| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Check load-acquire src ptr type before the load
check_atomic_load() calls check_load_mem() before atomic_ptr_type_ok().
For a load-acquire that fetches into its own source register (dst_reg ==
src_reg), check_load_mem() overwrites src_reg's type with the type of the
loaded value, so the subsequent atomic_ptr_type_ok() no longer sees the
source pointer and fails to reject the disallowed types (ctx, pkt,
flow_keys, sock).
Since bpf_convert_ctx_accesses() does not rewrite atomic loads, the raw
access to the underlying kernel object is left in place. The destination
type is taken from the ctx access itself, so a load-acquire of the sk
field of struct __sk_buff for example leaves the register typed as
PTR_TO_SOCK_COMMON_OR_NULL, which type_is_sk_pointer() does not match
either, while it actually holds unconverted struct sk_buff bytes. Once
the NULL check has passed this is a type confusion, not just a leak of
kernel data.
Validate src_reg with check_reg_arg() and check the source pointer type
with atomic_ptr_type_ok() before the load again, mirroring
check_atomic_rmw(). Out-of-range register numbers are already rejected
earlier by check_and_resolve_insns() (commit 503d21ef8eac ("bpf: Do
register range validation early")), and the only exemption there,
is_stack_arg_ldx(), requires BPF_LDX | BPF_MEM | BPF_DW and thus never
matches a BPF_ATOMIC insn. atomic_ptr_type_ok() can therefore not
dereference register state out of bounds, that is, the out-of-bounds
read addressed by the Fixes commit below does not reappear (as proven
also via selftest). |
| In the Linux kernel, the following vulnerability has been resolved:
md: remove REQ_NOWAIT support from raid1/10/456
REQ_NOWAIT support in md personalities that can block internally is
fundamentally incomplete. While reads can avoid some blocking paths,
write requests can still encounter cases where one mirror succeeds while
another returns -EAGAIN. At that point md cannot distinguish queue
pressure from a real device failure, so it can neither record a bad
block nor safely retry the write without REQ_NOWAIT, leaving mirrors
with divergent data.
Rather than continue advertising REQ_NOWAIT support for personalities
that cannot implement it correctly, remove it from raid1, raid10 and
raid456. Keep REQ_NOWAIT for linear and raid0, which only remap bios to
their underlying devices; stacked limits will still clear the feature if
any component device lacks REQ_NOWAIT support. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix overreads in ath11k_wmi_process_csa_switch_count_event()
There is no policy entry for WMI_TAG_PDEV_CSA_SWITCH_COUNT_STATUS_EVENT, so
the parse infrastructure does not enforce a minimum length for the event
struct. Additionally, the num_vdevs field is taken directly from firmware
and used as a loop bound over the vdev_ids array without checking that it
fits within the TLV payload. Either condition can cause an out-of-bounds
read.
Add a TLV policy entry for WMI_TAG_PDEV_CSA_SWITCH_COUNT_STATUS_EVENT so
the parse infrastructure enforces a minimum length for the fixed-size event
struct. Add a helper ath11k_wmi_tlv_data_len() to recover the payload
length of a parsed TLV from the header preceding its data pointer. Use it
in ath11k_wmi_process_csa_switch_count_event() to bound num_vdevs before
the loop.
Compile tested only. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix UAF in ODP init error-handling path
rxe_odp_mr_init_user() stores &umem_odp->umem in mr->umem before
calling rxe_odp_init_pages(). If rxe_odp_init_pages() fails,
rxe_odp_mr_init_user() releases umem_odp and returns an error.
rxe_reg_user_mr() then unwinds the error through rxe_cleanup(),
rxe_mr_cleanup(), ib_umem_release(mr->umem). There is an
IS_ERR_OR_NULL(umem) check at the start of ib_umem_release().
But since mr->umem is NOT reset to NULL in the error handling
path of rxe_odp_mr_init_user(), the check passes and it reads
already-freed fields like umem->is_dmabuf, causing UAF.
Fix the UAF by clearing mr->umem after releasing the failed
ODP umem so the MR cleanup path does not release it again. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hfi1: Propagate sdma_txinit_ahg() errors
set_txreq_header_ahg() ignores the return value of sdma_txinit_ahg().
If sdma_txinit_ahg() fails, it returns before initializing tx->txreq.
However, set_txreq_header_ahg() ignores the error and returns the AHG
change count, causing the caller to continue processing the request as
though initialization had succeeded.
Propagate sdma_txinit_ahg() failures to the caller and abort request
processing when initialization fails.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: asus-wmi: fix resource leaks on probe failure
During driver initialization in asus_wmi_add(), various subsystems are
registered sequentially. However, the error path labels are out of order
relative to the registration sequence.
Specifically:
1. If asus_wmi_custom_fan_curve_init() fails, the driver jumps to
fail_custom_fan_curve. Because this label is placed below fail_sysfs,
it bypasses the cleanup calls for the input device and sysfs groups,
which were successfully registered before, leaking those resources.
