Search Results (6614 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2021-46912 1 Linux 1 Linux Kernel 2026-08-04 7.3 High
In the Linux kernel, the following vulnerability has been resolved: net: Make tcp_allowed_congestion_control readonly in non-init netns Currently, tcp_allowed_congestion_control is global and writable; writing to it in any net namespace will leak into all other net namespaces. tcp_available_congestion_control and tcp_allowed_congestion_control are the only sysctls in ipv4_net_table (the per-netns sysctl table) with a NULL data pointer; their handlers (proc_tcp_available_congestion_control and proc_allowed_congestion_control) have no other way of referencing a struct net. Thus, they operate globally. Because ipv4_net_table does not use designated initializers, there is no easy way to fix up this one "bad" table entry. However, the data pointer updating logic shouldn't be applied to NULL pointers anyway, so we instead force these entries to be read-only. These sysctls used to exist in ipv4_table (init-net only), but they were moved to the per-net ipv4_net_table, presumably without realizing that tcp_allowed_congestion_control was writable and thus introduced a leak. Because the intent of that commit was only to know (i.e. read) "which congestion algorithms are available or allowed", this read-only solution should be sufficient. The logic added in recent commit 31c4d2f160eb: ("net: Ensure net namespace isolation of sysctls") does not and cannot check for NULL data pointers, because other table entries (e.g. /proc/sys/net/netfilter/nf_log/) have .data=NULL but use other methods (.extra2) to access the struct net.
CVE-2026-67288 1 Freerdp 1 Freerdp 2026-08-03 7.5 High
FreeRDP before 3.29.0 contains a null pointer dereference vulnerability in smartcard cache request decoders that accept NULL NDR pointers for LookupName in SCARD_IOCTL_READCACHEA and SCARD_IOCTL_WRITECACHEA operations. When smartcard emulation is enabled, attackers can send crafted smartcard cache requests with NULL lookup-name pointers to trigger strlen() on a null pointer, causing client process termination.
CVE-2026-64457 1 Linux 1 Linux Kernel 2026-08-03 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: virtio_pci: fix vq info pointer lookup via wrong index Unbinding a virtio balloon device: echo virtio0 > /sys/bus/virtio/drivers/virtio_balloon/unbind triggers a NULL pointer dereference. The dmesg says: BUG: kernel NULL pointer dereference, address: 0000000000000008 [...] RIP: 0010:__list_del_entry_valid_or_report+0x5/0xf0 Call Trace: <TASK> vp_del_vqs+0x121/0x230 remove_common+0x135/0x150 virtballoon_remove+0xee/0x100 virtio_dev_remove+0x3b/0x80 device_release_driver_internal+0x187/0x2c0 unbind_store+0xb9/0xe0 kernfs_fop_write_iter.llvm.11660790530567441834+0xf6/0x180 vfs_write+0x2a9/0x3b0 ksys_write+0x5c/0xd0 do_syscall_64+0x54/0x230 entry_SYSCALL_64_after_hwframe+0x29/0x31 [...] </TASK> The virtio_balloon device registers 5 queues (inflate, deflate, stats, free_page, reporting) but only the first two are unconditional. The stats, free_page and reporting queues are each conditional on their respective feature bits. When any of these features are absent, the corresponding vqs_info entry has name == NULL, creating holes in the array. The root cause is an indexing mismatch introduced when vq info storage was changed to be passed as an argument. vp_find_vqs_msix() and vp_find_vqs_intx() store the info pointer at vp_dev->vqs[i], where 'i' is the caller's sparse array index. However, the virtqueue itself gets vq->index assigned from queue_idx, a dense index that skips NULL entries. When holes exist, 'i' and queue_idx diverge. Later, vp_del_vqs() looks up info via vp_dev->vqs[vq->index] using the dense index into the sparsely-populated array, and hits NULL. Fix this by storing info at vp_dev->vqs[queue_idx] instead of vp_dev->vqs[i], so the store index matches the lookup index (vq->index). Apply the fix to both the MSIX and INTX paths.
CVE-2026-67304 1 Freerdp 1 Freerdp 2026-08-03 7.5 High
FreeRDP before 3.29.0 contains a null pointer dereference vulnerability in smartcard device control request cleanup when reader-state decoding fails. Attackers can send malformed smartcard IRP requests with non-zero cReaders and truncated reader-state data to crash the process via null pointer access in free_reader_states functions.
