| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mm: swap_cgroup: fix NULL deref in lookup_swap_cgroup_id on swapless host
lookup_swap_cgroup_id() passes swap_cgroup_ctrl[type].map to
__swap_cgroup_id_lookup() without checking that the type was ever
registered via swap_cgroup_swapon(). On a swapless host every ctrl->map
is NULL, so __swap_cgroup_id_lookup() dereferences NULL + a scaled
swp_offset().
Since commit bea67dcc5eea ("mm: attempt to batch free swap entries for
zap_pte_range()"), zap_pte_range() -> swap_pte_batch() calls
lookup_swap_cgroup_id() on any non-present, non-none PTE that decodes as a
real swap entry, without first validating it against swap_info[]. A
single PTE corrupted into a type-0 swap entry takes the host down at
process exit.
We hit this in production on a swapless 6.12.58 host: ~1s of
"get_swap_device: Bad swap file entry 3f800204222bb" (do_swap_page() being
correctly defensive about the same entry) followed by
BUG: unable to handle page fault for address: 000003f800204220
RIP: 0010:lookup_swap_cgroup_id+0x2b/0x60
Call Trace:
swap_pte_batch+0xbf/0x230
zap_pte_range+0x4c8/0x780
unmap_page_range+0x190/0x3e0
exit_mmap+0xd9/0x3c0
do_exit+0x20c/0x4b0
syzbot has reported the identical stack.
The source of the PTE corruption is a separate bug; this change makes the
teardown path as robust as the fault path already is. Every other caller
of lookup_swap_cgroup_id() is downstream of a get_swap_device() that has
already validated the entry, so the new branch is cold. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: avoid NULL deref of conn in iso_conn_big_sync()
iso_conn_big_sync() drops the socket lock to call hci_get_route() and
then re-acquires it, but dereferences iso_pi(sk)->conn->hcon afterwards
without re-checking that conn is still valid.
While the lock is dropped, the connection can be torn down under the
same socket lock: iso_disconn_cfm() -> iso_conn_del() -> iso_chan_del()
sets iso_pi(sk)->conn to NULL (and the broadcast teardown path can also
clear conn->hcon on its own). When iso_conn_big_sync() re-acquires the
lock and reads conn->hcon, conn may be NULL, causing a NULL pointer
dereference (hcon is the first member of struct iso_conn).
This path is reached from iso_sock_recvmsg() for a PA-sync broadcast
sink socket (BT_SK_DEFER_SETUP | BT_SK_PA_SYNC), so the dropped-lock
window can race with connection teardown driven by controller events.
Re-validate iso_pi(sk)->conn and its hcon after re-acquiring the socket
lock and bail out if the connection went away, as already done in the
sibling iso_sock_rebind_bc(). |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: Fix next buffer leak in receive_encrypted_standard()
receive_encrypted_standard() allocates next_buffer before checking
whether the number of compound PDUs already reached MAX_COMPOUND. If
the limit check fails, the function returns immediately and the newly
allocated next_buffer is not assigned to server->smallbuf/server->bigbuf,
making it leaked.
Move the MAX_COMPOUND check before allocating next_buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
proc: protect ptrace_may_access() with exec_update_lock (part 1)
Fix the easy cases where procfs currently calls ptrace_may_access() without
exec_update_lock protection, where the fix is to simply add the extra lock
or use mm_access():
- do_task_stat(): grab exec_update_lock
- proc_pid_wchan(): grab exec_update_lock
- proc_map_files_lookup(): use mm_access() instead of get_task_mm()
- proc_map_files_readdir(): use mm_access() instead of get_task_mm()
- proc_ns_get_link(): grab exec_update_lock
- proc_ns_readlink(): grab exec_update_lock |
| In the Linux kernel, the following vulnerability has been resolved:
HID: lg-g15: cancel pending work on remove to fix a use-after-free
lg_g15_data is allocated with devm and holds a work item. The report
handlers schedule that work straight from device input.
lg_g15_event() and lg_g15_v2_event() do it on the backlight cycle key,
and lg_g510_leds_event() does it too. The worker dereferences the
lg_g15_data back through container_of.
