested_vmx_vmexit() to make sure MSR permission bitmap is not switched
when an immediate exit from L2 to L1 happens right after migration (caused
by a pending event, for example). Unfortunately, in the exact same
situation we still need to have eVMCS mapped so
nested_sync_vmcs12_to_shadow() reflects changes in VMCS12 to eVMCS.
As a band-aid, restore nested_get_evmcs_page() when clearing
KVM_REQ_GET_NESTED_STATE_PAGES in nested_vmx_vmexit(). The 'fix' is far
from being ideal as we can't easily propagate possible failures and even if
we could, this is most likely already too late to do so. The whole
'KVM_REQ_GET_NESTED_STATE_PAGES' idea for mapping eVMCS after migration
seems to be fragile as we diverge too much from the 'native' path when
vmptr loading happens on vmx_set_nested_state(). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: VMX: Disable preemption when probing user return MSRs
Disable preemption when probing a user return MSR via RDSMR/WRMSR. If
the MSR holds a different value per logical CPU, the WRMSR could corrupt
the host's value if KVM is preempted between the RDMSR and WRMSR, and
then rescheduled on a different CPU.
Opportunistically land the helper in common x86, SVM will use the helper
in a future commit. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915: Fix crash in auto_retire
The retire logic uses the 2 lower bits of the pointer to the retire
function to store flags. However, the auto_retire function is not
guaranteed to be aligned to a multiple of 4, which causes crashes as
we jump to the wrong address, for example like this:
2021-04-24T18:03:53.804300Z WARNING kernel: [ 516.876901] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
2021-04-24T18:03:53.804310Z WARNING kernel: [ 516.876906] CPU: 7 PID: 146 Comm: kworker/u16:6 Tainted: G U 5.4.105-13595-g3cd84167b2df #1
2021-04-24T18:03:53.804311Z WARNING kernel: [ 516.876907] Hardware name: Google Volteer2/Volteer2, BIOS Google_Volteer2.13672.76.0 02/22/2021
2021-04-24T18:03:53.804312Z WARNING kernel: [ 516.876911] Workqueue: events_unbound active_work
2021-04-24T18:03:53.804313Z WARNING kernel: [ 516.876914] RIP: 0010:auto_retire+0x1/0x20
2021-04-24T18:03:53.804314Z WARNING kernel: [ 516.876916] Code: e8 01 f2 ff ff eb 02 31 db 48 89 d8 5b 5d c3 0f 1f 44 00 00 55 48 89 e5 f0 ff 87 c8 00 00 00 0f 88 ab 47 4a 00 31 c0 5d c3 0f <1f> 44 00 00 55 48 89 e5 f0 ff 8f c8 00 00 00 0f 88 9a 47 4a 00 74
2021-04-24T18:03:53.804319Z WARNING kernel: [ 516.876918] RSP: 0018:ffff9b4d809fbe38 EFLAGS: 00010286
2021-04-24T18:03:53.804320Z WARNING kernel: [ 516.876919] RAX: 0000000000000007 RBX: ffff927915079600 RCX: 0000000000000007
2021-04-24T18:03:53.804320Z WARNING kernel: [ 516.876921] RDX: ffff9b4d809fbe40 RSI: 0000000000000286 RDI: ffff927915079600
2021-04-24T18:03:53.804321Z WARNING kernel: [ 516.876922] RBP: ffff9b4d809fbe68 R08: 8080808080808080 R09: fefefefefefefeff
2021-04-24T18:03:53.804321Z WARNING kernel: [ 516.876924] R10: 0000000000000010 R11: ffffffff92e44bd8 R12: ffff9279150796a0
2021-04-24T18:03:53.804322Z WARNING kernel: [ 516.876925] R13: ffff92791c368180 R14: ffff927915079640 R15: 000000001c867605