CVE-2025-38299 2 Linux, Mediatek 2 Linux Kernel, Mt8195 2026-08-03 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: mt8195: Set ETDM1/2 IN/OUT to COMP_DUMMY() ETDM2_IN_BE and ETDM1_OUT_BE are defined as COMP_EMPTY(), in the case the codec dai_name will be null. Avoid a crash if the device tree is not assigning a codec to these links. [ 1.179936] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 1.181065] Mem abort info: [ 1.181420] ESR = 0x0000000096000004 [ 1.181892] EC = 0x25: DABT (current EL), IL = 32 bits [ 1.182576] SET = 0, FnV = 0 [ 1.182964] EA = 0, S1PTW = 0 [ 1.183367] FSC = 0x04: level 0 translation fault [ 1.183983] Data abort info: [ 1.184406] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 1.185097] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 1.185766] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 1.186439] [0000000000000000] user address but active_mm is swapper [ 1.187239] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 1.188029] Modules linked in: [ 1.188420] CPU: 7 UID: 0 PID: 70 Comm: kworker/u32:1 Not tainted 6.14.0-rc4-next-20250226+ #85 [ 1.189515] Hardware name: Radxa NIO 12L (DT) [ 1.190065] Workqueue: events_unbound deferred_probe_work_func [ 1.190808] pstate: 40400009 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 1.191683] pc : __pi_strcmp+0x24/0x140 [ 1.192170] lr : mt8195_mt6359_soc_card_probe+0x224/0x7b0 [ 1.192854] sp : ffff800083473970 [ 1.193271] x29: ffff800083473a10 x28: 0000000000001008 x27: 0000000000000002 [ 1.194168] x26: ffff800082408960 x25: ffff800082417db0 x24: ffff800082417d88 [ 1.195065] x23: 000000000000001e x22: ffff800082dbf480 x21: ffff800082dc07b8 [ 1.195961] x20: 0000000000000000 x19: 0000000000000013 x18: 00000000ffffffff [ 1.196858] x17: 000000040044ffff x16: 005000f2b5503510 x15: 0000000000000006 [ 1.197755] x14: ffff800082407af0 x13: 6e6f69737265766e x12: 692d6b636f6c6374 [ 1.198651] x11: 0000000000000002 x10: ffff80008240b920 x9 : 0000000000000018 [ 1.199547] x8 : 0101010101010101 x7 : 0000000000000000 x6 : 0000000000000000 [ 1.200443] x5 : 0000000000000000 x4 : 8080808080000000 x3 : 303933383978616d [ 1.201339] x2 : 0000000000000000 x1 : ffff80008240b920 x0 : 0000000000000000 [ 1.202236] Call trace: [ 1.202545] __pi_strcmp+0x24/0x140 (P) [ 1.203029] mtk_soundcard_common_probe+0x3bc/0x5b8 [ 1.203644] platform_probe+0x70/0xe8 [ 1.204106] really_probe+0xc8/0x3a0 [ 1.204556] __driver_probe_device+0x84/0x160 [ 1.205104] driver_probe_device+0x44/0x130 [ 1.205630] __device_attach_driver+0xc4/0x170 [ 1.206189] bus_for_each_drv+0x8c/0xf8 [ 1.206672] __device_attach+0xa8/0x1c8 [ 1.207155] device_initial_probe+0x1c/0x30 [ 1.207681] bus_probe_device+0xb0/0xc0 [ 1.208165] deferred_probe_work_func+0xa4/0x100 [ 1.208747] process_one_work+0x158/0x3e0 [ 1.209254] worker_thread+0x2c4/0x3e8 [ 1.209727] kthread+0x134/0x1f0 [ 1.210136] ret_from_fork+0x10/0x20 [ 1.210589] Code: 54000401 b50002c6 d503201f f86a6803 (f8408402) [ 1.211355] ---[ end trace 0000000000000000 ]---
CVE-2026-12166 1 Little Orbit 1 Gamefirst Anti-cheat 2026-08-03 5.5 Medium
A NULL pointer dereference vulnerability for driver `GFAC_Sys_x64.sys` in Little Orbit GFAC allows a local attacker to cause a denial of service via crafted requests that trigger a system crash.
CVE-2026-50810 1 Gpac 1 Gpac 2026-08-03 5.5 Medium
A NULL pointer dereference in smooth_parse_stream_index() in src/media_tools/mpd.c in GPAC master HEAD before commit b35c61f104b85fbb16520ac2838d5d2ef70845b5 allows attackers to cause a denial of service
CVE-2026-18064 1 Nasa 1 Core Flight System (cfs) Health & Safety (hs) Application 2026-08-02 7.5 High
An incomplete fix for CVE-2026-15352 in the NASA core Flight System (cFS) Health and Safety (HS) application leaves a separate NULL pointer dereference reachable in versions through 7.0.1. An attacker who can trigger the affected command under specific conditions could cause the HS application to crash, resulting in a denial-of-service condition and processor reset.
