| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: hold conn in hci_connect_big_sync() callback
There is theoretical UAF if the conn is freed while the hci_sync task is
running.
Hold refcount to avoid that. Handle NULL hcon, return 0 + do nothing to
match the previous behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: hold conn in hci_connect_pa_sync() callback
There is theoretical UAF if the conn is freed while the hci_sync task is
running.
Hold refcount to avoid that. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: hold conn in hci_past_sync() callback
Avoids giving freed pointers to hci_conn_valid(), which kmalloc may have
reused.
Hold refcount to avoid that. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: Block VFs from clobbering special CGX PKIND state
PF and VF NIX LFs that share a CGX LMAC reuse the same hardware PKIND
programming. When HiGig2 or EDSA parsing is enabled, a VF NIX LF alloc must
not reset the LMAC RX PKIND or default TX parse config over the PF setup.
Add cgx_get_pkind() and rvu_cgx_is_pkind_config_permitted() so VFs skip
cgx_set_pkind(), rvu_npc_set_pkind(), and NIX_AF_LFX_TX_PARSE_CFG updates
when the LMAC is using NPC_RX_HIGIG_PKIND or NPC_RX_EDSA_PKIND. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Fix potential deadlock in mpi3mr_fault_uevent_emit
mpi3mr_fault_uevent_emit() runs from the fault watchdog and reset paths
where host I/O may already be blocked. GFP_KERNEL allocations here, both
the local kzalloc_obj() and the ones inside kobject_uevent_env() itself,
can trigger reclaim that waits on that blocked I/O and deadlock.
Use memalloc_noio_save()/restore() to cover the whole call instead of
just the local allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
net: sxgbe: free TX rings on RX allocation failure
When RX descriptor ring allocation fails, init_dma_desc_rings() only
frees the partially allocated RX rings and returns. The TX rings that
were allocated earlier in the same function are leaked.
Rearrange error labels to clean up TX rings upon RX failures. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: mm: Fix out-of-bounds page-table walk during memory hot-remove
remove_pud_mapping() and remove_p4d_mapping() obtain a child table base
with pud_offset(p4dp, 0) and p4d_offset(pgd, 0), then add the index for
addr.
RISC-V folds page-table levels at runtime. When a level is folded, its
offset helper returns the parent entry itself, but the index can still be
nonzero. Adding it walks past the parent table. Sv48 folds P4D, while Sv39
folds both P4D and PUD, so memory hot-remove can descend into unrelated
memory and pass an invalid page to __free_pages(). This can trigger:
kernel BUG at include/linux/mm.h:1810!
VM_BUG_ON_PAGE(page_ref_count(page) == 0)
arch_remove_memory+0x1e/0x5c
try_remove_memory+0x15e/0x200
remove_memory+0x24/0x3c
Only add the index when the corresponding page-table level is enabled,
matching p4d_offset() and pud_offset(). |
| In the Linux kernel, the following vulnerability has been resolved:
qede: sync udp_tunnel ports outside qede_lock in the recovery path
A TX timeout on a qede NIC that has VXLAN/GENEVE tunnel ports
configured wedges the rtnetlink control plane of the whole machine:
NETDEV WATCHDOG: ens6f1 (qede): transmit queue 2 timed out 10226 ms
[qede_tx_timeout:586(ens6f1)]TX timeout on queue 2!
[qede_recovery_handler:2665(ens6f0)]Starting a recovery process
The recovery path deadlocks on the driver's own mutex:
qede_sp_task
rtnl_lock()
mutex_lock(&edev->qede_lock) <- taken
qede_recovery_handler
qede_load
udp_tunnel_nic_reset_ntf
__udp_tunnel_nic_device_sync
info->sync_table == qede_udp_tunnel_sync
mutex_lock(&edev->qede_lock) <- same task: deadlock
The mutex is not recursive, so the kworker blocks on itself with
rtnl_lock held, and neither lock is ever released. Every task that
calls rtnl_lock() afterwards (ip, ovs-vswitchd, lldpad, IPv6
addrconf, sshd) blocks forever while the node still answers ping.