2021-04-24T18:03:53.804323Z WARNING kernel: [ 516.876926] FS: 0000000000000000(0000) GS:ffff92791ffc0000(0000) knlGS:0000000000000000
2021-04-24T18:03:53.804323Z WARNING kernel: [ 516.876928] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
2021-04-24T18:03:53.804324Z WARNING kernel: [ 516.876929] CR2: 0000239514955000 CR3: 00000007f82da001 CR4: 0000000000760ee0
2021-04-24T18:03:53.804325Z WARNING kernel: [ 516.876930] PKRU: 55555554
2021-04-24T18:03:53.804325Z WARNING kernel: [ 516.876931] Call Trace:
2021-04-24T18:03:53.804326Z WARNING kernel: [ 516.876935] __active_retire+0x77/0xcf
2021-04-24T18:03:53.804326Z WARNING kernel: [ 516.876939] process_one_work+0x1da/0x394
2021-04-24T18:03:53.804327Z WARNING kernel: [ 516.876941] worker_thread+0x216/0x375
2021-04-24T18:03:53.804327Z WARNING kernel: [ 516.876944] kthread+0x147/0x156
2021-04-24T18:03:53.804335Z WARNING kernel: [ 516.876946] ? pr_cont_work+0x58/0x58
2021-04-24T18:03:53.804335Z WARNING kernel: [ 516.876948] ? kthread_blkcg+0x2e/0x2e
2021-04-24T18:03:53.804336Z WARNING kernel: [ 516.876950] ret_from_fork+0x1f/0x40
2021-04-24T18:03:53.804336Z WARNING kernel: [ 516.876952] Modules linked in: cdc_mbim cdc_ncm cdc_wdm xt_cgroup rfcomm cmac algif_hash algif_skcipher af_alg xt_MASQUERADE uinput snd_soc_rt5682_sdw snd_soc_rt5682 snd_soc_max98373_sdw snd_soc_max98373 snd_soc_rl6231 regmap_sdw snd_soc_sof_sdw snd_soc_hdac_hdmi snd_soc_dmic snd_hda_codec_hdmi snd_sof_pci snd_sof_intel_hda_common intel_ipu6_psys snd_sof_xtensa_dsp soundwire_intel soundwire_generic_allocation soundwire_cadence snd_sof_intel_hda snd_sof snd_soc_hdac_hda snd_soc_acpi_intel_match snd_soc_acpi snd_hda_ext_core soundwire_bus snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hwdep snd_hda_core intel_ipu6_isys videobuf2_dma_contig videobuf2_v4l2 videobuf2_common videobuf2_memops mei_hdcp intel_ipu6 ov2740 ov8856 at24 sx9310 dw9768 v4l2_fwnode cros_ec_typec intel_pmc_mux roles acpi_als typec fuse iio_trig_sysfs cros_ec_light_prox cros_ec_lid_angle cros_ec_sensors cros
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: Avoid potential use after free in MHI send
It is possible that the MHI ul_callback will be invoked immediately
following the queueing of the skb for transmission, leading to the
callback decrementing the refcount of the associated sk and freeing the
skb.
As such the dereference of skb and the increment of the sk refcount must
happen before the skb is queued, to avoid the skb to be used after free
and potentially the sk to drop its last refcount.. |
| In the Linux kernel, the following vulnerability has been resolved:
ovl: fix leaked dentry
Since commit 6815f479ca90 ("ovl: use only uppermetacopy state in
ovl_lookup()"), overlayfs doesn't put temporary dentry when there is a
metacopy error, which leads to dentry leaks when shutting down the related
superblock:
overlayfs: refusing to follow metacopy origin for (/file0)
...
BUG: Dentry (____ptrval____){i=3f33,n=file3} still in use (1) [unmount of overlay overlay]
...
WARNING: CPU: 1 PID: 432 at umount_check.cold+0x107/0x14d
CPU: 1 PID: 432 Comm: unmount-overlay Not tainted 5.12.0-rc5 #1
...
RIP: 0010:umount_check.cold+0x107/0x14d
...
