Filtered by vendor Redhat
Subscriptions
Filtered by product Enterprise Linux
Subscriptions
Total
13573 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2021-47548 | 1 Redhat | 5 Enterprise Linux, Rhel Aus, Rhel E4s and 2 more | 2024-08-04 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ethernet: hisilicon: hns: hns_dsaf_misc: fix a possible array overflow in hns_dsaf_ge_srst_by_port() The if statement: if (port >= DSAF_GE_NUM) return; limits the value of port less than DSAF_GE_NUM (i.e., 8). However, if the value of port is 6 or 7, an array overflow could occur: port_rst_off = dsaf_dev->mac_cb[port]->port_rst_off; because the length of dsaf_dev->mac_cb is DSAF_MAX_PORT_NUM (i.e., 6). To fix this possible array overflow, we first check port and if it is greater than or equal to DSAF_MAX_PORT_NUM, the function returns. | ||||
| CVE-2021-47527 | 1 Redhat | 1 Enterprise Linux | 2024-08-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: core: fix transmit-buffer reset and memleak Commit 761ed4a94582 ("tty: serial_core: convert uart_close to use tty_port_close") converted serial core to use tty_port_close() but failed to notice that the transmit buffer still needs to be freed on final close. Not freeing the transmit buffer means that the buffer is no longer cleared on next open so that any ioctl() waiting for the buffer to drain might wait indefinitely (e.g. on termios changes) or that stale data can end up being transmitted in case tx is restarted. Furthermore, the buffer of any port that has been opened would leak on driver unbind. Note that the port lock is held when clearing the buffer pointer due to the ldisc race worked around by commit a5ba1d95e46e ("uart: fix race between uart_put_char() and uart_shutdown()"). Also note that the tty-port shutdown() callback is not called for console ports so it is not strictly necessary to free the buffer page after releasing the lock (cf. d72402145ace ("tty/serial: do not free trasnmit buffer page under port lock")). | ||||
| CVE-2021-47393 | 1 Redhat | 4 Enterprise Linux, Rhel Aus, Rhel E4s and 1 more | 2024-08-04 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (mlxreg-fan) Return non-zero value when fan current state is enforced from sysfs Fan speed minimum can be enforced from sysfs. For example, setting current fan speed to 20 is used to enforce fan speed to be at 100% speed, 19 - to be not below 90% speed, etcetera. This feature provides ability to limit fan speed according to some system wise considerations, like absence of some replaceable units or high system ambient temperature. Request for changing fan minimum speed is configuration request and can be set only through 'sysfs' write procedure. In this situation value of argument 'state' is above nominal fan speed maximum. Return non-zero code in this case to avoid thermal_cooling_device_stats_update() call, because in this case statistics update violates thermal statistics table range. The issues is observed in case kernel is configured with option CONFIG_THERMAL_STATISTICS. Here is the trace from KASAN: [ 159.506659] BUG: KASAN: slab-out-of-bounds in thermal_cooling_device_stats_update+0x7d/0xb0 [ 159.516016] Read of size 4 at addr ffff888116163840 by task hw-management.s/7444 [ 159.545625] Call Trace: [ 159.548366] dump_stack+0x92/0xc1 [ 159.552084] ? thermal_cooling_device_stats_update+0x7d/0xb0 [ 159.635869] thermal_zone_device_update+0x345/0x780 [ 159.688711] thermal_zone_device_set_mode+0x7d/0xc0 [ 159.694174] mlxsw_thermal_modules_init+0x48f/0x590 [mlxsw_core] [ 159.700972] ? mlxsw_thermal_set_cur_state+0x5a0/0x5a0 [mlxsw_core] [ 159.731827] mlxsw_thermal_init+0x763/0x880 [mlxsw_core] [ 160.070233] RIP: 0033:0x7fd995909970 [ 160.074239] Code: 73 01 c3 48 8b 0d 28 d5 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 99 2d 2c 