CVE-2026-20457 1 Mediatek, Inc. 1 Mediatek Chipset 2026-08-02 5.3 Medium
In Modem, there is a possible system crash due to improper input validation. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01826924; Issue ID: MSV-7301.
CVE-2025-69624 3 Gonitro, Microsoft, Nitro 3 Nitro Pdf Pro, Windows, Pdf Pro 2026-07-31 7.5 High
Nitro PDF Pro before 14.43 for Windows contains a NULL pointer dereference vulnerability in the JavaScript implementation of app.alert(). When app.alert() is called with more than one argument and the first argument evaluates to null (for example, app.alert(app.activeDocs, true) when app.activeDocs is null), the engine routes the call through a fallback path intended for non-string arguments. In this path, js_ValueToString() is invoked on the null value and returns an invalid string pointer, which is then passed to JS_GetStringChars() without validation. Dereferencing this pointer leads to an access violation and application crash when opening a crafted PDF. For example, 14.41.1.4 and 14.42.0.34 have been reported as vulnerable.
CVE-2026-36912 1 Aleksoid1978 1 Mpc-be 2026-07-31 7.5 High
A NULL pointer dereference in the AP4_AtomSampleTable::GetSample() function of Aleksoid1978 MPC-BE before commit 4341cb3 allows attackers to cause a Denial of Service (DoS) via a crafted MP4 file.
CVE-2026-38976 2026-07-31 7.5 High
mrubyc through 3.4.1 was found to contain a NULL pointer dereference in src/vm.c in op_super() / OP_SUPER due to a missing runtime guard for top-level super.
CVE-2026-50812 1 Sqlite 1 Sqlite 2026-07-31 5.5 Medium
A NULL pointer dereference in the SQLite Session Extension in SQLite 3.53.1 and SQLite trunk builds before check-in e807d4e3798efd53 allows an attacker who can supply a malformed changeset blob to cause a denial of service. The issue occurs when sqlite3changeset_apply_v3() applies a corrupt changeset and reaches sqlite3_value_type() with a NULL sqlite3_value pointer.
CVE-2026-62309 1 Coredns.io 1 Coredns 2026-07-30 7.5 High
CoreDNS is a DNS server written in Go. Prior to 1.14.4, a single 28-byte UDP datagram can crash the CoreDNS process when the proxyproto plugin is enabled because plugin/pkg/proxyproto/proxyproto.go PacketConn.ReadFrom handles a PROXY v2 header with non-UDP transport such as family byte 0x11, reassigns addr from a nil readFrom result after parseProxyProtocol errors, and calls addr.String() in the warning log before ServeDNS recovery applies. This issue is fixed in version 1.14.4.
CVE-2026-62299 1 Coredns.io 1 Coredns 2026-07-30 5.3 Medium
CoreDNS is a DNS server written in Go. Prior to 1.14.5, the CoreDNS rewrite plugin supports edns0 rewrite rules with an optional revert flag, and two response rules, edns0SetResponseRule and edns0ReplaceResponseRule[T] in plugin/rewrite/edns0.go, call res.IsEdns0() and immediately dereference the returned *dns.OPT without a nil check when a downstream plugin returns a response with no OPT record. A remote, unauthenticated client can send a single ordinary DNS query matching a rewrite edns0 <local|nsid|subnet> <set|append|replace> ... revert rule, causing ResponseReverter in plugin/rewrite/reverter.go to panic, return SERVFAIL, and degrade availability, or crash the CoreDNS process if the debug directive disables recovery. This issue is fixed in version 1.14.5.