Call Trace:
d_walk+0x28c/0x950
? dentry_lru_isolate+0x2b0/0x2b0
? __kasan_slab_free+0x12/0x20
do_one_tree+0x33/0x60
shrink_dcache_for_umount+0x78/0x1d0
generic_shutdown_super+0x70/0x440
kill_anon_super+0x3e/0x70
deactivate_locked_super+0xc4/0x160
deactivate_super+0xfa/0x140
cleanup_mnt+0x22e/0x370
__cleanup_mnt+0x1a/0x30
task_work_run+0x139/0x210
do_exit+0xb0c/0x2820
? __kasan_check_read+0x1d/0x30
? find_held_lock+0x35/0x160
? lock_release+0x1b6/0x660
? mm_update_next_owner+0xa20/0xa20
? reacquire_held_locks+0x3f0/0x3f0
? __sanitizer_cov_trace_const_cmp4+0x22/0x30
do_group_exit+0x135/0x380
__do_sys_exit_group.isra.0+0x20/0x20
__x64_sys_exit_group+0x3c/0x50
do_syscall_64+0x45/0x70
entry_SYSCALL_64_after_hwframe+0x44/0xae
...
VFS: Busy inodes after unmount of overlay. Self-destruct in 5 seconds. Have a nice day...
This fix has been tested with a syzkaller reproducer. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/core: Fix unconditional security_locked_down() call
Currently, the lockdown state is queried unconditionally, even though
its result is used only if the PERF_SAMPLE_REGS_INTR bit is set in
attr.sample_type. While that doesn't matter in case of the Lockdown LSM,
it causes trouble with the SELinux's lockdown hook implementation.
SELinux implements the locked_down hook with a check whether the current
task's type has the corresponding "lockdown" class permission
("integrity" or "confidentiality") allowed in the policy. This means
that calling the hook when the access control decision would be ignored
generates a bogus permission check and audit record.
Fix this by checking sample_type first and only calling the hook when
its result would be honored. |
| In the Linux kernel, the following vulnerability has been resolved:
bus: mhi: pci_generic: Remove WQ_MEM_RECLAIM flag from state workqueue
A recent change created a dedicated workqueue for the state-change work
with WQ_HIGHPRI (no strong reason for that) and WQ_MEM_RECLAIM flags,
but the state-change work (mhi_pm_st_worker) does not guarantee forward
progress under memory pressure, and will even wait on various memory
allocations when e.g. creating devices, loading firmware, etc... The
work is then not part of a memory reclaim path...
Moreover, this causes a warning in check_flush_dependency() since we end
up in code that flushes a non-reclaim workqueue:
[ 40.969601] workqueue: WQ_MEM_RECLAIM mhi_hiprio_wq:mhi_pm_st_worker [mhi] is flushing !WQ_MEM_RECLAIM events_highpri:flush_backlog
[ 40.969612] WARNING: CPU: 4 PID: 158 at kernel/workqueue.c:2607 check_flush_dependency+0x11c/0x140
[ 40.969733] Call Trace:
[ 40.969740] __flush_work+0x97/0x1d0
[ 40.969745] ? wake_up_process+0x15/0x20
[ 40.969749] ? insert_work+0x70/0x80
[ 40.969750] ? __queue_work+0x14a/0x3e0
[ 40.969753] flush_work+0x10/0x20
[ 40.969756] rollback_registered_many+0x1c9/0x510
[ 40.969759] unregister_netdevice_queue+0x94/0x120
[ 40.969761] unregister_netdev+0x1d/0x30
[ 40.969765] mhi_net_remove+0x1a/0x40 [mhi_net]
[ 40.969770] mhi_driver_remove+0x124/0x250 [mhi]
[ 40.969776] device_release_driver_internal+0xf0/0x1d0
[ 40.969778] device_release_driver+0x12/0x20
[ 40.969782] bus_remove_device+0xe1/0x150
[ 40.969786] device_del+0x17b/0x3e0
[ 40.969791] mhi_destroy_device+0x9a/0x100 [mhi]
[ 40.969796] ? mhi_unmap_single_use_bb+0x50/0x50 [mhi]
[ 40.969799] device_for_each_child+0x5e/0xa0
[ 40.969804] mhi_pm_st_worker+0x921/0xf50 [mhi] |
| In the Linux kernel, the following vulnerability has been resolved:
bus: mhi: core: Fix invalid error returning in mhi_queue
mhi_queue returns an error when the doorbell is not accessible in
the current state. This can happen when the device is in non M0
state, like M3, and needs to be waken-up prior ringing the DB. This
case is managed earlier by triggering an asynchronous M3 exit via
controller resume/suspend callbacks, that in turn will cause M0
transition and DB update.