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff .. [ 160.095242] RSP: 002b:00007fff54f5d938 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 160.103722] RAX: ffffffffffffffda RBX: 0000000000000013 RCX: 00007fd995909970 [ 160.111710] RDX: 0000000000000013 RSI: 0000000001906008 RDI: 0000000000000001 [ 160.119699] RBP: 0000000001906008 R08: 00007fd995bc9760 R09: 00007fd996210700 [ 160.127687] R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000013 [ 160.135673] R13: 0000000000000001 R14: 00007fd995bc8600 R15: 0000000000000013 [ 160.143671] [ 160.145338] Allocated by task 2924: [ 160.149242] kasan_save_stack+0x19/0x40 [ 160.153541] __kasan_kmalloc+0x7f/0xa0 [ 160.157743] __kmalloc+0x1a2/0x2b0 [ 160.161552] thermal_cooling_device_setup_sysfs+0xf9/0x1a0 [ 160.167687] __thermal_cooling_device_register+0x1b5/0x500 [ 160.173833] devm_thermal_of_cooling_device_register+0x60/0xa0 [ 160.180356] mlxreg_fan_probe+0x474/0x5e0 [mlxreg_fan] [ 160.248140] [ 160.249807] The buggy address belongs to the object at ffff888116163400 [ 160.249807] which belongs to the cache kmalloc-1k of size 1024 [ 160.263814] The buggy address is located 64 bytes to the right of [ 160.263814] 1024-byte region [ffff888116163400, ffff888116163800) [ 160.277536] The buggy address belongs to the page: [ 160.282898] page:0000000012275840 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888116167000 pfn:0x116160 [ 160.294872] head:0000000012275840 order:3 compound_mapcount:0 compound_pincount:0 [ 160.303251] flags: 0x200000000010200(slab|head|node=0|zone=2) [ 160.309694] raw: 0200000000010200 ffffea00046f7208 ffffea0004928208 ffff88810004dbc0 [ 160.318367] raw: ffff888116167000 00000000000a0006 00000001ffffffff 0000000000000000 [ 160.327033] page dumped because: kasan: bad access detected [ 160.333270] [ 160.334937] Memory state around the buggy address: [ 160.356469] >ffff888116163800: fc .. | ||||
| CVE-2021-47385 | 1 Redhat | 5 Enterprise Linux, Rhel Aus, Rhel E4s and 2 more | 2024-08-04 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (w83792d) Fix NULL pointer dereference by removing unnecessary structure field If driver read val value sufficient for (val & 0x08) && (!(val & 0x80)) && ((val & 0x7) == ((val >> 4) & 0x7)) from device then Null pointer dereference occurs. (It is possible if tmp = 0b0xyz1xyz, where same literals mean same numbers) Also lm75[] does not serve a purpose anymore after switching to devm_i2c_new_dummy_device() in w83791d_detect_subclients(). The patch fixes possible NULL pointer dereference by removing lm75[]. Found by Linux Driver Verification project (linuxtesting.org). [groeck: Dropped unnecessary continuation lines, fixed multipline alignment] | ||||
| CVE-2021-47497 | 1 Redhat | 1 Enterprise Linux | 2024-08-04 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvmem: Fix shift-out-of-bound (UBSAN) with byte size cells If a cell has 'nbits' equal to a multiple of BITS_PER_BYTE the logic *p &= GENMASK((cell->nbits%BITS_PER_BYTE) - 1, 0); will become undefined behavior because nbits modulo BITS_PER_BYTE is 0, and we subtract one from that making a large number that is then shifted more than the number of bits that fit into an unsigned long. UBSAN reports this problem: UBSAN: shift-out-of-bounds in drivers/nvmem/core.c:1386:8 shift exponent 64 is too large for 64-bit type 'unsigned long' CPU: 6 PID: 7 Comm: kworker/u16:0 Not tainted 5.15.0-rc3+ #9 Hardware name: Google Lazor (rev3+) with KB Backlight (DT) Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace+0x0/0x170 show_stack+0x24/0x30 dump_stack_lvl+0x64/0x7c dump_stack+0x18/0x38 ubsan_epilogue+0x10/0x54 __ubsan_handle_shift_out_of_bounds+0x180/0x194 __nvmem_cell_read+0x1ec/0x21c nvmem_cell_read+0x58/0x94 nvmem_cell_read_variable_common+0x4c/0xb0 nvmem_cell_read_variable_le_u32+0x40/0x100 