| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: clear ce->tgthint in free_tgts()
When free_tgts() frees all structures in ce->tlist, ce->tgthint
is left pointing to one of the freed cache_dfs_tgt structures.
If ce->tgthint is not reset before it is used later, it results
in a use-after-free.
Set ce->tgthint to NULL in free_tgts() after the elements are
freed to reflect that no elements remain. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix ALIGN() overflow in symlink_data() error context loop
The check added by commit 7d9a7f1f96cd ("smb/client: fix possible
infinite loop and oob read in symlink_data()") compared the post-ALIGN
length against the remaining buffer, but ALIGN() itself can overflow:
for ErrorDataLength near UINT32_MAX (e.g. 0xFFFFFFF9), ALIGN(x, 8)
wraps to 0, so the subsequent bounds check passes, and the loop
advances by zero bytes leaving 'p' pointing into stale data.
Fix by checking the raw ErrorDataLength against the remaining space
before applying ALIGN(), then checking again after. Since raw_len is
bounded by the buffer, raw_len + 7 cannot overflow, so the second check
is an exact post-alignment bounds guard. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: picolcd: clamp eeprom debugfs read to bytes actually received
picolcd_debug_eeprom_read() trusts resp->raw_data[2] -- a length byte
supplied by the device in its REPORT_EE_DATA reply -- clamped only to
the caller's read() count:
ret = resp->raw_data[2];
if (ret > s)
ret = s;
if (copy_to_user(u, resp->raw_data+3, ret))
It never checks resp->raw_size, the number of bytes picolcd_raw_event()
actually copied into the 64-byte raw_data[] of the kmalloc'd struct
picolcd_pending. A device (or a spoofed picoLCD) returning a length byte
of 0xff, read with a count >= 255, makes copy_to_user() read past
raw_data[] into adjacent slab memory and return it to userspace through
the debugfs "eeprom" file:
BUG: KASAN: slab-out-of-bounds in _copy_to_user
Read of size 255 ... picolcd_debug_eeprom_read+0x214/0x2f0 [hid_picolcd]
The debug-dump path in the same file already validates the device length
byte against the received size before trusting it; this read does not.
The file is created S_IRUSR (root-only) and a crafted device is needed,
so it is neither unprivileged- nor remotely-triggerable.
Clamp the copy length to resp->raw_size - 3 (the payload actually
received, minus the 3-byte header), floored at 0 for short replies. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: roccat: free buffered reports when destroying device
roccat_report_event() duplicates each report with kmemdup() and stores
the allocation in a circular-buffer slot. The allocation is released only
when that slot is reused.
The device destruction paths free struct roccat_device without releasing
reports still stored in cbuf[]. This makes those allocations unreachable
and leaks up to ROCCAT_CBUF_SIZE report buffers per device.
Add a small destructor that frees every buffered report before freeing the
device, and use it in both paths that can destroy a registered device. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: sensor: custom: Fix field sysfs group cleanup on failure
hid_sensor_custom_add_attributes() creates one sysfs group for each
custom sensor field. If sysfs_create_group() fails after some groups
have already been created, the function returns the error without
removing the previously created groups.
Add a local unwind path to remove the groups that were already created.
With enable_sensor exposed only after the field attributes are ready,
this path can free sensor_inst->fields without leaving enable_sensor
able to access pointers into that array. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: mcp2221: stop device IO before hid_hw_stop
Quiesce device IO at the start of the devm cleanup callback
mcp2221_hid_unregister() so that incoming HID reports cannot race with
hardware teardown during probe failure or device removal, addressing a
potential use-after-free.
Guard the call to hid_device_io_stop() with io_started. On normal
removal hid_device_remove() has already cleared io_started before the
devres group is released, so an unconditional call would otherwise hit
the !io_started path and emit a spurious "io already stopped" warning
on every removal. The guard preserves the probe-failure balancing,
where io_started is still set after hid_device_io_start(), while
staying silent on the normal removal path. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: mcp2221: validate report size in mcp2221_raw_event()
mcp2221_raw_event() never validates the size of incoming HID reports.
In the MCP2221_I2C_GET_DATA path it trusts the device-supplied data[3]
as the copy length without checking that 4 + data[3] bytes actually
exist in the received report. A malicious or misbehaving USB device can
send a short report with a large data[3], causing the memcpy to read
past the valid report data in the HID transfer buffer and leak
uninitialized kernel memory back to userspace through the I2C/SMBus
read path.
