| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mm: swap_cgroup: fix NULL deref in lookup_swap_cgroup_id on swapless host
lookup_swap_cgroup_id() passes swap_cgroup_ctrl[type].map to
__swap_cgroup_id_lookup() without checking that the type was ever
registered via swap_cgroup_swapon(). On a swapless host every ctrl->map
is NULL, so __swap_cgroup_id_lookup() dereferences NULL + a scaled
swp_offset().
Since commit bea67dcc5eea ("mm: attempt to batch free swap entries for
zap_pte_range()"), zap_pte_range() -> swap_pte_batch() calls
lookup_swap_cgroup_id() on any non-present, non-none PTE that decodes as a
real swap entry, without first validating it against swap_info[]. A
single PTE corrupted into a type-0 swap entry takes the host down at
process exit.
We hit this in production on a swapless 6.12.58 host: ~1s of
"get_swap_device: Bad swap file entry 3f800204222bb" (do_swap_page() being
correctly defensive about the same entry) followed by
BUG: unable to handle page fault for address: 000003f800204220
RIP: 0010:lookup_swap_cgroup_id+0x2b/0x60
Call Trace:
swap_pte_batch+0xbf/0x230
zap_pte_range+0x4c8/0x780
unmap_page_range+0x190/0x3e0
exit_mmap+0xd9/0x3c0
do_exit+0x20c/0x4b0
syzbot has reported the identical stack.
The source of the PTE corruption is a separate bug; this change makes the
teardown path as robust as the fault path already is. Every other caller
of lookup_swap_cgroup_id() is downstream of a get_swap_device() that has
already validated the entry, so the new branch is cold. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: avoid NULL deref of conn in iso_conn_big_sync()
iso_conn_big_sync() drops the socket lock to call hci_get_route() and
then re-acquires it, but dereferences iso_pi(sk)->conn->hcon afterwards
without re-checking that conn is still valid.
While the lock is dropped, the connection can be torn down under the
same socket lock: iso_disconn_cfm() -> iso_conn_del() -> iso_chan_del()
sets iso_pi(sk)->conn to NULL (and the broadcast teardown path can also
clear conn->hcon on its own). When iso_conn_big_sync() re-acquires the
lock and reads conn->hcon, conn may be NULL, causing a NULL pointer
dereference (hcon is the first member of struct iso_conn).
This path is reached from iso_sock_recvmsg() for a PA-sync broadcast
sink socket (BT_SK_DEFER_SETUP | BT_SK_PA_SYNC), so the dropped-lock
window can race with connection teardown driven by controller events.
Re-validate iso_pi(sk)->conn and its hcon after re-acquiring the socket
lock and bail out if the connection went away, as already done in the
sibling iso_sock_rebind_bc(). |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: Fix next buffer leak in receive_encrypted_standard()
receive_encrypted_standard() allocates next_buffer before checking
whether the number of compound PDUs already reached MAX_COMPOUND. If
the limit check fails, the function returns immediately and the newly
allocated next_buffer is not assigned to server->smallbuf/server->bigbuf,
making it leaked.
Move the MAX_COMPOUND check before allocating next_buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
proc: protect ptrace_may_access() with exec_update_lock (part 1)
Fix the easy cases where procfs currently calls ptrace_may_access() without
exec_update_lock protection, where the fix is to simply add the extra lock
or use mm_access():
- do_task_stat(): grab exec_update_lock
- proc_pid_wchan(): grab exec_update_lock
- proc_map_files_lookup(): use mm_access() instead of get_task_mm()
- proc_map_files_readdir(): use mm_access() instead of get_task_mm()
- proc_ns_get_link(): grab exec_update_lock
- proc_ns_readlink(): grab exec_update_lock |
| In the Linux kernel, the following vulnerability has been resolved:
posix-cpu-timers: Fix pid refcount leak in do_cpu_nanosleep() error path
In do_cpu_nanosleep(), posix_cpu_timer_create() takes a pid reference
via get_pid() and stores it in timer.it.cpu.pid. If the subsequent
posix_cpu_timer_set() call fails, the function returns immediately
without calling posix_cpu_timer_del() to release the pid reference,
causing a leak.