a6xx_gpu_init+0x170/0x2f4 adreno_bind+0x174/0x284 component_bind_all+0xf0/0x264 msm_drm_bind+0x1d8/0x7a0 try_to_bring_up_master+0x164/0x1ac __component_add+0xbc/0x13c component_add+0x20/0x2c dp_display_probe+0x340/0x384 platform_probe+0xc0/0x100 really_probe+0x110/0x304 __driver_probe_device+0xb8/0x120 driver_probe_device+0x4c/0xfc __device_attach_driver+0xb0/0x128 bus_for_each_drv+0x90/0xdc __device_attach+0xc8/0x174 device_initial_probe+0x20/0x2c bus_probe_device+0x40/0xa4 deferred_probe_work_func+0x7c/0xb8 process_one_work+0x128/0x21c process_scheduled_works+0x40/0x54 worker_thread+0x1ec/0x2a8 kthread+0x138/0x158 ret_from_fork+0x10/0x20 Fix it by making sure there are any bits to mask out. | ||||
| CVE-2021-47491 | 1 Redhat | 1 Enterprise Linux | 2024-08-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm: khugepaged: skip huge page collapse for special files The read-only THP for filesystems will collapse THP for files opened readonly and mapped with VM_EXEC. The intended usecase is to avoid TLB misses for large text segments. But it doesn't restrict the file types so a THP could be collapsed for a non-regular file, for example, block device, if it is opened readonly and mapped with EXEC permission. This may cause bugs, like [1] and [2]. This is definitely not the intended usecase, so just collapse THP for regular files in order to close the attack surface. [shy828301@gmail.com: fix vm_file check [3]] | ||||
| CVE-2021-47383 | 1 Redhat | 2 Enterprise Linux, Rhel Eus | 2024-08-04 | 6.6 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tty: Fix out-of-bound vmalloc access in imageblit This issue happens when a userspace program does an ioctl FBIOPUT_VSCREENINFO passing the fb_var_screeninfo struct containing only the fields xres, yres, and bits_per_pixel with values. If this struct is the same as the previous ioctl, the vc_resize() detects it and doesn't call the resize_screen(), leaving the fb_var_screeninfo incomplete. And this leads to the updatescrollmode() calculates a wrong value to fbcon_display->vrows, which makes the real_y() return a wrong value of y, and that value, eventually, causes the imageblit to access an out-of-bound address value. To solve this issue I made the resize_screen() be called even if the screen does not need any resizing, so it will "fix and fill" the fb_var_screeninfo independently. | ||||
| CVE-2021-47461 | 1 Redhat | 4 Enterprise Linux, Rhel Aus, Rhel E4s and 1 more | 2024-08-04 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: userfaultfd: fix a race between writeprotect and exit_mmap() A race is possible when a process exits, its VMAs are removed by exit_mmap() and at the same time userfaultfd_writeprotect() is called. The race was detected by KASAN on a development kernel, but it appears to be possible on vanilla kernels as well. Use mmget_not_zero() to prevent the race as done in other userfaultfd operations. | ||||
| CVE-2021-47400 | 1 Redhat | 2 Enterprise Linux, Rhel Eus | 2024-08-04 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: hns3: do not allow call hns3_nic_net_open repeatedly hns3_nic_net_open() is not allowed to called repeatly, but there is no checking for this. When doing device reset and setup tc concurrently, there is a small oppotunity to call hns3_nic_net_open repeatedly, and cause kernel bug by calling napi_enable twice. The calltrace information is like below: [ 3078.222780] ------------[ cut here ]------------ [ 3078.230255] kernel BUG at net/core/dev.c:6991! [ 3078.236224] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 3078.243431] Modules linked in: hns3 hclgevf hclge hnae3 vfio_iommu_type1 vfio_pci vfio_virqfd vfio pv680_mii(O) [ 3078.258880] CPU: 0 PID: 295 Comm: kworker/u8:5 Tainted: G O 5.14.0-rc4+ #1 [ 3078.269102] Hardware name: , BIOS KpxxxFPGA 1P B600 V181 08/12/2021 [ 