Add a minimum size check at entry and validate that the source range
fits within the received report before the copy. |
| In the Linux kernel, the following vulnerability has been resolved:
eventfs: Initialize ei->children and ei->list in init_ei()
eventfs_create_dir() allocates the eventfs_inode and initializes it with
init_ei(). But this does not initialize the eventfs_inode list_heads. If
the eventfs_create_dir() fails due to memory pressure, it will call
free_ei() before it initialized the lists, and that checks to make sure
the eventfs_inode has no children. But because the list wasn't
initialized, it will give a false warning.
Fix it by moving the list initialization into init_ei().
[ Rewrote change log ] |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: validate dirty page table on log replay
Each DIR_PAGE_ENTRY ends in a page_lcns[] array whose length is the on-disk
lcns_follow field. check_rstbl() validates the table bookkeeping but never
checks that this array fits in the entry, so a crafted lcns_follow lets the
v0->v1 conversion memmove and later replay passes run off the entry.
Add check_dp_table() to reject, right after check_rstbl(), any entry larger
than its size claims via struct_size() (the same expression used to allocate
these entries, so the check is overflow-safe by construction). All consumers
can then trust lcns_follow as the real capacity. This covers every
page_lcns[] access whose index is bounded by the entry itself (the
conversion memmove, the HotFix store via find_dp(), and the self-bounded
scan loops). Accesses whose index comes from the log record need a separate
bound and are handled in a follow-up patch. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: fix info-leak on partial LZNT decompress in ni_read_frame()
ni_read_frame() decompresses an LZNT $DATA frame into the vmapped target
pages and then trusts decompress_lznt()'s return value:
unc_size = decompress_lznt(frame_ondisk, ondisk_size, frame_mem,
frame_size);
if ((ssize_t)unc_size < 0) err = unc_size;
else if (!unc_size || unc_size > frame_size) err = -EINVAL;
decompress_lznt() stops as soon as the compressed stream is exhausted
(e.g. a zero chunk header) and returns the number of bytes it actually
wrote, which may be far less than frame_size. The bytes between unc_size
and frame_size are never written. The only memset() that follows zeroes
the region beyond i_valid; when the frame lies entirely within the file's
valid size that memset() does not run, so the gap retains whatever was in
the just-vmapped pages. All pages are then marked uptodate and returned
to userspace, disclosing uninitialized (recently-freed) kernel page
memory. A crafted compressed file whose stream decompresses to only a few
bytes leaks the remainder of every frame on a plain read(2), which is
enough to recover kernel pointers and defeat KASLR.
Zero the [unc_size, frame_size) tail immediately after a successful LZNT
decompress so the remainder reads back as zero. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: bound page_lcns[] index by the log record
The copy_lcns loop and the redo shorten loop index page_lcns[] at j + i,
where i runs up to the log record's lcns_follow. That count is checked only
against the record's own length, not the target entry, so check_dp_table()
(which validates the entry's lcns_follow) does not cover it: the copy_lcns
entry may even be freshly allocated after that check, and find_dp() bounds j
but not i. A crafted record thus overflows page_lcns[] of an otherwise valid
entry.
Add dp_range_ok() and reject, before each loop, any record whose run does
not fit the entry. These are the only two page_lcns[] accesses indexed by
the record rather than the entry, so together with the entry validation
every access is now bounded.
[almaz.alexandrovich@paragon-software.com: original patch contained changes to the problem already handled, applied partly] |
| In the Linux kernel, the following vulnerability has been resolved:
ecryptfs: hold msg ctx list lock when cleaning daemon queue
ecryptfs_exorcise_daemon() drops queued messages from a dying daemon
without holding ecryptfs_msg_ctx_lists_mux, but
ecryptfs_msg_ctx_alloc_to_free() requires that lock.
Take the list lock while moving the queued contexts back to the free
list to avoid racing with other global msg ctx list users. |
| In the Linux kernel, the following vulnerability has been resolved:
ecryptfs: pass packet set buffer size to parser
ecryptfs_parse_packet_set() receives a pointer into the file header, but
it calculates the remaining packet buffer size from PAGE_SIZE - 8. For
version 1 headers the packet set starts later in the header, so this can
overstate the available buffer.
Pass the actual packet set buffer length from the caller and calculate
per-packet limits from the remaining bytes in that buffer. Recompute the
remaining length after consuming a tag 3 packet before parsing the
following tag 11 packet. |
| In the Linux kernel, the following vulnerability has been resolved:
ecryptfs: reject oversized encrypted_key_size in parse_tag_3_packet
parse_tag_3_packet() set encrypted_key_size from the Tag 3 packet body
without bounding it against ECRYPTFS_MAX_KEY_BYTES (64). When
encrypted_key_size > 64, decrypt_passphrase_encrypted_session_key()
sets decrypted_key_size = encrypted_key_size and performs two
out-of-bounds writes:
1. crypto_skcipher_decrypt() writes encrypted_key_size bytes into
decrypted_key[64] via scatterlist, overflowing into the parent
ecryptfs_auth_tok struct.