In a vmcore from an affected production node rtnl_mutex.owner
decodes to the very kworker blocked at the innermost mutex_lock()
above.
Re-sync the tunnel ports from qede_sp_task() after the internal lock
is dropped, still under rtnl_lock as the udp_tunnel API requires.
This mirrors qede_open(), which calls udp_tunnel_nic_reset_ntf()
under rtnl without the internal lock.
qede_recovery_handler() now returns whether it has successfully
reloaded an open device, and the caller re-syncs the ports only in
that case. This keeps the old gating exactly: a device that was down
or a failed recovery returns false, as those paths never reached the
udp_tunnel_nic_reset_ntf() call before either.
This was the only user of the qede_lock()/qede_unlock() helpers, so
remove them. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free in __close_file_table_ids()
A ksmbd_file can remain alive after logical close while another session
holds a temporary reference obtained through ksmbd_lookup_fd_inode().
ksmbd_close_fd() currently marks the file closed and drops the idr-owned
reference, but leaves the pointer published in the closing session's idr
until the final reference is dropped.
If the foreign holder performs the final ksmbd_fd_put(), __put_fd_final()
supplies the foreign session's file table to __ksmbd_close_fd(). The object
is then freed without being removed from its owner's idr, and the owner
session later dereferences the stale pointer during file-table teardown.
Remove the volatile id from the owner's idr while ksmbd_close_fd() still
holds that table's lock, and clear volatile_id before dropping
the idr-owned reference. A later foreign final put then only performs
physical destruction and cannot remove the object from the wrong table. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: use memcmp() to compare ClientGUIDs
ClientGUID is a fixed-size binary value and can contain embedded NUL
bytes. strncmp() stops comparing at the first NUL byte, so different
ClientGUID values can incorrectly be treated as equal.
Use memcmp() in SMB3 multichannel session binding and
FSCTL_VALIDATE_NEGOTIATE_INFO to compare all SMB2_CLIENT_GUID_SIZE
bytes. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/iommufd: Fix IOPF group ownership UAF
iopf_group_alloc() links each last-page IOPF group into the generic IOPF
pending list before invoking the domain fault handler.
iommufd_fault_iopf_handler() also queued an accepted group in the
IOMMUFD deliver list without removing it from the generic pending list.
When detach or HWPT replacement drops the device's IOPF reference count
to zero, an IOMMU driver may call iopf_queue_remove_device(). That
function responds to and frees groups through the generic pending list
without removing the same groups from IOMMUFD's deliver list or response
xarray. A later read, response, or cleanup can then access the freed
group and cause a UAF.
Fix this by dequeuing an accepted group from the generic pending list
before IOMMUFD queues it for userspace response.
Make iopf_group_response() send a response regardless of pending-list
membership, so the dequeued group can still be completed by IOMMUFD. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: devicetree: don't free uninitialized dev_name on error path
dt_remember_or_free_map() duplicates dev_name for each map entry. If
kstrdup_const() fails, dt_free_map() frees dev_name in all num_maps
entries, including entries that have not been initialized.
Some pinctrl drivers, including pinctrl-imx, allocate the map with
kmalloc() and leave dev_name for the core to initialize. The untouched
entries therefore contain uninitialized data which is passed to
kfree_const().
Reproduced on qemu's mcimx6ul-evk (pinctrl-imx) with failslab injection
while binding the pinctrl-consuming device, under KASAN:
BUG: KASAN: double-free in dt_free_map+0x34/0xa4
Free of addr c425a900 by task init/1
kfree from dt_free_map+0x34/0xa4
dt_free_map from dt_remember_or_free_map+0x184/0x198
dt_remember_or_free_map from pinctrl_dt_to_map+0x33c/0x4c8
pinctrl_dt_to_map from create_pinctrl+0x9c/0x5c0
Initialize all dev_name fields to NULL before duplicating the device
name, making the full-map cleanup safe after a partial failure. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: fix list corruption in allocate_file_region_entries()
allocate_file_region_entries() tops up resv->region_cache with freshly
allocated file_region descriptors. The allocation uses GFP_KERNEL, so
resv->lock is dropped around it: the new entries are gathered on a
stack-local list head, allocated_regions, and spliced into
resv->region_cache once the lock is re-acquired.
