| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: don't leak a link on AP removal
Release the link mapping resource in AP removal. This impacted devices
that do not support the MLD API (9260 and down).
On those devices, we couldn't start the AP again after the AP has been
already started and stopped. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86/amd/pmc: Detect when STB is not available
Loading the amd_pmc module as:
amd_pmc enable_stb=1
...can result in the following messages in the kernel ring buffer:
amd_pmc AMDI0009:00: SMU cmd failed. err: 0xff
ioremap on RAM at 0x0000000000000000 - 0x0000000000ffffff
WARNING: CPU: 10 PID: 2151 at arch/x86/mm/ioremap.c:217 __ioremap_caller+0x2cd/0x340
Further debugging reveals that this occurs when the requests for
S2D_PHYS_ADDR_LOW and S2D_PHYS_ADDR_HIGH return a value of 0,
indicating that the STB is inaccessible. To prevent the ioremap
warning and provide clarity to the user, handle the invalid address
and display an error message. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Be stricter about IO mapping flags
The current panthor_device_mmap_io() implementation has two issues:
1. For mapping DRM_PANTHOR_USER_FLUSH_ID_MMIO_OFFSET,
panthor_device_mmap_io() bails if VM_WRITE is set, but does not clear
VM_MAYWRITE. That means userspace can use mprotect() to make the mapping
writable later on. This is a classic Linux driver gotcha.
I don't think this actually has any impact in practice:
When the GPU is powered, writes to the FLUSH_ID seem to be ignored; and
when the GPU is not powered, the dummy_latest_flush page provided by the
driver is deliberately designed to not do any flushes, so the only thing
writing to the dummy_latest_flush could achieve would be to make *more*
flushes happen.
2. panthor_device_mmap_io() does not block MAP_PRIVATE mappings (which are
mappings without the VM_SHARED flag).
MAP_PRIVATE in combination with VM_MAYWRITE indicates that the VMA has
copy-on-write semantics, which for VM_PFNMAP are semi-supported but
fairly cursed.
In particular, in such a mapping, the driver can only install PTEs
during mmap() by calling remap_pfn_range() (because remap_pfn_range()
wants to **store the physical address of the mapped physical memory into
the vm_pgoff of the VMA**); installing PTEs later on with a fault
handler (as panthor does) is not supported in private mappings, and so
if you try to fault in such a mapping, vmf_insert_pfn_prot() splats when
it hits a BUG() check.
Fix it by clearing the VM_MAYWRITE flag (userspace writing to the FLUSH_ID
doesn't make sense) and requiring VM_SHARED (copy-on-write semantics for
the FLUSH_ID don't make sense).
Reproducers for both scenarios are in the notes of my patch on the mailing
list; I tested that these bugs exist on a Rock 5B machine.
Note that I only compile-tested the patch, I haven't tested it; I don't
have a working kernel build setup for the test machine yet. Please test it
before applying it. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: fix fault at system suspend if device was already runtime suspended
If the device was already runtime suspended then during system suspend
we cannot access the device registers else it will crash.
Also we cannot access any registers after dwc3_core_exit() on some
platforms so move the dwc3_enable_susphy() call to the top. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: qcom: scm: fix a NULL-pointer dereference
Some SCM calls can be invoked with __scm being NULL (the driver may not
have been and will not be probed as there's no SCM entry in device-tree).
Make sure we don't dereference a NULL pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
nfs: Fix KMSAN warning in decode_getfattr_attrs()
Fix the following KMSAN warning:
CPU: 1 UID: 0 PID: 7651 Comm: cp Tainted: G B
Tainted: [B]=BAD_PAGE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009)
=====================================================
=====================================================
BUG: KMSAN: uninit-value in decode_getfattr_attrs+0x2d6d/0x2f90
decode_getfattr_attrs+0x2d6d/0x2f90
decode_getfattr_generic+0x806/0xb00
nfs4_xdr_dec_getattr+0x1de/0x240
rpcauth_unwrap_resp_decode+0xab/0x100
rpcauth_unwrap_resp+0x95/0xc0
call_decode+0x4ff/0xb50
__rpc_execute+0x57b/0x19d0
rpc_execute+0x368/0x5e0
rpc_run_task+0xcfe/0xee0
nfs4_proc_getattr+0x5b5/0x990
__nfs_revalidate_inode+0x477/0xd00
nfs_access_get_cached+0x1021/0x1cc0
nfs_do_access+0x9f/0xae0
nfs_permission+0x1e4/0x8c0
inode_permission+0x356/0x6c0
link_path_walk+0x958/0x1330
path_lookupat+0xce/0x6b0
filename_lookup+0x23e/0x770
vfs_statx+0xe7/0x970
vfs_fstatat+0x1f2/0x2c0
__se_sys_newfstatat+0x67/0x880
__x64_sys_newfstatat+0xbd/0x120
x64_sys_call+0x1826/0x3cf0
do_syscall_64+0xd0/0x1b0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The KMSAN warning is triggered in decode_getfattr_attrs(), when calling
decode_attr_mdsthreshold(). It appears that fattr->mdsthreshold is not
initialized.