3078.276801] Workqueue: hclge hclge_service_task [hclge] [ 3078.288774] pstate: 60400009 (nZCv daif +PAN -UAO -TCO BTYPE=--) [ 3078.296168] pc : napi_enable+0x80/0x84 tc qdisc sho[w 3d0e7v8 .e3t0h218 79] lr : hns3_nic_net_open+0x138/0x510 [hns3] [ 3078.314771] sp : ffff8000108abb20 [ 3078.319099] x29: ffff8000108abb20 x28: 0000000000000000 x27: ffff0820a8490300 [ 3078.329121] x26: 0000000000000001 x25: ffff08209cfc6200 x24: 0000000000000000 [ 3078.339044] x23: ffff0820a8490300 x22: ffff08209cd76000 x21: ffff0820abfe3880 [ 3078.349018] x20: 0000000000000000 x19: ffff08209cd76900 x18: 0000000000000000 [ 3078.358620] x17: 0000000000000000 x16: ffffc816e1727a50 x15: 0000ffff8f4ff930 [ 3078.368895] x14: 0000000000000000 x13: 0000000000000000 x12: 0000259e9dbeb6b4 [ 3078.377987] x11: 0096a8f7e764eb40 x10: 634615ad28d3eab5 x9 : ffffc816ad8885b8 [ 3078.387091] x8 : ffff08209cfc6fb8 x7 : ffff0820ac0da058 x6 : ffff0820a8490344 [ 3078.396356] x5 : 0000000000000140 x4 : 0000000000000003 x3 : ffff08209cd76938 [ 3078.405365] x2 : 0000000000000000 x1 : 0000000000000010 x0 : ffff0820abfe38a0 [ 3078.414657] Call trace: [ 3078.418517] napi_enable+0x80/0x84 [ 3078.424626] hns3_reset_notify_up_enet+0x78/0xd0 [hns3] [ 3078.433469] hns3_reset_notify+0x64/0x80 [hns3] [ 3078.441430] hclge_notify_client+0x68/0xb0 [hclge] [ 3078.450511] hclge_reset_rebuild+0x524/0x884 [hclge] [ 3078.458879] hclge_reset_service_task+0x3c4/0x680 [hclge] [ 3078.467470] hclge_service_task+0xb0/0xb54 [hclge] [ 3078.475675] process_one_work+0x1dc/0x48c [ 3078.481888] worker_thread+0x15c/0x464 [ 3078.487104] kthread+0x160/0x170 [ 3078.492479] ret_from_fork+0x10/0x18 [ 3078.498785] Code: c8027c81 35ffffa2 d50323bf d65f03c0 (d4210000) [ 3078.506889] ---[ end trace 8ebe0340a1b0fb44 ]--- Once hns3_nic_net_open() is excute success, the flag HNS3_NIC_STATE_DOWN will be cleared. So add checking for this flag, directly return when HNS3_NIC_STATE_DOWN is no set. | ||||
| CVE-2021-47456 | 1 Redhat | 1 Enterprise Linux | 2024-08-04 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: can: peak_pci: peak_pci_remove(): fix UAF When remove the module peek_pci, referencing 'chan' again after releasing 'dev' will cause UAF. Fix this by releasing 'dev' later. The following log reveals it: [ 35.961814 ] BUG: KASAN: use-after-free in peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.963414 ] Read of size 8 at addr ffff888136998ee8 by task modprobe/5537 [ 35.965513 ] Call Trace: [ 35.965718 ] dump_stack_lvl+0xa8/0xd1 [ 35.966028 ] print_address_description+0x87/0x3b0 [ 35.966420 ] kasan_report+0x172/0x1c0 [ 35.966725 ] ? peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.967137 ] ? trace_irq_enable_rcuidle+0x10/0x170 [ 35.967529 ] ? peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.967945 ] __asan_report_load8_noabort+0x14/0x20 [ 35.968346 ] peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.968752 ] pci_device_remove+0xa9/0x250 | ||||
| CVE-2021-47412 | 1 Redhat | 1 Enterprise Linux | 2024-08-04 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block: don't call rq_qos_ops->done_bio if the bio isn't tracked rq_qos framework is only applied on request based driver, so: 1) rq_qos_done_bio() needn't to be called for bio based driver 2) rq_qos_done_bio() needn't to be called for bio which isn't tracked, such as bios ended from error handling code. Especially in bio_endio(): 1) request queue is referred via bio->bi_bdev->bd_disk->queue, which may be gone since request queue refcount may not be held in above two cases 2) q->rq_qos may be freed in blk_cleanup_queue() when calling into __rq_qos_done_bio() Fix the potential kernel panic by not calling rq_qos_ops->done_bio if the bio isn't tracked. This way is safe because both ioc_rqos_done_bio() and blkcg_iolatency_done_bio() are nop if the bio isn't tracked. | ||||