The driver had no remove callback and never cancelled the work. So if a
report scheduled the work and the keyboard was then unplugged, devres
freed lg_g15_data while the work was still pending or running, and the
worker touched freed memory. This is a use-after-free. It is reachable
as a race on device unplug.
Add a remove callback that cancels the work before devres frees the
state. g15->work is only initialized for the models that schedule it
(G15, G15 v2, G510). The G13 and Z-10 leave it zeroed, so guard the
cancel on g15->work.func to avoid cancelling a work that was never set
up. The g15 NULL test mirrors the one already in lg_g15_raw_event(). |
| In the Linux kernel, the following vulnerability has been resolved:
hfs/hfsplus: zero-initialize buffer in hfs_bnode_read
hfs_bnode_read() can return early without writing to the output buffer
when is_bnode_offset_valid() fails or when check_and_correct_requested_
length() corrects the length to zero. Callers such as hfs_bnode_read_
u16() and hfs_bnode_read_u8() pass stack-allocated buffers and use the
result unconditionally, leading to KMSAN uninit-value reports.
Rather than initializing at each individual call site, zero the buffer
at the start of hfs_bnode_read() before any validation checks. This
ensures all callers in both hfs and hfsplus get a deterministic zero
value regardless of which early-return path is taken. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: cdnsp: fix stream context array leak in cdnsp_alloc_stream_info()
cdnsp_alloc_stream_info() allocates stream_info->stream_ctx_array with
cdnsp_alloc_stream_ctx(). If a later stream ring allocation or stream
mapping update fails, the error path frees the allocated stream rings
and stream_rings array, but leaves stream_ctx_array allocated.
Free the stream context array before falling through to the stream_rings
cleanup path. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: free iso schedules on failed submit
EHCI and FOTG210 isochronous submits build an ehci_iso_sched before
linking the URB to the endpoint queue, and keep the staged schedule in
urb->hcpriv until iso_stream_schedule() and the link helpers consume it.
If the controller is no longer accessible, or usb_hcd_link_urb_to_ep()
fails, submit jumps to done_not_linked before that handoff happens and
leaks the staged schedule still attached to urb->hcpriv.
Free the staged schedule from done_not_linked when submit fails before
the URB is linked and clear urb->hcpriv after the free.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1.1.
An x86_64 allyesconfig build showed no new warnings. As we do not have an
EHCI host controller with a USB isochronous device to test with, no
runtime testing was able to be performed. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: legousbtower: fix use-after-free on disconnect race
mutex_unlock() may access the mutex structure after releasing the lock
and therefore cannot be used to manage lifetime of objects directly
(unlike spinlocks and refcounts). [1][2]
Use a kref to release the driver data to avoid use-after-free in
mutex_unlock() when release() races with disconnect().
[1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is
non-atomic")
[2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most
other sleeping locks, can still use the lock object
after it's unlocked") |
| In the Linux kernel, the following vulnerability has been resolved:
usb: mtu3: unmap request DMA on queue failure
mtu3_gadget_queue() maps the request before checking whether
the QMU GPD ring can accept another transfer. the request is
returned with -EAGAIN before it is linked on the endpoint
request list if mtu3_prepare_transfer() fails.
Normal completion and dequeue paths unmap requests from
mtu3_req_complete(), but this error path never reaches that
helper, so the DMA mapping is left active. Unmap the request
before returning from the failed queue path. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: ulpi: fix memory leak on registration failure
The allocated device name is never freed on early ULPI device
registration failures.
Fix this by initialising the device structure earlier and releasing the
initial reference whenever registration fails. |
| In the Linux kernel, the following vulnerability has been resolved:
usbip: vudc: fix NULL deref in vep_dequeue()
vep_alloc_request() wasn't initializing vrequest->udc, so cancellations
on the FunctionFS AIO path were arriving in vep_dequeue without a valid
UDC reference.