Fix the issue by initializing fattr->mdsthreshold to NULL in
nfs_fattr_init(). |
| In the Linux kernel, the following vulnerability has been resolved:
mm/slab: fix warning caused by duplicate kmem_cache creation in kmem_buckets_create
Commit b035f5a6d852 ("mm: slab: reduce the kmalloc() minimum alignment
if DMA bouncing possible") reduced ARCH_KMALLOC_MINALIGN to 8 on arm64.
However, with KASAN_HW_TAGS enabled, arch_slab_minalign() becomes 16.
This causes kmalloc_caches[*][8] to be aliased to kmalloc_caches[*][16],
resulting in kmem_buckets_create() attempting to create a kmem_cache for
size 16 twice. This duplication triggers warnings on boot:
[ 2.325108] ------------[ cut here ]------------
[ 2.325135] kmem_cache of name 'memdup_user-16' already exists
[ 2.325783] WARNING: CPU: 0 PID: 1 at mm/slab_common.c:107 __kmem_cache_create_args+0xb8/0x3b0
[ 2.327957] Modules linked in:
[ 2.328550] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.0-rc5mm-unstable-arm64+ #12
[ 2.328683] Hardware name: QEMU QEMU Virtual Machine, BIOS 2024.02-2 03/11/2024
[ 2.328790] pstate: 61000009 (nZCv daif -PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[ 2.328911] pc : __kmem_cache_create_args+0xb8/0x3b0
[ 2.328930] lr : __kmem_cache_create_args+0xb8/0x3b0
[ 2.328942] sp : ffff800083d6fc50
[ 2.328961] x29: ffff800083d6fc50 x28: f2ff0000c1674410 x27: ffff8000820b0598
[ 2.329061] x26: 000000007fffffff x25: 0000000000000010 x24: 0000000000002000
[ 2.329101] x23: ffff800083d6fce8 x22: ffff8000832222e8 x21: ffff800083222388
[ 2.329118] x20: f2ff0000c1674410 x19: f5ff0000c16364c0 x18: ffff800083d80030
[ 2.329135] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 2.329152] x14: 0000000000000000 x13: 0a73747369786520 x12: 79646165726c6120
[ 2.329169] x11: 656820747563205b x10: 2d2d2d2d2d2d2d2d x9 : 0000000000000000
[ 2.329194] x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000
[ 2.329210] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
[ 2.329226] x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000
[ 2.329291] Call trace:
[ 2.329407] __kmem_cache_create_args+0xb8/0x3b0
[ 2.329499] kmem_buckets_create+0xfc/0x320
[ 2.329526] init_user_buckets+0x34/0x78
[ 2.329540] do_one_initcall+0x64/0x3c8
[ 2.329550] kernel_init_freeable+0x26c/0x578
[ 2.329562] kernel_init+0x3c/0x258
[ 2.329574] ret_from_fork+0x10/0x20
[ 2.329698] ---[ end trace 0000000000000000 ]---
[ 2.403704] ------------[ cut here ]------------
[ 2.404716] kmem_cache of name 'msg_msg-16' already exists
[ 2.404801] WARNING: CPU: 2 PID: 1 at mm/slab_common.c:107 __kmem_cache_create_args+0xb8/0x3b0
[ 2.404842] Modules linked in:
[ 2.404971] CPU: 2 UID: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.12.0-rc5mm-unstable-arm64+ #12
[ 2.405026] Tainted: [W]=WARN
[ 2.405043] Hardware name: QEMU QEMU Virtual Machine, BIOS 2024.02-2 03/11/2024
[ 2.405057] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 2.405079] pc : __kmem_cache_create_args+0xb8/0x3b0
[ 2.405100] lr : __kmem_cache_create_args+0xb8/0x3b0
[ 2.405111] sp : ffff800083d6fc50
[ 2.405115] x29: ffff800083d6fc50 x28: fbff0000c1674410 x27: ffff8000820b0598
[ 2.405135] x26: 000000000000ffd0 x25: 0000000000000010 x24: 0000000000006000
[ 2.405153] x23: ffff800083d6fce8 x22: ffff8000832222e8 x21: ffff800083222388
[ 2.405169] x20: fbff0000c1674410 x19: fdff0000c163d6c0 x18: ffff800083d80030
[ 2.405185] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 2.405201] x14: 0000000000000000 x13: 0a73747369786520 x12: 79646165726c6120
[ 2.405217] x11: 656820747563205b x10: 2d2d2d2d2d2d2d2d x9 : 0000000000000000
[ 2.405233] x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000
[ 2.405248] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
[ 2.405271] x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000
[ 2.405287] Call trace:
[ 2
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: fix idpf_vc_core_init error path
In an event where the platform running the device control plane
is rebooted, reset is detected on the driver. It releases
all the resources and waits for the reset to complete. Once the
reset is done, it tries to build the resources back. At this
time if the device control plane is not yet started, then
the driver timeouts on the virtchnl message and retries to
establish the mailbox again.