CVE-2025-71236 1 Linux 1 Linux Kernel 2026-07-30 7.5 High
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Validate sp before freeing associated memory System crash with the following signature [154563.214890] nvme nvme2: NVME-FC{1}: controller connect complete [154564.169363] qla2xxx [0000:b0:00.1]-3002:2: nvme: Sched: Set ZIO exchange threshold to 3. [154564.169405] qla2xxx [0000:b0:00.1]-ffffff:2: SET ZIO Activity exchange threshold to 5. [154565.539974] qla2xxx [0000:b0:00.1]-5013:2: RSCN database changed – 0078 0080 0000. [154565.545744] qla2xxx [0000:b0:00.1]-5013:2: RSCN database changed – 0078 00a0 0000. [154565.545857] qla2xxx [0000:b0:00.1]-11a2:2: FEC=enabled (data rate). [154565.552760] qla2xxx [0000:b0:00.1]-11a2:2: FEC=enabled (data rate). [154565.553079] BUG: kernel NULL pointer dereference, address: 00000000000000f8 [154565.553080] #PF: supervisor read access in kernel mode [154565.553082] #PF: error_code(0x0000) - not-present page [154565.553084] PGD 80000010488ab067 P4D 80000010488ab067 PUD 104978a067 PMD 0 [154565.553089] Oops: 0000 1 PREEMPT SMP PTI [154565.553092] CPU: 10 PID: 858 Comm: qla2xxx_2_dpc Kdump: loaded Tainted: G OE ------- --- 5.14.0-503.11.1.el9_5.x86_64 #1 [154565.553096] Hardware name: HPE Synergy 660 Gen10/Synergy 660 Gen10 Compute Module, BIOS I43 09/30/2024 [154565.553097] RIP: 0010:qla_fab_async_scan.part.0+0x40b/0x870 [qla2xxx] [154565.553141] Code: 00 00 e8 58 a3 ec d4 49 89 e9 ba 12 20 00 00 4c 89 e6 49 c7 c0 00 ee a8 c0 48 c7 c1 66 c0 a9 c0 bf 00 80 00 10 e8 15 69 00 00 <4c> 8b 8d f8 00 00 00 4d 85 c9 74 35 49 8b 84 24 00 19 00 00 48 8b [154565.553143] RSP: 0018:ffffb4dbc8aebdd0 EFLAGS: 00010286 [154565.553145] RAX: 0000000000000000 RBX: ffff8ec2cf0908d0 RCX: 0000000000000002 [154565.553147] RDX: 0000000000000000 RSI: ffffffffc0a9c896 RDI: ffffb4dbc8aebd47 [154565.553148] RBP: 0000000000000000 R08: ffffb4dbc8aebd45 R09: 0000000000ffff0a [154565.553150] R10: 0000000000000000 R11: 000000000000000f R12: ffff8ec2cf0908d0 [154565.553151] R13: ffff8ec2cf090900 R14: 0000000000000102 R15: ffff8ec2cf084000 [154565.553152] FS: 0000000000000000(0000) GS:ffff8ed27f800000(0000) knlGS:0000000000000000 [154565.553154] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [154565.553155] CR2: 00000000000000f8 CR3: 000000113ae0a005 CR4: 00000000007706f0 [154565.553157] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [154565.553158] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [154565.553159] PKRU: 55555554 [154565.553160] Call Trace: [154565.553162] <TASK> [154565.553165] ? show_trace_log_lvl+0x1c4/0x2df [154565.553172] ? show_trace_log_lvl+0x1c4/0x2df [154565.553177] ? qla_fab_async_scan.part.0+0x40b/0x870 [qla2xxx] [154565.553215] ? __die_body.cold+0x8/0xd [154565.553218] ? page_fault_oops+0x134/0x170 [154565.553223] ? snprintf+0x49/0x70 [154565.553229] ? exc_page_fault+0x62/0x150 [154565.553238] ? asm_exc_page_fault+0x22/0x30 Check for sp being non NULL before freeing any associated memory
CVE-2025-40251 1 Linux 1 Linux Kernel 2026-07-30 7.8 High
In the Linux kernel, the following vulnerability has been resolved: devlink: rate: Unset parent pointer in devl_rate_nodes_destroy The function devl_rate_nodes_destroy is documented to "Unset parent for all rate objects". However, it was only calling the driver-specific `rate_leaf_parent_set` or `rate_node_parent_set` ops and decrementing the parent's refcount, without actually setting the `devlink_rate->parent` pointer to NULL. This leaves a dangling pointer in the `devlink_rate` struct, which cause refcount error in netdevsim[1] and mlx5[2]. In addition, this is inconsistent with the behavior of `devlink_nl_rate_parent_node_set`, where the parent pointer is correctly cleared. This patch fixes the issue by explicitly setting `devlink_rate->parent` to NULL after notifying the driver, thus fulfilling the function's documented behavior for all rate objects. [1] repro steps: echo 1 > /sys/bus/netdevsim/new_device devlink dev eswitch set netdevsim/netdevsim1 mode switchdev echo 1 > /sys/bus/netdevsim/devices/netdevsim1/sriov_numvfs devlink port function rate