Fix it by calling posix_cpu_timer_del() before the unlock-and-return
on the error path, consistent with the other exit paths in the same
function. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: lg-g15: cancel pending work on remove to fix a use-after-free
lg_g15_data is allocated with devm and holds a work item. The report
handlers schedule that work straight from device input.
lg_g15_event() and lg_g15_v2_event() do it on the backlight cycle key,
and lg_g510_leds_event() does it too. The worker dereferences the
lg_g15_data back through container_of.
The driver had no remove callback and never cancelled the work. So if a
report scheduled the work and the keyboard was then unplugged, devres
freed lg_g15_data while the work was still pending or running, and the
worker touched freed memory. This is a use-after-free. It is reachable
as a race on device unplug.
Add a remove callback that cancels the work before devres frees the
state. g15->work is only initialized for the models that schedule it
(G15, G15 v2, G510). The G13 and Z-10 leave it zeroed, so guard the
cancel on g15->work.func to avoid cancelling a work that was never set
up. The g15 NULL test mirrors the one already in lg_g15_raw_event(). |
| In the Linux kernel, the following vulnerability has been resolved:
hfs/hfsplus: zero-initialize buffer in hfs_bnode_read
hfs_bnode_read() can return early without writing to the output buffer
when is_bnode_offset_valid() fails or when check_and_correct_requested_
length() corrects the length to zero. Callers such as hfs_bnode_read_
u16() and hfs_bnode_read_u8() pass stack-allocated buffers and use the
result unconditionally, leading to KMSAN uninit-value reports.
Rather than initializing at each individual call site, zero the buffer
at the start of hfs_bnode_read() before any validation checks. This
ensures all callers in both hfs and hfsplus get a deterministic zero
value regardless of which early-return path is taken. |
| In the Linux kernel, the following vulnerability has been resolved:
media: mtk-jpeg: cancel workqueue on release for supported platforms only
Since a recent fix the mtk_jpeg_release function cancels any pending
or running work present in the driver workqueue using
cancel_work_sync function.
Currently, only the multicore based variants use this workqueue and they
have the jpeg_worker platform data field initialized with a workqueue
callback function. For the others, this field value remain NULL by
default.
The cancel_work_sync function is unconditionally called in
mtk_jpeg_release function, even for the variants that do not use the
workqueue. This call generates a WARN_ON print in __flush_work because
the workqueue callback function presence check fails in __flush_work
function (used by cancel_work_sync).
So, to avoid these warnings, call cancel_work_sync only if a workqueue
callback is defined in platform data. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix exchmaps reservation limit check
xfs_exchmaps_estimate_overhead() adds the bmbt and rmapbt
overhead to a local resblks variable, but the final UINT_MAX
check still tests req->resblks. That is the reservation value
from before the overhead was added.
The computed value is stored back in req->resblks and later passed
to xfs_trans_alloc(), whose block reservation argument is unsigned
int. Check the computed reservation so the existing limit applies
to the value that will be used. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix memory leak in xfs_dqinode_metadir_create()
If xfs_metadir_create() fails in xfs_dqinode_metadir_create(), the current
code returns directly, leaking the allocated update and transaction state.
If the subsequent commit fails, the caller-owned inode reference is left
behind.
Fix this memory leak by routing the create failure path through
xfs_metadir_cancel(). For both create and commit failures, finish and
release any inode returned to the caller, mirroring the unwind pattern in
xfs_metadir_mkdir().
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1.1.
An x86_64 allyesconfig build showed no new warnings. Runtime validation
used kprobe fault injection during `mount -o uquota` on a metadir XFS
image. Injecting xfs_metadir_create() reproduced the old active-update path
that left mount stuck later in mount setup; after this change, the same
injection reported cancel_hits=1 and irele_hits=1. Injecting
xfs_metadir_commit() exercised the old inode-reference leak path; after
this change, it reported irele_hits=1. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Keep dynamic inner array lookups nullable
An ARRAY_OF_MAPS can use an array created with BPF_F_INNER_MAP as its
inner map template. A concrete inner array with a different max_entries
value can then replace the template.