In the retry flow, mailbox is deinitialized but the mailbox
workqueue is still alive and polling for the mailbox message.
This results in accessing the released control queue leading to
null-ptr-deref. Fix it by unrolling the work queue cancellation
and mailbox deinitialization in the reverse order which they got
initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
media: dvbdev: prevent the risk of out of memory access
The dvbdev contains a static variable used to store dvb minors.
The behavior of it depends if CONFIG_DVB_DYNAMIC_MINORS is set
or not. When not set, dvb_register_device() won't check for
boundaries, as it will rely that a previous call to
dvb_register_adapter() would already be enforcing it.
On a similar way, dvb_device_open() uses the assumption
that the register functions already did the needed checks.
This can be fragile if some device ends using different
calls. This also generate warnings on static check analysers
like Coverity.
So, add explicit guards to prevent potential risk of OOM issues. |
| In the Linux kernel, the following vulnerability has been resolved:
media: mgb4: protect driver against spectre
Frequency range is set from sysfs via frequency_range_store(),
being vulnerable to spectre, as reported by smatch:
drivers/media/pci/mgb4/mgb4_cmt.c:231 mgb4_cmt_set_vin_freq_range() warn: potential spectre issue 'cmt_vals_in' [r]
drivers/media/pci/mgb4/mgb4_cmt.c:238 mgb4_cmt_set_vin_freq_range() warn: possible spectre second half. 'reg_set'
Fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: prevent NULL pointer dereference if ATIF is not supported
acpi_evaluate_object() may return AE_NOT_FOUND (failure), which
would result in dereferencing buffer.pointer (obj) while being NULL.
Although this case may be unrealistic for the current code, it is
still better to protect against possible bugs.
Bail out also when status is AE_NOT_FOUND.
This fixes 1 FORWARD_NULL issue reported by Coverity
Report: CID 1600951: Null pointer dereferences (FORWARD_NULL)
(cherry picked from commit 91c9e221fe2553edf2db71627d8453f083de87a1) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: Fix response handling in iwl_mvm_send_recovery_cmd()
1. The size of the response packet is not validated.
2. The response buffer is not freed.
Resolve these issues by switching to iwl_mvm_send_cmd_status(),
which handles both size validation and frees the buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: TSO: Fix unbalanced DMA map/unmap for non-paged SKB data
In case the non-paged data of a SKB carries protocol header and protocol
payload to be transmitted on a certain platform that the DMA AXI address
width is configured to 40-bit/48-bit, or the size of the non-paged data
is bigger than TSO_MAX_BUFF_SIZE on a certain platform that the DMA AXI
address width is configured to 32-bit, then this SKB requires at least
two DMA transmit descriptors to serve it.
For example, three descriptors are allocated to split one DMA buffer
mapped from one piece of non-paged data:
dma_desc[N + 0],
dma_desc[N + 1],
dma_desc[N + 2].
Then three elements of tx_q->tx_skbuff_dma[] will be allocated to hold
extra information to be reused in stmmac_tx_clean():
tx_q->tx_skbuff_dma[N + 0],
tx_q->tx_skbuff_dma[N + 1],
tx_q->tx_skbuff_dma[N + 2].