| CVE-2021-47455 | 1 Redhat | 1 Enterprise Linux | 2024-08-04 | 5.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ptp: Fix possible memory leak in ptp_clock_register() I got memory leak as follows when doing fault injection test: unreferenced object 0xffff88800906c618 (size 8): comm "i2c-idt82p33931", pid 4421, jiffies 4294948083 (age 13.188s) hex dump (first 8 bytes): 70 74 70 30 00 00 00 00 ptp0.... backtrace: [<00000000312ed458>] __kmalloc_track_caller+0x19f/0x3a0 [<0000000079f6e2ff>] kvasprintf+0xb5/0x150 [<0000000026aae54f>] kvasprintf_const+0x60/0x190 [<00000000f323a5f7>] kobject_set_name_vargs+0x56/0x150 [<000000004e35abdd>] dev_set_name+0xc0/0x100 [<00000000f20cfe25>] ptp_clock_register+0x9f4/0xd30 [ptp] [<000000008bb9f0de>] idt82p33_probe.cold+0x8b6/0x1561 [ptp_idt82p33] When posix_clock_register() returns an error, the name allocated in dev_set_name() will be leaked, the put_device() should be used to give up the device reference, then the name will be freed in kobject_cleanup() and other memory will be freed in ptp_clock_release(). | ||||
| CVE-2021-47384 | 1 Redhat | 2 Enterprise Linux, Rhel Eus | 2024-08-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (w83793) Fix NULL pointer dereference by removing unnecessary structure field If driver read tmp value sufficient for (tmp & 0x08) && (!(tmp & 0x80)) && ((tmp & 0x7) == ((tmp >> 4) & 0x7)) from device then Null pointer dereference occurs. (It is possible if tmp = 0b0xyz1xyz, where same literals mean same numbers) Also lm75[] does not serve a purpose anymore after switching to devm_i2c_new_dummy_device() in w83791d_detect_subclients(). The patch fixes possible NULL pointer dereference by removing lm75[]. Found by Linux Driver Verification project (linuxtesting.org). [groeck: Dropped unnecessary continuation lines, fixed multi-line alignments] | ||||
| CVE-2021-47432 | 1 Redhat | 1 Enterprise Linux | 2024-08-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: lib/generic-radix-tree.c: Don't overflow in peek() When we started spreading new inode numbers throughout most of the 64 bit inode space, that triggered some corner case bugs, in particular some integer overflows related to the radix tree code. Oops. | ||||
| CVE-2021-47408 | 1 Redhat | 1 Enterprise Linux | 2024-08-04 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: serialize hash resizes and cleanups Syzbot was able to trigger the following warning [1] No repro found by syzbot yet but I was able to trigger similar issue by having 2 scripts running in parallel, changing conntrack hash sizes, and: for j in `seq 1 1000` ; do unshare -n /bin/true >/dev/null ; done It would take more than 5 minutes for net_namespace structures to be cleaned up. This is because nf_ct_iterate_cleanup() has to restart everytime a resize happened. By adding a mutex, we can serialize hash resizes and cleanups and also make get_next_corpse() faster by skipping over empty buckets. Even without resizes in the picture, this patch considerably speeds up network namespace dismantles. [1] INFO: task syz-executor.0:8312 can't die for more than 144 seconds. task:syz-executor.0 state:R running task stack:25672 pid: 8312 ppid: 6573 flags:0x00004006 Call Trace: context_switch kernel/sched/core.c:4955 [inline] __schedule+0x940/0x26f0 kernel/sched/core.c:6236 preempt_schedule_common+0x45/0xc0 kernel/sched/core.c:6408 preempt_schedule_thunk+0x16/0x18 arch/x86/entry/thunk_64.S:35 __local_bh_enable_ip+0x109/0x120 kernel/softirq.c:390 local_bh_enable include/linux/bottom_half.h:32 [inline] get_next_corpse net/netfilter/nf_conntrack_core.c:2252 [inline] nf_ct_iterate_cleanup+0x15a/0x450 net/netfilter/nf_conntrack_core.c:2275 nf_conntrack_cleanup_net_list+0x14c/0x4f0 net/netfilter/nf_conntrack_core.c:2469 ops_exit_list+0x10d/0x160 net/core/net_namespace.c:171 