So, since it's not an error but just delaying of doorbell update, there
is no reason to return an error.
This also fixes a use after free error for skb case, indeed a caller
queuing skb will try to free the skb if the queueing fails, but in
that case queueing has been done. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/zcrypt: fix zcard and zqueue hot-unplug memleak
Tests with kvm and a kmemdebug kernel showed, that on hot unplug the
zcard and zqueue structs for the unplugged card or queue are not
properly freed because of a mismatch with get/put for the embedded
kref counter.
This fix now adjusts the handling of the kref counters. With init the
kref counter starts with 1. This initial value needs to drop to zero
with the unregister of the card or queue to trigger the release and
free the object. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost-vdpa: fix vm_flags for virtqueue doorbell mapping
The virtqueue doorbell is usually implemented via registeres but we
don't provide the necessary vma->flags like VM_PFNMAP. This may cause
several issues e.g when userspace tries to map the doorbell via vhost
IOTLB, kernel may panic due to the page is not backed by page
structure. This patch fixes this by setting the necessary
vm_flags. With this patch, try to map doorbell via IOTLB will fail
with bad address. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: physmap: physmap-bt1-rom: Fix unintentional stack access
Cast &data to (char *) in order to avoid unintentionally accessing
the stack.
Notice that data is of type u32, so any increment to &data
will be in the order of 4-byte chunks, and this piece of code
is actually intended to be a byte offset.
Addresses-Coverity-ID: 1497765 ("Out-of-bounds access") |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Reserve extra IRQ vectors
Commit a6dcfe08487e ("scsi: qla2xxx: Limit interrupt vectors to number of
CPUs") lowers the number of allocated MSI-X vectors to the number of CPUs.
That breaks vector allocation assumptions in qla83xx_iospace_config(),
qla24xx_enable_msix() and qla2x00_iospace_config(). Either of the functions
computes maximum number of qpairs as:
ha->max_qpairs = ha->msix_count - 1 (MB interrupt) - 1 (default
response queue) - 1 (ATIO, in dual or pure target mode)
max_qpairs is set to zero in case of two CPUs and initiator mode. The
number is then used to allocate ha->queue_pair_map inside
qla2x00_alloc_queues(). No allocation happens and ha->queue_pair_map is
left NULL but the driver thinks there are queue pairs available.
qla2xxx_queuecommand() tries to find a qpair in the map and crashes:
if (ha->mqenable) {
uint32_t tag;
uint16_t hwq;
struct qla_qpair *qpair = NULL;
tag = blk_mq_unique_tag(cmd->request);
hwq = blk_mq_unique_tag_to_hwq(tag);
qpair = ha->queue_pair_map[hwq]; # <- HERE
if (qpair)
return qla2xxx_mqueuecommand(host, cmd, qpair);
}
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 0 PID: 72 Comm: kworker/u4:3 Tainted: G W 5.10.0-rc1+ #25
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
Workqueue: scsi_wq_7 fc_scsi_scan_rport [scsi_transport_fc]
RIP: 0010:qla2xxx_queuecommand+0x16b/0x3f0 [qla2xxx]
Call Trace:
scsi_queue_rq+0x58c/0xa60
blk_mq_dispatch_rq_list+0x2b7/0x6f0
? __sbitmap_get_word+0x2a/0x80
__blk_mq_sched_dispatch_requests+0xb8/0x170
blk_mq_sched_dispatch_requests+0x2b/0x50
__blk_mq_run_hw_queue+0x49/0xb0
__blk_mq_delay_run_hw_queue+0xfb/0x150
blk_mq_sched_insert_request+0xbe/0x110
blk_execute_rq+0x45/0x70
__scsi_execute+0x10e/0x250
scsi_probe_and_add_lun+0x228/0xda0
__scsi_scan_target+0xf4/0x620
? __pm_runtime_resume+0x4f/0x70
scsi_scan_target+0x100/0x110
fc_scsi_scan_rport+0xa1/0xb0 [scsi_transport_fc]
process_one_work+0x1ea/0x3b0
worker_thread+0x28/0x3b0
? process_one_work+0x3b0/0x3b0
kthread+0x112/0x130
? kthread_park+0x80/0x80
ret_from_fork+0x22/0x30
The driver should allocate enough vectors to provide every CPU it's own HW
queue and still handle reserved (MB, RSP, ATIO) interrupts.
