| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bcachefs: bch2_ioctl_subvolume_destroy() fixes
bch2_evict_subvolume_inodes() was getting stuck - due to incorrectly
pruning the dcache.
Also, fix missing permissions checks. |
| Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: Libraries). Supported versions that are affected are Oracle Java SE: 21.0.8 and 25; Oracle GraalVM for JDK: 21.0.8; Oracle GraalVM Enterprise Edition: 21.3.15. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data. Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. CVSS 3.1 Base Score 3.7 (Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N). |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix legacy client tracking initialization
Get rid of the nfsd4_legacy_tracking_ops->init() call in
check_for_legacy_methods(). That will be handled in the caller
(nfsd4_client_tracking_init()). Otherwise, we'll wind up calling
nfsd4_legacy_tracking_ops->init() twice, and the second time we'll
trigger the BUG_ON() in nfsd4_init_recdir(). |
| Vulnerable Upgrade Feature (Arbitrary File Write) may lead to obtaining super user permissions on board.This issue affects BLU-IC2: through 1.19.5; BLU-IC4: through 1.19.5. |
| The administrator password setting of the D-Link DIR-820L 1.06B02 is has Improper Access Control and is vulnerable to Unverified Password Change via crafted POST request to /get_set.ccp. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: zswap: fix crypto_free_acomp() deadlock in zswap_cpu_comp_dead()
Currently, zswap_cpu_comp_dead() calls crypto_free_acomp() while holding
the per-CPU acomp_ctx mutex. crypto_free_acomp() then holds scomp_lock
(through crypto_exit_scomp_ops_async()).
On the other hand, crypto_alloc_acomp_node() holds the scomp_lock (through
crypto_scomp_init_tfm()), and then allocates memory. If the allocation
results in reclaim, we may attempt to hold the per-CPU acomp_ctx mutex.
The above dependencies can cause an ABBA deadlock. For example in the
following scenario:
(1) Task A running on CPU #1:
crypto_alloc_acomp_node()
Holds scomp_lock
Enters reclaim
Reads per_cpu_ptr(pool->acomp_ctx, 1)
(2) Task A is descheduled
(3) CPU #1 goes offline
zswap_cpu_comp_dead(CPU #1)
Holds per_cpu_ptr(pool->acomp_ctx, 1))
Calls crypto_free_acomp()
Waits for scomp_lock
(4) Task A running on CPU #2:
Waits for per_cpu_ptr(pool->acomp_ctx, 1) // Read on CPU #1
DEADLOCK
Since there is no requirement to call crypto_free_acomp() with the per-CPU
acomp_ctx mutex held in zswap_cpu_comp_dead(), move it after the mutex is
unlocked. Also move the acomp_request_free() and kfree() calls for
consistency and to avoid any potential sublte locking dependencies in the
future.
With this, only setting acomp_ctx fields to NULL occurs with the mutex
held. This is similar to how zswap_cpu_comp_prepare() only initializes
acomp_ctx fields with the mutex held, after performing all allocations
before holding the mutex.
Opportunistically, move the NULL check on acomp_ctx so that it takes place
before the mutex dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
media: vimc: skip .s_stream() for stopped entities
Syzbot reported [1] a warning prompted by a check in call_s_stream()
that checks whether .s_stream() operation is warranted for unstarted
or stopped subdevs.
Add a simple fix in vimc_streamer_pipeline_terminate() ensuring that
entities skip a call to .s_stream() unless they have been previously
properly started.
[1] Syzbot report:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 5933 at drivers/media/v4l2-core/v4l2-subdev.c:460 call_s_stream+0x2df/0x350 drivers/media/v4l2-core/v4l2-subdev.c:460
Modules linked in:
CPU: 0 UID: 0 PID: 5933 Comm: syz-executor330 Not tainted 6.13.0-rc2-syzkaller-00362-g2d8308bf5b67 #0
...