2. memcpy(crypt_stat->key, decrypted_key, decrypted_key_size) writes
into crypt_stat->key[64], corrupting root_iv, keysig_list, and
mutexes in ecryptfs_crypt_stat.
Only AES-192 (cipher code 0x08) enables this because it sets
crypt_stat->key_size = 24 independently of encrypted_key_size,
allowing crypto_skcipher_setkey() to succeed while encrypted_key_size
exceeds ECRYPTFS_MAX_KEY_BYTES.
The PKI decryption path (parse_tag_65_packet) already validates
decrypted_key_size <= ECRYPTFS_MAX_KEY_BYTES; the passphrase path
omits this check.
Bound encrypted_key_size against ECRYPTFS_MAX_KEY_BYTES (64) rather
than ECRYPTFS_MAX_ENCRYPTED_KEY_BYTES (512). The 64-byte limit also
protects the 512-byte encrypted_key[] buffer, so the former 512-byte
check is removed as redundant.
[tyhicks: Adjust the code comment to refer to macros representing the
buffer sizes rather than mentioning the buffer size values since they
may change in the future] |
| In the Linux kernel, the following vulnerability has been resolved:
ecryptfs: reject too-small tag 70 packets
ecryptfs_parse_tag_70_packet() subtracts fixed metadata fields from the
parsed packet body size to derive the encrypted filename size. A
malformed packet with a body smaller than those fixed fields can underflow
that size calculation.
Reject tag 70 packets before the subtraction unless the body contains the
signature, cipher code, and at least one byte of encrypted filename data. |
| In the Linux kernel, the following vulnerability has been resolved:
ecryptfs: release message context on send failure
ecryptfs_send_message_locked() moves a message context from the free
list to the allocated list before sending the request to the userspace
daemon.
If ecryptfs_send_miscdev() fails, the context is left on the
allocated list and cannot be reused. Move it back to the free list on
failure and clear the caller's pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
efivarfs: Rate limit statfs() handler
Ravi reports that statfs() may be called by unprivileged users on the
efivarfs mount point, which may result in a flood of calls to the
QueryVariableInfo() runtime service. These calls are disproportionately
costly on x86 systems where the variable store is backed by SMM, as each
SMM entry requires a rendez-vous of all the CPUs.
So rate limit the calls to QueryVariableInfo() at twice per second, and
return the most recently obtained value for calls that are elided. |
| In the Linux kernel, the following vulnerability has been resolved:
entry: Fix seccomp bypass after ptrace with TSYNC
Sashiko review pointed out the following issue.
If a thread is stopped in syscall_trace_enter() for ptrace, another
thread can install a seccomp filter with SECCOMP_FILTER_FLAG_TSYNC
(e.g., via seccomp_attach_filter()). This will successfully set
SYSCALL_WORK_SECCOMP on the stopped thread, but syscall_trace_enter()
evaluates a cached 'work' variable sampled on entry. Consequently,
the subsequent check for SYSCALL_WORK_SECCOMP misses the newly
assigned flag, and the filter is silently bypassed.
This race condition could allow an unprivileged process to execute
a prohibited system call (e.g., execve) that the newly installed filter
was intended to block, especially since the tracer might have modified
the system call number during the ptrace stop.
Fix this by re-reading the syscall_work flags after ptrace handling,
so that any new SYSCALL_WORK_SECCOMP flag set by another thread via
TSYNC during the ptrace stop is observed before the subsequent
seccomp check. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: omapfb: panel-dsi-cm: initialize lock before registering display
dsicm_probe() registers the display before initializing ddata->lock.
Once omapdss_register_display() publishes the display, another consumer
can reach a dsicm callback that takes this mutex while it is still
uninitialized.
Initialize the mutex before registering the display so the published
callbacks always see a valid lock. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: ssd1307fb: defer I2C transfers from damage callbacks
The fbdev damage callbacks may run from fbcon while printk has disabled
preemption. They currently update the display synchronously, which enters
the sleeping I2C transfer path from atomic context.
A complete report from an RK3566 system follows:
[ 258.129004] watchdog: watchdog0: watchdog did not stop!