The splice used list_splice(), which moves the entries but does not
re-initialize the source head, so allocated_regions is left pointing at an
entry that now lives on resv->region_cache. The top-up runs in a while
loop that re-checks the cache deficit after re-acquiring the lock. For a
shared mapping the resv_map is shared by every mapper of the hugetlbfs
inode, so a concurrent region_chg()/region_add()/region_del() on the same
resv_map can consume cache entries during the unlocked window and force a
second iteration. That iteration calls list_add() on the stale head and
corrupts the list; with CONFIG_DEBUG_LIST the __list_add_valid() check
trips:
list_add corruption. next->prev should be prev (ffffc900011ff7f8),
but was ffff88814c281460. (next=ffff88814c545640).
kernel BUG at lib/list_debug.c:31!
allocate_file_region_entries+0x191/0x420
region_chg+0x267/0x300
hugetlb_reserve_pages+0x387/0xc80
hugetlbfs_file_mmap+0x2ce/0x3f0
mmap_region+0x1348/0x1a80
do_mmap+0x85e/0xb90
vm_mmap_pgoff+0x18c/0x330
ksys_mmap_pgoff+0x2a1/0x3e0
do_syscall_64+0xd7/0x420
Without CONFIG_DEBUG_LIST the bad list_add() silently links a kernel-stack
address into resv->region_cache, leading to later use-after-free.
This was observed as a real host panic on a dense KVM host where a QEMU
guest-RAM hugetlbfs file was mapped MAP_SHARED by both QEMU and a separate
SPDK/DPDK vhost-user target, generating concurrent region_* traffic on one
shared resv_map.
Use list_splice_init() so the source head is re-initialized empty after
each splice, making the retry loop safe. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Cancel delayed I/O APIC EOI handling before destroying vCPUs
Cancel (and flush) the I/O APIC's delayed EOI handling work during the
"pre VM destroy" phase, before vCPUs are destroyed, as processing the EOI
broadcast will inject another IRQ if the line is asserted, i.e. will try
to deliver an IRQ to the target vCPU(s). Canceling the work after vCPUs
are destroyed leads to UAF if the delayed work is processed after vCPUs are
destroyed.
BUG: KASAN: slab-use-after-free in __kvm_irq_delivery_to_apic_fast+0x9bf/0xa20 arch/x86/kvm/lapic.c:1250
Read of size 8 at addr ffff8880499abea0 by task kworker/1:2/1218
CPU: 1 UID: 0 PID: 1218 Comm: kworker/1:2 Not tainted 7.1.0-rc7 #5 PREEMPT(lazy)
Hardware name: QEMU Ubuntu 25.10 PC v2 (i440FX + PIIX, + 10.1 machine, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Workqueue: events kvm_ioapic_eoi_inject_work
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94
dump_stack_lvl+0x100/0x190 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378
print_report+0x139/0x4ad mm/kasan/report.c:482
kasan_report+0xe4/0x1d0 mm/kasan/report.c:595
__kvm_irq_delivery_to_apic_fast+0x9bf/0xa20 arch/x86/kvm/lapic.c:1250
__kvm_irq_delivery_to_apic+0xd8/0xbf0 arch/x86/kvm/lapic.c:1345
kvm_irq_delivery_to_apic arch/x86/kvm/lapic.h:129
ioapic_service+0x308/0x590 arch/x86/kvm/ioapic.c:492
kvm_ioapic_eoi_inject_work+0x13c/0x190 arch/x86/kvm/ioapic.c:532
process_one_work+0xa59/0x19a0 kernel/workqueue.c:3314
process_scheduled_works kernel/workqueue.c:3397
worker_thread+0x5eb/0xe50 kernel/workqueue.c:3478
kthread+0x370/0x450 kernel/kthread.c:436
ret_from_fork+0x72b/0xd30 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
Note, the VM is unreachable once kvm_destroy_vm() starts, and scheduling
new work via kvm_ioapic_send_eoi() can only be done via KVM_RUN, i.e.
requires a live vCPU.