The change fixes the crash on dual core VM and prevents unbalanced QP
allocation where nr_hw_queues is two less than the number of CPUs. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: uniphier-sd: Fix a resource leak in the remove function
A 'tmio_mmc_host_free()' call is missing in the remove function, in order
to balance a 'tmio_mmc_host_alloc()' call in the probe.
This is done in the error handling path of the probe, but not in the remove
function.
Add the missing call. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/gic-v3: Do not enable irqs when handling spurious interrups
We triggered the following error while running our 4.19 kernel
with the pseudo-NMI patches backported to it:
[ 14.816231] ------------[ cut here ]------------
[ 14.816231] kernel BUG at irq.c:99!
[ 14.816232] Internal error: Oops - BUG: 0 [#1] SMP
[ 14.816232] Process swapper/0 (pid: 0, stack limit = 0x(____ptrval____))
[ 14.816233] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 4.19.95.aarch64 #14
[ 14.816233] Hardware name: evb (DT)
[ 14.816234] pstate: 80400085 (Nzcv daIf +PAN -UAO)
[ 14.816234] pc : asm_nmi_enter+0x94/0x98
[ 14.816235] lr : asm_nmi_enter+0x18/0x98
[ 14.816235] sp : ffff000008003c50
[ 14.816235] pmr_save: 00000070
[ 14.816237] x29: ffff000008003c50 x28: ffff0000095f56c0
[ 14.816238] x27: 0000000000000000 x26: ffff000008004000
[ 14.816239] x25: 00000000015e0000 x24: ffff8008fb916000
[ 14.816240] x23: 0000000020400005 x22: ffff0000080817cc
[ 14.816241] x21: ffff000008003da0 x20: 0000000000000060
[ 14.816242] x19: 00000000000003ff x18: ffffffffffffffff
[ 14.816243] x17: 0000000000000008 x16: 003d090000000000
[ 14.816244] x15: ffff0000095ea6c8 x14: ffff8008fff5ab40
[ 14.816244] x13: ffff8008fff58b9d x12: 0000000000000000
[ 14.816245] x11: ffff000008c8a200 x10: 000000008e31fca5
[ 14.816246] x9 : ffff000008c8a208 x8 : 000000000000000f
[ 14.816247] x7 : 0000000000000004 x6 : ffff8008fff58b9e
[ 14.816248] x5 : 0000000000000000 x4 : 0000000080000000
[ 14.816249] x3 : 0000000000000000 x2 : 0000000080000000
[ 14.816250] x1 : 0000000000120000 x0 : ffff0000095f56c0
[ 14.816251] Call trace:
[ 14.816251] asm_nmi_enter+0x94/0x98
[ 14.816251] el1_irq+0x8c/0x180 (IRQ C)
[ 14.816252] gic_handle_irq+0xbc/0x2e4
[ 14.816252] el1_irq+0xcc/0x180 (IRQ B)
[ 14.816253] arch_timer_handler_virt+0x38/0x58
[ 14.816253] handle_percpu_devid_irq+0x90/0x240
[ 14.816253] generic_handle_irq+0x34/0x50
[ 14.816254] __handle_domain_irq+0x68/0xc0
[ 14.816254] gic_handle_irq+0xf8/0x2e4
[ 14.816255] el1_irq+0xcc/0x180 (IRQ A)
[ 14.816255] arch_cpu_idle+0x34/0x1c8
[ 14.816255] default_idle_call+0x24/0x44
[ 14.816256] do_idle+0x1d0/0x2c8
[ 14.816256] cpu_startup_entry+0x28/0x30
[ 14.816256] rest_init+0xb8/0xc8
[ 14.816257] start_kernel+0x4c8/0x4f4
[ 14.816257] Code: 940587f1 d5384100 b9401001 36a7fd01 (d4210000)
[ 14.816258] Modules linked in: start_dp(O) smeth(O)
[ 15.103092] ---[ end trace 701753956cb14aa8 ]---
[ 15.103093] Kernel panic - not syncing: Fatal exception in interrupt
[ 15.103099] SMP: stopping secondary CPUs
[ 15.103100] Kernel Offset: disabled
[ 15.103100] CPU features: 0x36,a2400218
[ 15.103100] Memory Limit: none
which is cause by a 'BUG_ON(in_nmi())' in nmi_enter().