Call Trace:
<TASK>
vimc_streamer_pipeline_terminate+0x218/0x320 drivers/media/test-drivers/vimc/vimc-streamer.c:62
vimc_streamer_pipeline_init drivers/media/test-drivers/vimc/vimc-streamer.c:101 [inline]
vimc_streamer_s_stream+0x650/0x9a0 drivers/media/test-drivers/vimc/vimc-streamer.c:203
vimc_capture_start_streaming+0xa1/0x130 drivers/media/test-drivers/vimc/vimc-capture.c:256
vb2_start_streaming+0x15f/0x5a0 drivers/media/common/videobuf2/videobuf2-core.c:1789
vb2_core_streamon+0x2a7/0x450 drivers/media/common/videobuf2/videobuf2-core.c:2348
vb2_streamon drivers/media/common/videobuf2/videobuf2-v4l2.c:875 [inline]
vb2_ioctl_streamon+0xf4/0x170 drivers/media/common/videobuf2/videobuf2-v4l2.c:1118
__video_do_ioctl+0xaf0/0xf00 drivers/media/v4l2-core/v4l2-ioctl.c:3122
video_usercopy+0x4d2/0x1620 drivers/media/v4l2-core/v4l2-ioctl.c:3463
v4l2_ioctl+0x1ba/0x250 drivers/media/v4l2-core/v4l2-dev.c:366
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:906 [inline]
__se_sys_ioctl fs/ioctl.c:892 [inline]
__x64_sys_ioctl+0x190/0x200 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f2b85c01b19
... |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: don't ignore the return code of svc_proc_register()
Currently, nfsd_proc_stat_init() ignores the return value of
svc_proc_register(). If the procfile creation fails, then the kernel
will WARN when it tries to remove the entry later.
Fix nfsd_proc_stat_init() to return the same type of pointer as
svc_proc_register(), and fix up nfsd_net_init() to check that and fail
the nfsd_net construction if it occurs.
svc_proc_register() can fail if the dentry can't be allocated, or if an
identical dentry already exists. The second case is pretty unlikely in
the nfsd_net construction codepath, so if this happens, return -ENOMEM. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: put dl_stid if fail to queue dl_recall
Before calling nfsd4_run_cb to queue dl_recall to the callback_wq, we
increment the reference count of dl_stid.
We expect that after the corresponding work_struct is processed, the
reference count of dl_stid will be decremented through the callback
function nfsd4_cb_recall_release.
However, if the call to nfsd4_run_cb fails, the incremented reference
count of dl_stid will not be decremented correspondingly, leading to the
following nfs4_stid leak:
unreferenced object 0xffff88812067b578 (size 344):
comm "nfsd", pid 2761, jiffies 4295044002 (age 5541.241s)
hex dump (first 32 bytes):
01 00 00 00 6b 6b 6b 6b b8 02 c0 e2 81 88 ff ff ....kkkk........
00 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 ad 4e ad de .kkkkkkk.....N..
backtrace:
kmem_cache_alloc+0x4b9/0x700
nfsd4_process_open1+0x34/0x300
nfsd4_open+0x2d1/0x9d0
nfsd4_proc_compound+0x7a2/0xe30
nfsd_dispatch+0x241/0x3e0
svc_process_common+0x5d3/0xcc0
svc_process+0x2a3/0x320
nfsd+0x180/0x2e0
kthread+0x199/0x1d0
ret_from_fork+0x30/0x50
ret_from_fork_asm+0x1b/0x30
unreferenced object 0xffff8881499f4d28 (size 368):
comm "nfsd", pid 2761, jiffies 4295044005 (age 5541.239s)
hex dump (first 32 bytes):
01 00 00 00 00 00 00 00 30 4d 9f 49 81 88 ff ff ........0M.I....