Alternatively, KVM could simply destroy the I/O APIC during the "pre" phase
of VM destruction, but that gets more than a bit sketchy as KVM expects the
I/O APIC to exist if ioapic_in_kernel() is true, and nested virtualization
in particular has a bad habit of touching VM-scope state during vCPU
destruction. E.g. attempting to free the PIC during the pre phase would
lead to a NULL pointer dereference in kvm_cpu_has_extint(), and it's not
hard to imagine the I/O APIC having a similar flaw. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Update x2APIC MSR intercepts if AVIC is inhibited while L2 is active
Always update x2APIC MSR intercepts for L1 when AVIC is deactivated, even
if L2 is active and KVM is using a separate MSR bitmap to run L2. If AVIC
is fully enabled prior to running L2, and is then inhibited while L2 is
active (for a VM-scoped inhibit), then KVM will run L1 with AVIC disabled,
but with x2APIC MSR intercepts disabled, i.e. will allow L1 to read most of
the host's APIC state, send arbitrary interrupts, change task priority, and
ultimately trivially DoS the host.
E.g. sending a self-IPI in L1 on HYPERV_REENLIGHTENMENT_VECTOR, 0xee, with
CONFIG_HYPERV=n in the host kernel as a "safe" PoC, yields:
Spurious interrupt (vector 0xee) on CPU#425. Acked
And hacking KVM to abuse kvm_set_posted_intr_wakeup_handler() to register a
handler and WARN on POSTED_INTR_WAKEUP_VECTOR yields:
------------[ cut here ]------------
WARNING: arch/x86/kvm/svm/svm.c:5594 at pi_wakeup_handler+0x9/0x10 [kvm_amd], CPU#156: nested_x2apic_t/316940
CPU: 156 UID: 0 PID: 316940 Comm: nested_x2apic_t Tainted: G S U
Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER
Hardware name: Google Astoria-Turin/astoria, BIOS 0.20260209.0-0 02/09/2026
RIP: 0010:pi_wakeup_handler+0x9/0x10 [kvm_amd]
Call Trace:
<IRQ>
sysvec_kvm_posted_intr_wakeup_ipi+0x64/0x80
</IRQ>
<TASK>
asm_sysvec_kvm_posted_intr_wakeup_ipi+0x1a/0x20
RIP: 0010:vcpu_run+0x1430/0x1e40 [kvm]
kvm_arch_vcpu_ioctl_run+0x2c1/0x600 [kvm]
kvm_vcpu_ioctl+0x580/0x6b0 [kvm]
__se_sys_ioctl+0x6d/0xb0
do_syscall_64+0x10a/0x480
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x46ff4b
</TASK>
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: pci: Reject adapter interrupt forwarding if already enabled
The MPCIFC instruction doesn't allow registering adapter interrupts without
first unregistering. So reject any request to enable interrupt forwarding
if its already enabled for the zPCI device. This also fixes overwriting and
thus leaking resources when the ioctl is called multiple times for the same
device. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: pci: Fix memory accounting for pinned/unpinned pages
The account_mem() and unaccount_mem() functions call get_uid() which
increments the reference count of struct user_struct on every invocation.
But we don't decrement the count by calling free_uid(). It also
accounted/unaccounted the pages against the current->mm. But its possible
the unaccount_mem() can be called from a different process context than the
one that originally pinned the pages.
Let's fix this by storing the pinning process user_struct and mm_struct
when accounting for pinned pages, and subsequently free these resources
when the pages are unpinned.
[borntraeger@linux.ibm.com: Fixed whitespace] |
| In the Linux kernel, the following vulnerability has been resolved:
dibs: fix use-after-free of dmb_node in loopback attach/detach/unregister
dibs_lo_attach_dmb(), dibs_lo_detach_dmb() and dibs_lo_unregister_dmb()
look up the dmb_node under dmb_ht_lock, drop the lock and only then
operate on the node's refcount. Nothing keeps the node alive across
that window: __dibs_lo_unregister_dmb() removes the node from the hash
table under the write lock and immediately frees it.