From the call trace, we can find three interrupts (noted A, B, C above):
interrupt (A) is preempted by (B), which is further interrupted by (C).
Subsequent investigations show that (B) results in nmi_enter() being
called, but that it actually is a spurious interrupt. Furthermore,
interrupts are reenabled in the context of (B), and (C) fires with
NMI priority. We end-up with a nested NMI situation, something
we definitely do not want to (and cannot) handle.
The bug here is that spurious interrupts should never result in any
state change, and we should just return to the interrupted context.
Moving the handling of spurious interrupts as early as possible in
the GICv3 handler fixes this issue.
[maz: rewrote commit message, corrected Fixes: tag] |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: Return correct error code from smb2_get_enc_key
Avoid a warning if the error percolates back up:
[440700.376476] CIFS VFS: \\otters.example.com crypt_message: Could not get encryption key
[440700.386947] ------------[ cut here ]------------
[440700.386948] err = 1
[440700.386977] WARNING: CPU: 11 PID: 2733 at /build/linux-hwe-5.4-p6lk6L/linux-hwe-5.4-5.4.0/lib/errseq.c:74 errseq_set+0x5c/0x70
...
[440700.397304] CPU: 11 PID: 2733 Comm: tar Tainted: G OE 5.4.0-70-generic #78~18.04.1-Ubuntu
...
[440700.397334] Call Trace:
[440700.397346] __filemap_set_wb_err+0x1a/0x70
[440700.397419] cifs_writepages+0x9c7/0xb30 [cifs]
[440700.397426] do_writepages+0x4b/0xe0
[440700.397444] __filemap_fdatawrite_range+0xcb/0x100
[440700.397455] filemap_write_and_wait+0x42/0xa0
[440700.397486] cifs_setattr+0x68b/0xf30 [cifs]
[440700.397493] notify_change+0x358/0x4a0
[440700.397500] utimes_common+0xe9/0x1c0
[440700.397510] do_utimes+0xc5/0x150
[440700.397520] __x64_sys_utimensat+0x88/0xd0 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix race between transaction aborts and fsyncs leading to use-after-free
There is a race between a task aborting a transaction during a commit,
a task doing an fsync and the transaction kthread, which leads to an
use-after-free of the log root tree. When this happens, it results in a
stack trace like the following:
BTRFS info (device dm-0): forced readonly
BTRFS warning (device dm-0): Skipping commit of aborted transaction.
BTRFS: error (device dm-0) in cleanup_transaction:1958: errno=-5 IO failure
BTRFS warning (device dm-0): lost page write due to IO error on /dev/mapper/error-test (-5)
BTRFS warning (device dm-0): Skipping commit of aborted transaction.