Since vrequest->udc is never actually properly used anywhere, we opt to
remove it, and update vep_dequeue to obtain a reference to the udc with
ep_to_vudc(), consistent with the other vep_ ops.
AFAICT this bug has existed for ~10 years. Seems that nobody has really
stressed the FunctionFS AIO path on usbip's vudc.
I tested this fix in a QEMU aarch64 guest driving FunctionFS endpoints
via AIO. Before the fix, running `usbip attach` from the host would
cause the guest to oops with the following backtrace:
Call trace:
vep_dequeue+0x1c/0xe4 (P)
usb_ep_dequeue+0x14/0x20
ffs_aio_cancel+0x24/0x34
__arm64_sys_io_cancel+0xb0/0x124
do_el0_svc+0x68/0x100
el0_svc+0x18/0x5c
el0t_64_sync_handler+0x98/0xdc
el0t_64_sync+0x154/0x158 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: ucsi: ccg: Fix use-after-free of ucsi on remove
The threaded IRQ handler ccg_irq_handler() calls ucsi_notify_common(),
which on a connector-change event calls ucsi_connector_change() and
schedules connector work. In ucsi_ccg_remove(), ucsi_destroy() frees
uc->ucsi (kfree) before free_irq() is called, so a handler invocation
already in flight may access the freed object after ucsi_destroy().
CPU 0 (remove) | CPU 1 (threaded IRQ)
ucsi_destroy(uc->ucsi) | ccg_irq_handler()
kfree(ucsi) // FREE | ucsi_notify_common(uc->ucsi) // USE
Move free_irq() before ucsi_destroy() in the remove path. It is kept
after ucsi_unregister(): ucsi_unregister() cancels connector work whose
handler issues GET_CONNECTOR_STATUS through ucsi_send_command_common(),
which waits for a completion that is signalled from the IRQ handler, so
the IRQ must stay active until that work has been cancelled.
The probe error path already orders free_irq() before ucsi_destroy().
This bug was found by static analysis. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - Do not initialize SNP for ioctl(SNP_VLEK_LOAD)
Sashiko notes:
> if SEV initialization fails and KVM is actively running normal VMs, could a
> userspace process trigger this code path via /dev/sev ioctls (e.g.,
> SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN
> execution for an active VM trigger a general protection fault and crash the
> host?
The SEV firmware docs for SNP_VLEK_LOAD note:
> On SNP_SHUTDOWN, the VLEK is deleted.
That is, the initialization/shutdown wrapper here is pointless, because the
firmware immediately throws away the key anyway. Instead, refuse to do
anything if SNP has not been previously initialized.
This is an ABI break: before, this was a no-op and almost certainly a
mistake by userspace, and now it returns -ENODEV. ABI compatibility could be
maintained here by simply returning 0 in the check instead. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: drbg - Fix returning success on failure in CTR_DRBG
drbg_ctr_generate() sometimes returns success when it fails, leaving the
output buffer uninitialized. Fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm: Fix freeing of PMD-sized vmemmap pages
Commit bf9e4e30f353 ("x86/mm: use pagetable_free()"), switched from
freeing non-boot page tables through __free_pages() to
pagetable_free().
However, the function is also called to free vmemmap pages.
Given that vmemmap pages are not page tables, already the page_ptdesc(page)
is wrong. But worse, pagetable_free() calls:
__free_pages(page, compound_order(page));
Since vmemmap pages are not compound pages (see vmemmap_alloc_block())
-- except for HVO, which doesn't apply here -- only first page of a
PMD-sized vmemmap page is freed, leaking the other ones.
Fix it by properly decoupling pagetable and vmemmap freeing.
free_pagetable() no longer has to mess with SECTION_INFO, as only the
vmemmap is marked like that in register_page_bootmem_memmap().
The indentation in remove_pmd_table() is messed up. Fix that while
touching it.
Bootmem info handling will soon be fixed up. For now, handle it
similar to free_pagetable(), just avoiding the ifdef.