A concurrent final put can therefore free the node between the lookup
and the refcount operation:
CPU0 (attach) CPU1 (owner unregisters)
read_lock_bh(&dmb_ht_lock)
find dmb_node (refcnt == 1)
read_unlock_bh(&dmb_ht_lock)
refcount_dec_and_test() 1 -> 0
write_lock_bh(&dmb_ht_lock)
hash_del(&dmb_node->list)
write_unlock_bh(&dmb_ht_lock)
kfree(dmb_node)
refcount_inc_not_zero(&dmb_node->refcnt) <-- use-after-free
The same window exists for the refcount_dec_and_test() calls in the
detach and unregister paths.
Close the race structurally by making hash table membership and the
refcount transitions atomic with respect to each other:
- Perform the final refcount_dec_and_test() and hash_del() in a single
dmb_ht_lock write-side critical section, in both the unregister and
the detach path. Freeing the node still happens after the lock is
dropped, which is safe because a node whose refcount reached zero has
left the hash table and can no longer be found.
- This establishes the invariant that any node found in the hash table
holds at least one reference, and that the final reference can only
be dropped under the write lock. dibs_lo_attach_dmb() can thus take
its reference with a plain refcount_inc() while still holding the
read lock; refcount_inc_not_zero() is no longer needed.
__dibs_lo_unregister_dmb() no longer touches the hash table and is
renamed to dibs_lo_free_dmb() accordingly.
Note: commit cc21191b584c ("dibs: Move data path to dibs layer") moved
the code to its current location; the race was introduced earlier by
commit c3a910f2380f ("net/smc: implement DMB-merged operations of
loopback-ism").
Tested SMC-D via ISM and dibs loopback. |
| In the Linux kernel, the following vulnerability has been resolved:
audit: fix potential use-after-free in audit_del_rule()
`audit_del_rule()` destroys `e->rule.exe` via `audit_remove_mark_rule()`
before unlinking the rule from RCU-visible filter lists and waiting for a
grace period. Concurrent readers in `audit_filter()` and
`audit_filter_rules()` still dereference `e->rule.exe`, while the fsnotify
mark can be freed on an independent lifetime path. This creates a
use-after-free window during rule deletion.
Fix this by unlinking the rule from the RCU-visible lists and invoking
`synchronize_rcu()` before calling `audit_remove_mark_rule()` (and other
rule removal helpers). This ensures that all existing RCU readers have
exited the critical section before any underlying resources are destroyed. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: mgmt: fix pending command UAF in EIR updates
MGMT_OP_SET_LOCAL_NAME is handled asynchronously on powered controllers
and can run set_name_sync(). When the controller is BR/EDR capable,
set_name_sync() updates the local name and then rebuilds EIR data through
eir_create(). The EIR builder walks hdev->uuids, but the UUID list can
be changed and entries can be freed by MGMT_OP_ADD_UUID and
MGMT_OP_REMOVE_UUID.
pending_eir_or_class() is meant to serialize management commands that
can change EIR or the class of device, but it did not include
MGMT_OP_SET_LOCAL_NAME. In addition, it walked hdev->mgmt_pending
without hdev->mgmt_pending_lock even though pending commands are added
and removed under that mutex. A racing command completion can therefore
remove and free a pending command while pending_eir_or_class() is still
inspecting it, leading to a use-after-free in the pending-command list or
allowing a local name update to rebuild EIR while UUID entries are being
removed.
Take hdev->mgmt_pending_lock while scanning hdev->mgmt_pending and treat
MGMT_OP_SET_LOCAL_NAME as an EIR/class-affecting pending command on the
powered asynchronous path. Check for a conflicting pending command before
copying the new short name so a rejected SET_LOCAL_NAME request does not
modify hdev->short_name. |