BTRFS warning (device dm-0): direct IO failed ino 261 rw 0,0 sector 0xa4e8 len 4096 err no 10
BTRFS error (device dm-0): error writing primary super block to device 1
BTRFS warning (device dm-0): direct IO failed ino 261 rw 0,0 sector 0x12e000 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 261 rw 0,0 sector 0x12e008 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 261 rw 0,0 sector 0x12e010 len 4096 err no 10
BTRFS: error (device dm-0) in write_all_supers:4110: errno=-5 IO failure (1 errors while writing supers)
BTRFS: error (device dm-0) in btrfs_sync_log:3308: errno=-5 IO failure
general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b68: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI
CPU: 2 PID: 2458471 Comm: fsstress Not tainted 5.12.0-rc5-btrfs-next-84 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
RIP: 0010:__mutex_lock+0x139/0xa40
Code: c0 74 19 (...)
RSP: 0018:ffff9f18830d7b00 EFLAGS: 00010202
RAX: 6b6b6b6b6b6b6b68 RBX: 0000000000000001 RCX: 0000000000000002
RDX: ffffffffb9c54d13 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff9f18830d7bc0 R08: 0000000000000000 R09: 0000000000000000
R10: ffff9f18830d7be0 R11: 0000000000000001 R12: ffff8c6cd199c040
R13: ffff8c6c95821358 R14: 00000000fffffffb R15: ffff8c6cbcf01358
FS: 00007fa9140c2b80(0000) GS:ffff8c6fac600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa913d52000 CR3: 000000013d2b4003 CR4: 0000000000370ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
? __btrfs_handle_fs_error+0xde/0x146 [btrfs]
? btrfs_sync_log+0x7c1/0xf20 [btrfs]
? btrfs_sync_log+0x7c1/0xf20 [btrfs]
btrfs_sync_log+0x7c1/0xf20 [btrfs]
btrfs_sync_file+0x40c/0x580 [btrfs]
do_fsync+0x38/0x70
__x64_sys_fsync+0x10/0x20
do_syscall_64+0x33/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fa9142a55c3
Code: 8b 15 09 (...)
RSP: 002b:00007fff26278d48 EFLAGS: 00000246 ORIG_RAX: 000000000000004a
RAX: ffffffffffffffda RBX: 0000563c83cb4560 RCX: 00007fa9142a55c3
RDX: 00007fff26278cb0 RSI: 00007fff26278cb0 RDI: 0000000000000005
RBP: 0000000000000005 R08: 0000000000000001 R09: 00007fff26278d5c
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000340
R13: 00007fff26278de0 R14: 00007fff26278d96 R15: 0000563c83ca57c0
Modules linked in: btrfs dm_zero dm_snapshot dm_thin_pool (...)
---[ end trace ee2f1b19327d791d ]---
The steps that lead to this crash are the following:
1) We are at transaction N;
2) We have two tasks with a transaction handle attached to transaction N.
Task A and Task B. Task B is doing an fsync;
3) Task B is at btrfs_sync_log(), and has saved fs_info->log_root_tree
into a local variable named 'log_root_tree' at the top of
btrfs_sync_log(). Task B is about to call write_all_supers(), but
before that...
4) Task A calls btrfs_commit_transaction(), and after it sets the
transaction state to TRANS_STATE_COMMIT_START, an error happens before
it w
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
riscv/kprobe: fix kernel panic when invoking sys_read traced by kprobe
The execution of sys_read end up hitting a BUG_ON() in __find_get_block
after installing kprobe at sys_read, the BUG message like the following:
[ 65.708663] ------------[ cut here ]------------
[ 65.709987] kernel BUG at fs/buffer.c:1251!