[ dhansen: changelog munging. More imperative voice ] |
| In the Linux kernel, the following vulnerability has been resolved:
Input: elan_i2c - prevent division by zero and arithmetic underflow
The Elan I2C touchpad driver queries the device for its physical
dimensions and trace counts to calculate the device resolution and width.
However, if the device firmware or device tree provides invalid zero
values for x_traces or y_traces, it results in a fatal division-by-zero
exception leading to a kernel panic during device probe.
Add checks to ensure these parameters are non-zero before performing
the division. If invalid trace values are detected, fall back to a safe
default of 1.
Additionally, prevent an arithmetic underflow in the touch reporting
logic. Previously, if the calculated or fallback width was smaller than
ETP_FWIDTH_REDUCE (90), the subtraction would underflow, resulting in a
massive unsigned integer being reported to userspace. Clamp the adjusted
width to a minimum of 0 to safely handle small physical dimensions and
fallback scenarios.
Completing the probe with safe fallback values ensures the sysfs nodes
are created, keeping the firmware update path intact so a recovery
firmware can be flashed to the device. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: goodix - clamp the device-reported contact count
goodix_ts_read_input_report() copies the number of touch points reported
by the device into an on-stack buffer
u8 point_data[2 + GOODIX_MAX_CONTACT_SIZE * GOODIX_MAX_CONTACTS];
which is sized for at most GOODIX_MAX_CONTACTS (10) contacts. The only
runtime check bounds the per-interrupt count against ts->max_touch_num,
but that value is taken verbatim from a 4-bit field of the device
configuration block and is never clamped:
ts->max_touch_num = ts->config[MAX_CONTACTS_LOC] & 0x0f;
The nibble can be 0..15, so a malfunctioning, malicious or counterfeit
controller (or an attacker tampering with the I2C bus) can advertise up
to 15 contacts. goodix_ts_read_input_report() then accepts a touch_num
of up to 15 and the second goodix_i2c_read() writes
ts->contact_size * (touch_num - 1) bytes past the one-contact header into
point_data - up to 30 bytes (45 with the 9-byte report format) beyond the
92-byte buffer: a stack out-of-bounds write.
Clamp max_touch_num to GOODIX_MAX_CONTACTS, the number of contacts
point_data[] is sized for, when reading it from the configuration. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: iforce - bound the device-reported force-feedback effect index
iforce_process_packet() handles a status report (packet id 0x02) by
taking a force-feedback effect index straight from the device wire and
using it to address the per-effect state array:
i = data[1] & 0x7f;
if (data[1] & 0x80) {
if (!test_and_set_bit(FF_CORE_IS_PLAYED,
iforce->core_effects[i].flags))
...
} else if (test_and_clear_bit(FF_CORE_IS_PLAYED,
iforce->core_effects[i].flags)) {
...
}
The index is masked only with 0x7f, so it ranges 0..127, but
core_effects[] holds only IFORCE_EFFECTS_MAX (32) entries. For an index
of 32..127 the test_and_set_bit()/test_and_clear_bit() is an
out-of-bounds single-bit read-modify-write past the array. core_effects[]
is the second-to-last member of struct iforce, so the write lands in the
trailing members and beyond the embedding kzalloc()'d iforce_serio /
iforce_usb object.
data[1] is unvalidated device payload on both transports (the USB
interrupt endpoint and serio), and the status path is not gated on force
feedback being present, so a malicious or counterfeit device can set or
clear a bit at an attacker-chosen offset past the object.
Reject an out-of-range index instead of indexing with it. Bound against
the array dimension IFORCE_EFFECTS_MAX rather than dev->ff->max_effects so
the check guarantees memory safety regardless of how many effects the
device registered. A legitimate "effect started/stopped" status always
carries an index below IFORCE_EFFECTS_MAX, so well-formed devices are
unaffected; the neighbouring mark_core_as_ready() loop is already bounded
and is left untouched. |
| NVIDIA TensorRT-LLM contains a vulnerability where an attacker could cause a write-what-where condition. A successful exploit of this vulnerability might lead to data tampering, denial of service, and information disclosure. |