2. If asus_screenpad_init() fails, the driver jumps to fail_screenpad.
Because fail_screenpad is placed below fail_backlight, it bypasses the
cleanup calls for backlight and rfkill, leaking those resources.
Fix these resource leaks by reordering the error path labels in
asus_wmi_add() to match the exact reverse order of the resource
allocations. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/bpf: Replace ly instruction with llgf
cpu_nr is a 32 bit value and BPF_REG_0 is a 64 bit register, when ly loads
the cpu_nr into BPF_REG_0 it does not zero the upper bits, but llgf does. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/pm/powerplay: bounds-check voltage index in Vega10 lookup
vddInd, vddciInd and mvddInd from VBIOS-parsed tables index into vddc,
vddci and vddmem lookup tables without bounds checks across nine sites.
Return -EINVAL when any index is out of range. |
| The Mailchimp for WooCommerce WordPress plugin before 6.1.1 does not verify that the requesting user holds the required capability in the permission callback for several of its REST API routes, allowing unauthenticated users to reach administrator-oriented endpoints and trigger a persistent state change. |
| Argo Workflows versions 4.1.0 through 4.1.3 contain an authorization bypass vulnerability in ListArchivedWorkflows that fails to apply cluster-scoped access review when the metadata.namespace field selector uses the NotEquals operator. Attackers with namespace-scoped list permissions can use a negated namespace field selector to retrieve archived workflows from all other namespaces, exposing spec arguments, parameter values, and annotations. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: dwc: ep: Flush cached MSI write before unmapping the iATU
The MSI-X path already flushes any posted MSI-X write before tearing down
its iATU mapping. That was added by commit c22533c66cca ("PCI: dwc: ep:
Flush MSI-X write before unmapping its ATU entry") to make sure the write
reaches the Root Complex before the outbound window that translates it
disappears.
The MSI path has the same problem but no equivalent flush. When the
Endpoint driver caches an MSI target address and later observes that the
Root Complex has changed it, dw_pcie_ep_raise_msi_irq() unmaps the existing
iATU entry and reprograms it for the new address. Between the last MSI
writel() and the unmap there may still be a posted write sitting in the
fabric, and unmapping the iATU entry can drop or misroute that write.
Fix this by reading back from the mapped MSI window before the unmap. The
readback drains any posted MSI writes through the same iATU entry that
mapped them, which is the same logic the MSI-X path uses.
[mani: commit log] |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: ptrace: Keep 'orig_x0' in-sync with x0 on syscall entry
Commit e057b9477232 ("arm64: syscall: Ensure saved x0 is kept in-sync
with tracer updates") attempted to resolve a long-standing issue with
syscall entry tracing, where a tracer is able to manipulate the first
syscall argument without being subjected to seccomp or audit checking.
Unfortunately, that fix was incomplete [1], as it failed to update
'orig_x0' between a tracer updating x0 during a seccomp ptrace exit
(SECCOMP_RET_TRACE) and the seccomp filter being re-evaluated.
Rather than add hooks to the core seccomp code, instead move the
synchronisation code into the ptrace GPR and syscall setting code so
that 'orig_x0' is kept up to date with x0 whenever we're stopped on the
syscall entry path. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt792x: fix use-after-free in mt76_rx_poll_complete
A use-after-free issue occurs in mt76_rx_poll_complete due to a race
condition. The STA has already been removed, but the rx_status still
had a pointer to the wcid in the STA.
Set the links' wcid pointers to be NULL for a MLD in
mt7925_sta_pre_rcu_remove()
BUG: KASAN: invalid-access in mt76_rx_poll_complete+0x280/0x470
Call trace:
dump_backtrace+0xec/0x128
show_stack+0x18/0x28
dump_stack_lvl+0x40/0xc8
print_report+0x1b8/0x710
kasan_report+0xe0/0x144
do_bad_area+0x120/0x260
do_tag_check_fault+0x20/0x34
do_mem_abort+0x54/0xa8
el1_abort+0x3c/0x5c
el1h_64_sync_handler+0x40/0xcc
el1h_64_sync+0x7c/0x80
mt76_rx_poll_complete+0x280/0x470
mt76_dma_rx_poll+0x114/0x51c
mt792x_poll_rx+0x60/0xf8
napi_threaded_poll_loop+0xe0/0x450
napi_threaded_poll+0x80/0x9c
kthread+0x11c/0x158
ret_from_fork+0x10/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
swiotlb: Preserve allocation virtual address for dynamic pools
swiotlb_alloc_tlb() can allocate from the DMA atomic pool when a decrypted
pool is needed from atomic context. With CONFIG_DMA_DIRECT_REMAP, the
atomic pool is backed by remapped virtual addresses, which are not the same
as the direct-map addresses returned by phys_to_virt().
swiotlb_init_io_tlb_pool() currently reconstructs the pool virtual address
from the physical start address. For atomic-pool backed allocations this
stores the wrong address in pool->vaddr. Later, swiotlb_free_tlb() passes
that address to dma_free_from_pool(), which will fail to recognize the
chunk
Pass the virtual address returned by the allocation path into
swiotlb_init_io_tlb_pool(), and store that address in pool->vaddr. This
keeps the pool free path using the same virtual address as the allocator. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/dma: Check atomic pool allocation result directly
The non-blocking, non-coherent allocation path uses dma_alloc_from_pool(),
which returns the allocated page and fills cpu_addr only on success.