After a successful outer map lookup, the verifier represents the
resulting map pointer using the inner map template. Const-key lookup
nullness elision consequently uses the template max_entries even though
the runtime helper uses the concrete inner map max_entries.
Do not elide lookup result nullness for maps marked with BPF_F_INNER_MAP,
because the template max_entries does not prove that the key is in bounds
for the concrete runtime map. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Allow LPM map access from sleepable BPF programs
trie_lookup_elem() annotates its rcu_dereference_check() walks with
only rcu_read_lock_bh_held(). Because rcu_dereference_check(p, c)
resolves to "c || rcu_read_lock_held()", this passes for XDP/NAPI and
classic RCU readers but fails for sleepable BPF programs, which enter
via __bpf_prog_enter_sleepable() and hold only rcu_read_lock_trace().
trie_update_elem() and trie_delete_elem() have the same problem in a
different form: they walk the trie with plain rcu_dereference(), which
asserts rcu_read_lock_held() unconditionally. Both are reachable from
sleepable BPF programs via the bpf_map_update_elem / bpf_map_delete_elem
helpers, and from the syscall path under classic rcu_read_lock(). In
the writer paths the trie is actually protected by trie->lock (an
rqspinlock taken across the walk); we never relied on the RCU read-side
lock to keep nodes alive there.
A sleepable LSM hook that ends up touching an LPM trie therefore
triggers lockdep on debug kernels:
=============================
WARNING: suspicious RCU usage
7.1.0-... Tainted: G E
-----------------------------
kernel/bpf/lpm_trie.c:249 suspicious rcu_dereference_check() usage!
1 lock held by net_tests/540:
#0: (rcu_tasks_trace_srcu_struct){....}-{0:0},
at: __bpf_prog_enter_sleepable+0x26/0x280
Call Trace:
dump_stack_lvl
lockdep_rcu_suspicious
trie_lookup_elem
bpf_prog_..._enforce_security_socket_connect
bpf_trampoline_...
security_socket_connect
__sys_connect
do_syscall_64
This is lockdep-only -- no UAF, since Tasks Trace RCU does serialize
against the trie's reclaim path -- but it spams the console once per
distinct callsite on every debug kernel running a sleepable BPF LSM
that touches an LPM trie, which is increasingly common.
For the lookup path, switch the rcu_dereference_check() annotation
from rcu_read_lock_bh_held() to bpf_rcu_lock_held(), which accepts all
three contexts (classic, BH, Tasks Trace). Other map types already
follow this convention.
For trie_update_elem() and trie_delete_elem(), annotate the walks as
rcu_dereference_protected(*p, 1) -- matching trie_free() in the same
file -- since trie->lock is held across the walk. rqspinlock has no
lockdep_map, so the predicate degenerates to '1' rather than
lockdep_is_held(&trie->lock); the protection is real but not
machine-verifiable. trie_get_next_key() also uses bare
rcu_dereference() but is reachable only from the BPF syscall, which
holds classic rcu_read_lock() before dispatching, so it is left
untouched. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: kalmia: bound RX frame length in kalmia_rx_fixup()
kalmia_rx_fixup() computes usb_packet_length = skb->len - (2 *
KALMIA_HEADER_LENGTH) as a u16, guarded only by a pre-loop check that
skb->len is at least KALMIA_HEADER_LENGTH, which is 6. A device can
deliver a short bulk-IN frame with skb->len in the 6 to 11 range, or
leave a short trailing remainder on a later loop iteration. Either case
underflows usb_packet_length to about 65530.
That bypasses the usb_packet_length < ether_packet_length truncation path.
The device-supplied ether_packet_length, a le16 up to 65535 read from
header_start[2], then drives a memcmp() and the following skb_trim() and
skb_pull() past the end of the rx buffer. The rx buffer is hard_mtu * 10,
which is 14000 bytes. That is an out of bounds read.
Require both the start and end framing headers to be present before
subtracting them, on every loop iteration. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: cdnsp: fix stream context array leak in cdnsp_alloc_stream_info()
cdnsp_alloc_stream_info() allocates stream_info->stream_ctx_array with
cdnsp_alloc_stream_ctx(). If a later stream ring allocation or stream
mapping update fails, the error path frees the allocated stream rings
and stream_rings array, but leaves stream_ctx_array allocated.