[ 258.129067] BUG: scheduling while atomic: systemd/1/0x00000003
[ 258.129076] Modules linked in: algif_hash algif_skcipher af_alg bnep
binfmt_misc lz4hc lz4 zram snd_soc_hdmi_codec brcmfmac_wcc hci_uart
fb_ssd1306(C) fbtft(C) btqca btrtl btintel btsdio snd_soc_simple_card
motorcomm pwm_fan snd_soc_simple_card_utils ssd130x_spi nls_iso8859_1
ssd130x btbcm drm_shmem_helper display_connector brcmfmac ssd1307fb
brcmutil bluetooth cfg80211 rfkill snd_soc_rockchip_i2s_tdm
snd_soc_rk817 hantro_vpu snd_soc_core snd_compress snd_pcm_dmaengine
v4l2_vp9 snd_pcm v4l2_h264 rockchip_rga snd_timer rk_crypto2
spi_rockchip_sfc videobuf2_dma_contig snd sm3_generic v4l2_mem2mem
videobuf2_dma_sg dwmac_rk sm3 soundcore videobuf2_memops videobuf2_v4l2
stmmac_platform dw_hdmi_cec videodev videobuf2_common dw_hdmi_i2s_audio
stmmac rk817_charger pcs_xpcs mc cpufreq_dt sch_fq_codel ip_tables
x_tables autofs4
[ 258.129215] Preemption disabled at:
[ 258.129216] [<ffff80008012f96c>] vprintk_emit+0x11c/0x340
[ 258.129234] CPU: 0 PID: 1 Comm: systemd Tainted: G C
6.6.0-rc5-rockchip-rk356x #4
[ 258.129239] Hardware name: Rockchip RK3566 OPi 3B (DT)
[ 258.129243] Call trace:
[ 258.129245] dump_backtrace+0xa0/0x128
[ 258.129252] show_stack+0x20/0x38
[ 258.129256] dump_stack_lvl+0x60/0xb0
[ 258.129265] dump_stack+0x18/0x28
[ 258.129269] __schedule_bug+0xa0/0xc8
[ 258.129274] __schedule+0x9ac/0xd30
[ 258.129279] schedule+0x60/0x100
[ 258.129282] schedule_timeout+0x194/0x338
[ 258.129289] rk3x_i2c_xfer_common.isra.0+0x384/0x498
[ 258.129296] rk3x_i2c_xfer+0x20/0x60
[ 258.129300] __i2c_transfer+0x194/0x648
[ 258.129308] i2c_transfer+0x9c/0x130
[ 258.129313] i2c_transfer_buffer_flags+0x64/0x98
[ 258.129318] ssd1307fb_update_rect+0x42c/0x560 [ssd1307fb]
[ 258.129334] ssd1307fb_defio_imageblit+0x34/0x50 [ssd1307fb]
[ 258.129343] soft_cursor+0x13c/0x210
[ 258.129350] bit_cursor+0x2dc/0x550
[ 258.129354] fbcon_cursor+0xec/0x108
[ 258.129359] hide_cursor+0x44/0xc8
[ 258.129365] vt_console_print+0x398/0x3b0
[ 258.129370] console_flush_all.isra.0+0x17c/0x410
[ 258.129377] console_unlock+0x4c/0x100
[ 258.129382] vprintk_emit+0x1c8/0x340
[ 258.129386] vprintk_default+0x40/0x58
[ 258.129389] vprintk+0xb8/0xd0
[ 258.129392] _printk+0x68/0x98
[ 258.129398] watchdog_release+0x170/0x230
[ 258.129404] __fput+0xbc/0x288
[ 258.129409] __fput_sync+0x58/0x70
[ 258.129413] __arm64_sys_close+0x40/0x90
[ 258.129419] invoke_syscall+0x4c/0x118
[ 258.129426] el0_svc_common.constprop.0+0x48/0xf0
[ 258.129432] do_el0_svc+0x24/0x38
[ 258.129437] el0_svc+0x48/0x100
[ 258.129443] el0t_64_sync_handler+0xc0/0xc8
[ 258.129448] el0t_64_sync+0x190/0x198
[ 258.573087] ------------[ cut here ]------------
[ 258.573098] DEBUG_LOCKS_WARN_ON(val > preempt_count())
[ 258.573111] WARNING: CPU: 0 PID: 1 at kernel/sched/core.c:5871
preempt_count_sub+0x9c/0x148
[ 258.573130] Modules linked in: algif_hash algif_skcipher af_alg bnep
binfmt_misc lz4hc lz4 zram snd_soc_hdmi_codec brcmfmac_wcc hci_uart
fb_ssd1306(C) fbtft(C) btqca btrtl btintel btsdio snd_soc_simple_card
motorcomm pwm_fan snd_soc_simple_card_utils ssd130x_spi nls_iso8859_1
ssd130x btbcm drm_shmem_helper display_connector brcmfmac ssd1307fb
brcmutil bluetooth cfg80211 rfkill snd_soc_rockchip_i2s_tdm
snd_soc_rk817 hantro_vpu snd_soc_core snd_compress snd_pcm_dmaengine
v4l2_vp
---truncated--- |