Do not rely on cpu_addr to detect allocation failure in this path. Check
the returned page directly before using it for the IOMMU mapping. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/tegra241-cmdqv: Require exactly one Stream ID for a vSID
tegra241_vintf_init_vsid() maps a guest vSID to a single physical Stream ID
taken from master->streams[0], and only warns when the device does not have
exactly one stream. A device with several streams gets only its first one
mapped, so a guest vSID invalidation cannot reach the others' ATC and IOTLB
entries; a device with none makes master->streams a ZERO_SIZE_PTR, read out
of bounds.
Reject the mapping with -EOPNOTSUPP if master->num_streams is not one. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/tegra241-cmdqv: Don't fall back to a freed smmu after devm_krealloc()
__tegra241_cmdqv_probe() uses devm_krealloc() to grow @smmu into the larger
tegra241_cmdqv, which frees the original @smmu once it relocates. A failure
after that returned NULL, and the caller then dereferenced the freed @smmu
on its fallback path.
Return an int and take @smmu by reference instead, then update *smmu to the
reallocated pointer after devm_krealloc() succeeds, so the caller and its
fallback path both use the live @smmu rather than the freed original. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/tegra241-cmdqv: Synchronize the error ISR against VINTF (de)init
A user VINTF is torn down by tegra241_cmdqv_deinit_vintf(), which runs from
the destroy callback and from the init-failure unwind in the alloc handler.
It clears the cmdqv->vintfs[] slot and lets the iommufd core free it, but
nothing serializes that against the error interrupt: tegra241_cmdqv_isr()
reads cmdqv->vintfs[idx] and dereferences the vintf. A concurrent error can
make the ISR read a slot mid-clear (a NULL deref) or use a vintf which is
about to be freed (a use-after-free).
deinit_vintf() also returns idx to the IDA before clearing the slot, so a
concurrent create that reuses idx can publish its new vintf into the slot,
only for this teardown to erase it again with the stale NULL store.
On the other end, tegra241_cmdqv_init_vintf() publishes a new vintf with a
plain store to the cmdqv->vintfs[] slot, and the ISR dereferences fields of
a published vintf such as vintf->base. A plain store gives no ordering on a
weakly-ordered CPU, and a stale VINTF_ERR_MAP bit on a reused idx can make
the ISR pick a vintf the moment it is published, before its fields are set
or tegra241_vintf_hw_init() runs.
The cmdqv->vintfs[0] slot stays NULL until tegra241_cmdqv_init_structures()
first creates VINTF0, so the slot 0 read needs the same NULL check.
Publish every slot with an smp_store_release(), and read each slot in the
ISR with an smp_load_acquire() under a NULL check, so the ISR always sees
a fully built vintf or NULL. Also make deinit_vintf() clear the slot, and
synchronize_irq() prior to returning idx to the IDA, so no vintf is freed
under a running handler and no reused idx is clobbered. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix integer overflow of user QP buffer size
set_user_buf_size() computes the QP buffer size by left-shifting the
user-supplied rq.wqe_cnt and rq.wqe_shift values as signed integers.
A sufficiently large rq.wqe_cnt causes signed integer overflow, which
is undefined behavior, and yields a small or negative buf_size, causing
ib_umem_get() to map a buffer smaller than the hardware will actually
write into.
Replace the shifts and addition with check_shl_overflow() and
check_add_overflow(), rejecting invalid user inputs.
Moreover, guard the identical shift computing qp->sq.offset in
_create_user_qp() before set_user_buf_size() is reached. |
| In the Linux kernel, the following vulnerability has been resolved:
thermal: intel: int3400: clean up ODVP on probe failures
evaluate_odvp() creates per-ODVP sysfs files before the thermal zone
and later probe resources are registered. The current unwind path only
calls cleanup_odvp() from the late sysfs failure path, so failures after
evaluate_odvp() but before that label, including
thermal_tripless_zone_device_register() failures, leave the ODVP files
and storage behind.
Move the ODVP cleanup to the common ART/TRT unwind path so every failure
after evaluate_odvp() releases the ODVP state. Also clear the cached
ODVP pointers in cleanup_odvp(), because evaluate_odvp() can already call
it for partial setup failures while probe continues. |