add netdevsim/netdevsim1/test_node devlink port function rate set netdevsim/netdevsim1/128 parent test_node echo 1 > /sys/bus/netdevsim/del_device dmesg: refcount_t: decrement hit 0; leaking memory. WARNING: CPU: 8 PID: 1530 at lib/refcount.c:31 refcount_warn_saturate+0x42/0xe0 CPU: 8 UID: 0 PID: 1530 Comm: bash Not tainted 6.18.0-rc4+ #1 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:refcount_warn_saturate+0x42/0xe0 Call Trace: <TASK> devl_rate_leaf_destroy+0x8d/0x90 __nsim_dev_port_del+0x6c/0x70 [netdevsim] nsim_dev_reload_destroy+0x11c/0x140 [netdevsim] nsim_drv_remove+0x2b/0xb0 [netdevsim] device_release_driver_internal+0x194/0x1f0 bus_remove_device+0xc6/0x130 device_del+0x159/0x3c0 device_unregister+0x1a/0x60 del_device_store+0x111/0x170 [netdevsim] kernfs_fop_write_iter+0x12e/0x1e0 vfs_write+0x215/0x3d0 ksys_write+0x5f/0xd0 do_syscall_64+0x55/0x10f0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 [2] devlink dev eswitch set pci/0000:08:00.0 mode switchdev devlink port add pci/0000:08:00.0 flavour pcisf pfnum 0 sfnum 1000 devlink port function rate add pci/0000:08:00.0/group1 devlink port function rate set pci/0000:08:00.0/32768 parent group1 modprobe -r mlx5_ib mlx5_fwctl mlx5_core dmesg: refcount_t: decrement hit 0; leaking memory. WARNING: CPU: 7 PID: 16151 at lib/refcount.c:31 refcount_warn_saturate+0x42/0xe0 CPU: 7 UID: 0 PID: 16151 Comm: bash Not tainted 6.17.0-rc7_for_upstream_min_debug_2025_10_02_12_44 #1 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:refcount_warn_saturate+0x42/0xe0 Call Trace: <TASK> devl_rate_leaf_destroy+0x8d/0x90 mlx5_esw_offloads_devlink_port_unregister+0x33/0x60 [mlx5_core] mlx5_esw_offloads_unload_rep+0x3f/0x50 [mlx5_core] mlx5_eswitch_unload_sf_vport+0x40/0x90 [mlx5_core] mlx5_sf_esw_event+0xc4/0x120 [mlx5_core] notifier_call_chain+0x33/0xa0 blocking_notifier_call_chain+0x3b/0x50 mlx5_eswitch_disable_locked+0x50/0x110 [mlx5_core] mlx5_eswitch_disable+0x63/0x90 [mlx5_core] mlx5_unload+0x1d/0x170 [mlx5_core] mlx5_uninit_one+0xa2/0x130 [mlx5_core] remove_one+0x78/0xd0 [mlx5_core] pci_device_remove+0x39/0xa0 device_release_driver_internal+0x194/0x1f0 unbind_store+0x99/0xa0 kernfs_fop_write_iter+0x12e/0x1e0 vfs_write+0x215/0x3d0 ksys_write+0x5f/0xd0 do_syscall_64+0x53/0x1f0 entry_SYSCALL_64_after_hwframe+0x4b/0x53
CVE-2025-39906 1 Linux 1 Linux Kernel 2026-07-30 7.8 High
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: remove oem i2c adapter on finish Fixes a bug where unbinding of the GPU would leave the oem i2c adapter registered resulting in a null pointer dereference when applications try to access the invalid device. (cherry picked from commit 89923fb7ead4fdd37b78dd49962d9bb5892403e6)
CVE-2025-39902 2 Debian, Linux 2 Debian Linux, Linux Kernel 2026-07-30 7.1 High
In the Linux kernel, the following vulnerability has been resolved: mm/slub: avoid accessing metadata when pointer is invalid in object_err() object_err() reports details of an object for further debugging, such as the freelist pointer, redzone, etc. However, if the pointer is invalid, attempting to access object metadata can lead to a crash since it does not point to a valid object. One known path to the crash is when alloc_consistency_checks() determines the pointer to the allocated object is invalid because of a freelist corruption, and calls object_err() to report it. The debug code should report and handle the corruption gracefully and not crash in the process. In case the pointer is NULL or check_valid_pointer() returns false for the pointer, only print the pointer value and skip accessing metadata.
CVE-2025-39897 1 Linux 1 Linux Kernel 2026-07-30 7.5 High
In the Linux kernel, the following vulnerability has been resolved: net: xilinx: axienet: Add error handling for RX metadata pointer retrieval Add proper error checking for dmaengine_desc_get_metadata_ptr() which can return an error pointer and lead to potential crashes or undefined behaviour if the pointer retrieval fails. Properly handle the error by unmapping DMA buffer, freeing the skb and returning early to prevent further processing with invalid data.