30 4d 9f 49 81 88 ff ff 20 00 00 00 01 00 00 00 0M.I.... .......
backtrace:
kmem_cache_alloc+0x4b9/0x700
nfs4_alloc_stid+0x29/0x210
alloc_init_deleg+0x92/0x2e0
nfs4_set_delegation+0x284/0xc00
nfs4_open_delegation+0x216/0x3f0
nfsd4_process_open2+0x2b3/0xee0
nfsd4_open+0x770/0x9d0
nfsd4_proc_compound+0x7a2/0xe30
nfsd_dispatch+0x241/0x3e0
svc_process_common+0x5d3/0xcc0
svc_process+0x2a3/0x320
nfsd+0x180/0x2e0
kthread+0x199/0x1d0
ret_from_fork+0x30/0x50
ret_from_fork_asm+0x1b/0x30
Fix it by checking the result of nfsd4_run_cb and call nfs4_put_stid if
fail to queue dl_recall. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: add srng->lock for ath11k_hal_srng_* in monitor mode
ath11k_hal_srng_* should be used with srng->lock to protect srng data.
For ath11k_dp_rx_mon_dest_process() and ath11k_dp_full_mon_process_rx(),
they use ath11k_hal_srng_* for many times but never call srng->lock.
So when running (full) monitor mode, warning will occur:
RIP: 0010:ath11k_hal_srng_dst_peek+0x18/0x30 [ath11k]
Call Trace:
? ath11k_hal_srng_dst_peek+0x18/0x30 [ath11k]
ath11k_dp_rx_process_mon_status+0xc45/0x1190 [ath11k]
? idr_alloc_u32+0x97/0xd0
ath11k_dp_rx_process_mon_rings+0x32a/0x550 [ath11k]
ath11k_dp_service_srng+0x289/0x5a0 [ath11k]
ath11k_pcic_ext_grp_napi_poll+0x30/0xd0 [ath11k]
__napi_poll+0x30/0x1f0
net_rx_action+0x198/0x320
__do_softirq+0xdd/0x319
So add srng->lock for them to avoid such warnings.
Inorder to fetch the srng->lock, should change srng's definition from
'void' to 'struct hal_srng'. And initialize them elsewhere to prevent
one line of code from being too long. This is consistent with other ring
process functions, such as ath11k_dp_process_rx().
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: add check read-only before txBeginAnon() call
Added a read-only check before calling `txBeginAnon` in `extAlloc`
and `extRecord`. This prevents modification attempts on a read-only
mounted filesystem, avoiding potential errors or crashes.
Call trace:
txBeginAnon+0xac/0x154
extAlloc+0xe8/0xdec fs/jfs/jfs_extent.c:78
jfs_get_block+0x340/0xb98 fs/jfs/inode.c:248
__block_write_begin_int+0x580/0x166c fs/buffer.c:2128
__block_write_begin fs/buffer.c:2177 [inline]
block_write_begin+0x98/0x11c fs/buffer.c:2236
jfs_write_begin+0x44/0x88 fs/jfs/inode.c:299 |
| Improper authorization in Smart Switch installed on non-Samsung Device prior to version 3.7.64.10 allows local attackers to read data with the privilege of Smart Switch. User interaction is required for triggering this vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: add check read-only before truncation in jfs_truncate_nolock()
Added a check for "read-only" mode in the `jfs_truncate_nolock`
function to avoid errors related to writing to a read-only
filesystem.
Call stack:
block_write_begin() {
jfs_write_failed() {
jfs_truncate() {
jfs_truncate_nolock() {
txEnd() {
...
log = JFS_SBI(tblk->sb)->log;
// (log == NULL)
If the `isReadOnly(ip)` condition is triggered in
`jfs_truncate_nolock`, the function execution will stop, and no
further data modification will occur. Instead, the `xtTruncate`
function will be called with the "COMMIT_WMAP" flag, preventing
modifications in "read-only" mode. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/ASPM: Fix link state exit during switch upstream function removal
Before 456d8aa37d0f ("PCI/ASPM: Disable ASPM on MFD function removal to
avoid use-after-free"), we would free the ASPM link only after the last
function on the bus pertaining to the given link was removed.
That was too late. If function 0 is removed before sibling function,
link->downstream would point to free'd memory after.
After above change, we freed the ASPM parent link state upon any function
removal on the bus pertaining to a given link.