[ 65.711283] Kernel BUG [#1]
[ 65.712032] Modules linked in:
[ 65.712925] CPU: 0 PID: 51 Comm: sh Not tainted 5.12.0-rc4 #1
[ 65.714407] Hardware name: riscv-virtio,qemu (DT)
[ 65.715696] epc : __find_get_block+0x218/0x2c8
[ 65.716835] ra : __getblk_gfp+0x1c/0x4a
[ 65.717831] epc : ffffffe00019f11e ra : ffffffe00019f56a sp : ffffffe002437930
[ 65.719553] gp : ffffffe000f06030 tp : ffffffe0015abc00 t0 : ffffffe00191e038
[ 65.721290] t1 : ffffffe00191e038 t2 : 000000000000000a s0 : ffffffe002437960
[ 65.723051] s1 : ffffffe00160ad00 a0 : ffffffe00160ad00 a1 : 000000000000012a
[ 65.724772] a2 : 0000000000000400 a3 : 0000000000000008 a4 : 0000000000000040
[ 65.726545] a5 : 0000000000000000 a6 : ffffffe00191e000 a7 : 0000000000000000
[ 65.728308] s2 : 000000000000012a s3 : 0000000000000400 s4 : 0000000000000008
[ 65.730049] s5 : 000000000000006c s6 : ffffffe00240f800 s7 : ffffffe000f080a8
[ 65.731802] s8 : 0000000000000001 s9 : 000000000000012a s10: 0000000000000008
[ 65.733516] s11: 0000000000000008 t3 : 00000000000003ff t4 : 000000000000000f
[ 65.734434] t5 : 00000000000003ff t6 : 0000000000040000
[ 65.734613] status: 0000000000000100 badaddr: 0000000000000000 cause: 0000000000000003
[ 65.734901] Call Trace:
[ 65.735076] [<ffffffe00019f11e>] __find_get_block+0x218/0x2c8
[ 65.735417] [<ffffffe00020017a>] __ext4_get_inode_loc+0xb2/0x2f6
[ 65.735618] [<ffffffe000201b6c>] ext4_get_inode_loc+0x3a/0x8a
[ 65.735802] [<ffffffe000203380>] ext4_reserve_inode_write+0x2e/0x8c
[ 65.735999] [<ffffffe00020357a>] __ext4_mark_inode_dirty+0x4c/0x18e
[ 65.736208] [<ffffffe000206bb0>] ext4_dirty_inode+0x46/0x66
[ 65.736387] [<ffffffe000192914>] __mark_inode_dirty+0x12c/0x3da
[ 65.736576] [<ffffffe000180dd2>] touch_atime+0x146/0x150
[ 65.736748] [<ffffffe00010d762>] filemap_read+0x234/0x246
[ 65.736920] [<ffffffe00010d834>] generic_file_read_iter+0xc0/0x114
[ 65.737114] [<ffffffe0001f5d7a>] ext4_file_read_iter+0x42/0xea
[ 65.737310] [<ffffffe000163f2c>] new_sync_read+0xe2/0x15a
[ 65.737483] [<ffffffe000165814>] vfs_read+0xca/0xf2
[ 65.737641] [<ffffffe000165bae>] ksys_read+0x5e/0xc8
[ 65.737816] [<ffffffe000165c26>] sys_read+0xe/0x16
[ 65.737973] [<ffffffe000003972>] ret_from_syscall+0x0/0x2
[ 65.738858] ---[ end trace fe93f985456c935d ]---
A simple reproducer looks like:
echo 'p:myprobe sys_read fd=%a0 buf=%a1 count=%a2' > /sys/kernel/debug/tracing/kprobe_events
echo 1 > /sys/kernel/debug/tracing/events/kprobes/myprobe/enable
cat /sys/kernel/debug/tracing/trace
Here's what happens to hit that BUG_ON():
1) After installing kprobe at entry of sys_read, the first instruction
is replaced by 'ebreak' instruction on riscv64 platform.
2) Once kernel reach the 'ebreak' instruction at the entry of sys_read,
it trap into the riscv breakpoint handler, where it do something to
setup for coming single-step of origin instruction, including backup
the 'sstatus' in pt_regs, followed by disable interrupt during single
stepping via clear 'SIE' bit of 'sstatus' in pt_regs.
3) Then kernel restore to the instruction slot contains two instructions,
one is original instruction at entry of sys_read, the other is 'ebreak'.
Here it trigger a 'Instruction page fault' exception (value at 'scause'
is '0xc'), if PF is not filled into PageTabe for that slot yet.
4) Again kernel trap into page fault exception handler, where it choose
different policy according to the state of running kprobe. Because
afte 2) the state is KPROBE_HIT_SS, so kernel reset the current kp
---truncated--- |