setup_net+0x639/0xa30 net/core/net_namespace.c:349 copy_net_ns+0x319/0x760 net/core/net_namespace.c:470 create_new_namespaces+0x3f6/0xb20 kernel/nsproxy.c:110 unshare_nsproxy_namespaces+0xc1/0x1f0 kernel/nsproxy.c:226 ksys_unshare+0x445/0x920 kernel/fork.c:3128 __do_sys_unshare kernel/fork.c:3202 [inline] __se_sys_unshare kernel/fork.c:3200 [inline] __x64_sys_unshare+0x2d/0x40 kernel/fork.c:3200 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f63da68e739 RSP: 002b:00007f63d7c05188 EFLAGS: 00000246 ORIG_RAX: 0000000000000110 RAX: ffffffffffffffda RBX: 00007f63da792f80 RCX: 00007f63da68e739 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000040000000 RBP: 00007f63da6e8cc4 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f63da792f80 R13: 00007fff50b75d3f R14: 00007f63d7c05300 R15: 0000000000022000 Showing all locks held in the system: 1 lock held by khungtaskd/27: #0: ffffffff8b980020 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x53/0x260 kernel/locking/lockdep.c:6446 2 locks held by kworker/u4:2/153: #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: arch_atomic64_set arch/x86/include/asm/atomic64_64.h:34 [inline] #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: arch_atomic_long_set include/linux/atomic/atomic-long.h:41 [inline] #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: atomic_long_set include/linux/atomic/atomic-instrumented.h:1198 [inline] #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: set_work_data kernel/workqueue.c:634 [inline] #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: set_work_pool_and_clear_pending kernel/workqueue.c:661 [inline] #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x896/0x1690 kernel/workqueue.c:2268 #1: ffffc9000140fdb0 ((kfence_timer).work){+.+.}-{0:0}, at: process_one_work+0x8ca/0x1690 kernel/workqueue.c:2272 1 lock held by systemd-udevd/2970: 1 lock held by in:imklog/6258: #0: ffff88807f970ff0 (&f->f_pos_lock){+.+.}-{3:3}, at: __fdget_pos+0xe9/0x100 fs/file.c:990 3 locks held by kworker/1:6/8158: 1 lock held by syz-executor.0/8312: 2 locks held by kworker/u4:13/9320: 1 lock held by ---truncated--- | ||||
| CVE-2021-47386 | 1 Redhat | 1 Enterprise Linux | 2024-08-04 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (w83791d) Fix NULL pointer dereference by removing unnecessary structure field If driver read val value sufficient for (val & 0x08) && (!(val & 0x80)) && ((val & 0x7) == ((val >> 4) & 0x7)) from device then Null pointer dereference occurs. (It is possible if tmp = 0b0xyz1xyz, where same literals mean same numbers) Also lm75[] does not serve a purpose anymore after switching to devm_i2c_new_dummy_device() in w83791d_detect_subclients(). The patch fixes possible NULL pointer dereference by removing lm75[]. Found by Linux Driver Verification project (linuxtesting.org). [groeck: Dropped unnecessary continuation lines, fixed multi-line alignment] | ||||
| CVE-2021-47338 | 1 Redhat | 1 Enterprise Linux | 2024-08-04 | 5.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fbmem: Do not delete the mode that is still in use The execution of fb_delete_videomode() is not based on the result of the previous fbcon_mode_deleted(). As a result, the mode is directly deleted, regardless of whether it is still in use, which may cause UAF. ================================================================== BUG: KASAN: use-after-free in fb_mode_is_equal+0x36e/0x5e0 \ drivers/video/fbdev/core/modedb.c:924 Read of size 4 at addr ffff88807e0ddb1c by task syz-executor.0/18962 CPU: 2 PID: 18962 Comm: syz-executor.0 Not tainted 5.10.45-rc1+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ... Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x137/0x1be lib/dump_stack.c:118 print_address_description+0x6c/0x640 mm/kasan/report.c:385 __kasan_report mm/kasan/report.c:545 [inline] kasan_report+0x13d/0x1e0 mm/kasan/report.c:562 fb_mode_is_equal+0x36e/0x5e0 drivers/video/fbdev/core/modedb.c:924 fbcon_mode_deleted+0x16a/0x220 drivers/video/fbdev/core/fbcon.c:2746 fb_set_var+0x1e1/0xdb0 drivers/video/fbdev/core/fbmem.c:975 do_fb_ioctl+0x4d9/0x6e0 drivers/video/fbdev/core/fbmem.c:1108 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl+0xfb/0x170 fs/ioctl.c:739 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 18960: kasan_save_stack mm/kasan/common.c:48 [inline] kasan_set_track+0x3d/0x70 mm/kasan/common.c:56 kasan_set_free_info+0x17/0x30 mm/kasan/generic.c:355 __kasan_slab_free+0x108/0x140 mm/kasan/common.c:422 slab_free_hook mm/slub.c:1541 [inline] slab_free_freelist_hook+0xd6/0x1a0 mm/slub.c:1574 slab_free mm/slub.c:3139 [inline] kfree+0xca/0x3d0 mm/slub.c:4121 fb_delete_videomode+0x56a/0x820 drivers/video/fbdev/core/modedb.c:1104 fb_set_var+0x1f3/0xdb0 drivers/video/fbdev/core/fbmem.c:978 do_fb_ioctl+0x4d9/0x6e0 drivers/video/fbdev/core/fbmem.c:1108 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl+0xfb/0x170 fs/ioctl.c:739 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 | ||||
| CVE-2021-47356 | 2 Linux, Redhat | 6 Linux Kernel, Enterprise Linux, Rhel Aus and 3 more | 2024-08-04 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: mISDN: fix possible use-after-free in HFC_cleanup() This module's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself. | ||||
| CVE-2021-47353 | 1 Redhat | 1 Enterprise Linux | 2024-08-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: udf: Fix NULL pointer dereference in udf_symlink function In function udf_symlink, epos.bh is assigned with the value returned by udf_tgetblk. The function udf_tgetblk is defined in udf/misc.c and returns the value of sb_getblk function that could be NULL. Then, epos.bh is used without any check, causing a possible NULL pointer dereference when sb_getblk fails. This fix adds a check to validate the value of epos.bh. | ||||
| CVE-2021-47304 | 1 Redhat | 1 Enterprise Linux | 2024-08-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tcp: fix tcp_init_transfer() to not reset icsk_ca_initialized This commit fixes a bug (found by syzkaller) that could cause spurious double-initializations for congestion control modules, which could cause memory leaks or other problems for congestion control modules (like CDG) that allocate memory in their init functions. The buggy scenario constructed by syzkaller was something like: (1) create a TCP socket (2) initiate a TFO connect via sendto() (3) while socket is in TCP_SYN_SENT, call setsockopt(TCP_CONGESTION), which calls: tcp_set_congestion_control() -> tcp_reinit_congestion_control() -> tcp_init_congestion_control() (4) receive ACK, connection is established, call tcp_init_transfer(), set icsk_ca_initialized=0 (without first calling cc->release()), call tcp_init_congestion_control() again. Note that in this sequence tcp_init_congestion_control() is called twice without a cc->release() call in between. Thus, for CC modules that allocate memory in their init() function, e.g, CDG, a memory leak may occur. The syzkaller tool managed to find a reproducer that triggered such a leak in CDG. The bug was introduced when that commit 8919a9b31eb4 ("tcp: Only init congestion control if not initialized already") introduced icsk_ca_initialized and set icsk_ca_initialized to 0 in tcp_init_transfer(), missing the possibility for a sequence like the one above, where a process could call setsockopt(TCP_CONGESTION) in state TCP_SYN_SENT (i.e. after the connect() or TFO open sendmsg()), which would call tcp_init_congestion_control(). It did not intend to reset any initialization that the user had already explicitly made; it just missed the possibility of that particular sequence (which syzkaller managed to find). | ||||