Now we focus on tx_q->tx_skbuff_dma[entry].buf, which is the DMA buffer
address returned by DMA mapping call. stmmac_tx_clean() will try to
unmap the DMA buffer _ONLY_IF_ tx_q->tx_skbuff_dma[entry].buf
is a valid buffer address.
The expected behavior that saves DMA buffer address of this non-paged
data to tx_q->tx_skbuff_dma[entry].buf is:
tx_q->tx_skbuff_dma[N + 0].buf = NULL;
tx_q->tx_skbuff_dma[N + 1].buf = NULL;
tx_q->tx_skbuff_dma[N + 2].buf = dma_map_single();
Unfortunately, the current code misbehaves like this:
tx_q->tx_skbuff_dma[N + 0].buf = dma_map_single();
tx_q->tx_skbuff_dma[N + 1].buf = NULL;
tx_q->tx_skbuff_dma[N + 2].buf = NULL;
On the stmmac_tx_clean() side, when dma_desc[N + 0] is closed by the
DMA engine, tx_q->tx_skbuff_dma[N + 0].buf is a valid buffer address
obviously, then the DMA buffer will be unmapped immediately.
There may be a rare case that the DMA engine does not finish the
pending dma_desc[N + 1], dma_desc[N + 2] yet. Now things will go
horribly wrong, DMA is going to access a unmapped/unreferenced memory
region, corrupted data will be transmited or iommu fault will be
triggered :(
In contrast, the for-loop that maps SKB fragments behaves perfectly
as expected, and that is how the driver should do for both non-paged
data and paged frags actually.
This patch corrects DMA map/unmap sequences by fixing the array index
for tx_q->tx_skbuff_dma[entry].buf when assigning DMA buffer address.
Tested and verified on DWXGMAC CORE 3.20a |
| In the Linux kernel, the following vulnerability has been resolved:
drm/mediatek: Fix potential NULL dereference in mtk_crtc_destroy()
In mtk_crtc_create(), if the call to mbox_request_channel() fails then we
set the "mtk_crtc->cmdq_client.chan" pointer to NULL. In that situation,
we do not call cmdq_pkt_create().
During the cleanup, we need to check if the "mtk_crtc->cmdq_client.chan"
is NULL first before calling cmdq_pkt_destroy(). Calling
cmdq_pkt_destroy() is unnecessary if we didn't call cmdq_pkt_create() and
it will result in a NULL pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: fix 6 GHz scan construction
If more than 255 colocated APs exist for the set of all
APs found during 2.4/5 GHz scanning, then the 6 GHz scan
construction will loop forever since the loop variable
has type u8, which can never reach the number found when
that's bigger than 255, and is stored in a u32 variable.
Also move it into the loops to have a smaller scope.
Using a u32 there is fine, we limit the number of APs in
the scan list and each has a limit on the number of RNR
entries due to the frame size. With a limit of 1000 scan
results, a frame size upper bound of 4096 (really it's
more like ~2300) and a TBTT entry size of at least 11,
we get an upper bound for the number of ~372k, well in
the bounds of a u32. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/rw: fix missing NOWAIT check for O_DIRECT start write
When io_uring starts a write, it'll call kiocb_start_write() to bump the
super block rwsem, preventing any freezes from happening while that
write is in-flight. The freeze side will grab that rwsem for writing,
excluding any new writers from happening and waiting for existing writes
to finish. But io_uring unconditionally uses kiocb_start_write(), which
will block if someone is currently attempting to freeze the mount point.
This causes a deadlock where freeze is waiting for previous writes to
complete, but the previous writes cannot complete, as the task that is
supposed to complete them is blocked waiting on starting a new write.
This results in the following stuck trace showing that dependency with
the write blocked starting a new write:
task:fio state:D stack:0 pid:886 tgid:886 ppid:876
Call trace:
__switch_to+0x1d8/0x348
__schedule+0x8e8/0x2248
schedule+0x110/0x3f0
percpu_rwsem_wait+0x1e8/0x3f8
__percpu_down_read+0xe8/0x500
io_write+0xbb8/0xff8
io_issue_sqe+0x10c/0x1020
io_submit_sqes+0x614/0x2110
__arm64_sys_io_uring_enter+0x524/0x1038
invoke_syscall+0x74/0x268
el0_svc_common.constprop.0+0x160/0x238
do_el0_svc+0x44/0x60
el0_svc+0x44/0xb0
el0t_64_sync_handler+0x118/0x128
el0t_64_sync+0x168/0x170
INFO: task fsfreeze:7364 blocked for more than 15 seconds.