Free the stream context array before falling through to the stream_rings
cleanup path. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: fix dwc3_readl() and dwc3_writel() calls in dwc3_ulpi_setup()
The dwc3_ulpi_setup() calls the register read and write calls with
dwc3->regs when both these calls take the dwc3 structure directly.
Chnage these two calls to fix the following sparse warning, and
possibly a nasty bug in the dwc3_ulpi_setup() code:
drivers/usb/dwc3/core.c:796:45: warning: incorrect type in argument 1 (different address spaces)
drivers/usb/dwc3/core.c:796:45: expected struct dwc3 *dwc
drivers/usb/dwc3/core.c:796:45: got void [noderef] __iomem *regs
drivers/usb/dwc3/core.c:798:40: warning: incorrect type in argument 1 (different address spaces)
drivers/usb/dwc3/core.c:798:40: expected struct dwc3 *dwc
drivers/usb/dwc3/core.c:798:40: got void [noderef] __iomem *regs |
| In the Linux kernel, the following vulnerability has been resolved:
usb: free iso schedules on failed submit
EHCI and FOTG210 isochronous submits build an ehci_iso_sched before
linking the URB to the endpoint queue, and keep the staged schedule in
urb->hcpriv until iso_stream_schedule() and the link helpers consume it.
If the controller is no longer accessible, or usb_hcd_link_urb_to_ep()
fails, submit jumps to done_not_linked before that handoff happens and
leaks the staged schedule still attached to urb->hcpriv.
Free the staged schedule from done_not_linked when submit fails before
the URB is linked and clear urb->hcpriv after the free.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1.1.
An x86_64 allyesconfig build showed no new warnings. As we do not have an
EHCI host controller with a USB isochronous device to test with, no
runtime testing was able to be performed. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: composite: fix dead empty check in the USB_DT_OTG handler
The OTG branch of composite_setup() falls back to the first
configuration when none is selected:
if (cdev->config)
config = cdev->config;
else
config = list_first_entry(&cdev->configs,
struct usb_configuration, list);
if (!config)
goto done;
...
memcpy(req->buf, config->descriptors[0], value);
list_first_entry() never returns NULL. On an empty list it returns
container_of() of the list head. So the "if (!config)" check is dead.
When cdev->configs is empty, config points at the head inside struct
usb_composite_dev. config->descriptors[0] reads whatever sits at that
offset. The memcpy copies up to w_length bytes of it into the response
buffer.
cdev->configs can be empty in two cases. One is a teardown race on
gadget unbind with a control transfer in flight. The other is a driver
that sets is_otg before it adds a config. A reproducer that holds
cdev->configs empty triggers a KASAN fault in this branch.
Use list_first_entry_or_null() so the existing check does its job. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_printer: take kref only for successful open
printer_open() returns -EBUSY when the character device is already
open, but it increments dev->kref regardless of the return value. VFS
does not call ->release() for a failed open, so every rejected second
open permanently leaks one reference.
Move kref_get() into the successful-open branch. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: ldusb: fix use-after-free on disconnect race
mutex_unlock() may access the mutex structure after releasing the lock
and therefore cannot be used to manage lifetime of objects directly
(unlike spinlocks and refcounts). [1][2]
Use a kref to release the driver data to avoid use-after-free in
mutex_unlock() when release() races with disconnect().
[1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is
non-atomic")
[2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most
other sleeping locks, can still use the lock object
after it's unlocked") |
| In the Linux kernel, the following vulnerability has been resolved:
USB: legousbtower: fix use-after-free on disconnect race
mutex_unlock() may access the mutex structure after releasing the lock
and therefore cannot be used to manage lifetime of objects directly
(unlike spinlocks and refcounts). [1][2]
Use a kref to release the driver data to avoid use-after-free in
mutex_unlock() when release() races with disconnect().
[1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is
non-atomic")
[2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most
other sleeping locks, can still use the lock object
after it's unlocked") |