That is too early. If the link is to a PCIe switch with MFD on the upstream
port, then removing functions other than 0 first would free a link which
still remains parent_link to the remaining downstream ports.
The resulting GPFs are especially frequent during hot-unplug, because
pciehp removes devices on the link bus in reverse order.
On that switch, function 0 is the virtual P2P bridge to the internal bus.
Free exactly when function 0 is removed -- before the parent link is
obsolete, but after all subordinate links are gone.
[kwilczynski: commit log] |
| In the Linux kernel, the following vulnerability has been resolved:
ntb_hw_switchtec: Fix shift-out-of-bounds in switchtec_ntb_mw_set_trans
There is a kernel API ntb_mw_clear_trans() would pass 0 to both addr and
size. This would make xlate_pos negative.
[ 23.734156] switchtec switchtec0: MW 0: part 0 addr 0x0000000000000000 size 0x0000000000000000
[ 23.734158] ================================================================================
[ 23.734172] UBSAN: shift-out-of-bounds in drivers/ntb/hw/mscc/ntb_hw_switchtec.c:293:7
[ 23.734418] shift exponent -1 is negative
Ensuring xlate_pos is a positive or zero before BIT. |
| HCL Connections is vulnerable to a cross-site scripting attack where an attacker may leverage this issue to execute arbitrary script code in the browser of an unsuspecting user which leads to executing malicious script code. This may let the attacker steal cookie-based authentication credentials and comprise user's account then launch other attacks. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: xhci: Don't skip on Stopped - Length Invalid
Up until commit d56b0b2ab142 ("usb: xhci: ensure skipped isoc TDs are
returned when isoc ring is stopped") in v6.11, the driver didn't skip
missed isochronous TDs when handling Stoppend and Stopped - Length
Invalid events. Instead, it erroneously cleared the skip flag, which
would cause the ring to get stuck, as future events won't match the
missed TD which is never removed from the queue until it's cancelled.
This buggy logic seems to have been in place substantially unchanged
since the 3.x series over 10 years ago, which probably speaks first
and foremost about relative rarity of this case in normal usage, but
by the spec I see no reason why it shouldn't be possible.
After d56b0b2ab142, TDs are immediately skipped when handling those
Stopped events. This poses a potential problem in case of Stopped -
Length Invalid, which occurs either on completed TDs (likely already
given back) or Link and No-Op TRBs. Such event won't be recognized
as matching any TD (unless it's the rare Link TRB inside a TD) and
will result in skipping all pending TDs, giving them back possibly
before they are done, risking isoc data loss and maybe UAF by HW.
As a compromise, don't skip and don't clear the skip flag on this
kind of event. Then the next event will skip missed TDs. A downside
of not handling Stopped - Length Invalid on a Link inside a TD is
that if the TD is cancelled, its actual length will not be updated
to account for TRBs (silently) completed before the TD was stopped.
I had no luck producing this sequence of completion events so there
is no compelling demonstration of any resulting disaster. It may be
a very rare, obscure condition. The sole motivation for this patch
is that if such unlikely event does occur, I'd rather risk reporting
a cancelled partially done isoc frame as empty than gamble with UAF.
This will be fixed more properly by looking at Stopped event's TRB
pointer when making skipping decisions, but such rework is unlikely
to be backported to v6.12, which will stay around for a few years. |
| Delinea Secret Server before 11.7.000001 allows attackers to bypass authentication via the SOAP API in SecretServer/webservices/SSWebService.asmx. This is related to a hardcoded key, the use of the integer 2 for the Admin user, and removal of the oauthExpirationId attribute. |
| HCL Connections is vulnerable to a broken access control vulnerability that may allow an unauthorized user to update data in certain scenarios. |
| SAP Business Warehouse - Business Planning and
Simulation application does not sufficiently encode user-controlled inputs,
resulting in Stored Cross-Site Scripting (XSS) vulnerability. This
vulnerability allows users to modify website content and on successful
exploitation, an attacker can cause low impact to the confidentiality and
integrity of the application. |