Not tainted 6.12.0-rc5-00063-g76aaf945701c #7963
with the attempting freezer stuck trying to grab the rwsem:
task:fsfreeze state:D stack:0 pid:7364 tgid:7364 ppid:995
Call trace:
__switch_to+0x1d8/0x348
__schedule+0x8e8/0x2248
schedule+0x110/0x3f0
percpu_down_write+0x2b0/0x680
freeze_super+0x248/0x8a8
do_vfs_ioctl+0x149c/0x1b18
__arm64_sys_ioctl+0xd0/0x1a0
invoke_syscall+0x74/0x268
el0_svc_common.constprop.0+0x160/0x238
do_el0_svc+0x44/0x60
el0_svc+0x44/0xb0
el0t_64_sync_handler+0x118/0x128
el0t_64_sync+0x168/0x170
Fix this by having the io_uring side honor IOCB_NOWAIT, and only attempt a
blocking grab of the super block rwsem if it isn't set. For normal issue
where IOCB_NOWAIT would always be set, this returns -EAGAIN which will
have io_uring core issue a blocking attempt of the write. That will in
turn also get completions run, ensuring forward progress.
Since freezing requires CAP_SYS_ADMIN in the first place, this isn't
something that can be triggered by a regular user. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/hdcp: Add encoder check in intel_hdcp_get_capability
Sometimes during hotplug scenario or suspend/resume scenario encoder is
not always initialized when intel_hdcp_get_capability add
a check to avoid kernel null pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/hdcp: Add encoder check in hdcp2_get_capability
Add encoder check in intel_hdcp2_get_capability to avoid
null pointer error. |
| In the Linux kernel, the following vulnerability has been resolved:
slub/kunit: fix a WARNING due to unwrapped __kmalloc_cache_noprof
'modprobe slub_kunit' will have a warning as shown below. The root cause
is that __kmalloc_cache_noprof was directly used, which resulted in no
alloc_tag being allocated. This caused current->alloc_tag to be null,
leading to a warning in alloc_tag_add_check.
Let's add an alloc_hook layer to __kmalloc_cache_noprof specifically
within lib/slub_kunit.c, which is the only user of this internal slub
function outside kmalloc implementation itself.
[58162.947016] WARNING: CPU: 2 PID: 6210 at
./include/linux/alloc_tag.h:125 alloc_tagging_slab_alloc_hook+0x268/0x27c
[58162.957721] Call trace:
[58162.957919] alloc_tagging_slab_alloc_hook+0x268/0x27c
[58162.958286] __kmalloc_cache_noprof+0x14c/0x344
[58162.958615] test_kmalloc_redzone_access+0x50/0x10c [slub_kunit]
[58162.959045] kunit_try_run_case+0x74/0x184 [kunit]
[58162.959401] kunit_generic_run_threadfn_adapter+0x2c/0x4c [kunit]
[58162.959841] kthread+0x10c/0x118
[58162.960093] ret_from_fork+0x10/0x20
[58162.960363] ---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix crash on probe for DPLL enabled E810 LOM
The E810 Lan On Motherboard (LOM) design is vendor specific. Intel
provides the reference design, but it is up to vendor on the final
product design. For some cases, like Linux DPLL support, the static
values defined in the driver does not reflect the actual LOM design.
Current implementation of dpll pins is causing the crash on probe
of the ice driver for such DPLL enabled E810 LOM designs:
WARNING: (...) at drivers/dpll/dpll_core.c:495 dpll_pin_get+0x2c4/0x330
...
Call Trace:
<TASK>
? __warn+0x83/0x130
? dpll_pin_get+0x2c4/0x330
? report_bug+0x1b7/0x1d0
? handle_bug+0x42/0x70
? exc_invalid_op+0x18/0x70
? asm_exc_invalid_op+0x1a/0x20
? dpll_pin_get+0x117/0x330
? dpll_pin_get+0x2c4/0x330
? dpll_pin_get+0x117/0x330
ice_dpll_get_pins.isra.0+0x52/0xe0 [ice]
...
The number of dpll pins enabled by LOM vendor is greater than expected
and defined in the driver for Intel designed NICs, which causes the crash.
Prevent the crash and allow generic pin initialization within Linux DPLL
subsystem for DPLL enabled E810 LOM designs.
Newly designed solution for described issue will be based on "per HW
design" pin initialization. It requires pin information dynamically
acquired from the firmware and is already in progress, planned for
next-tree only. |
